How to Port and Shim a Honda Oil Pump D or B Series

Рет қаралды 20,764

4 жыл бұрын

In this video, I show how to port and shim a d16y7 oil pump. The process is the same for other D series and B series engines.
Link to the video I watched before attempting the install:
• ▶️Oil Pump: How To Por...
As an Amazon Associate I earn from qualifying purchases.
Link to a new oil pump if you need it:
amzn.to/36tWlT8
Follow me on Instagram: @ej6nicky
Song Used:
Aeden & Um41K - Ain't Nobody Perfect

Пікірлер: 39

@jimwinchester339 Жыл бұрын

3:20 You should be putting a small block of wood behind the ring. That way you don't have to worry about bending it while drilling. Achieves straighter drilling.

@dragonmantuning3792 2 жыл бұрын

I did this to my flux capacitor thank you for the video

@AdobeD1N0 3 жыл бұрын

Respect to the man that spent $450 on a Milwaukee 1/2 impact wrench for one bolt in one video! Ill tell ya man, your'e gonna be sooooo glad you have a strong impact with good break away torque!

@mawibo376 3 жыл бұрын

Bought the same impact for crank/axel bolts. 100% worth it.

@jerrylachlan1163 2 жыл бұрын

you all prolly dont care but does anyone know of a trick to log back into an instagram account..? I was dumb lost my login password. I appreciate any tips you can offer me.

@alfredoaldo8343 2 жыл бұрын

@Jerry Lachlan instablaster ;)

@jerrylachlan1163 2 жыл бұрын

@Alfredo Aldo thanks so much for your reply. I found the site thru google and Im waiting for the hacking stuff atm. Seems to take a while so I will get back to you later with my results.

@jerrylachlan1163 2 жыл бұрын

@Alfredo Aldo It worked and I actually got access to my account again. I'm so happy! Thank you so much you really help me out !

@bdude1104 3 жыл бұрын

What rear bumper is that on the white car in the intro?

@guilhermeofrances 3 жыл бұрын

How much oil pressure more with this terminal?

@gingersquatch9844 Жыл бұрын

I did this to my D16Y7 but smoothed inlet and outlet along with drilling the seal drain port and hogging out the output to match the block. I now run 12 psi at idle and 96 psi at redline.

@trevorpetersen9061 Жыл бұрын

Is 96psi,, good?

@ll.7927 10 ай бұрын

@@trevorpetersen9061it depends how high he’s revving but It could cause leaks if u go to high

@joeysmokez8423 2 жыл бұрын

Can I go .005" washer?

@ricardogallegos2046 Жыл бұрын

Could you please write the size of the bits you used.

@jurielrivera7521 3 жыл бұрын

What you did to elevate the PSI on the oil pump, would that work on a Vtec D16Y7 engine?

@dragonmantuning3792 2 жыл бұрын

Yes

@Dave_Bee Жыл бұрын

So does shimming the spring increase idle pressure or just wot ?

@NickSabella Жыл бұрын

Idle too

@Anthony11qq Жыл бұрын

I'm wondering if u ended up with a massive leak from that o ring having altered the design. Seems like the flow would be heavy to the machined/roughly drilled side

@NickSabella Жыл бұрын

Nope 2 years later and it's still fine!

@RowdyAudi666 3 жыл бұрын

🤣the drilling montage

@MikeKollin 3 жыл бұрын

If we just do the shim, will that help at least a little?

@NickSabella 3 жыл бұрын

Yes it will increase psi which will also slightly increase the oil volume. Just shimming will still help a lot.

@MikeKollin 3 жыл бұрын

@@NickSabella Cool, Thanks!!

@schubre Жыл бұрын

It will only help with your MAX pressure, as it is a pressure relief. If you are trying to improve warm/idle/cruising oil psi, shimming will do nothing.

@vargedavis1023 3 жыл бұрын

How big was the drill bit

@wyattgrant9598 2 жыл бұрын

That’s what I’m saying

@iRiskitall 4 жыл бұрын

2nd

@sungodman001 3 жыл бұрын

Why not to shim more? What will happen if shim to maximum?

@NickSabella 3 жыл бұрын

If you build the pressure too much you'll cause seals to fail prematurely

@sungodman001 3 жыл бұрын

@@NickSabella thanks man

@averyalexander2303 2 жыл бұрын

If you shim the spring too much, you could increase the oil pressure too much and cause seals to fail and you may even blow up the oil filter on cold starts when the oil is thick and pressure is at its highest. The pressure relief valve is there for a reason. I shimmed my spring a bit too much and now I peg my 100 PSI oil pressure gauge at 2K RPM with cold oil but once its warmed up it maxes out at around 80-85 PSI, which is fine. As long as I keep the RPMs low while the oil is cold like I always do it should be ok. As long as you aren't going too much over 100 PSI while cold you shouldn't have any problems. Hope this helps!

@sungodman001 2 жыл бұрын

@@averyalexander2303 thanks again👍 last question..how much mm that you shim？ Just like in the video exactly？