How to Prime a Kiln Shelf with Lisa Vogt

Рет қаралды 1,306

Күн бұрын

Here's a short video on how I prime my Kiln shelves. You can find the Kiln wash at any local glass art supplier.
If you enjoy my videos please consider subscribing to my KZfaq channel, also don't forget to like and fallow!
For more content you can visit my website which is loaded with resources for you!
Happy Fusing!
lisajvogt.com/

Пікірлер: 18

@maggiebannenberkowitz9254 Жыл бұрын

Thank you for this. I don't prime mine often but will now.

@AnnetteRintelmann 2 ай бұрын

THANKS SO MUCH!!!!!!!!!!!!!!!!!!!!!!!

@iamlennii6791 Жыл бұрын

I just did mine today, how funny. I sand off the old residue first as it might apply unevenly otherwise

@suzieguirsch1065 Жыл бұрын

Thanks for showing us how to do this 🙂

@soobraunstein2207 Жыл бұрын

Do you scrape your shelves every time? That's a video I'd like to see.

@LisaVogtglassartist Жыл бұрын

I do not scrape them every time. I scrape them if the primer looks thin or is chipping, then I'll re-prime.

@janicemanders2106 Жыл бұрын

On a full fuse on my freshly primed kiln shelf(let it dry for a day) I still have some dot tails? What is that from? Thank you for the video.

@LisaVogtglassartist Жыл бұрын

It might be from your water to primer ratio, It might have too much water and be running. I would try adjusting the ratio and see if that helps!

@sarahwilkinson873 Жыл бұрын

Thank you for that. I use thin fire but it is a faff and non good for you as I’m sure you know. Do you ever have primer stick to your glass?

@LisaVogtglassartist Жыл бұрын

Yes, primer will frequently stick to white glass and when the glass is heated above fusing temperature of 1,465F like when your combing glass. You can remove it with a single edge blade or you can use bathroom cleaners that help remove calcium build up. :)

@sarahwilkinson873 Жыл бұрын

@@LisaVogtglassartist thank you 👍

@elainefuehrer5739 Жыл бұрын

do u ever remove the primer from the shelf and if u do How? wasnt gonna watch this video, but it was informative esp on the fiber board

@LisaVogtglassartist Жыл бұрын

I will remove primer if there's signs of wear, it looks thin or the primer is chipping. But I don't scrape them every time. I will make a video showing/explaining when and how I scrape my kiln shelves :)

@marieskiles7222 Жыл бұрын

Do you clean or scrape off the used primer after firing?

@LisaVogtglassartist Жыл бұрын

I do not! I prime right over it UNLESS there's signs of wear, it looks thin or the primer is chipping.

@WifeOfAHero86 4 ай бұрын

After you prime how long do you have to wait before you can put the shelf in the kiln.

@LisaVogtglassartist 4 ай бұрын

It depends on how many layers of primer you add but you can use it as soon as it all dries. It doesn't take too long for the primer to dry and if you leave it outside on a sunny day it should dry within 30 minutes or so!

@WifeOfAHero86 4 ай бұрын

@@LisaVogtglassartist thank you!