How to Plot Degradation data in origin | Degradation data Interpretation

How to Plot Degradation data in origin | Degradation data Interpretation | All about Degradation |

Рет қаралды 22,127

3 жыл бұрын

Hi
Welcome to Science and analysis.
In this video, you will learn the data plotting of any kind of Degradation data in origin and its interpretation through the C/C0 curve and its manipulation to first-order rate kinetics then you will learn its fitting in first-order rate kinetics...
you will also learn, how to do linear fitting in origin, how to put formulas in origin.
you also learn the decoration of any graph in origin for submitting to any publication house.
Most important, in this video you are going to learn, How to export an origin graph.
• How to plot Degradatio...
/ @scienceanalysis
#Degradationdataploting
#Degradationdatainterpretation
We are continuously working hard to provide you with the best knowledge about the software used to plot and analyze the data in Research.
Thank you for watching this video.
Please share this video if you Like and subscribe to this channel.
please subscribe to our other channel that provides math and chemistry education to school-level students...
#CarrierStriveAcademy
You should also visit
NanoMatWorld for more such videos
if you want to relax you can watch some natural views by subscribing our channel free of cost
BharatiyaPanorama
photocatalysis
photocatalytic degradation of dyes
degradation data plotting
degradation data analysis
first order rate kinetics
pseudo first order rate constant
fitting of data in origin
origin data plotting
basics of photocatalysis
basics of origin
how to plot data in origin
photocatalysis for dye degradation
photocatalytic degradation of dyes
pollution
pollutant degradation
pollutant degradation mechanism
how to analysis degradation data
how to export origin graph
curve fitting in origin
best data fitting for publication
NanoMatworld
#Carrier strive academy
NanoMat world
#How to plot Degradation data in origin
#Dataploting in origin
#Data decoration in origin
#Data interpretation in origin
#C/C0 curve calculations
#first order kinetic rate fitting in origin
#firstorderratekineticfittings
#Data decoration
#datadecoration
#decoration of data in origin

Пікірлер: 79

@nidakhan8376 Жыл бұрын

Its really amazing..I was so confused before this and begging for help to learn the setting of graphs..you made it easy for us..thank you so much sir

@lalitasharma7303 Жыл бұрын

You thought in so good manner...please upload more such informative videos

@ScienceAnalysis Жыл бұрын

Thanks for the compliment

@mamunurrashid4877 2 жыл бұрын

I am from Bangladesh. It is very helpful video

@ScienceAnalysis 2 жыл бұрын

Thank you....and glad it works for you..

@RabbanKhan-so1bj Жыл бұрын

thank you for uploading this content

@ScienceAnalysis Жыл бұрын

Our pleasure!

@ali-rf5iy Жыл бұрын

Helpful video

@akshaykumarboltey Жыл бұрын

Nice

@rajukaushik7314 3 жыл бұрын

very nicely understood

@ScienceAnalysis 3 жыл бұрын

Glad, it works for you

@chetnamadaan7530 2 жыл бұрын

Hi Sir, Thank you a lot for making such informative video. Apki sari video informative h

@R4Kaushik 10 ай бұрын

very nice

@ScienceAnalysis 10 ай бұрын

So nice

@pankjain25 2 жыл бұрын

Very Nice explanations. Bravo

@ScienceAnalysis Жыл бұрын

Many thanks!

@bairavbitesseries6796 2 жыл бұрын

Easy to understand ur explanation

@ScienceAnalysis Жыл бұрын

Thank you

@bairavbitesseries6796 Жыл бұрын

Along with data sheet, if u share it will be very useful sir

@dineshthakur9017 2 жыл бұрын

Bhagwaan apko khus rkhe

@shaswatvikramgupta 2 жыл бұрын

Excellent 👏👏👏

@ScienceAnalysis Жыл бұрын

Thank you! Cheers!

@aneebafatima8184 Жыл бұрын

Hi Great video, can you please share this data sheet of origin with us please! So Thank full to you!

@ScienceAnalysis Жыл бұрын

How I can share it

@sureshkumarsundaravel9674 Жыл бұрын

Sir, Very informative!!, Please add subtitle in English. So that it would be easy for every one to understand clearly.

@ScienceAnalysis Жыл бұрын

Ok next time

@surajitghosh6619 Жыл бұрын

i am not getting the peak at same wavelength for each degradation curve. So what should i do? Should i have to find the peak at each curve manually and take the corresponding absorption value ? or should i take the particular wavelength peak at which molar absorptivity of my material is measured?

@ScienceAnalysis Жыл бұрын

How much it changed ?? Does it changes regularly for each time point ?? You also check the pH changes during the reaction

@deys4492 2 жыл бұрын

Well explained.. It helped me really.. Thank you

@ScienceAnalysis 2 жыл бұрын

Thank you...

@rananoman8239 Жыл бұрын

At a.u should we write scale number on y axis

@ScienceAnalysis Жыл бұрын

You should....it's upto the person bro..

@shalinie-learning Жыл бұрын

If R square value is less than 0.95 or not near to 1 then what type of kinetic order is this

@ScienceAnalysis Жыл бұрын

You have to check it again with other order rate kinetics fitting

@ahmedmalik9974 28 күн бұрын

Kitna axha log hain na ap log

@joninigam7429 3 жыл бұрын

I can't understand the basic principle of the photocatalytic degradation mechanism. Actually, I am working on TiO2 based photocatalytic systems for pollutant degradation. Can you please some videos on this topic. It would be a great help from your side to researchers in this field. I think I already commented on some of your videos. Please have a look at this matter.

@ScienceAnalysis 2 жыл бұрын

Hi Joni, thanks for commenting. I really appreciate that you are interested in photocatalysis, and sure I will make some videos on this topic soon...

@mdborhanuddin8295 Жыл бұрын

Thank you sir, can you give me this data, I want to practice it.

@ScienceAnalysis Жыл бұрын

This is very old one. But I will provide some similar data set, if you want

@nicheaaja-zi8cl 5 ай бұрын

beautifully explained

@ScienceAnalysis 4 ай бұрын

Thanks for liking

@NS-my1hb 2 жыл бұрын

Sir agr R2 ki value 0.4 aye th phr knsa order fit hoga plz us k lye b bta dn

@ScienceAnalysis Жыл бұрын

Bhai, R2 ki value 0.4 ka matlb hua....Jo bhi order aap fit kr rhe ho vo uss order m fit nhi hoga.... Try with 0 or 2nd order rate law

@NS-my1hb Жыл бұрын

@@ScienceAnalysis g tu baqi order b apply krna sekha dn zero or second plz

@syedhaider3854 10 ай бұрын

if R (square) is around 74, what will be order of reaction? Thanks, waiting your response.

@ScienceAnalysis 10 ай бұрын

Hi, R2 does not define the order of the reaction. It is just a parameter to define your fitting quality. As you are fitting your values that were calculated by using first or 2nd or 3rd order reaction rate equation, this parameter will only tell you that the fitting is perfect or not..

@syedhaider3854 10 ай бұрын

thanks@@ScienceAnalysis

@ScienceAnalysis 2 ай бұрын

Welcome

@Joansteen 2 жыл бұрын

Iam not getting these curves from the data you provided pls help me

@ScienceAnalysis 2 жыл бұрын

Hi bro, please tell me how can I help you

@Joansteen 2 жыл бұрын

@@ScienceAnalysis sir the data which you were using in wavelength vs absorbance graph that i copied from you tube to excel an pasted on origin pro to get the same curves but i am not getting those curves instead of that i am getting slopy lines

@muhammadyasar3213 Жыл бұрын

Respected Sir, can we calculate the First order /Sceond Order without determining the slope?

@ScienceAnalysis Жыл бұрын

Dear Yasar, there are many other ways that can be used to check whether the reaction Is 1st/2nd order. 1. You can plot the graph between remaining concentration of pollutant and reaction time, by observing it's nature you will identify the order. 2. You can check the corelation between different half life's....it will also suggest the order..

@yutube-bx8dv 6 ай бұрын

@user-dh6md8cu2u 11 ай бұрын

Sir, how can we get this 0min spectra. can you please tell me?

@ScienceAnalysis 10 ай бұрын

Why not

@ScienceAnalysis 10 ай бұрын

I will be happy to discuss

@user-dh6md8cu2u 10 ай бұрын

Please explain

@ScienceAnalysis 3 ай бұрын

Are you doing photocatalysis??

@user-gk8dk2yp3p Ай бұрын

Nicely explained

@ScienceAnalysis Ай бұрын

Thank you 🙂

@ashithakishore7389 4 ай бұрын

May I know whether you are taking the absorbance value as concentration in C/Co plot or are you conducting any calibration of the dye solution before the experiments and calculating the respective concentration based on the absorbance you obtained from this....

@ScienceAnalysis 4 ай бұрын

You have to make a calibration curve for accurate and precise results. However for the first glance you can take initial concentration as C0.

@shalu2insta 5 ай бұрын

Hi, good explanation. Can you tell me what is control jn your case because in dye experiments 0 minute reading is that reading where no catalyst is been added. I have this doubt kindly explain.

@ScienceAnalysis 5 ай бұрын

Control is the reading that is having no catalyst, After that is was stirred with catalyst to perform the adsorption. After adsorption the reading named is 0 min. That is just before the light on.

@shalu2insta 5 ай бұрын

@@ScienceAnalysis Thanku

@ScienceAnalysis 2 ай бұрын

Welcome

@NS-my1hb 2 жыл бұрын

Baqi kinetics order ksy fit hn gy wo bta dn plz

@ScienceAnalysis Жыл бұрын

Bhai, explain kro...kya poochna chahte h aap

@NS-my1hb Жыл бұрын

Mn ny pocha h k agr hm ny second order apply krna ho tu ksy krn gy

@NS-my1hb Жыл бұрын

Mtlb agr R2 k value 0.4 h tu order fit n ho rha firsr tu 2nd order or zero order ksy apply krn gy plz wo b bta dy