I totally agree with you that all the colors don’t coat the same. Just need time and experience to figure it out. Tight Lines Eric
@ericmasseyjigco7 ай бұрын
They should but they don’t 🤔
@lostviking5407 ай бұрын
Another great informative video! Keep em coming
@bryanmasters54237 ай бұрын
Awesome video Eric! Thanks for all the tips and info. Appreciate it. Thanks for taking the time to make the videos!
@jeffduncan29427 ай бұрын
Man your blended paints are 🔥
@ericmasseyjigco7 ай бұрын
Thank ya Jeff
@slammingjack22427 ай бұрын
That help me out alot! Thank you.
@robertchadwick15527 ай бұрын
Excellent video Eric. Do you always use white as a base coat even when you want to make other solid colors? Thanks for showing how you get multiple colors on the head with one heating. Do you ever get paint in the jig eyes after hanging and baking them in the oven? I need to give the torch a try. That was so quick & you didn't even have to rotate the jig when heating it. Well done.
@ericmasseyjigco7 ай бұрын
You can change base coat colors sometimes yes there’s some paint in the eyes comes out very easily
@traviswilliams52017 ай бұрын
Great video thanks for your help I’m loving s as lol the good teaching I’d like to get the heads already poured where is a good place to get those from
@ericmasseyjigco7 ай бұрын
Jason Brummell on Facebook
@mikewirt90717 ай бұрын
Love this video!!!
@ericmasseyjigco7 ай бұрын
Thank you
@rickwiens97 ай бұрын
Thanks!
@ericmasseyjigco7 ай бұрын
Thank you You don’t know what that means …… thank you sir
@jamesphillips22167 ай бұрын
Fantastic informative video on painting jigs!! Where did you get your unpainted hatchet head jigs? Thanks Eric for sharing the jig painting video, it was very helpful and appreciated!!
@ericmasseyjigco7 ай бұрын
Jay Terry on Facebook
@richardkunz90047 ай бұрын
Does he have a website? I don’t have Facebook
@rickwiens97 ай бұрын
Thanks Eric!
@Paul-ke5lu7 ай бұрын
Where do you buy your jig heads from? I dont believe Jason sells the wedge heads. Also when you tie what brand of vise do you use? Great videos!
@ericmasseyjigco7 ай бұрын
Wedge heads came from Jay Terry on Facebook and I use peak rotary vice
@mdbassin62677 ай бұрын
link? @@ericmasseyjigco
@lostviking5407 ай бұрын
Do you bake/cure white base coat before dipping another color??
@ericmasseyjigco7 ай бұрын
Nope cure when all is done
@markgraham88546 ай бұрын
Good video and very informative. I really like the tip to keep the eyes clear of paint by using the hemostats. I have been baking mine at 400-420, do you think that’s too hot?
@martyure3 ай бұрын
350 for 20 minutes is all you need.
@ericmasseyjigco3 ай бұрын
Yea little too hot risk melting lead but if it’s working don’t fix it
@johndurfee59254 ай бұрын
Eric, Is the air tumbler required. I have been just dipping the jigs in one of 3 colors. White, black, or silver. Than i sprinkle with paint brushes
@dennissampson75025 ай бұрын
Do you store the cups with powder in them with a cover on the bottom as well as the top?
@ericmasseyjigco5 ай бұрын
Yes I do
@IntuitiveUniversity7 ай бұрын
Shouldn't you have ventilation?
@axeman333337 ай бұрын
No
@draggintailzfishing82822 күн бұрын
The problem im having with pro tec is mine is starting to clump up and is very hard to keep in powder form? do you have any sugestions for this
@ericmasseyjigco22 күн бұрын
I’ve never had mine clump and stay that way sometimes I use fluid bed if that don’t get it back it might be bad
@brianbochow7 ай бұрын
G'day from Australia mate I like your painting video..I am surprised how you cure your heads hanging upside down. Don't you have problems with paint dripping and causing little noses on ya heads? I use heat magnets glued to a bit of steel angle bar that way i can stand my jigs head up...The magnets will take heat up to 200°celsius before corrupting...I know because i have corrupted them before. I now run at 175°celsius for ten mins..I dont know what that is in your Fahrenheit. If i was using automotive paints which i used to do for 15 yrs whereby i would paint a epoxy on the lead first to make my paint stick on the first coat which was usually white colour. That would make the auto colours pop out with 2 part epoxy clear being the finishing coats. However i have noticed since powder painting i do not need to follow the old routine of preparing my heads as powder sticks well when heated and the paint pops really well without a white undercoat. Anyway i have enjoyed your presentation and as usual your a gold mine of information...Keep up the great work Eric. Best Regards B.J.sCustom Baits Australia.
@user-lq6iq2xd9n7 ай бұрын
Copy paper works better than coffee filters.
@traviswilliams52017 ай бұрын
Also, had a question do you have to build your own gadget to fluff your paint or is that something you can buy from a retailer?
@ericmasseyjigco7 ай бұрын
You can buy them plenty of videos on how to build them
@matthewdye25193 ай бұрын
Can this work on steel spoons and how durable is the paint
@josephauld65656 ай бұрын
What's the best strength of thread? Mine keeps breaking with just a little pressure.
Do think it’s necessary to heat treat powder painted heads anymore if use uv resin on them after tying?
@ericmasseyjigco7 ай бұрын
Most I don’t unless the paint needs to blend more
@ethanchurchill29466 ай бұрын
What are you using for a filter on your PVC powder cups? The best thing I found for consistency and air distribution is the paper from a small brown paper bag.
@kennyballew8047 ай бұрын
What is Jason's ebay store name?
@ericmasseyjigco7 ай бұрын
Jason’s Tackle Tell him I sent you please
@mikewirt90717 ай бұрын
When you were filling a big order or tying for inventory do you just tie one at a time or set up two or more vises?
@ericmasseyjigco7 ай бұрын
One at a time
@benitogarcia63815 ай бұрын
Im having the problem when I take them out of the oven they have horns on them where the paint dripped thank you looking for a solution
@SecondFloorOutdoors-gj8dt4 ай бұрын
Have had this issue too. #1, don't heat them as much, then you won't get as thick of a coat, less likely to drip. #2, make or buy a clamp rack to hold them upright instead of hanging by the hook. That way if the paint does run, it'll be down the hook where you can just break it off or tie over it. And some colors just run more. Chartreuse is a very runny color for me.
@bradz43636 ай бұрын
How do you prep your jigs before coating?
@feelmeup96967 ай бұрын
Do mold your own pill head Where can I get a 1/32 pill head mold
@melanietiedeman67747 ай бұрын
Where did you get the aerator set up?
@ericmasseyjigco7 ай бұрын
Tjs tackle I think I’ve had it for quite awhile
@richardkunz90047 ай бұрын
Where did you find your torch with the ignition/ igniter on it?
@ericmasseyjigco7 ай бұрын
Harbor freight
@richardkunz90047 ай бұрын
Thanks 😊
@mikewirt90717 ай бұрын
Thanks! I’m much faster one at a time than two or more