How to Paint Primer Base and Clear - Three stage application

Рет қаралды 190,064

Күн бұрын

How to Paint Primer Base and Clear - Three stage application
In this video we demonstrate the three-stage application process of painting Primer, Basecoat and Clearcoat at the Anest Iwata UK training centre of excellence. We will discuss what spray guns we are using and their set ups such as W-400 WBX for Primer, LS-400 for Basecoat and WS-400 for Clearcoat and how split nozzle technology helps combat many issues the everyday painter may face. Through each stage of the application process, we also explain what signs to look for with regards to finish and applying technique.
Timecodes:
0:00 - Intro
1:49 - Spray gun choices
3:40 - Anest Iwata W-400 WBX - Primer
5:21 - Anest Iwata LS-400 Basecoat
10:29 - Anest Iwata WS-400 Clearcoat
14:20 - Final thoughts / Outro
Website: www.anest-iwata-coating.com
Facebook Page: / anestiwatauk
Instagram: / anest_iwata_uk
TikTok: / anestiwataukltd

Пікірлер: 140

@ams4328 2 жыл бұрын

The room is clean, white and clear to see everything. The setup is excellent, lots of space to move around properly. The instructor is bang on with the explanations and I appreciate it so much!

@falcon0351 2 жыл бұрын

People think painting is just put the paint in the gun and go for it.for some that may be true-but when you delve into it on a technical basis-there are so many variables involved in the craft..I have 4 Iwata SuperNova Guns and absolutely love them.I really enjoyed this video..very well done.Thankyou

@ivantieu6764 2 жыл бұрын

Yep so little emphasis is put on good spray guns. I myself have a supernova, and I never could get a finish I do now with my other cheaper guns.

@sphdg Жыл бұрын

Why would you need 4 super novas? Just wondering. Like 2 for the shop and 2 for home?lol

@falcon0351 Жыл бұрын

@@sphdg my mate retired from painting/so basically gave me his two-and I already had two..

@sphdg Жыл бұрын

@@falcon0351 sweet! Do you run them all the same fluid size?

@illygarcia5002 Жыл бұрын

I can tell u from experience I been to one of those training centers when the instructor had the perfect conditions inside the booth there was still orange peel in paint and clear he was a pro I do not know that but if u got the talent u can still get a good paint job from a conventional spray gun it's not the gun it's the painters technique and experience yhea gun will help to but if u have a 1000 gun and painters Inexpierenced u know the results

@billywilliams8833 2 жыл бұрын

This guy clearly knows what he is doing, Awesome amount of knowledge, Thank you so much 💖

@derekdelgardo2895 2 жыл бұрын

Very professional and comprehensive video, looking forward to many more from Iwata UK.

@abaidhussain3316 2 жыл бұрын

Thank you for the video tech tips now I know more about the clear gun can’t wait to use it in the booth

@tylerc7545 2 жыл бұрын

This is really a great video hope to see more from Iwata

@anestequipments8388 2 жыл бұрын

WOW superb, i love Iwata Guns.

@nacho5oh867 Жыл бұрын

Love this video!!! Awesome explanation!!

@dawnbaker4589 2 жыл бұрын

good video,very imformative.i have two iwatas 1.4 w400 and this always worked very well with damondclass anti scratch clear and a 1.3 wbx bellaria ,which always seemed to work v well with solvent basecoats.really like anest guns.moved on a long way from devilbiss jga 43 aircap @60 psi.

@maxmeyer74 2 жыл бұрын

Nice to finally see Iwata UK on KZfaq, very informative video keep up the good work.

@AnestIwataRefinish 2 жыл бұрын

About time right? Haha. Thanks for watching!!

@ANDY-we7mr 2 жыл бұрын

Spot on that well explained thanks with the settings helps a lot off people out who are just trying to learn out to paint

@AnestIwataRefinish 2 жыл бұрын

Glad we could help!

@WIJAYA_78 2 жыл бұрын

This video tutorial really helped me, especially in terms of the function of each spraygun, along with the technique of how to apply it. 👍👍👍Thank you, ....greetings from people 🇮🇩🇮🇩🇮🇩

@AnestIwataRefinish 2 жыл бұрын

That's great to hear. Thanks for watching!!

@zecarlos26 2 жыл бұрын

Great info many thanks

@jamespolucha8790 4 ай бұрын

I’m not a painter but I want to paint my motorcycle myself, I’ve been watching videos for a year now and trying to learn as much as I can , I’ve learned a lot from your video, thanks

@AnestIwataRefinish 4 ай бұрын

Thanks for the reply - we're glad you found value in this video. Check out the rest of the channel for different topics!

@jiujit49 2 жыл бұрын

I must admit your awesome ! A scientist. You have to keep making videos like this,like a real heavy course silver paint instruction video ,that gun might work for me!, thank you!

@AnestIwataRefinish 2 жыл бұрын

More videos to come on a range of different topics! Thanks for watching!!

@thehotrodstation3313 2 жыл бұрын

Well said. Very nice,no bull,comprehensive, strait "shooter" lol. And on top of that panels look great, even spraying them with the wrong hand! Hahaha🤘

@darioreyes7578 18 күн бұрын

Un saludo desde patagonia argentina gracias

@jamesmcconnon2 2 жыл бұрын

Great vid. I am using your guns foor wood and pvc refinishing but i find i still picked bits up from this. Your guns are the best btw! 👌

@AnestIwataRefinish 2 жыл бұрын

That's good to hear. Thanks for watching!!!

@rzezniqq 2 жыл бұрын

Hi, great video. I build scale models and I use Iwata miniature spray guns. I found this very informative. Please keep the tutorials coming. I wouldn't mind watching a very detailed one!

@popingamat 10 ай бұрын

live that mini gun

@fartguts 2 жыл бұрын

very enthusiastic about split-nozzle technology

@AnestIwataRefinish 2 жыл бұрын

Always!

@crissgarage4757 2 жыл бұрын

Fresh channel. 150th subscriber. Thank you for this very informative content, though i dont have any of these guns, hopefully i can afford this guns in the future. From 🇵🇭

@rodeliogarcia8498 2 жыл бұрын

nice video Sir.nice work..from philippines.keep safe Sir

@gultekintetik9152 2 жыл бұрын

Excellent work! 🖖🏻

@AnestIwataRefinish 2 жыл бұрын

Thank you! There's more to come!!

@eliseoherera4623 2 жыл бұрын

Yo tengo una d esas fantástico el acabado exelente herramienra para pintar

@damienwelch9067 2 жыл бұрын

I love the spray wid nova

@gtrdrejugfde288 2 жыл бұрын

I love iwata spray guns I have 3 lph80 and 2 lph300 and 1 w400 and 1 lph 400 hopping to get the supernova someday. Buy with confidence they all spray great I’ve been spraying with iwata 15yrs and they hold up great.

@ivantieu6764 2 жыл бұрын

Hoping to get a supernova? The lph 80 costs just as much haha

@jacksewell410 2 жыл бұрын

Yes I would like to see the hot dry ETS setup, because I'm in a hot dry climate

@darrell3118 2 жыл бұрын

Using a down draft you always start at the bottom of panel and work UP and let the OVERSPRAY fall on wet product , start at the top and you have dry ass overspray you are spraying over and it looks like you painted over sand , been and PPG Automotive refinish tech for 44 years and no matter what type booth you are in you always let your over spray land on WET product so you dont have a dry ass paint job! Been using Iwata for over 20 years now , and they all served me well. Great guns! I tested the SuperNova's a year before they were put in to production ( wonderful guns) and gave my input, only one thing I didnt like is they could have downsized the gun 25% for my small hands as I never switched to them from my W-400 's and my LPH-400's they are just easier to use!

@imranKhan-sb8kt 2 жыл бұрын

I like it

@user-kh3xj7pl5t 2 жыл бұрын

Greetings from Donetsk! Thank you for the colors of the Ukrainian flag! I have more than five years of lph400 for base(it is slightly slower, but more economical than LS and works perfectly at 1.1 bar) and ws400 for clear. Ивата рулит))

@user-yo7wr4xr5t 2 жыл бұрын

Приветствую вас ✌️🇺🇦

@leopolovin2118 2 жыл бұрын

donetsk part of Russian flag,

@roberthansjorg 2 жыл бұрын

Excellent! Now I have to check how much these guns cost.

@ludoviclouisdhon5292 2 жыл бұрын

Do you provide any hands-on training in the USA on your guns?

@mackodang681 2 жыл бұрын

Is the bes anest iwata good i like thanks

@eviljoker303 2 жыл бұрын

What nozzle size on the W400 for the wet on wet ?

@juniorizq2342 Жыл бұрын

My faves

@karimbenabdellah9292 Жыл бұрын

عمل رائع...

@fbyron100 2 жыл бұрын

Where can I purchase this guns? Information will be greatly appreciate it! I’m in NYC

@RobWillmot 2 жыл бұрын

Can you tell me what is the actual nozzel size in mm on the W400 LV WBX 1.4. I have A W77 with fluid tip N°22 which is supposed to be 2mm and actually is 1.7mm and a old Wider 85 11S and it says 1.4 on the box and is actual 1.1mm. I need to buy a new gun and am a bit worried about the fluid tip sizes. All the manufactures seem to lie about the fluid tip sizes.

@bustal2 Жыл бұрын

Amazing results! These guns are making wonderful job. I wish I had them. Do you sell some of these used guns perchance?

@AnestIwataRefinish Жыл бұрын

We do not currently supply any used guns, depending on where you are located talk to your local distributor and they should be able to help!

@diegorodrigues1369 2 жыл бұрын

Ótimo video muito bom , só poderia ter legenda em português , tenho 4 w400 belaria e 1 w400 wbx 1.3 , espero poder ver mais vídeos assim , o seu foi o melhor obrigado

@ibrahimsalag2052 2 жыл бұрын

شكرا على مشاركة الفيديو فقط كان من الأحسن توضيح نوع الألوان المستعملة في الرش

@redouanemimoun7654 2 жыл бұрын

GOOD

@Imwright720 Жыл бұрын

I spray outside, the conditions change minute to minute. Hope it doesn’t rain and get to gusty.

@rjmlondon 2 жыл бұрын

Hi i just bought the ATZ hte 1.8 and 1.3 for 1k primer, base and clear coat, i saw a few bad comments on this gun, can you please comment on it and advise thanks. I will be spraying black in a garage. Thanks

@Supanova70 3 ай бұрын

1st time i used the gun it was a water hose runs every where. Did you reduce wth activator ? by how much. Also my settings were ,Bottom wide open/trigger wide open and fan 3.5 out from closed fort he fluid.29 psi looks like you move way faster than i did.

@brewyawn3394 Жыл бұрын

This video is just what I've been looking for--and it comes from Iwata themselves!. I would like to know what face mask the instructor was using in the video, as I also wear eye spectacles.

@AnestIwataRefinish Жыл бұрын

In the video, we are using the 2020 Airfed mask. On our website we have more information: www.anest-iwata-coating.com/en/air-fed-mask-2020/

@brewyawn3394 Жыл бұрын

@@AnestIwataRefinish thank you

@ze_german2921 2 жыл бұрын

I just purchased a LS and WS 400 Supernova for Base and Clear Coat. What overlap % would you recommend for metallic to avoid Tigerstripes

@warrenlewis3977 Жыл бұрын

Try 75% overlap, also do a "cross hatch" patern

@radudanielman 2 жыл бұрын

👍👍👍

@btbd2785 2 жыл бұрын

So which exact model of the ws400 are you using. This is not a HVLP model correct? Do the make a 1.8 nozzle for the ws400 for primer?

@AnestIwataRefinish 2 жыл бұрын

Correct, in this video we are using the WS-400 Clear! LS-400 is HVLP! On WS we only go up a 1.5hd.

@Van-du8uz Жыл бұрын

Which one of this would be best for spraying lacquer on wood cabinets? And where can I buy it in the US?

@AnestIwataRefinish Жыл бұрын

Your best option would be the WS-400!

@freebusinees5668 2 жыл бұрын

HV & HP & LV = air or paint?

@johncassar2923 2 ай бұрын

Hi great video. I have borrowed a ws400 of a friend as I am thinking of buying one. I have noticed it flutters as I'm painting. It doesn't affect the finish but I'm finding it a bit weird. is this normal? 🇦🇺

@AnestIwataRefinish 2 ай бұрын

This could be the nozzle make sure it is tightened correctly. If issues continue you may need a new nozzle/needle set. it may also be worth checking there is no residue and give everything a thorough clean. Thanks Anest Iwata Refinish!

@danamcintyre3565 Жыл бұрын

What is the price on these guns ?

@stuartengland270 2 жыл бұрын

Hi there. On the basecoat stage the text said the fan was fully open . Is this true because I've never heard of any supernova user using full fan. To be fair I've never tried it either. Always had my fan screwed all the way in and 2.5 turns out.

@AnestIwataRefinish 2 жыл бұрын

Hello, Yep fan and fluid fully open! I'm sure we will elaborate further in future videos about settings and set ups!

@stuartengland270 2 жыл бұрын

@@AnestIwataRefinish thanks . I will give it a go 👍🏻

@zecarlos26 2 жыл бұрын

Me too

@ilu51vLRS 2 жыл бұрын

I've never heard any supernova user to ever run full fan either due to tendency for top and bottom heavy. However your fan looks very even in the video in the demonstration.. odd.

@AnestIwataRefinish 2 жыл бұрын

Many variables could make a pattern have a heavy top and bottom. Wrong pressure... Wrong set up for the paint system in use... Gun maintenance... Humidity and temperature... The list goes on! We often hear about users tweaking fan and fluid, Every painter is different. We actively encourage the discussion on gun performance as this helps us improve our products and services!!

@jeffreywong5112 Жыл бұрын

I like the paint suit

@AnestIwataRefinish Жыл бұрын

Our coveralls are available to buy! check with your local distributor to find out more!

@Mooncou Жыл бұрын

what are the ratios for wet to wet primer , basecoat and clear coat?

@AnestIwataRefinish Жыл бұрын

All mixed by scales.

@afranioreisleme6321 2 жыл бұрын

Very good Brasil 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷 Só faltou habilitar a legenda português Brasil 🇧🇷 e outras línguas obrigado 👍

@ednofelipevieira1456 6 ай бұрын

Habilita no celular. Simbolo engrenagem. Legendas tradução automática português...

@afranioreisleme6321 6 ай бұрын

@@ednofelipevieira1456 Obrigado, consegui 👍🇧🇷✌️

@deacdaniel6425 Жыл бұрын

Hi, LS 400 entech 1.2 et, is good for clear?

@AnestIwataRefinish 11 ай бұрын

You would preferably want WS-400!

@altayski3704 4 ай бұрын

What viscosity of material did you have?

@AnestIwataRefinish 2 ай бұрын

All mixed by scale and to manufacturer TDS. Base coat = 20-30 seconds DIN cup no. 4 at 20°C. Clear coat = 15-17 seconds DIN Cup 4 at 20°C Thanks Anest Iwata Refinish

@hectorotani27 2 жыл бұрын

howdy,what psi on clear?

@dollaarz 2 жыл бұрын

@greghernandez676 Жыл бұрын

22degC sounds bang on but 45% humidity seems high. I would also be careful about speaking loudly and directly at the panel like that as spittle could be an issue. My $.02.

@damienwelch9067 2 жыл бұрын

Ws 400 1.3 HD

@Красимправильнорф 2 жыл бұрын

Hello, can I use your video on my channel, I want to translate your video into Russian for my viewers who want to know better about IWATA

@richmondprofinishes 2 жыл бұрын

I watch your videos I wish I could understand them! Captions are in Russian too 😞 what don you think of the new kiwami guns you buse them alot. I can't understand if you like them or not

@Красимправильнорф 2 жыл бұрын

@@richmondprofinishes Hello! It is very pleasant that they answered! The new Kiwami is certainly better than the previous W400, unfortunately I have little quality information from the manufacturer about how the models differ from the old version. There is a technical part, but not specifically for spraying. It is clear that it is better and faster, but how it works is not) I think in Russia there are very few really good specialists who know the question as well as you, so I turned to you with a request to allow you to translate your video into Russian, I am not as literate as you ... Captions - subtitles can be translated and they will be displayed in English, for this video you need to watch on a computer, not on a smartphone and in the settings for the video, click the translate button and indicate which language. And with the WIEDER series, nothing is clear at all, what is the difference with Kiwami

@Красимправильнорф 2 жыл бұрын

@@richmondprofinishes Hello, so can I post your videos on my channel?

@richmondprofinishes 2 жыл бұрын

@@Красимправильнорф absolutely 💯 👌.

@user-dw2fq8ny2z Жыл бұрын

@@Красимправильнорф у Яндекс- браузера есть закадровый перевод иностранных видео. Может кому пригодится...

@harryferguson1256 Жыл бұрын

What is a bar equal to?

@AnestIwataRefinish Жыл бұрын

1.0 bar is the same as 14.5 psi. 2.0 bar = 29 psi.

@patrickpeterman8736 2 жыл бұрын

I have (2) Iwata guns- both are W-400 Bellaria /classic-1 has a 1.2 tip the other has a 1.3 tip is it possible to purchase the W-400 WBX AIR CAP&1.3 TIP FOR LAYING DOWN WET ON WET PRIMER??-thank you, PATRICK.P

@AnestIwataRefinish 2 жыл бұрын

Hi! sorry for the late reply, Yes you should be able to purchase the WBX air cap and nozzle from one of your local distributors!!

@damensutherland7081 2 жыл бұрын

Epa guidelines is another thing itself

@jimmydeltronic8453 2 жыл бұрын

Split Nozzle Tecnology!! WOW!! Look, I'm a fan of Iwata guns. I have a few. I paint professionally. I hope this will come as constructive criticism. The video is called "How to...." and after a long intro of work prep you go immediately to "Split nozzle..." (with no definition or introduction) ...cool. A novice will have no idea what you're talking about. Is this a training vid on application? or is it an introduction vid on fancy Iwata nozzles and gun tech? I appreciate the enthusicdam and the tech and Iwata, but ????

@carstyle089 5 ай бұрын

More Video

@AnestIwataRefinish 5 ай бұрын

More coming soon! Thanks

@user-em8pd2uk2m 2 жыл бұрын

Не согласен, факел с акцентированым центральным пятном лучше дает покрытие базы при перекрытии 50 процентов. Не люблю на базе I факел. With base I pattern has problems and spotting effect, it s obvious.

@mk3ferret 2 жыл бұрын

Worked at a shop recently, clowns were priming 180 grit with rattle cans then straight into the booth Many 20 cars were murdered I was done with that place in 2 weeks

@Hi99teckh 2 жыл бұрын

That gun same price for my scooteer 🛵 😅

@ivantieu6764 2 жыл бұрын

It’s cheap as hell considering the air fed respirator and associated hardware he is using will be 5k minimum. Also look at paper he is using to do the spray pattern tests! Looks expensive!

@slinkyjoe911 2 жыл бұрын

Awesome video but unfortunately we production painters, have to save All the material we can as possible... Hes an excellent painter, would he do things different, yes always!!

@felixtuason6046 Жыл бұрын

How much?

@AnestIwataRefinish Жыл бұрын

Prices will vary depending on where you are based! We'd recommend contacting your local sales branch for any support you may require!

@seandittrich9676 2 жыл бұрын

Holy loosing half of the material out the gun with to high pressure. Looks good if you want to spend double on paint!

@AnestIwataRefinish Жыл бұрын

In all of our videos we follow the correct TDS sheets provided by every paint brand!

@full_metal2452 2 жыл бұрын

Never paint jamb first. Always outside then jamb

@jondoe4667 Жыл бұрын

What is the reason for painting jam last?

@full_metal2452 Жыл бұрын

@@jondoe4667 if you paint jamb first any overspray from jamb lands on main surface. That overspray causes irregular surface tension for the paint to land on when you transfer to main surface. Possibly effecting how it lays down or metallic/Pearl orientation. If you spray main surface first and then switch to jamb any overspray from jamb will land on an already wet bed/surface and melt in flawless. This comes into play even more so when spraying tri stage coats.

@jondoe4667 Жыл бұрын

@@full_metal2452 makes sense. Thanks for explaining.

@nicholash8021 Жыл бұрын

Why do companies want to sell you a different gun for every kind of paint? If you know what you're doing, you can do it all with 1 gun (plus a mini gun) and a few different tips/caps. Maybe I'll use a cheap gun for primer if i know I'm going to sand anyway.

@nicholash8021 Жыл бұрын

...paint is a fluid, and when it comes to spraying it, the only real factor is its viscosity. Viscosity is addressed by tip/cap size (including cap air hole size) and air pressure. You don't need multiple guns to achieve this.

@reefhog Жыл бұрын

When you’re a simpleton, everything looks simple.

@nicholash8021 Жыл бұрын

@reefhog Apparently, when you're a simpleton, everything looks simple when you just throw money at it.

@reefhog Жыл бұрын

@@nicholash8021 You’re telling the story, simpleton.

@nicholash8021 Жыл бұрын

@@reefhog Maybe you can provide some insight instead of ad hominem.