How to Program the ESP8266 ESP01 Wi-Fi Relay Module | RemoteXY

How to Program the ESP8266 ESP01 Wi-Fi Relay Module | RemoteXY | FLProg

Рет қаралды 55,924

Жыл бұрын

#flprog #remotexy #esp8266 #esp01 #relay #embedded #iot
The ESP8266 ESP01 relay module is suitable for smart homes and internet of things projects. The ESP8266 ESP01 relay is programmed with the FLProg IDE and controlled with RemoteXY mobile app. The mobile app interface is created with the RemoteXY web interface and the generated code is copied into the ESP8266 ESP01 relay FLProg program. The RemoteXY mobile app controls the ESP8266 ESP01 relay to switch on/off a light bulb.
ESP01 Relay Module 0:20
RemoteXY 1:44
FLProg 2:51
Circuit Connection 5:10
FLProg is a visual or graphical programming language that uses PLC's Function Block Diagram or Ladder Diagram for programming Arduino Uno, Micro, Nano, Mega Leonardo, ESP01 ESP8266, EP32, Intel Galileo and lots more.
FLProg Download: flprog.ru/en/
flprog.ru/en/downloads/distru... (Download the more stable version 8.2.1 from the achieve)
Tutorial Program file: drive.google.com/file/d/1gQpl...
Support videos on this channel when you buy products from Aliexpress with the below link(s).
1. ESP8266 ESP01 Relay Module
s.click.aliexpress.com/e/_Dkq...
2. ESP8266 ESP01 USB Programmer
s.click.aliexpress.com/e/_99Wpyk
3. Jumper Wire
s.click.aliexpress.com/e/_A7zCFy
ESP8266 ESP01 Home Automation Playlist: • ESP8266 ESP01 Home Aut...
FLProg Arduino Embedded Programming Playlist:
• FLProg Arduino Embedde...

Пікірлер: 67

@mdmostafashahid948 Жыл бұрын

Your chennel just a factory of Great Tutorial Videos👉❤️❤️❤️

@OnosTech Жыл бұрын

Thank you so much 😀

@hanseich 7 ай бұрын

So cool. Thanks for making this.

@OnosTech 7 ай бұрын

You're welcome

@jrotten1982 3 ай бұрын

Fantastic Tutorial, thanks

@OnosTech 3 ай бұрын

I am glad you like it.

@TS-gi8zm Жыл бұрын

Could you also do a video on LoRa? Again a great video!

@GordonWilson67 10 ай бұрын

Thanks!

@OnosTech 10 ай бұрын

Thank very much. I am so elated by your support. I am looking forward to producing similar content soon.

@muhammadmursaleen7879 Жыл бұрын

Sir could make a video on attiny programming through LD micro software.

@markperkins9437 Жыл бұрын

In your dialog I think I heard you say you could have multiple relays around the house. Is this correct? If so how does does the control get sent to the right module from the dashboard buttons?

@OnosTech Жыл бұрын

Yes, that is right. The communication blocks will be required for that purpose

@audas 6 ай бұрын

Thanks mate. I have to wire my esp to my usb module and confused about what wires I need.

@OnosTech 5 ай бұрын

Search "ESP01 USB to TTL connection" on google, you should get some circuit diagram

@tukangesteh7789 6 ай бұрын

how to display the timer that has been set

@marcomachado39 Жыл бұрын

Top d+++

@OnosTech Жыл бұрын

👍👍👍

@shivananda4964 Ай бұрын

How to power 5V DC if i connect to a normal switch?

@JoshuaRotimi 9 ай бұрын

How do you power the relay? I'm seeing 5VDC on the label. I'm not familiar with any 5V batteries. Just 9V, 12V, 1.5V batteries here.

@OnosTech 9 ай бұрын

You can use the 9V or 12V battery directly

@JoshuaRotimi 8 ай бұрын

@@OnosTech Thanks again. I'm at the point of programming but I cant get the board to be programmed. It says upload completed but I'm still seeing the default wifi AI-THINKER_DA400E instead of the set ESP01 RELAY so I can easily tell the programming did not work. The module I have is labelled ESP 01S

@pascalcuzon9411 9 ай бұрын

Très intéressant , dommage que nous ne puissions pas installer le Logiciel FLProg.

@OnosTech 9 ай бұрын

You can download, extract and use the portable version 8.2.1 from the Achieve link below without installing it flprog.ru/en/downloads/distrutives/arhiveversions/arhiv-versij-programmy/

@pvlsvnv Жыл бұрын

hey man, I was wondering how to get in contact, I really like your content and have a couple questions and proposals. thanks!

@OnosTech Жыл бұрын

onos.technology@gmail.com

@amitdhiman4430 2 ай бұрын

Hi, Thanks for the valuable information. I have a query if you can provide information on this. I have learnt the mobile application development too using React Native. I want to create my own app to control this relay module. .How can I do that. Can you help me in this? Thanks a ton in advance.

@amitdhiman4430 2 ай бұрын

@OnosTech

@OnosTech 2 ай бұрын

Check Tutorials of MIT app inventor on KZfaq.

@DIYchannel2K3 Жыл бұрын

Hi everyone, when power on, relay is close although I set the output connecting relay Low level. Somebody tell me why and how to fix it

@OnosTech Жыл бұрын

Check the FLProg program download link in the description, I have updated it.

@immortal6131 Жыл бұрын

Hello, thanks a lot for this great tutorial, can you please send us the final code after the FL prog part

@OnosTech Жыл бұрын

In the description

@kareembaigmohammed7136 Жыл бұрын

sir a small doubt do we need bootloader for esp-01

@OnosTech Жыл бұрын

@ahmedlz9495 2 ай бұрын

so does this works only if connected to the same wifi or does it also work from anywhere ????

@OnosTech 2 ай бұрын

This one will work only when connected to WiFi. To make it work anywhere, you need to select the cloud option in remotely.com. See how it is done in this video: kzfaq.info/get/bejne/eduKodeeldK2eXU.html

@omarenabi6850 12 күн бұрын

Can I set the delay for 12 Hours ?!

@roevejosuahgacias1093 7 ай бұрын

what library are you using for esp8266wifi.h

@OnosTech 7 ай бұрын

It comes with FLProg installed

@abrahamthomas4136 6 ай бұрын

uploaded the code to my esp8266 01 and the access point not visible on mobile .so i cannot connect . i use 8.2.3 version of flprog

@OnosTech 6 ай бұрын

I am currently using the more stable version 8.2.1: flprog.ru/en/downloads/distrutives/arhiveversions/arhiv-versij-programmy/

@abrahamthomas4136 6 ай бұрын

i got it- thanks

@ukwamatthew570 Ай бұрын

Pls sir, i have done the remotexy , but i dont understand the flprog area?? How can i program the flprog i cant locate it on my system?

@OnosTech Ай бұрын

See playlist on FLProg Tutorial

@Joemama-km9np 8 ай бұрын

Man, I bought a 5 pack of these and the relay modules but I'm having a hard time trying to see how a plug in wifi adapter is not just easier?

@OnosTech 8 ай бұрын

I don't understand what you mean by that. Do you want to connect all 5 to a wifi hotspot?

@hanseich 7 ай бұрын

It might be easier, but it likely limits you to a narrow purpose. These relays with esp01 can be integrated into all kinds of things. I can think of: remote starting a sauna, remote start heater in car, etc. so many interesting custom applications for pennies

@GordonWilson67 10 ай бұрын

I just tried this project but when trying to upload I get the error message: "Compilation error: flprogUtilites.h: No such file or directory" ? Any help would be appreciated. -Gordon

@OnosTech 10 ай бұрын

What version FLProg did you use? Did you download the portable version or the installer? My recommendation is to download and extract the portable version of 8.2.1 from the archive link: flprog.ru/en/downloads/distrutives/arhiveversions/arhiv-versij-programmy/ Just double-click on the application icon in the extracted files folder to open FLProg.

@GordonWilson67 10 ай бұрын

Thank you for the help. I downloaded the version that you recommended above and it works now! Before I used the FLProg installer 8.2.2 version and that is when I got the: "Compilation error: flprogUtilites.h: No such file or directory" @@OnosTech

@roquefuentes9580 Жыл бұрын

Can we switch ON OFF when away from home. Thanks

@OnosTech Жыл бұрын

You can configure the remotexy cloud server to do that. See this video example kzfaq.info/get/bejne/eduKodeeldK2eXU.html

@agungsaputra6626 Жыл бұрын

sorry, bro, I want to ask, I want to make 2 buttons, but the button can only be pressed 1 of the 2 buttons, how about old coding, bro?

@OnosTech Жыл бұрын

I am sorry, your request is not clear to me

@T.STRINGS 11 ай бұрын

sir Do you have a group chat on this this..

@OnosTech 8 ай бұрын

t.me/Onos_Tech

@kareembaigmohammed7136 Жыл бұрын

hi sir can we connect es8266 to cloud server

@OnosTech Жыл бұрын

Yes, you can.

@kareembaigmohammed7136 Жыл бұрын

Thanks sir 👍

@kokogyi5905 Жыл бұрын

Please, where can download Arduino code?

@xuanbinh8791 3 ай бұрын

Link dưới video

@kareembaigmohammed7136 Жыл бұрын

hi sir,is it necessary to assign IP address

@OnosTech Жыл бұрын

Yes, it is or you can enable Assign DHCP to automatically do that.

@IngVasiu Жыл бұрын

The relay module is good but the board is just shit. It gives a pulse high during booting, regardless of the way we program it. Which is not good for some applications.

@OnosTech 10 ай бұрын

Agreed

@alexjames6747 2 күн бұрын

What language do you speak?

@chonlavitj 23 күн бұрын

Please help me in the ardunio program show at below. How can I slove this problem? Thank you . Variables and constants in RAM (global, static), used 28600 / 80192 bytes (35%) ║ SEGMENT BYTES DESCRIPTION ╠══ DATA 1536 initialized variables ╠══ RODATA 736 constants ╚══ BSS 26328 zeroed variables . Instruction RAM (IRAM_ATTR, ICACHE_RAM_ATTR), used 59575 / 65536 bytes (90%) ║ SEGMENT BYTES DESCRIPTION ╠══ ICACHE 32768 reserved space for flash instruction cache ╚══ IRAM 26807 code in IRAM . Code in flash (default, ICACHE_FLASH_ATTR), used 250148 / 1048576 bytes (23%) ║ SEGMENT BYTES DESCRIPTION ╚══ IROM 250148 code in flash esptool.py v3.0 Serial port COM3 Connecting........_____....._____....._____....._____....._____....._____.....____ A fatal esptool.py error occurred: Failed to connect to ESP8266: Timed out waiting for packet header_