That is the nicest shed slab ever. Great work. Love the dedication to getting perfect results

You definitely make it look simple and DIY friendly. Doesn’t seem so intimidating.

Clean and tight slab for sure - should last many decades!

I know what this job takes... and I give credit to your lower back... cuz you sure as hell got one strong lower back..... RESPECT

Beautiful work - I tried a bit of screening last year and didn't do too badly but I love what you've done here as a professional in your trade. Keep it up and thanks for the insightful and educational video. Well done ❤

Last year I poured a slab for a new shed I built what a difference over buying a shed with a wood floor. Tuff shed had no problem with building over the concrete slab they tied into the slab with the walls and now it's liking walking into a small garage.

Thanks guys. Starting my shed soon so perfect timing.

This is an art form. Nicely done.

I like your dedication for what you love to do and bring those greens!!! Great video/tutorial.

Very nice. Im a DIY guy. Never pissed w concrete. Plan on doing something about this size when the weather breaks. Thanks for the tips

Nice job. Clean work and I am glad you worked the excess concrete off of the bottom of the pour after you stripped the forms. Good clean work.

Enjoyed the vid. My brother and I are going to pour a pad for his shed. Neither of us have done it before, so this should help. Thanks!

5/10/23; great job, lots of hard work, you learned very well from your dad. Excellent job! Give us more!💪👍👏✅️

Well done! Thank you for sharing. I just did my 1st concrete slab, 5' x 7' x 3.5", did a "dry pour", it is curing now, looks o.k., but some rocks on surface. After reading your comment about crumbling, will likely forgo "dry pour" and go with traditional mixing in the future.

Beautiful job. Always great work! Video well put together too. 🤙🏻👍🏻

Looks great man. This will help me a lot! From one tradesmen (electrician) to another, clean work!

Very clean I did one if these for my Mom's few years ago

I did my own pad like this last summer. Got a couple quotes for around $2500 in Canada. Ordered mix from a company that charges by the 1/4 yard. Cost me $550 and did it myself in a day total (prepped the day before and poured the next day) I wet cured it for 3 weeks and when I drilled my baseplate in, it was by far the hardest concrete I've ever drilled through.

I use the " 50 50 broom " as well. Best broom IMO for most jobs. Leaves great lines. I'll use the 100 % plastic broom on certain jobs though too.

Great to watch you work Tyler. Like father like son in so many ways. Top notch. Thanks for sharing.

Work of art right there!

Dude! Perfectionism! Nice work!

Great job Tyler, good work 👍

Awesome job. You do amazing work.

ODELL always showing us the good stuff; much love from Canada

looks very nicely done

Planning to build a 16x24 shed this summer. Will bookmark this video for sure

This is a work of art! Beautiful!

been watching you for years, I think your a Concrete Legend mate thanks for the well explained steps mate. I'm now actually doing concreting Dave 😎

so relaxing and satisfying to watch!

From all the concrete KZfaq peeps I watch, I like the 50/50 horse 🐴 broom best. I’ve noticed it gives it a smoother finish, and still maintains a matte, satin reflection on the concrete while still providing traction. Other guys, with different brooms it seems too coarse texture with deeper lines which looks lower quality

Nice job!! Awesome!

Great job Tyler!

You guys inspired me to do multiple pads in my backyard and a retaining wall planter in the corner! Thanks for all of the detailed videos. In some of my first slabs, there are some low spots where water pools… is there anyway to fix it?

A very professional looking slab. You should be proud

Beautiful job!

Best lookin slab I ever saw

Another great video, Tyler! Keep Going!

Can you give us an idea how much would that cost? Parts and labor. Thanks! Great work!

You made that look easy. Cool video, thanks

wow i do admire your efforts put on making this conc slab. you are making the master piece of the slab haha amazing. i could not imagine if you hired someone to do this work and granted amazing amounts of dollars

Looks great!

Lovely job

David O, Excellent result. You make this look so easy! PS. very good video presentation, too!

Nice Job!! 👍

Awesome video! Thanks for the detail in it! Gday from Australia

This guy works fast! 😳

another professional job

You do amazing work. Wish you were in my neighborhood.

Tyler, you made this work of art look so easy. You nicely compressed 12 hours into 12 minutes for this video. I have never worked with concrete, but I want to make my own pad for mounting two 300 gallon fuel tanks. To be honest, it scares the bejeebers out of me. I feel like its a race against the clock so you better prepared and know what you're doing or you'll end up with two cubic yards of boat anchor. What are your thoughts on dry pouring? And, can you come to my house and do this pad for me? 😂😂😂

Awesome job dude!

Excelente y muy hermoso trabajo felicidades 👌👌

Great Job!!

Looks good.👏🏻👏🏻👏🏻

Great work. Thanks for sharing.

Good morning from Auckland, New Zealand. 🙂🙂🙂

Great Work Bud 👍👍

Great job.

Nice job 👍

Nice lil slab

Well done 💪👍

Nice work brother.👍🏻🇺🇸🇺🇸🇺🇸

Nicely done. New boss!

Nice tidy job ,,, Northern Ireland

Craftsman for sure !

Great work! what kind of concrete machine pump did you all use for your project ?

What a great job 👏 keep up the good work. My wife tells me I shop do this in are backyard. Seems to much work for me to do by myself.

Beautiful

Great job! Thank you.

Very nice, How do you clean the under edges of pour once you take the frame off?

Awesome 👍

Great how to

Great video. Thanks

Nicely done

Could have done it solo, but you had your boy Lolo 😆

I'm appreciating your work from rural Uruguay in South America. I'm amazed at the quality and attention to detail of your work. Just here also trying to learn from you, as I plan to make myself a shop out here in the middle of nowhere, fighting against third world problems, like not being able to get a cement truck here, or having access to any of those pre-mixed concretes that you have north of the equator... just sand, crushed rock, portland cement and my hands and back 😂🥲

Nicely done ✔️

Great videos, much appreciated. I notice that you don’t always use gravel and seldom vapor barriers. Can you tell us when they are needed and when they are not?

Hi Odell, Would you recommend using a bull float for small shed slab 2.7m x 1.5m which is approx 8.8ft x 5ft. I have a screeder, a small hand mag trowel and a steel finishing trowel. Wondering if i need to hire a bull float or can I get away with tools I have. Thanks for your help. Channel is great by the way.

Curious what you thought about a cement mixer called the mud mixer? It mixes cement continuously instead of in batches. Kind of expensive, but for a one man job it seems cool. Trying to decide if I should invest.

Sweet 👍

Who needs crosstraining BS when you got concrete work! I stayed for the vid 'cause you went to town on those 8-inch roots!

Can you do a cost break down for this job ? I am looking at having a 13’ x 15’ concrete slab poured and would like to have a price point. Great job as always.

Very cool

Amazing great job. BTW what about curing after casting?

Nice!

I was wondering about why are you cutting a groove on the edges? Why are you cutting a joint at the middle of the slab?

Good job

Did you do a fall from back to front and then cut a line across it ? Would a line not have worked better from back to front also - will water not pool now in that joint ?

Would be nice to see it with the shed on it

Looking to do my own concrete base for a SIPS panel garden room. I noticed that you didnt use MOT1 sub base, do you think it's not needed?

Perfect...do you ever compact the subgrade and put in gravel?

Nice 👍

Beautiful job, body!

Looks Great! Do you ever use crushed stone and tamper it level before a concrete pour?

What does the broom do for the concrete slab? Is it just a texture/cosmetic finish or is it doing something else?

A PROFESSIONAL CAME TO MY PREVIOUS HOUSE TO DO A BIG SLAB IN THE BACKYARD, HE ASKED ME HOW I WANTED THE STRESS JOINTS MADE, CONTROL JOINTS, I DIDN'T KNOW ANYTHING ABOUT IT, HE RECOMMENDED THE COMPLETE CUT, I SAID OK, A WEEK LATER I HAD WEED COMING OUT OF EACH LARGE SQUARE IN ALL DIRECTIONS, HE HAD CUT THE CONTROL JOINTS WHEN IT WAS ALMOST DRIED, WHICH LED TO CHIPS EVERYWHERE IN THE STRESS CUTS. I PAID THE GUY AND I LEARNED A VALUABLE LESSON ON CONCRETE. I COULD HAVE BEEN A JERK AND NOT PAID HIM, BUT IT'S A LESSON I LEARNED.

They call you the Jay-Z of the concrete game?

와우~~~ 깔끔하네요.

Horsehair all day 💪🏾 good work