You can find Scion tC chip key here: amzn.to/30fWTKR (this is an Amazon affiliate link)

This worked really well. Saved me $50.00 for me the detail about the marking on the blade was not consistent. Mine did not match the master key and it worked just fine. You do have to do the steps a little faster than his video. But it worked perfectly! Thank you!

Thanks to this video I was able to program my scion tc 2005. When I got the car it came with a regular key (black one with transporter chip only) After 6 years I learned that I have remote power locks I just bought the transporter chip key on your link. Follow instructions on how to program power lock and transponder chip and and got it right the first time . Now I can open and close my car doors remotely and use that same key to start the engine. THank you DIY-time.

Hello. Please ignore my previous messages. I was able to get it to work. It appears I may have been waiting too long to insert the new key after entering programming mode. I also followed your instructions and got all the buttons to work. Amazing. Thank you so much

Thank you, you saved me $100's. *IMPORTANT NOTE* If the key doesn't program on the first try, try it again. If it still doesn't, step on the brake or open the door to reset. Try again. If it still doesn't program take a short drive. Then let the car sit awhile. Retry the programming. It worked for me. But, not on the first few tries.

This video actually works. Just follow what the instructions say. Thanks again!! Saved hundreds..

Awesome! Didn't program correctly first time. Followed the steps again and it worked like a charm. 😁

This worked for me today on 12-24-18 (2008 Scion Tc) Thank you!

Best video and instructions I have found for programming replacement key for 2005 Scion tC. 2 "key" things to remember: 1) make sure you purchase the key with fob and chip. Costs around $20 for one. If the cost is about half that, you're probably only getting the shell with no guts. 2) There are two separates processes to follow here. First process (whites what the video shows) programs the key, but not the "lock" and "unlock" buttons. Second process which is referenced in the video comments and on the DIY-Time website is what then programs the buttons on the key to lock & unlock the doors.

This just worked on my 2005 TC. Thank you!

This worked great. The key I received from eBay had no dot but said it was compatible with the dot that my original key had. When it showed up there was a separate chip that had to placed inside the fob. Don’t throw this away! It’s not just a random piece of plastic.

Thank you sir, you saved me a lot of money 👍🏽

This is awesome! BTW, I tried to enter the programming mode with the valet key, as our lost key fob had broke in two. But the valet key would not work. As soon as I used the broken key fob, it worked!

This worked perfectly on my 2006 tC I had to do it a couple of times b4 it linked but it worked!!!!!

Thank you very much for your great explanation about how to program the key so you helped me to save a few bucks cause i did it myself

Worked great used ur link for getting the key buttons to work pls make a video for others Also had trouble Getting it cut needed to go to dealership certain stores policys wouldnt let them Cut it

Thanks DIY-time! Your programming instructions worked! Plus if you can prove you own the Scion (title or registration) the Toyota dealer will cut the key for free!!!

Many thanks !! saved $70 at the Toyota Dealer

Thank you brother you save me a lot money! Scion Tc 2007

Thankyou, you save me money! 👍

Works great… thank you

For all of those who followed the instructions but continue to get a blinking light for over 60 sec. Inside the master key there is a small rectangular shaped chip on the left side, that you will have to remove and place into the new key fob set. I used a exacto knife and a small pair of needle nose/wire cutter to remove the chip. Then insert the chip into the new key fob housing in the same place as the master. This chip is necessary for the key to signal to the ignition immobilizer to start the car. I hope this helps. My new key fobs work great.

Thanks a lot work out just perfect, you save me $100 to program a new key🙏🏻

Thank you so much! Worked on first try!

Thanks so much! Worked like a charm!

Excellent video

Worked like a charm.

Worked like a charm! Thank you so much!

Worked for me, had to put new key in b4 the light turns off like 5 seconds

Thank you so much! It really worked

Holy shit it worked! The stealership wanted to charge me $300 to "reprogram my car" so it's compatible with a new key

Thanks you help me a lot great video !

Got same problem with my Suzuki Swift 2008... I hope you can have a video of programming Suzuki Swift chip key and no tools required

It worked!!!! Thank you!!!

Thank you so much this work out great for me was able to program key and the program the buttons A+++ for your video

Thank you!!

After trying 3 times it worked on my 2007 Scion TC. The master key should be in and out 4 times quickly.

This step is only to program the transporter. There is a different code to program the buttons ( lock, unlock and panic buttons) on the fob key. I don't know it but Ace hardware store charged me 15 dollars to program the buttons and it included the cutting as well. I bought the key at amazon for 20 and 15 for set up. Total investment was 35 dollars compared to 345.76 from quote of dealer. 2007 scion tc 2.4L. You don't have to do nothing to the key Ace will program the transponder and use a diagnostic key tool and do everything for 15 dollars. Let me know if anyone has any more questions.

Thank you so much for this, it’s been so long since you post this video and still working, I had just one key(original) and I did another one and followed your video and successfully programmed my key, thanks a lot 🙏, but the only thing that my key don’t do is lock/unlock doors, do you have any more steps for that?

For the buttons to work on the 2006 TC >> On-Board-Programming (OBP) for a 2006 Scion (Dot Stamp) (Procedure 671) 1. Start with the following conditions a key is out of the ignition bDriver door is open Call other door closed) c. Driver door is unlocked (other door don't matter 2 Perform the next two steps within seconds a. Insert the key into the ignition (don't turn it) and pull it out b. Insert the key into the ignition (don't turn it) and pull it out 3. Perform these steps within 40 seconds! a. Close, then open the drivers door b. Close, then open the drivers door Insert the key into the ignition (don't turn it) and pull it out: 4. Perform these steps within 40 seconds a Close, then open the drivers door Close, then open the drivers door c. Close the drivers door. d. Insert the key into the ignition and leave in the ignition to OFE Turn the ignition to ON (as far as you can go without cranking Your engine), then bad tiemve the key from the ignition 5Within 3 seconds the power door locks should cycle (156k then unlock) automatically indicatie 6. Perform these steps within 40 seconds: successful entry into programming mode. Return to Step 1 if the looks do not cycle at the itself and hold for 2 seconds. Within 3 seconds, the door locks should look then Press the lock and unlock buttons on the transmitter simultaneously for 1 soon unlock) once indicating successful programming. Wait 30 secs and that should work or repeat..

Hello! First of all I love your great and descriptive video! Thank you for posting this for everyone to see. One question. How do I know if this method worked on my tC. I don't have the spec version

I love those pedals on the tc. I was wondering where you got them from?

Thanks 👍👍👍👍👍👍😀😀😀😀

Would the new keyfob lock and unlock the doors or no???

This worked on my Scion tC 2006 now to program the fob to lock and unlock is a different procedure will send the link that I used that came with the key

I’m having trouble programming my key, it’s not going into program mode. I do not know why.. have you ran into this problem before?

Fisrt of all thank you for this great effort and this amazing video . Please I have Toyota Corolla 2013, I just have only one key. I need to buy 2d one for backup and program it. Any help please ?

My master key is not working as keyless entry, i put a new little battery in it. Will it work to reprogram a master key?

Any instructions or video on how to program the key fob? Thanks for the video, liked.

I love you

Thanks bucko 😈

I bought the key using the link you suggested and when I received them they did not have the dot on the key so they will not work

Would this method also work if you the rfid chip already programmed but not the buttons?

I’m new to cars and I have i Scion tc 2010 and I thought the blinking light means that something was wrong with my ignition lol. But as in the video when I put the key in it goes away

Can you tell me what Frequency is the 2009 Scion XD key? I can't find it anywhere.. 1. Isnit the same as a Toyota Matrix/Venza... FCC ID: GQ4-29T, GQ429 Frequency: 315 MHz Or is it like a Rav 4...: 2. FCC ID: HYQ12BBY IC: 1551A-12BBY Frequency: 315 MHz

Do all the 2005 Scion tC's come with an alarm?

Can you please post a specific link to the correct key I see a lot of keys there without the dot

Thank you for making this great video, it saves us Scion owner money. Before you proceeded the open and close door procedure, did you turn the ignition on? Thanks.

Great video, bro! Will this work on a 2009 Corolla?

How do you set a 2015 Toyota Highlander remote control control

The key was a little big do i have to take it to a locksmith to make the key match the original??

What is I had a key made with no buttons but I found a key at the junk yard with buttons that has already been programmed to a different car , would it still work? I just want it to unlock and lock the doors with the buttons

My daughter has a 2009 scion tc. Her key was broken off and it will still let the car turn over but not start does she need a new key with the top fob?

Hi. All my keys are gone to my 2005 TC. I'd share how but that's for a different channel. I went to your website but did not find how to do it without any keys. Help.

my key works but the buttons don't unlock the car. how do I make the buttons work? this process works until the final step in which it's supposed to stop blinking after 60 seconds. I get a double blink and it never stops. maybe because the key is already functional? I just want to use the button so I don't have to unlock it by hand every time.

When you do this, is it programming the chip inside the key or the car? I want to make sure that I have a spare key just in case I lose it. Will my old master key still work afterwards? Kind regards for your help!

Fam my key broke(key came off the black part) and i used the site you sent on Amazon. So for sure its applicable to 08 scion tc? From these comments it seems to work. If it does, i swear you are god jesus on youtube

Does the new fob unlock and lock work? 7/14/23

Any suggestions regarding the Scion xB 2012? Same key, but there is no light to blink.

Easier than I thought! Does this even work for 2013 model? My car looks a little different.

My son purchased a 2005 Scion tc. With it only came one key, and it was the Valet key. He has locked himself out several times and we are in need of a key, without paying the dealership here $200.00 plus $55.00 to program it. Is the link you provide a link for this year car? And if yes, does it have the "chip" in it? Thanks for getting back with me so quickly your help is VERY much appreciated. Blessings

the key that i got with the car was aftermarket didnt have any buttons on it but is programmed for the car, i ordered a new key and it has buttons, the new key successfully programmed but i cant lock or unlock it with the buttons, what is the fix for this?

can you make a video with out the master key an program the vehicle

I have a 2004 tc scion and I need a keyless entry key . On your Link I only see 2005 as the earliest year make . Any suggestions for 2004 tc scion ? TIA

I have the a 2005 scion tc with the master key missing but it has the factory spare that still works. It just doesn't open the glove compartment. Could I use the spare instead of the original master to program a new blank chip key instead?

I lost my original tc keys, but i had a replacement made at walmart. the walmart keys only turn on the car sometimes, not always. how can I fix that? when the keys dont want to turn on the car it makes that rumbling starter sound.

This seems to work for turning the engine on however the remote lock and unlock dont seem to work. Any suggestions?

I got it programmed and cut, everything works expect to lock or unlock the car function with transmitter, is this supposed to be like that? Anyone know?

For my scion i have a key that doesnt have any buttons (the lock and unlock buttons) but its the original key. Can i still program a key with those features?

I need some help I got the program and the security light does go off when the blank key is inserted but the lock and unlock buttons do not seem to work with new key there is the light that flashes on the new Key so it’s working just can’t get the car to lock and unlock

Hello, can you provide an updated link to which key I should purchase? The link above goes to several different key's and not to a specific one. I don't want to purchase the incorrect one! Thanks in advance!

My 2009 Scion XD doesn’t have a security indicator light. How can I program it without this light?

Where did you get the pedals? I have a 2007 scion tc Manual

My car has a door kit, when it was installed the door sensor was probably cut. My car says my doors are always open, would this prevent me from programming bc of the step with the door

Will this work if you have a similar key that is already cut from a different car of the same year and model?

the link you provided doesn’t have the dot on the metal part of the key and i can’t find a link that does.

Is there a procedure using only a valet key, the only master key was lost. Thanks for your time.

i have a question, my tc is 2006 and i bought my tc and the key that i have does not have a beeper and doesn’t have the dot. will it work anyway?

What If you orgi al key has the key fob chip but wont start the car? Will this still work with a new key?

My security indicator light stays on all the time and when I insert my key it starts blinking in a strange pattern. How can I enter programming mode?

What could be the reason why the lock and unlock button do not work after programming the new key?

can i reprogram an old key? before this video i lost the original and gotten a new one but i found the old one but the old one won't start the car :/

Great video! My lights don't flash when I lock/unlock using the remote. Any clues on how to fix it much appreciated. Thanks

I have a 2015 scion FR-S I just bought and the remote doesn’t work do you know how I could get it to work?

I have a Compustar fob and it just stopped working, I replaced the batteries and tried programming it but it still isn’t working any tips?

Can I reprogram a different Toyota key for my 2019 4runner

Programming the key worked, but the key won’t lock and unlock the car and I’ve tried to redo the programming and every time that I would do it correctly, I would insert the new key and the light would blink twice, stop for a second, blink twice again, stop for a second and then it would keep doing the same thing the entire time what do you suggest that I do?

Funsiona para un Toyota Camry 07?

How do you program the new remote so that the lock and unlock button work once the new remote has been programmed?

You showed a key with lock/unlock buttons in this video. Will that new reprogramed key be able to lock/unlock the doors just like the original one?