Рет қаралды 11,902
Sometimes the Turbo freezes or displays an error screen that can be resolved by holding down the power button. In this case you will have to perform a hard reboot.
1. Power off your system
2. Remove all the probes from the triple connector
3. Disconnect the triple connector
4. Remove the clamshell from the cart
5. Remove the battery from the clamshell
6. Replace the battery
7. Reconnect the triple connect
8. Reconnect the clamshell to the cart
9. Replace all the probes into different bays from where they were originally connected.
The removal of the probes and reconnection of the probes can be done at any point before reconnecting the clamshell.
Blog: takeokun.com
Twitter: @takeokun
KZfaq: itakeokun