🔥 How to Paste PAPER TAPE (Inside Corners) ➤ • 🔥 Cómo Pegar CINTA de ...
✅ If you are going to do some work for PLADUR, and you are going to choose to hire a company to do it, I have created a short guide to help you analyze the budget and avoid common deceptions in the sector. Head over to www.tutorialcreativo.com/guia to download it.
🔻Mount ceiling with omegas ☞ • 🔥 Cómo Montar Techo PL... 🔻How to paint plasterboard ☞ • 🔥 Cómo Pintar TECHO Pe...
In this video you will see how to place a metal corner for PLADUR.
You will also see how to fill the ceiling that I made under a stair ramp, with omegas and anti-humidity plasterboard.
Galvanized rolled steel angle for plaster. Material with great resistance to corrosion and great durability. For the protection of plasterboard systems.
If you liked this video, don't forget to click I LIKE it and share it with your friends.
Do you want to find out every time I upload a new video of crafts, tricks, decorating ideas, inventions and some other interesting and fun things? Well, don't forget to subscribe to my channel :-D
Video transcript:
We are going to place a metal corner.
First we will glue the paper tapes at the joints.
We put a lot of pasta on the board.
We place the paper tape and squeeze it hard with the spatula.
In this case we will stick a paper tape on the side through the opening we had and thus avoid cracks.
We put the tape and tighten it.
We put pasta on both sides of the corner.
We place the corner and tighten it.
We cut the missing piece.
We place it and we put it well in line with the other.
We pass the spatula to remove the excess pasta.
Once it's dry, we'll give you a load of pasta.
It is better to do it when it is dry, because that way we avoid moving it when applying pressure.
We give it smooth without squeezing the spatula or the trowel.
Don't worry if there are streaks left. When drying they scratch.
Already subscribed? Well, I thank you. But if you are not, you are already taking time. Subscribe!
Once dry, we scratch the imperfections with the spatula.
We give him a second hand of pasta. In this case, we do pressure with the spatula or the trowel.
The ideal is always to finish against what is already pastured.
If you want to know how to assemble this plasterboard ceiling or paint it, I leave you the link in the information box.
If we see that you need it, we give you a third coat for a better finish. Then it will be simply to pass a fine sandpaper.
If you are going to do some work for PLADUR, and you are going to choose to hire a company to do it, I have created a short guide to help you analyze the budget and avoid common deceptions in the sector.
Head over to www.tutorialcreativo.com/guia to download it.