How to Paint Your Chrome Exhaust Tips - DIY! GMC Sierra / Chevy Silverado

Рет қаралды 47,906

Күн бұрын

In this video I show you how you can paint your exhaust tips with a high heat rated enamel paint. The end result was exactly what I was looking for.
#exhaust #chrome #paint
linktr.ee/donslife - This has link to all of my products and discounts
Contact me for questions, collaborations and product reviews:
Instagram: / donslifechannel
email : donslifechannel@gmail.com
Product Links:
Viair 2.5 gallon air tank 150 PSI : amzn.to/3iacff7
Radenso Pro M Radar Detector : amzn.to/3EEz1oz
Universal Mirror Tap : amzn.to/3q8X9aB
Megulla Interior Ambient LEDs : amzn.to/3zjynbS
Under Hood Light Kit : amzn.to/3brYkOh
XPEL Paint Protection Film : amzn.to/3LjPaiW
Thinkware Q800 Pro here (US) : amzn.to/3MHTmtJ
Tailgate Step Lights US : amzn.to/3uucAwY
Tailgate Step Lights CAN : amzn.to/35ZQSr9
Auxbeam 3" LED Pod / Ditch Lights : shrsl.com/3nnvv (Code : Dons or Donslife)
Auxbeam 8-pod Rock Lights : shrsl.com/3m36a (Code : Dons or Donslife)
Auxbeam LED Switch Panel : shrsl.com/3m35z (Code : Dons or Donslife)
Rough Country 20" Black Series Dual Row Cree LED Light Bar w/Cool White DRL - 70920BD: - Out of Stock on Amazon
Putco 529005 Blade Quick Connect Harness For 2019+ Silverado/Sierra 1500: amzn.to/33EMvjX
amzn.to/3g8EGWB
Bilstein 5100 Front Shock Absorbers for AT4 & Trailboss amzn.to/3pgGVN7
Burger Motorsports BMS Stage 1 Tune (BMW) :
burgertuning.com/?rfsn=620226...
Dragy GPS Performance Meter :
dragymotorsports.com/?rfsn=57...
Fog Light Mod - GM Sierra : boostautoparts.com/
Get SLIPLO Here : amzn.to/3sjrZ0l
Exhaust : Here is a link for a louder version (ATAK) on Amazon. Mine is part #140774BC (BC = Black Chrome Tips). So many versions to pick from - do your research!
Borla-140775 Silverado/Sierra 1500 6.2L 2019 Cat Back Exhaust ATAK: amzn.to/3l9VYq6
AirLift 88388 LoadLifter 5000 for AT4 & TrailBoss : amzn.to/3wZnIQy
Air Lift 25980EZ WirelessONE Compressor : amzn.to/3y09CzI
BlueDriver Bluetooth Pro OBDII Scan Tool for iPhone & Android by Lemur Vehicle Monitors : amzn.to/3mtC8Vz
Veepeak OBDII Bluetooth Scanner for BMW/Bimmercode App: amzn.to/31V91kl
Veepeak OBDII Bluetooth Scanner 4.0 for BMW/Bimmercode App: amzn.to/31SIHaw
Hyperdip for emblems, wheels and trim: www.dipyourcar.com?ref=872
Plasti Dip for emblems, wheels and trim: www.dipyourcar.com?ref=872
Tint, vinyl, tools, and bolt on mods used on my vehicles products:
VViViD Premium Utility Blade (my favorite): amzn.to/39TIUP3
3M Knifeless Tape: amzn.to/3dHMlti
VViViD Smoke Black: amzn.to/3rXYno7
VViViD Dark Black : amzn.to/3d3tlH5
VViViD HEX+ Dark Smoke : amzn.to/3ae1bqW
VViViD HEX+ Light Smoke : amzn.to/2N18WHQ
Ronin Bullet Antenna Ford/Dodge : amzn.to/3mvoukM
Ronin Bullet Antenna Chevy/GM : amzn.to/3dMakYb
BMW Red M Buttons: amzn.to/3uuXyUS
BMW Red Start/Stop Button: amzn.to/3rZVuTg
Nextbase Dashcam HardwireKit: amzn.to/3mvpiGk
GMC Sierra AT4/SLT Chrome Grill Overlay (can be painted): amzn.to/3tcEdaZ
GMC Sierra AT4/SLT Chrome Grill Overlay Gloss Black: amzn.to/3wzalHI
Shine Armor Quick Coat Ceramic Coating: amzn.to/2OASS0j
DOSE Spider Silk: amzn.to/3h7v2EB
or VViViDshop.com
VVIVID Fuse 5 year 9H High Ceramics Hydrophobic Coating: amzn.to/2Rg1JFE
BMW F-Chassis BMS Hub Centric Wheel Spacers: amzn.to/322OTwF
BAK BAKFlip G2 Hard Folding Truck Bed Tonneau Cover: amzn.to/3qWuzLj
BAK BAKFlip MX4 Hard Folding Truck Bed Tonneau Cover: amzn.to/3s6rl4H
CTEK (56-926) Lithium US 12 Volt Charger: amzn.to/3gcuiP1
Richeer 1.5" Wheel Spacers for GMC 1500: amzn.to/3t4OJRn
Rexing V5 4K Budget Dash Cam : amzn.to/3Acvxou
Disclaimer: Some links may be affiliate links, meaning I earn a commission when you make a purchase. Thank you for the support!
Music Credits:
Dawn by MusicbyAden | / musicbyaden
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/...
Bliss by MusicbyAden | / musicbyaden
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/...
Summer Love by MusicbyAden | / musicbyaden
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/...

Пікірлер: 101

@Donslife 11 ай бұрын

linktr.ee/donslife - Links to all of my products and discounts

@iLLFarmacisto Жыл бұрын

I just did this to my at4. Pretty tough getting to those bolts. I used a dewalt flexible extension w/ 90 degree angle and another 10” extension on my impact driver. Worked out the best for me. Thanks for the idea! Love your videos

@teiganmilne4905 Жыл бұрын

Dang- gonna have to do that too!! Glad to see some Canadian content!!! Looks great!

@deerob7431 4 күн бұрын

Ok that dog was awesome

@adampallett8000 3 жыл бұрын

Looks way better black! Nice job 👍

@Donslife 3 жыл бұрын

Thanks Adam! I agree and thank you for watching!

@tdwnex Жыл бұрын

Looks great!

@tedpanos6320 Жыл бұрын

Dan, I have the key fob 2 and thats the one the dealership gave me, I order another key fob from Amazon and I watched few videos how to program the new fob and it doesn't work the way the video shows. Please post a video with better directions, your videos are so easy to understand. Thank you!

@Donslife 3 жыл бұрын

Sanding tip : You may want to use a lower grit such as 100,180 or 220. You need to really rough up the chrome finish so it is dull before paint. The paint I chose does not require a primer or adhesion promotor, but using some could be best!

@joeg.1119 2 жыл бұрын

You could of just gone to a exhaust shop and get a real exhaust tips for your GMC- AT4

@Donslife Жыл бұрын

@@joeg.1119 not in this small city

@AG-yv8yb 2 жыл бұрын

Great video. Painted mine with some high heat engine enamel (Rust-Oleum) lasted 6 months now have small area of peeling. Think I'm going to get them powder coated.

@Donslife 2 жыл бұрын

Powder coating would be the longest lasting option for sure! So many environmental variables lead to paint chipping and peeling. ✌🏼

@ericwitt4153 2 жыл бұрын

the ole hot dog in the tail pipe trick....... LOL lol

@Donslife 2 жыл бұрын

Hey, Let’s keep the talk clean 🧼

@Mrniceguy959 3 ай бұрын

What do you recommend for painting side steppers they are chrome I want to paint the black

@4961Studebaker 2 жыл бұрын

New AT4 on order. May have to try painting after running these through a media blaster

@Donslife 2 жыл бұрын

Mine held up and since then I have installed a new exhaust and tips. Media blasting and a primer would be better for the long haul. Honestly if I did it again, I would just use Hyperdip. They don’t get nearly as hot as I thought they would and some people have tried it and told me it works great. No blasting, sanding or scuffing.

@4961Studebaker 2 жыл бұрын

@@Donslife thanks for that tip. That sounds easier. I haven’t checked GM parts yet but they did offer the black “HDMI port” tips with the carbon pro package- not sure if they sell as a stand alone item. But hyper dip sounds like a great option

@joeg.1119 2 жыл бұрын

I went to a exhaust shop and bought some real exhaust tips for my trail boss silverado

@bfwaring 10 ай бұрын

Hi, how soon can I drive after the last coat?

@Synwright Жыл бұрын

Those really look much better than the chrome 😍

@Donslife Жыл бұрын

Powder coating would be the most durable, but at the time covid restrictions (here) were in full force and in this small city no one was available.

@Synwright Жыл бұрын

@Donslife Today while at our local GMC dealership, the service manager recommended a tent shop that they send their vehicles to for PPF (this local dealership is doing a courtesy delivery, we ordered our truck from a dealership in TN delivered to CA...anyway) the owner of this tent shop recommended the powder coating when I mentioned that we'd like to black out the chrome. 👍✨️

@the-handy-fixer 3 жыл бұрын

Smart dog!

@zainfadhil2588 Жыл бұрын

Do you have any treats inside those tips😂 beautiful dog

@Donslife Жыл бұрын

Secrets

@MirwaisOpenminded 3 жыл бұрын

Nice 👍

@catinapond Жыл бұрын

Hey Don. Love the video. Where did you buy the Tremclad ?

@Donslife Жыл бұрын

Canadian Tire 😂 For the record, more sanding with a heavier grit is the best prep if you decide to paint. Otherwise a sandblaster and powder coating will last longer but cost more

@catinapond Жыл бұрын

@Donslife I will keep that in mind. Thank you sir..

@haroldcotten1840 3 жыл бұрын

Smart dog👍

@rebel7835 3 жыл бұрын

Did the same on my exhaust pipes and paint peeled of in next day, do you think that paint is good for such temperature?

@Donslife 3 жыл бұрын

Mine is still holding on. Humidity while painting can play a part in the curing. Honestly since the tips aren’t part of the exhaust, mine don’t seem to get too warm. Based on that, I would probably do the following for a better result: Sand with 180, scratch them up more. A wire brush drill tip can do wonders too. Use a direct to metal primer. Use a paint of your choice for automotive applications. Rustoleum, Tremclad, etc. Depending where you live different brands are available.

@Wrexxxx Жыл бұрын

So how’s the paint? Is it still holding up after this long? Love your vids btw. I have a black sierra AT4 and it definitely needs some more blackening in places but I like the splash of red here and there. Not sure what to do with the badges as blacking them out may be too much.

@Donslife Жыл бұрын

Thanks for the support! I can’t say for sure how they held up since I replaced the exhaust and tips with a Borla system. If I did it again on the cheap and couldn’t get them powder coated, I would just use HyperDip or PlastiDip. They shrouds don’t seem to get to hot.

@Wrexxxx Жыл бұрын

@@Donslife thanks for the info. I used some Rustoleum ultra high heat paint on them. Didn’t have an air ratchet so I had to take the step out. But they look way better now. Is there a video with the way the new tips look? I really do like the rectangular tips and it would have to look really good to wanna change them.

@Donslife Жыл бұрын

Here is the Borla Stype with quad tips BORLA S-Type Cat Back Dual Exhaust Install Review 2019 - 2021 GMC Sierra Chevy Silverado 6.2L kzfaq.info/get/bejne/ouCanNOJs6yVhYE.html

@Wrexxxx Жыл бұрын

@@Donslife I have to quit watching your vids or my ass is gonna end up getting divorced or broke and homeless! And you have the cold air intake I’m looking at as well. Wow, the truck sounds nice! Good to know it’s not crazy loud in the cab as that was a concern. Thanks for the reply Don!

@JB-TM-2023 3 жыл бұрын

Hey Donslife I did the same as what you did for painting my tips on my 2020 gmc. But after 2 weeks it is starting to peel off I used and done everything you did. Would you know my issue? Any info would be great please. Also I been learning some stuff from you. Great work.

@Donslife 3 жыл бұрын

Sorry to hear Jade. Usually paint adhesion issues are from the following: Surface has insufficient surface tension: sand more, try using a 180 or 220 first. A wire brush drill tip can scratch up the surface well too. For any major scratches use a 320 or 400 grit to clean them up so they don’t show through the primer. Second issue could be the primer isn’t working well on bare metal. A DTM (direct to metal) primer or and etching primer should work. Also too much humidity will inhibit the paint from coalescing or bonding with strength. Light coats with the primer first is critical in many cases. If you only have some spots peeling, you can probably sand down or wire brush those then, prime those spots, lightly and all of it, wipe it clean and give it all some new top coats.

@JB-TM-2023 3 жыл бұрын

Thanks for the info I used the tremclad paint high heat.mind you I waited 5 minutes between coats maybe that wasn't enough? With that paint I probably don't need primer right? Also start with a light coat?

@Donslife 3 жыл бұрын

If you are using the same paint, you shouldn’t need a primer. Maybe sand deeper, it certainly won’t hurt. Pay most attention to where the first peeling occurred. Apply some ‘tack’ coats with more dry time in between maybe. You could do a primer still. Might be better for long term. I have my new exhaust coming soon that will eliminate the factory tips, so I probably won’t know if they will last years with that paint.

@joed82 5 ай бұрын

Nice job , how does it hold up against road salt and snow ?

@Donslife 5 ай бұрын

Not sure. I have an aftermarket exhaust now which replaced the tips.

@Dnasty1 2 жыл бұрын

Why did you chose not to use primer and clearcoat? I was getting ready to paint my attached tailpipes gloss black and wanted to do it in a way that doesn't result in future cracking/peeling.

@Donslife 2 жыл бұрын

The paint I used had a built in primer. I would still recommend a primer but you might want a high heat version. Powder coating will be better but more costly

@alxxxnb3 2 жыл бұрын

Did you have to remove the black steps on bumper to get to the top 2 bolts?

@Donslife 2 жыл бұрын

No I didn’t. I was able to get my air ratchet fished in there. Bit of a pain and removing the plastic corner steps would help with access

@Boobtube. Жыл бұрын

we all know you hid a doggie treat in the exhaust to get dog to go after it. lol

@MAALEMAN1025 2 жыл бұрын

@Donslife Do you know rhe size of the exhaust pipe to install an exhaust tip?

@Donslife 2 жыл бұрын

2.5" openings hidden behind the HDMI shaped covers (they don't touch either)

@SharpTabs 3 жыл бұрын

Hi! Do you think I can put exhaust tips into the sandblaster and then paint them? It won't destroy them?

@Donslife 3 жыл бұрын

Would depend on the sandblasting method, but it could turn out really good! Mine are holding up but I would use a primer if I did it again and sand heavier.

@SharpTabs 3 жыл бұрын

@@Donslife Thanks!

@chrislee326 6 ай бұрын

Don't do this if you use any color than black. I just color matched mine white with clear coat and within a day the hot exhaust burns the paint. THESE TIPS DO GET HOT

@mattsutube 4 ай бұрын

Do they make BBQ clear paint?

@IsThatJustDex 3 жыл бұрын

You’re great man 😂😂😂😂 “epic, fantastic” even

@Donslife 3 жыл бұрын

😂 I am a fool

@footballfan2204 3 жыл бұрын

Looks really nice.....how has the paint held up over the past few months? Mind sharing some current pics? If you DM me I can send you my email......I just picked up a Trail Boss and want to do this to the chrome tips but unsure on matte black vs gloss black

@Donslife 3 жыл бұрын

I have my channel email in every video description

@footballfan2204 3 жыл бұрын

@@Donslife whoops I missed that. Just sent you an email, thanks!

@matthewweir6345 3 жыл бұрын

Did you take the Sierra badge off of the back?

@matthewweir6345 3 жыл бұрын

I have the same truck, Summit White but with the 3.0. Definitely interested in what you have going on with yours.

@Donslife 3 жыл бұрын

Yes Sir! I felt it was just too much noise

@chivy2460 Жыл бұрын

I'm planning on doing the same. The Chrome just doesn't go on this theme

@Donslife Жыл бұрын

Maybe try plasti dip or hyperdip. I learned after the tips don’t get too hot and you can save yourself some prep time

@monsteroriginal 3 жыл бұрын

what size rachet did you use?

@randy0552 4 ай бұрын

You'll need a 7 mm and a 10 mm socket. You'll need a T15 torx to take off the steps on the sides of the bumper.

@jeremyferguson6945 4 ай бұрын

How's are they holding up now??

@Donslife 4 ай бұрын

Impossible to say. They are gone. I replaced the exhaust about 6-8 months later

@badbreathinmymouth 2 жыл бұрын

That’s funny, my dog said the same thing about my exhaust tips. It could have been the 2 kilos of cocaine in my trunk though.

@ChrisPBacon2010 2 жыл бұрын

7 months in, can we get an update on how they're holding? Possibly even a picture?

@Donslife 2 жыл бұрын

Sorry, I removed them when I installed my Borla exhaust. On the inside of one there was a small amount of wear. It would probably have been due for a touch up this fall

@monsteroriginal 3 жыл бұрын

3/8 or 1/4 inch rachet?

@Donslife 3 жыл бұрын

It was a 3/8 air ratchet. You can use a normal ratchet but you’ll hate your life. One tip someone shared on a forum was popping out the side steps from inside the bumper. Then the tips are very accessible

@zainfadhil2588 Жыл бұрын

Great video! I belive going for a black round tips would make it look nicer. Those rectangular chrome tips are not for this car

@Donslife Жыл бұрын

I have quad round tips now with my Borla S-Type exhaust

@zainfadhil2588 Жыл бұрын

@@Donslife which tips have you used?

@Donslife Жыл бұрын

@zainfadhil2588 Here is the video: BORLA S-Type Cat Back Dual Exhaust Install Review 2019 - 2023 GMC Sierra Chevy Silverado 6.2L kzfaq.info/get/bejne/ouCanNOJs6yVhYE.html

@Italianborn 2 жыл бұрын

Respectfully..can’t paint on chrome.. I’ve tried everything, it will peel or have rock chip in it..

@mattsutube 4 ай бұрын

Better surface area

@jmackinjersey1 3 жыл бұрын

Or buy the black ones. Not trying to sound rude, just saying that not everyone has the equipment to do this.

@Donslife 3 жыл бұрын

For sure! This is intended for people that may want to.

@joeg.1119 2 жыл бұрын

You could of just gone to a exhaust shop and get a real exhaust tips for your GMC- AT4

@JayHunxho1 3 жыл бұрын

Even she knows😂😂

@Donslife 3 жыл бұрын

Very smart Dog!

@georgewilliams6328 3 жыл бұрын

I think he put a doggy treat in there! You saw her using her paws trying to pull it out whatever was in there 🤣

@DKLabs99 3 жыл бұрын

You barely showed us the final result!

@Donslife 3 жыл бұрын

I would be glad to share some more via email or something! Sorry about that 😞

@DKLabs99 3 жыл бұрын

@@Donslife all good. Would have liked to seen a better shot of them installed. Great job painting those

@Donslife 3 жыл бұрын

I just realized I have a slow motion shot on my phone that didn’t get edited into the video! Live and learn. Thanks for the support!

@DKLabs99 3 жыл бұрын

@@Donslife I like diy videos more than anything. Thanks for the tips to uninstall those exhaust tips.

@Donslife 3 жыл бұрын

Anytime, and if you have any requests or questions, let me know!

@kc8653 2 жыл бұрын

Take the Hdmi tips off. They don't belong.

@Donslife 2 жыл бұрын

Was always the plan. Had to wait 3 months for the exhaust. Here is the video description: BORLA S-Type Cat Back Dual Exhaust Install Review 2019-2021 GMC Sierra AT4, Denali, Trail Boss 6.2L