How to Prime a Jet Pump

Рет қаралды 667,633

Күн бұрын

Chris shows you the proper way to prime a jet pump, and lets you in on some secrets to getting the pump primed the first time.
Buy the hand primer pump here: www.rcworst.com/wade-rain-6-9...
Subscribe & “Ring the Bell”: bit.ly/2CpXSsv
Have a question or need help selecting equipment?
Live chat with us on our website: www.rcworst.com
Call our experts: 855.329.4519
Email: Customer.Service@RCWorst.com
----------------------------------------------------------------------------------------
Our Social Media
Facebook: / rcworst
Instagram: / rcworstcompany
Twitter: / rcworst
LinkedIn: / r-c--worst-&-co--inc-
----------------------------------------------------------------------------------------
We are a distributor of pumps, packaged pumping systems, on-site wastewater treatment equipment, on-site wastewater treatment systems, and custom electrical control panels for water and wastewater applications, water well supplies, drilling supplies, and water treatment equipment.

Пікірлер: 202

@muttpack26 5 жыл бұрын

Just purchased a cabin that utilizes a pump from the lake to the cabin for all plumbing. This video is exactly what i needed, as i am a total rookie at this stuff. Thank you!

@RCworstwater 5 жыл бұрын

Thanks for watching!

@LynnieLynn511 4 жыл бұрын

This is great, thank you SO much for making these videos, it's 10:30 at night and we're caring for our sick, elderly parents/in-laws and their water pump just went out. If it weren't for your video, who knows what would've happened, things go on here during the night and we need to have water, a lot of water!! Thanks again, great in emergency situations! 👍😊

@RCworstwater 4 жыл бұрын

Happy to help!

@DeaLiberatelyCreeating369 10 ай бұрын

😂

@VitorMadeira 5 жыл бұрын

Man... I've been looking for a video like this for quite some time... Thank you. Really helpful. Greetings from Portugal.

@RCworstwater 5 жыл бұрын

Glad we could help, thanks for the comment! :)

@darkflux 11 ай бұрын

you could also install a one-way check valve to ensure that water doesn't flow back out of your source line.

@LoisToYou Жыл бұрын

Really great video! I have searched and researched and this is the first time I've been satisfied with the information. Awesome job

@RCworstwater Жыл бұрын

Thanks for your comment!

@MuhammadTayyabRana 4 жыл бұрын

It was as a perfect video looking for installing my centrifugal pump. Looks to me a correct way to install the pump

@MJohnJordan 3 жыл бұрын

Thank you for this video. I have a jet pump which I needed to prime, And you video helped me understand what I needed to do. Thank you

@RCworstwater 3 жыл бұрын

Great to hear!

@mlm7598 5 жыл бұрын

Thank you for the tutorial.......it will be handy as we replace our pump.

@RCworstwater 5 жыл бұрын

Thanks for watching!

@LaszloMag 4 жыл бұрын

Super informative videos. We recently bought a house with an irrigation watering system. Two hours ago I didn't even know what a jet pump was, but now I'm feeling confident to at least start trouble shooting, and with some luck maybe even get the damn thing working. Thank you!!

@RCworstwater 4 жыл бұрын

Thanks for watching! Give us a call if you need any help troubleshooting: 855.329.4519

@gremaley1 4 жыл бұрын

Very useful video, I tried yesterday to prime an irrigation pump and failed... now i know why! Gradually opening up the ball valve and allowing a little back pressure to keep the pump from throwing all the water out initially is the key. Nice job!

@RCworstwater 4 жыл бұрын

Glad it helped

@pescando 4 жыл бұрын

Lifesaving tutorial. Thank you so much.

@RCworstwater 4 жыл бұрын

Glad it helped!

@swapannag1616 4 жыл бұрын

Chris Thanks for all the informative video on Jet pumps. Very useful for the ordinary pumps owner. However, kindly explain what all the electrical fittings for a new installation like on/off switch, DOL starter, MCB etc

@Autobotsunited 3 жыл бұрын

Awesome video. Thanks!

@glennminnis2201 4 жыл бұрын

Thank you so much .... I did this to my well and it worked out well ..... haha ... I have two wells on property one that is a deep drilled well and the other is a dug shallow well this is the one that had the problem... thanks to your video I have both working now

@RCworstwater 4 жыл бұрын

Great job!

@Whaaat2008 Жыл бұрын

Jeremy F at R.C. Worst just helped me to diagnose this problem. Very impressed with them!

@RCworstwater Жыл бұрын

He's our best employee!

@docstevenamp 2 жыл бұрын

Very good stuff. Thank you

@begayty6342 4 жыл бұрын

Thanks for the video man very informational

@RCworstwater 4 жыл бұрын

Thanks for watching!

@core251 8 ай бұрын

That hand primer pump was exactly the idea I needed! I went and found one online and it just happened to be from your company. Heh what a coincidence.

@yrtuag 2 жыл бұрын

Just subscribed with both my YT channels. I appreciate all the very informative videos and thanks for sharing your knowledge. 👍😎🤠🇺🇸

@RCworstwater 2 жыл бұрын

Welcome aboard!

@OnerousEthic 4 жыл бұрын

Well done! No BS! 😌

@greenxservices7903 Жыл бұрын

Awsome bro thanks a million

@ujjwolkc3786 3 жыл бұрын

Thanks u saved my money. like and subscribed 👍👍

@RCworstwater 3 жыл бұрын

Thanks for the sub!

@harescrambled Жыл бұрын

Had one this past weekend...pump was cycling every few minutes with no water running. Our pipes are below frost line into the basement, and this one had water entering the basement by the pipe entry between the slab and block. Ended up the 1-1/4 pipe had a leak in it just outside the wall. Was fortunate, as the wellhead is buried with a sealed casing. (Casing vent runs into the basement along with the pump piping)

@Josh-ew1le 4 жыл бұрын

Excellent thanks

@getuliolima3960 2 жыл бұрын

Beautiful done

@RCworstwater 2 жыл бұрын

Thank you! Cheers!

@tech4131 3 жыл бұрын

I have a goulds jrs7 jet pump. It is a bit different from what you have shown. A teardown down of a jrs7 would help greatly to show the difference and this country boy.

@daleval2182 5 жыл бұрын

Water from valve shooting in air beside 600 v disconnects cool

@VArun-bb8ph 8 ай бұрын

Great content, thanks. What is the best reliable above ground jet pump for 100 ft. deep well?

@brianschnepf9558 5 жыл бұрын

Great video. What is the model pump you used for your video? I have a small 1/2HP pump for water at my dock on a lake and I am looking at adding a second pump which will either supply a water fall or run irrigation. Pump be installed outdoors, will sit approximately 5' above the water level and I would feed water horizontally around 250' and vertically 30'. Do you recommend a shallow well jet pump for the application.

@bhojpuribhajans Жыл бұрын

Excellent!

@RCworstwater Жыл бұрын

Thanks for watching!

@cloaizap 4 жыл бұрын

Saved my day!!! The not WORST video ever!! THANKS!!!

@RCworstwater 4 жыл бұрын

Thanks for watching - glad we could help!

@dadtechmech 2 жыл бұрын

Interesting tutorial in priming new gadget for suction gud day

@billwest9110 Жыл бұрын

Use a 1/2hp jet pump set to 20 psi for irritation from a stream to 2 faucets 20 feet in separate directions. Ball valve is easiest way to prime. Stream foot sucker closes without draw so priming once per month only. Cleaning sediment out of pump housing is performed by closing faucet valves and opening ball valve until clear.

@AngelofOntario Жыл бұрын

OMG, THANK YOU!!!! You just provided a fix for something I was trying to find a solution for!!!

@shaneliffin6116 2 жыл бұрын

I'm setting up a jet pump at an old well to water my garden. Do I need to build a shelter to keep the pump dry when it rains?

@eltonron1558 2 жыл бұрын

What if I put a check valve between the disconnect, and the pump? Would that keep it primed?

@JohnSmith-gu6hf 4 күн бұрын

I have a lot of water in the water line coming from the well to the pump. How do I get that air out?

@sidneywhite749 3 жыл бұрын

Should the pomp need an enclosure if mounted outside? I live in south Florida?

@manorwahraymond7765 3 жыл бұрын

U are the best

@RCworstwater 3 жыл бұрын

Thanks!

@backyardmayhemusa 4 жыл бұрын

Great tutorial! We have a jet pump for a sprinkler system. When we prime it using your technique (fill the whole intake, then slowly open the valve after starting the pump) it still does not create the suction and pump water. We checked all our fittings to ensure they are air tight. Any ideas or recommendations are appreciated?

@uriahhunter1117 2 жыл бұрын

Instablaster...

@kevinxiwang9154 3 ай бұрын

very helpful. thanks

@RCworstwater 3 ай бұрын

Glad it was helpful!

@Arejayy8 Жыл бұрын

Can I use a shop vac or something to suck the air out also?

@mainelyelectric 4 жыл бұрын

Also have you had any experience with a Gould’s irrigator? I was looking at them for future expansion of my farm irrigation system but currently my system is a J5s and is always pressurized all 1 inch poly pipe. With the currently longest run of 1700ft But I would like to increase my mainline from 1 inch to 1 1/2 inch like the irrigators output and still allow me to only open one of the 1 inch or 3/4 side zones. But I recently talked to Gould’s and they said that the irrigator doesn’t like to be reduced down. Then how are people supposed to control zones that is technically reducing by closing zone valves isn’t it? Can you install an irrigator in a pressurized system with an expansion tank and pressure switch so that it will control the output without putting too much back pressure on the pump?

@timhatt1148 3 жыл бұрын

Dude's like: I'm gonna show you how to prime a pump in a dry lab with adequate standing room using the best, most ideal fittings and valves with the water source at my feet using a larger pump than the typical one found in most homes.

@tylerwinter512 11 ай бұрын

Oh man, I’m feeling this comment right now. Crawl space is cramping my vibe right now.

@anitaenriquez2629 5 жыл бұрын

Wooow man 👍👍 arriba México

@gwarrichmond6232 4 жыл бұрын

Make sure if you have a jet pump make sure to keep it warm come winter. I've lost 2 due to freezing water in the area that you prime the pump, froze then busted !!! My own preference is junking the jet pump and get a submersible pump. Just my 2¢. Lot of less headache 👍🏼.

@RCworstwater 4 жыл бұрын

Good Tips!

@fastspanish4804 4 жыл бұрын

I have an idea to solve ur problem ..self priming all u have to do is keep the water from leaving the volo the pump housing to do so u have to make 1. the suction pipe slopped towards the pump or 2. use an s like a p trap. let me what u think thanks

@gfriedman99 5 жыл бұрын

Can you use a self-priming utility pump like little giant for example to prime the jet pump? My jet pump has a hose bib connected to the priming port. Conversely why cant they make jet pumps self priming?

@Comedyhoose 2 жыл бұрын

Jet pumps work off suction, hence any air in the system will not allow it to prime, if you want a pump that doesn’t require priming submersibles are the way to go

@JustinWhiteKSS 5 жыл бұрын

I have a shallow well pump (above ground) with pressure tank and am about to replace both as the tank is leaking and the bearings on the pump are about to give in. My question is should I put a check valve before the new pump or after (on t-connector intake before the pressure tank). Thank you!

@RCworstwater 5 жыл бұрын

You will need on the end of your suction line, the others are usually not needed.

@JustinWhiteKSS 5 жыл бұрын

R.C. Worst & Co., Inc. Thank you for the reply! Could I have one already installed somewhere midway in the well? If I mount one to the line going into my pump from the well, would it be sufficient?

@bryanboutilier9907 Жыл бұрын

I installed a new pump with a check valve at the inlet and new pressure tank. I can’t get the system to prime. Any help would be great

@omairbinenam6337 2 жыл бұрын

4:38 I don't have a ball valve or any kind of valve on the outlet pipe. I have a pump that does not self prime and loses its prime every couple of hours. the outlet pipe goes all the way up to an overhead tank. So yes it is quite a long pipe. Does installing a check valve at the end of the outlet pipe (overhead tank) would make any difference? or perhaps an air valve to let the air out? Currently the outlet pipe is valve free and perhaps air can enter it if it is not carrying any water in it, thus making prime very difficult. Thanks.

@mariecarmelmerise9644 3 жыл бұрын

Hello. I have a 65 ft well and a goulds pump JRD7 Je pump. Could they match to aspire water?

@creo3744 3 жыл бұрын

Like your video! Do you have detail installation of a "Single Pipe Jet Kit for 2" Deep Well? Pump is Goulds-J10 Double Nose Deep Well. Appreciate your help. Thanks

@RCworstwater 3 жыл бұрын

No, sorry

@michaelcrimi99 11 ай бұрын

Do you recommend a check valve on the intake side? Or is a foot valve better, if it will fit into the casing in a point well? And is a foot valve susceptible to clogging ?Thanks

@RCworstwater 11 ай бұрын

Just a foot valve is all that should be used on most systems.

@davidkyser6103 3 жыл бұрын

I have really hard water...build up quickly...with in months...over powers my shallow well pump...is there a pump that does not allow the build up on the impellers and bearings and seizes the pump...it is not cast iron...should I use a cast iron for better hard water resistance....has to be 25ft and 50 psi...

@karendadd483 11 ай бұрын

Hi i dont have any quick release valves on my system i draw water from the lake into a 1/2 horse jet pump its connected to a 20 gallon holding tank ..i cant get prime on pump ..filled line up from lake and installed a new foot valve on lake side ..have filled pump with several gallons of water and pump still not primed ..should i fill the tank up with a water hose first then try to prime because air bubbles still coming up Normally i dont need to do this there is a valve to the tank should i shut it to prevent air from tank from entering..thanks

@atoulieneikha2811 2 жыл бұрын

How much hp is that

@whislerwildlands2903 2 жыл бұрын

I moved into a house that has a Shallow well/ jet pump but I lose my prime over night. Its starting to get frustrating!

@joan-mariecourneya3719 2 жыл бұрын

Where’s the link to buy that item u recommended?

@RCworstwater 2 жыл бұрын

Here: www.rcworst.com/lane-6-byco-502-60-hand-priming-pump.html

@papajoe5331 2 ай бұрын

I am looking to water a large grass area which is about 150’ from my water source I do have power 240v I’m liking g what is see instead of a jet manual Honda jet pump / generator type Would your setup in this video work? With a big gun sprinkler sprayer

@RCworstwater 2 ай бұрын

Give us a call: 855.329.4519

@Bo9508 5 жыл бұрын

Would a wet/dry shop vac be able to raise water to the pump?

@RCworstwater 5 жыл бұрын

I doubt it would be able to. You'd need an airtight seal to try which would be difficult

@Blacksheepishot 5 жыл бұрын

That's ok for a shallow pumping single pipe system but a two pipe 2" deep well at 120 feet can be a real nightmare, especially in drought conditions to keep it primed.

@dkdj5 Жыл бұрын

Where are the pumps on your site? I was unable to find them. Please provide a direct link.

@RCworstwater Жыл бұрын

www.rcworst.com/wade-rain-6-9-30-hand-primer-pump.html

@Apielakos 4 жыл бұрын

Hello i have a 7.5hp centrifugal triphase water pump. Now I get water from a spiral rubber and foot valve drill. The water level is about 4 meters deep. Now I would like to put a check valve on the surface of the tube. My pump will be able to draw 4 meters of air between the pump and check valve to bring the water up;

@Apielakos 4 жыл бұрын

Is for agricoltural use. My water well metal tube is 3 inch and now have 2 inch greek spiral plastic tube with 2 inch foot valve. (my water well is 14 meter height) (water stay at 4 meter) ( my spiral 2 inch tube with foot valve is 8 meter). But i don't have the max power on water pump. I see on the spinklers. Now i want to change it. I want to use 3 inch check valve on metal tube. But because water stay 4meter, my pump can up 4 meter water up on pump? Sorry for my very bad English

@nicholasyoder 2 жыл бұрын

I have a jet pump with a tank how do I prime this thing?

@robertjahrling1877 4 жыл бұрын

Ok So I have watched several of you videos. I still can't find one that will tell me what happens if a bladder tank has only got 5 lb of air in it. I'm having problems with my pump as soon as I get it to prime it automatically turns off. why would this happen??????

@RCworstwater 4 жыл бұрын

Give us a call and we can help you troubleshoot: 855.329.4519

@joshuademeio8357 4 жыл бұрын

Would anything change if I have a brand new, empty pressure tank? Would I still crack the valve at the discharge, turn power on, than close the discharge until the pressure tank fills, than fully open discharge? Thanks

@RCworstwater 4 жыл бұрын

After you crack the discharge you don't need to close it again, other than that your steps are spot on.

@joshuademeio8357 4 жыл бұрын

R.C. Worst & Co., Inc. awesome thank you! So my discharge goes to a hose bib. Should I have the hose bib open while I’m priming or have it closed?

@eabawendy 4 жыл бұрын

Brother I just found your channel looking for a way to fix my MYERS well pump and just subscribe cause your work is awesome brother.... Quick question my pump only gives me air pressure with a little bit of water sometomes. The preasuere is strong but no water just sprays here and there. Please help friend.!

@RCworstwater 4 жыл бұрын

Sounds like your pump may be losing its prime, I would first verify the foot valve is functioning and holding water, then fill the pump and suction lines with water and try to run it. If the problem continues contact me with the problem. Thanks for the sub!

@elcomandante9299 Ай бұрын

I loose prime in my well one or twice a week. Cant pinpoint as to how/why..

@waterpartnership Жыл бұрын

Thanks for your instructions. however somehow air seems to be preventing the jet pump from taking the prime. I have a 2 inch pvc pipe in a lake with a foot valve on the end. the foot valve has a screen on the end to prevent dirt getting unto the pipe. on the top of the pump there is an opening to pour water into the pipe and into the pump. I can pour water into the opening that puts water into the pipe in the lake and into the pump. After putting about a gallon into the pump, the water gets to the top of the opening and I screw the threaded into the opening. There is a pumptrol and a pressure Gage on the pump. I also have a 2 inch flexible hose that connects the pump to a pressure tank. When I activate the pumptrol I can see water moving in the flexible hose, however I can also see air in the hose. I don't understand where the air in the hose attached to pressure tank is coming from. Even if there was air in the hose wouldn't the jet pump still be able to pump water into the pressure tank? Thanks for any advice you can provide!

@sandspritpark 4 жыл бұрын

@mainelyelectric 4 жыл бұрын

Is that a irrigation pump? I thought that the irrigation ones were not really jet pumps?

@darwinmanican1523 4 жыл бұрын

I have a water pump sir,if i start the pump its very heat the body,,what's is the problem sir,,

@bwagenberg 3 жыл бұрын

Where can I find a priming pump available everywhere? Your source only ships directly, no distributors. Need it fast.

@RCworstwater 3 жыл бұрын

We can ship it expedited (UPS Next Day Air). View the rates on our website: www.Rcworst.com

@jamesa6272 4 жыл бұрын

What would cause a pump to lose prime with 80 foot lines goulds jet pump. 2 hose ejector and foot valve. Do the ejector/footvalves get stuck open? If no holes in the lines what would cause a system to lose the prime or lose pressure when primed?

@RCworstwater 4 жыл бұрын

It would have to be the foot valve if there are no holes in the pipe.

@lapdogg Жыл бұрын

But how do you prime the pump when the lines run down hill about 100+yards and the lines were completely dry because you just had to change a foot valve and you continue to add water but it seems like all the water is probably just disappearing because you never get to the point where the pump seems to be full of water so you can run it? Is there a way to push compressed air into the line to basically create a siphon so the lines can be full again and you only need to fill the pump? This shouldn’t be this hard and yet… I’ve been without water to my house since January because the damn pump won’t prime.

@waynegalvin4639 4 жыл бұрын

Good video, where do you get one of those priming pumps, how deep of a well will it prime and how much are they?

@RCworstwater 4 жыл бұрын

They will work to any depth, it will just require more pumping the deeper the well is. You can buy them here: www.rcworst.com/lane-manufacturing-co.html

@waynegalvin4639 4 жыл бұрын

That is awesome, I think I will get one from you folks.

@waynegalvin4639 4 жыл бұрын

Just ordered one!

@RCworstwater 4 жыл бұрын

@@waynegalvin4639 Thanks Wayne!!

@waynegalvin4639 4 жыл бұрын

Wow, it already shipped!

@chandradipkumar7254 4 жыл бұрын

Jet pump kitna fit tak water othate hai

@tylerpalmer6615 3 жыл бұрын

Does having a pressure tank and a jet pump change the process at all? And if you can't disconnect the suction what is the actual process? I'm trying to hook my 1000l tote up to a tee in the suction, hopefully that will work (or will that just trap air below the tee and cause other issues?). The top of the water in our well is probably 15' lower than the pump right now.

@RCworstwater 3 жыл бұрын

Give us a call: 855.329.4519

@tylerpalmer6615 3 жыл бұрын

@@RCworstwater I got it figured out thanks! I think there was some crud in the foot valve, and it flushed itself out. My daughter was watering her garden, and emptied the well!

@joshuademeio8357 3 жыл бұрын

My pump keeps losing prime. I’m not pulling water from my deep sand point well. Could it be the well is dry or a bad foot Value? Any advice? Thanks

@RCworstwater 3 жыл бұрын

It is likely that the well is dry. Typically sand point don't have a foot valve - just a check valve near the pump. You could try replacing that check valve and see if it fixes the issue.

@ronniedarling7972 Жыл бұрын

Yea my crawl space is 10' high and all that crap definitely fits in there 👍🤣

@widehotep9257 Жыл бұрын

I have a brand new flotec deep well vertical 1hp pump that is leaking at the gasket between the pump and the plate that contains the pressurized line and 1-1/4 return line. I am wondering if I can replace the gasket with silicone gasket maker? Is that stuff safe for a drinking water system?

@RCworstwater Жыл бұрын

I don't think that will work.

@widehotep9257 Жыл бұрын

@@RCworstwater Any advice for leaking gaskets?

@RCworstwater Жыл бұрын

I would try calling the factory to see who can sell you parts in your area.

@fz7502 Жыл бұрын

Just noticed having a water test bench with Hydro just behind can be dangerous

@Jim_why 4 жыл бұрын

Hi I have an existing well that's holding water but hasn't been used in 20 years I want to put in a hydrant so that I can use it in my swimming pool how do I do that

@RCworstwater 4 жыл бұрын

You'll need a pump! Give us a call and we'll help you pick the right one:855.329.4519

@Daniel-Six Жыл бұрын

Funny... I never have to go through any of these steps to prime and operate my jet pump--which has no check valve to retain water in the suction line. Just pour water into the discharge port till the volute is full, turn the pump on, then screw the discharge hose on to the port before water emerges. Never fails.

@eddiedeleon2425 3 жыл бұрын

is it Myers Pump Sir , i don't think so

@corycloss59 Жыл бұрын

Hi Chris. Why wouldn't you just hook a guzzler pump up to prime it? Isn't that simpler? Your pump priming pump is essentially the same thing. Any reason as to why that one over a guzzler?

@tymetabooker 4 жыл бұрын

I replaced just about everything on my water system and come to the that my pump casing is clogged! Of course its the very last thing i thought i didnt need to replace cause it still pumped water...QUESTION: Is there any safe products I can use to dissolve sediment in my pump casing??

@RCworstwater 4 жыл бұрын

You'll have to disassemble and clean it by hand.

@tymetabooker 4 жыл бұрын

@@RCworstwater impeller was slipping from motor shaft as well, bought a new pp. thanks for the reply! Its very humid now in the pp room .. need a dehumidifier now lol. one thing after another

@tymetabooker 4 жыл бұрын

I replaced everything new... I now everything that can go wrong with a well pump lol. motor shaft was slipping on the impeller

@normanchambers8169 4 жыл бұрын

You were talking about how the well loses its prime because of the air going in between the connections. You didn't mention putting in a check valve so it wouldn't lose its prime. Why?

@RCworstwater 4 жыл бұрын

Various situations can occur that lead to loss of prime on an existing pump install, and this video is intended to help people get their system primed and back to operational. This video was not created as an installation guide for a immersible type pumps. Foot valves are a critical component in preventing prime loss in nearly every immersible centrifugal pump on the market. I do not recommend a check valve on the suction line if a foot valve is present, this can lead to difficult troubleshooting down the road.

@obfuscated3090 3 жыл бұрын

Check valves can be problematic and a check valve won't save a leaky system if the leak (for example) is below the check valve because seepage will dump the prime which a non-self-priming pump will not recover. A check valve on the inlet side of a pump (if the pump is not so fitted) prevents the pressure tank from dumping back through a seeping foot valve but doesn't itself maintain prime in the well pipe. It also PREVENTS pour priming unless you have one prime fitting (verticals like shown in the video hold a funnel nicely, and use a gate valve for reliability as shown) for the pump and another for "everything on the well side of the check valve". You can also buy self-priming pumps but they are considerably more expensive. My water tends sandy so my spare pump will be self-priming after I replace a worn foot valve (and all the well piping because PVC is cheap and broken well pipes SUCK to fish out if the owner didn't leave a line, I will use stainless aircraft cable since I'm a jet mech, love overkill and cable is thousands of pounds stronger than rope so a pinched casing should it happen may be overcome with winching. I always buy my next pump including replacement pipe fittings and wiring after installing a replacement since I expect to live long enough to need it and they don't break at convenient times. This worked nicely for thirty-plus years and I do it with all my plumbing parts when I replace wear components.

@butchmotorshoptv 5 жыл бұрын

For 100 feet shallow well, If I will use Jet pump, how many horse power required?

@anthonyjohnson1504 5 жыл бұрын

I use a !HP

@denverlao8579 5 жыл бұрын

Butch Gratil 1

@barrywuthrich8530 4 жыл бұрын

do you have to prime a submersible well when you change the pump and motor? Seem like you wouldn't with the pump right at the motor.

@cxaxukluth5407 4 жыл бұрын

Might anyone know why, when I prime the suction line, the water totally disappears! I’ve poured 30+ gallons. The pump will still pull water up but there is a lot of air in there... I guessed that the well is dry, grandparents are adamant that’s not the problem. Will a loose pipe on the suction line cause a problem like that?

@RCworstwater 4 жыл бұрын

Yes, you definitely have a leak in the suction pipe. It is most likely in the foot valve, located at the bottom of the suction pipe. Pull it up and inspect. If it is the foot valve you can buy a new one here: www.rcworst.com/Valves-c80.html?Attribs=504&

@riverrivers250 3 жыл бұрын

Same principal with a water transport truck??? To fill homes with holding tanks and all that

@garymagliocca2913 5 жыл бұрын

I have a shallow well pump that has burn up the impeller. The pump has a tank with a bladder. I want to replace this pump with a jet pump. Does a jet pump require a tank with a bladder.

@RCworstwater 5 жыл бұрын

Gary, please give us a call and we can help you find the best replacement: 855.329.4519

@anthonyjohnson1504 5 жыл бұрын

Yes

@TheChronicsmoka Жыл бұрын

The link to the hand primer pump doesnt work.

@RCworstwater Жыл бұрын

Thanks for the heads up. Here it is: www.rcworst.com/wade-rain-6-9-30-hand-primer-pump.html

@heimeygazzonteight7347 Жыл бұрын

Just burned out a brand new Ecoflow 1 hp shallow well pump The company used a soft rubber line to the pressure switch and it blew off flooding my basement and seizing up the motor. The issue i had before this happened was it never would push past 35 lbs though its a 40 - 60 RATING. It was difficult to set up to work properly The pressure switch would rapidly click on and off when it was to turn on. The only way i could stop that was to tighten the main bolt but then it wouldn't shut off. I did finally get it to turn on and off with out that rapid clicking on and off but never got the pressure to rise past 35 lbs. HELP!. Im returning the pump tp Home Depot tomorrow and getting another pump

@papajoe5331 2 ай бұрын

why no foot valve or check valve..

@RCworstwater 2 ай бұрын

There is a foot valve on the suction line.

@jesusverdascominana2444 4 жыл бұрын

Qué cambiado está Sergio Canales

@jarredsdad 2 жыл бұрын

I love the fact the “expert” is playing with water in front of all of those disconnects.

@sammyg3697 5 жыл бұрын

What if the suction pipe goes above the pump and then back down to it?

@RCworstwater 5 жыл бұрын

That means you have a "Deep well" jet pump. Both pipes must be filled with water, as well as the pump volute.

@sammyg3697 5 жыл бұрын

R.C. Worst & Co., Inc. no like I have a shallow well pump and I'm wondering if I can have the suction pipe go up to a rafter from the pump and then over and into the pipe going into the ground

@RCworstwater 5 жыл бұрын

@@sammyg3697 It is possible, but it will be a nightmare to keep it operational like that. You would have to add a priming port at the highest point of the suction line and fill it from there. Any air that entered the system would collect there and likely need to be purged/reprimed fairly often.

@sammyg3697 5 жыл бұрын

R.C. Worst & Co., Inc. ok, thank you for your time

@RCworstwater 5 жыл бұрын

@@sammyg3697 Anytime! :)

@Peter-House-Jr 3 жыл бұрын

Thank you for the informative videos. A pump test stand with large electrical panels behind the human - what could go wrong??? Even if there is a GFCI involved - why trust your life with it??? Just saying . . . you know your shop.

@KeithEElam 2 жыл бұрын

Bahahaha!!!! i was waiting to see who caught that shit!!! thats fucking hilariouse