How To Power Your Ham Radio Station, Power Supplies, Batteries, Mobile

Рет қаралды 59,701

2 жыл бұрын

An important first step in ham radio is figuring out how you want to power your radio station. Reagrdless if it being at home or in the field, you need a good source of power to make the most of your radio operating time.
Links to power equipment mentioned in this video can be found on Amazon:
www.amazon.com/shop/hamradioc...
As an Amazon Associate I earn from qualifying purchases.
Battery calculator: www.4sqrp.com/Battery_Capacity...
GPD Pocket 2 Review: • Is The GPD Pocket 2 La...
Want the best HT antenna? Signal Stuff Signal Stick signalstuff.com/?ref=622 (This is an affliate link)
Support Ham Radio Crash Course Content
Patreon - / hoshnasi (includes monthly newsletter, stickers and Patron perks)
KZfaq - / hamradiocrashcourse (includes early access to videos, membership YT badge and custom emojis)
Shop HamTactical: www.hamtactical.com
Shop Our Affiliates: hamradiocrashcourse.com/affili...
Current Shack Config (includes affiliate links)
ICOM 7300: amzn.to/2PKBpmZ
SteppIR 3E Yagi: consumer.steppir.com/shop/hor...
ICOM 2730a: amzn.to/2JqrASg
MFJ-4230DMP: mfjenterprises.com/products/m...
Connect with Ham Radio Crash Course
Website...................► hamradiocrashcourse.com
KZfaq..................► / hamradiocrashcourse
Twitch......................► / hamradiocrashcourse
Podcast...................► hamradiocrashcourse.podbean.com/
Discord....................► / discord
Facebook................► goo.gl/cv5rEQ
Twitter......................► / hoshnasi
Instagram.................► / hoshnasi
Physical Mail.............►Josh Nass P.O Box 5101 Cerritos, CA 90703-5101
Music by Sonic D:
Soundcloud.com/sncd
Twitter.com/sncd
Facebook.com/djsonicd
#HRCC #hamradio #amateurradio

Пікірлер: 157

@bobbruch6715 2 жыл бұрын

It is VERY IMPORTANT to place the fuse as close as possible to the power source, especially in mobile installations. One of it's primary purposes, except to protect the radio, is to prevent a short circuit of the power lead from causing a FIRE, especially where the wiring comes through the firewall into the vehicle, which brings up another topic, the wires should be protected where they pass through the firewall with a rubber grommet or protection sleeve.

@davidmackenzie5332 Жыл бұрын

Josh, you're a national treasure, my man. Eleven months later, and this video is still tops.

@HamRadioCrashCourse Жыл бұрын

Thanks David, I appreciate that!

@Sonicgott Ай бұрын

Josh, you’re a treasure trove of information, so, thank you!

@HamRadioCrashCourse Ай бұрын

My pleasure!

@SoulStarLA Ай бұрын

This is a really helpful video Josh, even two years later. The power aspect is one of the most important parts of SHTF radio gear. Many videos go into ham emergency kits, but fail to really cover the battery solutions that could work, especially when there is no power available at all. Glad that LiFePO4 batteries have come down in price since the video was made. Good job!

@kermitfrog1897 2 жыл бұрын

For automotive installation of HF 100 watt radios---use 12 gauge or even better 10 gauge wire and run it directly to the battery with fuse or breaker in series. Add an appropriately sized relay and switch the relay from key switch if you want the radio to power down with key.

@Blake-jl8lh 2 жыл бұрын

I love this video, people talk about their equipment all the time but I dont see people talking about power supplies much at all

@HamRadioCrashCourse 2 жыл бұрын

Thank you! Give it the 👍

@jeff-73 2 жыл бұрын

Excellent vid. Thanks so much!!! Also I just checked out your amazon store. Love how you have it laid out… makes it easy to understand what we need.

@HamRadioCrashCourse 2 жыл бұрын

Thank you!

@mikemiles3068 2 жыл бұрын

Very good video Josh❗️it’s definitely an advantage to have several different options to power your radios. 73. KV5P

@Kodo-Nashi 2 жыл бұрын

Focus you Duck! Great video man, thanks for the upload.

@Cephalon_Shade 2 жыл бұрын

Wanted to say thank you for this video. It helped me figure out what I needed to power the SAR radio trailer I get to build out. (The team I am on is a small one in WV and I'm doing their tech/radio stuff for them.)

@HamRadioCrashCourse 2 жыл бұрын

Awesome! I’m glad it helped!

@Paddy_Roche 2 жыл бұрын

Great video Josh, this topic had me baffled for a long time and it is so important too. Wrong amperage/voltage etc… can be very costly to us Hams. Just when I think I’d worked it all out you make a great video explaining it, lol. At least you have confirmed I had grasped the subject correctly. All new Hams should see this Video, 5 🌟 73 de 2E0TWD

@HamRadioCrashCourse 2 жыл бұрын

Thank you!

@larrywiley1804 2 жыл бұрын

Very helpful. Thanks

@jeffjohansen4945 6 ай бұрын

Great video josh thank you

@andrewgrundel2199 2 жыл бұрын

Great video!

@lpark8 2 жыл бұрын

Great video thank you

@wild-radio7373 2 жыл бұрын

Team Replay for the win!♡♡♡ appreciate your work hamFam :)

@christophersmith1155 2 жыл бұрын

THANK YOU FOR THE CALCULATOR

@charlesdavis9937 2 жыл бұрын

Getting ready to build a portable shtf communications box.

@KK6USYHamRadioAdventures 2 жыл бұрын

Nice video Josh.

@nerdinium 2 жыл бұрын

Yes, LiFePO4 is more expensive up front, but the average lifespan of a lead acid battery is 600-800 cycles (assuming you don't run it down below 50% which will kill it). A lifepo4 battery is good for 3000 to 8000 cycles, so it has 10 times the lifespan. If you baby it and only charge from 20% to 80% it will last for decades. Lifepo4 is cheaper in the long run, and safer.

@HamRadioCrashCourse 2 жыл бұрын

Good points! 👍👍

@harry356 2 жыл бұрын

How many times will you actually drain the battery so much would also be a consideration.

@skankhunt9078 Жыл бұрын

Why not lipo? They're much cheaper than lifepo

@757SheepdogPreparedness 2 жыл бұрын

Thanks for all the info. You cover almost all my questions!

@soundwaves1545 2 жыл бұрын

Love you charge with solar lots of testing done

@Brighamdoc 2 жыл бұрын

I've used so many different external portable batteries and my favorite are definitely Bioenno batteries for the power/dollar. I'd love to hear what charge controllers you think are good - also maybe different solar options. Maybe you already have info on that.... I'll have to look

@davidsradioroom9678 2 жыл бұрын

You have done a great job covering power for our radios.

@EssexCountyPhoto 2 жыл бұрын

"Oh Great Ham One..." ( ...I'm sorry... I HAD to... 😉 ) Greetings from the UK! 🇬🇧🤝🏻🇺🇲 Thank you for your electrifying wisdom... I wish I'd known all your tips and tricks before realising I couldn't just plug my IC-705 directly into a wall socket... 😱🤣 But thanks to the lovely gentleman at Waters & Stanton in Portsmouth, England, I'm now using a very small Pro Audio KX-33 adaptor (230V => 14V) designed for an Elecraft KX3. Works a treat, job done!!! Stay safe, best regards, 73 de 2E0HJN

@Rusted_Link 2 жыл бұрын

I recently purchased an STP 1330 it's got really good numbers on it and I love that it's got the cigarette adapter right there for other shop needs. Anyone have any thoughts about this unit? It's only 30 amp but it is a switching power supply it's regulated and it specifically made for communication equipment. And yes the 200 amp hours of batteries got to be a bit heavy.

@rbmwiv 4 ай бұрын

Makes me feel fortunate that my vehicles cig lighter is straight off the battery using using around 8 gauge wires straight from the battery and has a 30amp fuse. Never had any issues. The most power i run mobile is only 50 watts so my setup serves me well.

@JohnStruemph 2 жыл бұрын

Nicely done Josh! 73 de K1JHS

@the1spyderryder 2 жыл бұрын

Most all switching power supplys produce noise but the high speed switchers are easier to filter and the higher frequency the smaller the caps needed to filter them.

@donaldhiles_k9sgz428 2 жыл бұрын

Thanks Josh, great information.

@wp4rkf 2 жыл бұрын

I run my base with one of those switching power supply @11:42. 😁

@rbmwiv 4 ай бұрын

I lucked up with a switching power supply it is very quiet. I put it on a scope and it has a really clean power output. It was a cheapo so was a gamble.

@paulhastings3109 2 жыл бұрын

Thank you

@HamRadioCrashCourse 2 жыл бұрын

Sure thing!

@gpbarth 2 жыл бұрын

It is all over the Web about converting those ubiquitous computer power supplies over to bench supplies, and it seems that everyone has one sitting in their basement. And it alsoseems that a lot of them have 12VDC @ 40+amps, and if you add a buck boost converter, you have a PS that gives you 5VDC for USB and up to 35VDC of adjustable, plus a fixed 12VDC for your radios. And it is not expensive nor hard to do. - N4YVN

@the1spyderryder 2 жыл бұрын

Use ferite filters in the DC line to keep noise off the power going to your radio.

@DonDegidio 2 жыл бұрын

Hi Josh, Excellent video with great info. I've been using a Samlex SEC-1235 power supply for my FT450, Amertron RCS-8 remote coax switch, and West Mountain Radio ClearSpeech CLRdsp for three years with a hiccup. You and the family stay safe. 73 WJ3U

@alvarogaitan2529 2 жыл бұрын

thanks Mike fantastic video 73 from kb2uew

@HamRadioCrashCourse 2 жыл бұрын

I’m Josh. 😵

@madmax2069 2 жыл бұрын

Some of the upgrade batteries for the Baofeng radios have a DC input jack on the battery themselves (as well as the normal charge pads to use the stock Baofeng charger). There's also the battery packs that take AA batteries, as well as the one that contains no batteries but allow you to plug into the DC port in the car. There's also the far more expensive Battleborn lithium batteries if you're using solar in the shack to power equipment.

@nateitkin8279 3 ай бұрын

Thanks Josh. Have you found a good way to charge your Bioenno using the vehicle? It would be handy to charge one LiFePO4 battery while using another, but most chargers want 120VAC. Seems like overkill to use an inverter.

@skankhunt9078 Жыл бұрын

Hi. Can you please advise for a battery for the anytone 578 for a manpack? I was looking into 12v lithium polymer. Would those work? I'm really new. Thanks

@charlesisbell4340 2 жыл бұрын

OK, I have a question about vehicle power. The typical car/truck, the battery isn't far away from the radio. However, in a semi truck there's a lot more real estate between the battery and ground to the radio. The batteries are usually mounted in one of three locations; step box under the door, battery box under the sleeper (not very common anymore) or in a battery box mounted between the frame rails usually a foot or two behind the back wall of the sleeper. Would the extra distance of power wire effect the radio? Now most trucks do have red/black screw poles (12v) for CB somehere on the dash or overhead CB din and works just fine but I'm not to sure if it will be sufficient for a Amateur radio. Also I am finding a bit of conflicting information on Amateur and CB antenna mounting and spacing. I would like to keep the CB up and running at all times for traffic information but don't want the HAM interfering and bleeding over into the CB. Any ideas?

@timbookedtwo2375 2 жыл бұрын

Good that you pointed out HF radios need about 21A to put out 100W. I bought a 12v LiFePO4 battery for portable work. I transmitted with 50w or less, and the battery lasted a very long time, longer after I attached a solar panel and charge controller. I now have a kind of semi-permanent shack (literally, a shack in an olive grove) and power my devices 100% with batteries and PV. I would like to be able to transmit with a full 100w, but the LiFePO4 battery says, " no can do." That has to do with the battery chemistry and construction. So now I have go buy a more suitable battery that will deliver constant 20-25A, which means in general a bigger, more expensive battery. My XYL is not amused. So keep the constant output current in mind when you buy a battery. If you want 100w RF output, you will be dissatified with a battery like mine. 73!

@jurgen2596 2 жыл бұрын

Hello Tim, my batteries from "Eremit" create 100 W on the TRX. With 18 Ah, 50 Ah and more. With built-in BMS. Arthur von Funkwelle's KZfaq channel is also testing this on the FTDX 101. That works with it, 73 Jürgen DK4BU

@jurgen2596 2 жыл бұрын

Eremit LiFePO4

@GarettMcDermid 7 ай бұрын

Any all in one power stations - jackery, goal zero, etc, that would work for ham radio? I know they're based off watts and not amps, but looking to build one out of a lifepo battery costs more than an all in one. Bioeno makes a box but doesn't have the solar charge controlled built in.

@rdmclark 2 жыл бұрын

One of the best upgrades I did for my car battery. Get a automotive AGM battery, I got mine from autozone there Platinum series. Thy take deap discharge better and the on time is longer when the motor is off. The voltage sag is less when starting the motor. The one in my van is going on 7 years and still strong. Just replaced the battery in my other vehicle the one.

@josephdurnal 2 жыл бұрын

The Icom IC-7851, Kenwood TS990S, & Yaesu FTdx-101MP have the power supplies built in.

@Dreamlgider 2 жыл бұрын

No, the ftdx101mp requires an external psu.

@josephdurnal 2 жыл бұрын

@@Dreamlgider ah, I don't have one in front of me, but it probably works like the FT-2000D it is external, but it ships with the required power supply. The yaesu specs say it requires mains AC voltage.

@Dreamlgider 2 жыл бұрын

@@josephdurnal yup, the 101mp is 200w and comes with a dedicated speaker/psu. the ftdx101d is 100w is "12v" (13.8v) 73 de oy1r

@steven33068 2 жыл бұрын

hello, I'm looking for a way to store my radio presets on my boat when I cut off power to the helm. Do yo know if I can do this with a similar battery? NOONE has a video out there showing this process. I think it would be very beneficial. I don't think the radio needs much juice to "remember' those presets. Thoughts? thank you so much.

@Rusted_Link 2 жыл бұрын

Best noise free power supply, 200 amp hours of battery that is not charging while you're using your radio. Good luck hauling that around with you.

@SteveKN4POP 2 жыл бұрын

I've been a ham for quite a while and I wish this info was available when I first started. My reasoning for learning these comm options was SHTF. Now my question to you is, when SHTF is there a counter measure to help prevent or protect against government jamming frequencies? I see it being, NO. There is nothing we can do. And pray this never happens. But we never know when this may be the case.

@HamRadioCrashCourse 2 жыл бұрын

Be frequency agile. Hop bands as needed.

@xjohn1970 2 жыл бұрын

@Ham Radio Crash Course. I Have a 20 Amp 13.8VDC Linear Regulated Power Supply highly stable, high quality. My question is on the unit it says 20 AMPS Constant / 22 Amps Surge. What is the 22 AMP Surge for? And What does it do? Thank You. Love all the info from this channel.

@HamRadioCrashCourse 2 жыл бұрын

Surge implies short term draw. Not continuous. It would depend on the device you run on the supply of that even matters for you

@snowdiddley4634 2 жыл бұрын

Great video Josh. PS luv the shirt 👍

@alexgunawan98 Жыл бұрын

can use power bank ? i was thinking carrying around.

@mikemiles3068 2 жыл бұрын

Good video Josh👍❗️ 73. KV5P

@HamRadioCrashCourse 2 жыл бұрын

Thank you!!

@1polonium210 2 жыл бұрын

For remote work, I like Bioenno and Jackery.

@HamRadioCrashCourse 2 жыл бұрын

Me too!

@NathanMazanec 2 жыл бұрын

Oh Great Ham One! We thank you for your insight into the power! Just seems the auto focus keeps getting you though... But how crisp and beautiful the image is!

@HamRadioCrashCourse 2 жыл бұрын

I had a “product showcase” feature on just testing it out. I’m too animated with my hands for it I think.

@n2rj 2 жыл бұрын

Autofocus seems to work well outdoors but I’ve given up on using it indoors.

@HamRadioCrashCourse 2 жыл бұрын

@@n2rj Its that "product focus" feature on the zv-e10. Wanted to try it :D

@n2rj 2 жыл бұрын

@@HamRadioCrashCourse yes that’s the product showcase feature. In general it relies upon autofocus which doesn’t work well indoors here so I turned it off. It’s not a bad concept but I think it needs improvement. I just set manual focus now.

@BlackHamRadioUniversity Жыл бұрын

There are so many precautions to take and think about when it comes to connecting your mobile radio directly to your car battery. So to avoid that I was just thinking........why not just purchase a separate stand-alone battery? With a stand-alone battery you don't have to worry about the radio effecting other components to the car because the separate stand-alone battery will only be dedicated to the mobile radio. It would cost me almost nothing to build my own compartment in the trunk of my car for a stand-alone battery. What do you think of that?

@taylorlavata2837 Ай бұрын

I am a 27 year old women am i the only young women my age that is licensed and loves ham radio ham radio is basically my life i really live for this hobby

@HamRadioCrashCourse Ай бұрын

Glad you’re out there on the air!

@rcaetano223 2 жыл бұрын

How RF noisy is the toolKitRC power supply?

@AD6DMDennis 2 жыл бұрын

Is your pointing assistance tool an Abbree??

@HamRadioCrashCourse 2 жыл бұрын

Yeah. The sharp one.

@AD6DMDennis 2 жыл бұрын

@@HamRadioCrashCourse Now I got a ToolkitRC P200 in the shopping cart.

@madmax2069 2 жыл бұрын

@@HamRadioCrashCourse it's sharp and to the point......

@Michael-fs8km 2 жыл бұрын

@HamRadioCrashCourse, @Josh... Being a noob to Ham radio I caught wind of something the other day that I was hoping you could clear up for myself and others who may hear the same thing at some point...... Can a person use a CB 'Linear Amp' for Ham radio?..... I have tried to look this question up here on the web, but I'm just not having any luck. Personally I kind of feel the person who told me was being a douchebag and hoping I would fry something so they could be entertained at my expense. I am currently studying to get my license and hope to take my test soon. Thanks my friend, love your content!! Keep up the good work and hope to hear back from you!

@HamRadioCrashCourse 2 жыл бұрын

You might be able to use a CB amp in 12 or the 10 meter band. You might need to adjust the amp.

@vmenezvc Жыл бұрын

How do I regulate/control the battery output to the radio to have a constant Voltage? I see small variations in my Voltage while operating with batteries and I don't like it, not sure if it can cause problems in a long term. Tks for the video!

@HamRadioCrashCourse Жыл бұрын

Most newer radios are fairly tolerant of battery dips. They make devices that supply a consistent voltage, look into devi

@raymondmartin6737 2 жыл бұрын

Yes, a while ago, I had a local two way radio dealer, install a cable from the battery 🔋 to the passenger compartment with the appropriate connector to match my mobile radio, which will not perform well on below the required voltage, such as a portable battery 🔋. 73 de W2CH, Ray

@markgamble7699 2 жыл бұрын

Is it safe to have a handy talkie near air bags??? Read it wasn’t so wanted more thoughts on it… Appreciate any understanding on it…

@HamRadioCrashCourse 2 жыл бұрын

Likely not a good idea in front of airbags. Like between humans and the airbags. 😳

@markgamble7699 2 жыл бұрын

@@HamRadioCrashCourse ok appreciate that… Wife curious, y’all know us men got to ask, lol

@barneymerrill3188 Жыл бұрын

Any link for the PowerFilm Solar panel...couldn't find it in your list! 73

@HamRadioCrashCourse Жыл бұрын

Try Gigaparts. They sell them.

@craigscherer563 2 жыл бұрын

You can figure out how much your cigar lighter delivers is to simply find the fuse and check its value.

@albing1397 2 жыл бұрын

The connector is rated at 10 A max anyway. Fine for that 2M mobile.

@SuperJoeReb Жыл бұрын

Where's the link?

@jjsemperfi 2 жыл бұрын

I run my equipment off of the energy produced by my 15 month old. Tough to convert and sometimes has spotty output. 2/10 would not recommend.

@daleadmire1451 2 жыл бұрын

Wow, thank you for the nice gut chuckle, I needed that!

@forgetyourlife 2 жыл бұрын

Most of the energy produced by 15 month olds is wasted coming out the top and bottom.

@harry356 2 жыл бұрын

In the movie the matrix they have it all figured out, maybe watch that for inspiration.

@cathrynm 2 жыл бұрын

That IC705 is pretty cute. I'm just not leaving the house due to pandemic, so can't really rationalize it.

@burnzy3210 2 жыл бұрын

the baofeng i have charges with usb, so i can use a battery bank, solar or even a dynamo i bought

@HamRadioCrashCourse 2 жыл бұрын

Sure. But likely not while also running the radio. Etc.

@burnzy3210 2 жыл бұрын

@@HamRadioCrashCourse indeed but that's what it's internal battery is for ;)

@harry356 2 жыл бұрын

I am looking for such a cheap, readily available and flexible solution. I like that it uses standard components (there will be plenty empty powerbanks available in a grid down situation). Charge them with your solar panel (portable or from the grid connected panels with a emergency off grid solar inverter) and you can hand out full powerbanks and power a lot of radio's.

@kylethedarkness Жыл бұрын

What is a QRP radio?

@kishor_VU2MZT 2 жыл бұрын

HIIII I M NEW BEE IN HAM , I HAVE A QUESTION , IN POWER GRID FAILURE , CAN I USE MY HOME INVERTER SQAURE WAVE BATTERY BACKUP TO POWER LINEAR POWER SUPLY (30 AMP 13.8 V ) WHICH GIVING POWER TO IC7300

@HamRadioCrashCourse 2 жыл бұрын

Yes.

@echofoxtrotwhiskey1595 Жыл бұрын

How is a 12v battery increasing your power with the 705 when it’s rated for 13.8v ?

@HamRadioCrashCourse Жыл бұрын

The ht battery it runs on is lower voltage, so less output power. If you give it 13.8 volts, it’ll put out ten watts.

@harry356 2 жыл бұрын

This seem to be all quite expensive and complex gear. Do you have simple solution for simple hand held radio's. For example, solar charging a simple usb power bank, and use that at night to charge your recharge the hand held radio's? I do not plan on continuously transmitting with 100's of watts in a grid down situation, just with local living family members / friends. (Even The light saver max is already 400$)

@HamRadioCrashCourse 2 жыл бұрын

Sure the usb dc cables I mentioned will do that. Just find the for your radio.

@harry356 2 жыл бұрын

@@HamRadioCrashCourse I somehow missed that part - I found the right cable for my plan, thanks!

@reinerhohn472 2 жыл бұрын

Ohhhh, i need a power Suply or batterie for my radio? First time here about it..........

@HamRadioCrashCourse 2 жыл бұрын

It depends on the radio. What are you running?

@Siskiyous6 2 жыл бұрын

How is that DMX-40 working out for you?

@HamRadioCrashCourse 2 жыл бұрын

A video is coming soon!

@Stealthmodeactivated-h8w 2 жыл бұрын

Shame no powerfilm or bioenno product is available outside the USA

@dunavskakarakuda Жыл бұрын

Im intending of getting the Anytone UHF/ VHF radio. It says it is DC12V- DC13.8V. What does it actually mean? Can I power it with just 12V ?

@HamRadioCrashCourse Жыл бұрын

Yes. It’s asking for voltage between 12-13.8. How many amps does it also call for?

@dunavskakarakuda Жыл бұрын

@@HamRadioCrashCourse I couldnt find what is its maximum draw, but on their site they say that the recommended PSU current is 10A.

@HamRadioCrashCourse Жыл бұрын

You would need a power supply or battery that can handle 10 amps at 12-13.8v

@dunavskakarakuda Жыл бұрын

@@HamRadioCrashCourse Thanks, Josh

@remingtonkevin65 2 жыл бұрын

My goodness man! How many radios do you have? What is your electric bill every month?!

@HamRadioCrashCourse 2 жыл бұрын

Electric bill = yes

@the1spyderryder 2 жыл бұрын

If you are running power from your mobile battery and place a properly sized fuse in line at the battery connection you will never have a burned wire, because, a fuse is there to protect the wire, not your appliance...... radio or equipment!

@aramb 2 жыл бұрын

A suggestion: you sometimes say "amperage" and other times say "current" and that can be confusing to a beginner. "current" is really the correct term.

@HamRadioCrashCourse 2 жыл бұрын

This is a good point and I’ll try to remember the correct terms. 👍

@N2YTA 2 жыл бұрын

Also, sometimes people say "wattage" instead of power.

@cconstab 2 жыл бұрын

Fuses do not protect the radio at all.. What they do protect is the cable itself. The fuse burns out before the cable catches fire.

@HamRadioCrashCourse 2 жыл бұрын

… which protects the radio too?

@Ploggy. 2 жыл бұрын

👍👍👍

@g2D1 Жыл бұрын

Hello everybody, I would like to get my L1 and L2 Ham license. My intention is simple, monitor for what is stirring in the weeds and in the event of an emergency be able to transmit. I have a limited budget, so I don't qualify for an enthusiast or hobbyist. What ham at home radio can I buy, so I can use the L1 and L2 online courses to get my license? -Regards, -G

@HamRadioCrashCourse Жыл бұрын

Which country are you in? I am not familiar with L1 & L2 here in the states.

@g2D1 Жыл бұрын

@@HamRadioCrashCourse Bastrop TX USA :) HamRadioPrep is how they label the Technician and Technician + General license classes. Do you know of HamRadioPrep?

@g2D1 Жыл бұрын

@@HamRadioCrashCourse I currently own a very entry level ham (BAOFENG GT-5R Dual Band Two Way Radio 144-148/420-450MHz) will this be enough to take the classes and pass the exams?

@BlackHamRadioUniversity Жыл бұрын

Instead of making these radios where a power supply is needed, why doesnt ICOM, Yaesu and Kenwood make their radios with regular plugs that can be plugged up into a regular wall socket in the home? How hard can it be to make a radio that plugs up into a wall?

@HamRadioCrashCourse Жыл бұрын

You want them to include a ac/dc power transformer in the radio body to make it heavier and more expensive? What about the people that only have 12 volt dc in their shack or off grid setup?

@BlackHamRadioUniversity Жыл бұрын

@@HamRadioCrashCourse Paying a little extra for shipping would not be more expensive than going out and buying a power supply. No where near as expensive as getting a power supply. Even the cheapest power supply for your average ham radio is about 4100.00. There is not way that shipping would be $100.00 more if they included an AC/DC power transformer in the radio. No way.

@BlackHamRadioUniversity Жыл бұрын

@@HamRadioCrashCourse As far as off the grid setup, they can still make the make radios that have the all all connections in one radio including a plug.

@HamRadioCrashCourse Жыл бұрын

Companies don’t want to make two radio models one with a different case and power supply and one without. It’s not worth the effort and costs. Further, power supplies usually power more than a radio in the shack. So that’s an issue. If the supply fails, a cheap part, do you ship the whole radio back? FYI, this was tried in the ham radio market. The customer base didn’t want it.

@RF_Burns 11 ай бұрын

I use old socks... the stinkier the better! I used to use my old lady's worn knickers, but the voltage was too high. Nasty!

@CarlosDelaoGunEngraver 22 күн бұрын

such a hassle to find the power supply from your link, you should have a direct link to item.your loosing out money, jut easier to input name of item on amazon,.just saying

@daleadmire1451 2 жыл бұрын

I thought for sure this was going to be a jackery ad, it seems they send portable power units to every KZfaqr these days.

@HamRadioCrashCourse 2 жыл бұрын

They might do that. But I bought mine and the panel. 😬💸

@gingerman5123 2 жыл бұрын

I **REALLYYYYY** wish someone would make an HT that would charge directly off of USB-A/C... cmon... Everything is made that way. I've used some USB-A to DC adapters but they are all noisy. I want a damn USB jack directly on the radio.

@norrinradd8952 2 жыл бұрын

Radioddity GS-5B has a charging port on the back of the battery that connects to USB.

@HamRadioCrashCourse 2 жыл бұрын

Yes there are batteries like this, but they don’t recommended charging it while the radio is running.

@norrinradd8952 2 жыл бұрын

@@HamRadioCrashCourse Good point, but that's what you get when you charge a 7.4v battery over a 5v USB port. Solution: have multiple batteries. Continue operating while charging off USB. Or do what the rest of us do and get an HT with a 12v charger. I was just pointing out that USB charging exists for an HT.

@slappomatthew 5 ай бұрын

Meh, you don’t buy a refrigerator that needs a power supply, ham radio companies are just cheating out

@HamRadioCrashCourse 5 ай бұрын

Not really. It’s all 12 volt systems.

@MikeG-js1jt Жыл бұрын

for some reason that is apparently beyond me, those Bioenno bastards charge far more than they need to for their gosh-darn batteries compared to almost any other brand that I've researched............. Apart from overflowing greed, what the HELL is going on with those folks from Bioenno?

@HamRadioCrashCourse Жыл бұрын

Different cells, different BMS, etc.