How to Prep and install handles on a knife so they will NEVER fail.....ever!

Рет қаралды 2,405

2 ай бұрын

Today I went over my process for prepping handles to permanently install on a knife!! Thank you for watching!
Epoxy…amzn.to/3vwdFb6
if this video helped you PLEASE consider subscribing to my patreon account for only 5$ per month! And join the Patreon group chat where I’ll answer your questions!
/ gentrycustomknives
New shirts!!! www.steadfastamerican.com/col...
Www.gentrycustomknives.com
bruntworkwear.com/discount/GE...
beaumontmetalworks.com/produc.... Code KMGTX-23GCK for 650$ off
pelicanpaste.com. Coupon code GENTRY
Ca glue.. amzn.to/3ITrD9y
Red label abrasive belts…www.amazon.com/dp/B00DH0C68O/...
New respirator I use! Works great! amzn.to/3xZymcO
Bevel jig. … amzn.to/3yz0OCI
Height gauge…amzn.to/3IEsWJa
Layout fluid…amzn.to/3J0BhZl
Belt holders!! housemade.us/products/2x72-be...
Air hose reel.. amzn.to/3QiV6hQ
Shop heater. .. amzn.to/45yxla0
Buffers!! amzn.to/48PL7rT
Air filter…amzn.to/3rR3KuN

Пікірлер: 51

@jaidedeye 2 ай бұрын

As a new knife maker. This is by far my favorite channel.

@gentrycustomknives8008 2 ай бұрын

Wow well thank you!

@jaidedeye 2 ай бұрын

@@gentrycustomknives8008 your welcome!

@RoughOnStuff 2 ай бұрын

The muk you put together for me last year has seen a lot of fun already!! Favorite most versatile blade!

@HudsonHandel 2 ай бұрын

Every time I’m stuck on something you release a video with all the info I need!

@gentrycustomknives8008 2 ай бұрын

Awesome to hear! Thank you!

@bobbygervais6185 2 ай бұрын

What ive been doing is taping up the blade where i dont want sny marks, then sandblasting the whole tang which i learned from Walter Sorrells. Works really well.

@richardbranton190 2 ай бұрын

I've been wanting to drill holes in my handles like that but I didn't know if it would mess up my liners. I guess you answered my question 👍 great video

@gentrycustomknives8008 2 ай бұрын

Thank you!

@jasonvliet-odonataknifeworks 2 ай бұрын

Hey Matt, try mineral oil for the clean up on the front of the scales. Works well and it won’t wick like lacquer thinner or acetone. It’s a Will Stelter tip…I can’t take credit for it.

@Wengelsworkshop 2 ай бұрын

Kyle Royer uses wd40. I have never tried mineral oil but wd40 works way better than acetone.

@gentrycustomknives8008 2 ай бұрын

O cool I’ll try that thank you!

@davidscadlock5569 2 ай бұрын

Great presentation!!! Thank you!!!

@gentrycustomknives8008 2 ай бұрын

Well thank you!

@lukusamongus4079 2 ай бұрын

Since you have the front of the scales finished, cut and apply a small piece of blue painter's tape (there on your workbench) to the front finished part of each scale. Then a piece of tape on each side of the knife blade so it's 1/16" in front of the scales. Then, you can epoxy and clamp. Just wipe away the epoxy so there's not too much at the joint. No messing with thinner or acetone for clean up. When epoxy is set, you can peel off the tape and use a straight razor blade to trim away the small bit of excess that's left. I've done this for years and it's much easier than trying to clean up the blade while the epoxy is liquid.

@gentrycustomknives8008 2 ай бұрын

Great idea thank you!

@breathofrhythm1552 2 ай бұрын

Whenever I drill holes for epoxy to pool into, I like to think I'm creating an epoxy dowel to help secure the parts. 🙂

@gentrycustomknives8008 2 ай бұрын

Definitely!

@timcrookham5204 2 ай бұрын

You always have the crispest grind lines

@gentrycustomknives8008 2 ай бұрын

Thank you!

@user-kk6tf2rq7s 7 күн бұрын

Hello. Thank you for all the tapes you make. Why don't you cover the blade with cling film or adhesive paper while gluing? Why don't you work with surgical gloves?

@billclancy4913 2 ай бұрын

I use a very similar process, but use Corby bolts as well, giving a better physical bond to the scales as well.

@gentrycustomknives8008 2 ай бұрын

Those are nice!!

@Robpearceknives 2 ай бұрын

Another great video Matt. I picked up on applying oil on the clean flats above the bolster area. That’s something I don’t do in glue up. I live in a very dry area and haven’t had problems, but it wouldn’t hurt. The lanyard tube is something I do differently. I do scuff all pins and will roll them through a thin area of the epoxy puddle. I plug one end of the lanyard tube with cheap modeling clay and run that end through to keep the inside clear of epoxy. I leave it a little long and cut it off after the gflex sets overnight. Thank you for the video and sharing your process.

@gentrycustomknives8008 2 ай бұрын

I think that’s a great idea! Thanks for watching!

@davidcoalkey6074 2 ай бұрын

One of the things that I do is what I'm doing those little holes on the tang side of the scales I make sure that I have holes that line up with the weight reduction pass through holes in the tang. I feel that doing so creates an internal epoxy pin. Other than that our process is almost identical. Oh, one more thing I switched from using tape to mix the epoxy on to using a paper plate. It just seems to keep things a little cleaner and faster.

@gentrycustomknives8008 2 ай бұрын

Both of those are great ideas! Thank you!

@TheScrawnyLumberjack 2 ай бұрын

You can set a depth stop on the drill press. I’ve read a space of about .01 is the ideal about for epoxy to hold.

@gentrycustomknives8008 2 ай бұрын

That’s a great idea!

@samb5.5 2 ай бұрын

Have you ever done stress tests to see if the little holes make a significant difference? Makes sense in my head just curious

@gentrycustomknives8008 2 ай бұрын

Not on the hole theory. I want to though, what do you think would be a good test for that?

@samb5.5 2 ай бұрын

@@gentrycustomknives8008 two knives with oversized scales one with the tiny holes and one with out, use the oversized scales to clamp one side and jack up the other and compare the two, bonus points for a small pressure plate that measures the force

@BadDawg444 2 ай бұрын

Awesome! Looking forward to watching this later!

@gentrycustomknives8008 2 ай бұрын

👊👊👊 well thank you and hopefully it helps

@mhager017 2 ай бұрын

Great video, Matt. I also use GFlex and it has worked well. Do you also use GFlex when you glue up your segmented scales or liners? I was thinking about just using JB Weld for liners since it's a bit cheaper and easier to mix up quick.

@gentrycustomknives8008 2 ай бұрын

I’m using starbond medium ca glue for most of my segmented scales now

@JohnnyCreighton 2 ай бұрын

Hey can you make a video about your razor sharp paper wheels ?

@gentrycustomknives8008 2 ай бұрын

I have one up if you go back a ways !

@Unclelarry766abc 2 ай бұрын

As always…learn something new. Thanks!

@gentrycustomknives8008 2 ай бұрын

Awesome thank you for watching!

@dominicdwk 2 ай бұрын

How thick is that G10?

@gentrycustomknives8008 2 ай бұрын

.60

@stephengoggins7919 Ай бұрын

How do you buy your belts for the grinder? Do you buy in bulk from Red Label?

@gentrycustomknives8008 Ай бұрын

Yes I do!

@TheBroot0999 2 ай бұрын

Have you ever used slow cure epoxy from BSI?

@gentrycustomknives8008 2 ай бұрын

I haven’t! Should I check it out?

@TheBroot0999 2 ай бұрын

@gentrycustomknives8008 I can't compare it to anything else ..I know it works well and is cost effective, but cures slowly resulting as in any slow cure a great bond.

@trainwon5699 2 ай бұрын

I also use Slow set BSI and never had any failures. When using any epoxy I have found that the proper mix ratio and stirring is important. Another great Mat thanks for sharing.

@justingoodman5600 2 ай бұрын

It’s not in your head Matt. Dimples and chamfers on the back side of scales increase the surface area to be bonded. More surface area, greater strength. As for epoxy, I agree on G-flex but recently been told that POP’s has their own and it’s identical to G-flex. I haven’t tried it yet because I still have half a bottle left but will get some when I need it.

@stephengoggins7919 2 ай бұрын

Have you ever have people order a knife, you build it, and then no pick it up?

@gentrycustomknives8008 2 ай бұрын

Yes! I normally just list them forsale though when that happens. No biggie