How TO: Polaris RZR XP 1000 SuperATV Heavy Duty Arched Boxed Rear Radius Arms Install 2013+

Рет қаралды 13,890

3 жыл бұрын

SuperATV Heavy Duty Arched Boxed Rear Radius Arms/Rods for Polaris RZR XP 1000 / XP 4 1000 (2014+)
LUG NUT SIZE IS 17MM******
Super straight forward install, this works for all rzr 1000 2013+ models.
Back bolts require 18mm wrench amzn.to/3njSY7W
Video taken with GoPro HERO8 Black Link below!
amzn.to/38BBBKG - GoPro HERO8 Black
amzn.to/3hSNW0W - SuperATV HD Radius Arm Kit
Music: I Need You
Musician: LiQWYD
URL: / liqwyd
Mayham Shop mayhamranch.com/shop/
DISCLAIMER: In this video description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This help support my channel and allows me to continue to make videos. Thank you for the support!

Пікірлер: 17

@eldraze7772 3 жыл бұрын

That EG in the back though!!🔥

@mayhamranch 3 жыл бұрын

Currently in paint and body, then off for kswap AWD :p

@cameroncooper9673 3 жыл бұрын

Mine came with these 2 like 1/2 inch spacers do they go on the top or bottom of the non heim end?

@itskerbc 2 жыл бұрын

How are these compare to the assault rods?

@mayer7196 3 жыл бұрын

How does the plate go on? It’s bent.

@mayhamranch 3 жыл бұрын

It fits flush.

@mayer7196 3 жыл бұрын

@@mayhamranch I get that but if u look at the plate, and lay it flat, there is one side that sits higher than the other.

@mayer7196 3 жыл бұрын

@@mayhamranch Even in you video when u have the plate on the ground you notice one end is on the ground flat and the other is in the air.

@mayhamranch 3 жыл бұрын

@@mayer7196 I see what you mean, the one end has a concave to it. It fit up fine. I guess they just designed it that way to clear some models. The hit is VERY universal for a broad range of years and models.

@mayer7196 3 жыл бұрын

@@mayhamranch Ya, the more I look at mine, the more mine goes the other way ( I have a highlifter). Its because there is a lip around the top bolts and none on the lower bolts, so mine would have to concave DOWNward. Thanks for the reply. How is it holding up?