Lifesaver bud. Really appreciate you. Straight forward without a lot of talk, talk , talk. Once I followed every step (helps to have video with you) it worked great. Great job and saved me a trip.
@usmcgabeaguilar2 жыл бұрын
My wife just surprised me with a 93 bronco for Christmas and had this system installed but not paired this video was excellent thank you
@IzzieKarshem2 жыл бұрын
Thank you. Have had this system for about 8 years and finally a talk through that works.
@Nick636_2 жыл бұрын
Did it reset any settings??
@SKATETOSLAYER3 жыл бұрын
This worked for me and I’m stoked. Accidentally unpaired mine wondering what the other buttons do lol, as the fob came with the car when I bought it so I had no idea. Found the vid was a bit too slow to follow along for the pairing process so I ended up just writing it down and following from that, worked like a charm. Love that there's always an answer for everything on youtube. Thank you. 🙏🏻
@Nick636_2 жыл бұрын
Did it reset any settings
@SKATETOSLAYER2 жыл бұрын
@@Nick636_ Not for me, no
@travispeoples2 жыл бұрын
Thank you so much! I recently purchased a replacement remote for my viper alarm and the instructions didn't work. I then called their tech support hot line and they couldn't get it to work. So, the tech tells me I have the wrong model remote, go to an authorized viper dealer to get it programmed. They were missing the first step in turning the l.e.d off before entering the pairing mode.... you saved me a ton of time and headache for something that has already caused me a lot of grief. Thank you again.
@724MX8 ай бұрын
Thanks a million.... best instructions I have seen on KZfaq in awhile. If anyone is trying to follow the manual it almost works however I had to have my door shut on my vehicle where the manual tells you to have it open.
@denisec72506 ай бұрын
❤ I know this video is older, but it's the only instructions that worked. You rock!! 😊 TY!!!!
@kkutube19724 жыл бұрын
Thanks bro, mine stop working. They told me that I had to bring it in and I asked them if there are steps to repairing the remote. Well, you save me from a long drive and wait. New sub. Thanks
@thatelectritian3 ай бұрын
Other videos didn't explain it as well as you and I was able to get mine paired, thanks a lot ❤
@josemopar7082 жыл бұрын
After 2 years and still help people. Thank you save me $45 just program this control plus $50 of the control. I just bought the control on Amazon and followed you steps and all good. Thank you.
@MrBigpoe4 жыл бұрын
just watched your video and reprogrammed my friends viper that has not worked for a week , so thanks brother for your help it works like a charm now
@ddhs52304 жыл бұрын
Thanks. You made it super easy compared to the instructions that came with it!
@ivstova473 жыл бұрын
Thank you sooooo much.... it worked the first time.....I was lost without my alarm for weeks, and i was about to go back to shop and waste money, then i thought, go on KZfaq...... Thanks
@friedrice82963 жыл бұрын
thanks! saved me time to go back to the guys who installed my remote start.
@g.h.2344 Жыл бұрын
MY GUY THIS SAVED ME A TRIP TO MY RUDE ASS ALARM INSTALLATION GUY MC FLY. 😎 YOU KEEP US INFORMED. 👍🏾👍🏾🔥💯
@mikelowe58234 жыл бұрын
What if you don't have a function button?
@kreese382 жыл бұрын
See my comment
@dragac902 жыл бұрын
@@kreese38 where is it ?
@kreese382 жыл бұрын
@@dragac90 call 800 number on back of remote they will give you recording telling you exactly what to do to re- pair remote
@1Hope4All Жыл бұрын
Are you sure it doesn't have a function button?
@roycampos319511 ай бұрын
Mine doesn't either
@bigd8252 ай бұрын
Thank you. You made it so easy.
@melissamorris3998 ай бұрын
Best instructions I found. Thank you!
@tymb2782 жыл бұрын
Worked great. Thanks much for the brief to-the-point video instructions!
@gunnardotson58223 жыл бұрын
Dude thanks so much! I bought the same 2-way remote and had it paired in less than a minute on my own. Heck yeah!
@shyrezee945810 ай бұрын
Your video is the only one that actually works🎉🎉❤
@saliino8067 Жыл бұрын
Only video that actually worked! Viper 7146V
@JoseDiaz-rm3hy3 жыл бұрын
Video is super clutch! Explained exactly in detail how to do it. Thank you
@fullcontakt12 жыл бұрын
Thank you so much! It worked!!! Those bastards at custom sounds are rude as helll
@javiermelo1072 ай бұрын
Lifesaver good video thank you
@UKtoMakka11 ай бұрын
Thank you very much for video, but I need help if you can please explain how to delay start time because I installed in diesel car so as you diesel cars won't start in cold weather straight away.
@sonemikaele1662 Жыл бұрын
Best video you have save me time and money❤❤❤
@jaleilcroskey4 ай бұрын
You’re a wizard thanx
@marcofranco57 Жыл бұрын
Does this work for the viper fob to the right in your video ?
@eipaul042 жыл бұрын
It solved my problem! Paired both my remote key. Thanks for the vid, very helpful!
@user-sb6qe4lz6k2 жыл бұрын
John great 👍🏾 video it works every time
@dal4442 жыл бұрын
John hat about the other remote - 7656V? Mine seems to stick in valet mode.
@MrDonny6085 Жыл бұрын
Thank you, you saved me $100s of dollars
@noeld9910 Жыл бұрын
Great video thank you. Took me about 2 minutes.
@ismailfassifihri69492 жыл бұрын
Thanks a lot man !! I just saved 40$ minimum, thanks to you !!!!!
@jakemcmanigle28852 жыл бұрын
This for this video worked flawlessly!!
@jordantawyea79122 жыл бұрын
What if you follow all the steps exactly but instead of it pairing the red light flashes and buzzes?
@jfGarage4k4 жыл бұрын
Question i have 2 viper remotes i need to program another viper remote (total of 3 fobs) is this capable to have 3 remote in the system?
@rudyarias41022 жыл бұрын
Hi great video. I have the Viper 7652v I changed the battery and now I can’t program. I’ve tried different videos plus yours with no success and all I did was change the battery.
@bigd8252 жыл бұрын
Thank you. This made it so much easier.
@greekmaster10017 ай бұрын
for some reason every time I hit the lock or unlock button, it doesn’t make a sound like it always does on the truck it used to beep once when you lock it and twice when you unlock it or the opposite and.bow it doesn't do that anymore is there anyway to program it where it can make a beeping sound when the truck locks or unlocks
@eddiprosper4347 Жыл бұрын
Why are the guys at the auto Car Alarm installing place so mean? Is there a law that says they have to be mean?
@mr2cqql7 ай бұрын
Do I have to pair all the remotes or just the new remote?
@codyingenthron2932 Жыл бұрын
THANK YOU SO MUCH. IDK HOW I UNPAIRED MINE BUT I COULDNT FIGURE OUT HOW TO REPAIR IT
@hardr0cker645 ай бұрын
Idk if you or anyone can answer this for my question but anything could help. My two key fobs no longer work,I cannot find the “valet” button, and am looking to replace it. Could I buy a new key fob, replace the antenna with a valet button, and program the new key fob to my pick up?
@Evil-Jesus Жыл бұрын
On that antenna what are the other programming options? When you hold the button down on the 3rd press and hold, what does that do and so on?
@timothygarcia70683 жыл бұрын
Found this video lifesaver
@seancain7331 Жыл бұрын
You are a great teacher thanks for your Time
@bee2rad18 ай бұрын
Blue light on my device is not blinking so I skipped that 1st extra step. After ignition start I cannot get the blue antenna light to flash, any suggestions? My car is a 2016 Lexus hybrid. Thanks
@nguyenluon67783 жыл бұрын
Thank you bro my blinking has been fixed thank your video
@marcchislett443 Жыл бұрын
I have the signal receiver in the middle. When I got the button once the light go solid blue, when I try to hit it again and hold it to enter pairing the lights don't start flashing they just stay blue. I've tried with the door open and the key in every position. Any help?
@jaredmalterer59254 ай бұрын
How do you program the xr plus? It has no button on the receiver
@Shadow-313 жыл бұрын
Thank you, you are a lifesaver! 👍🏻
@tukuss Жыл бұрын
Great video. Can I please ask on how to change remote model 7945V color display unit so that I need to press start button twice to start car not once ? I can`t tell you how many time I have pressed start button when in packet and car would run. Thank you for help
@bananafuzzy72916 ай бұрын
Is there a video For the control center next to it
@Brews_By_JD Жыл бұрын
Bro you saved my life
@donhaffner7843 Жыл бұрын
did this worked great, but the blue light doe's not come on any more . ?
@paulmartino5991 Жыл бұрын
Recently had to jumpstart my car and now whenever I unlock my car the horn honks. Is there a setting within the key fob that I can disable this?
@Kmnnee9 ай бұрын
I successfully paired the remote, but it’s only receiving and not sending. Any advice?
@OmarLopez-vt9gt2 жыл бұрын
Awesome video ! Thank you buddy !! Worked great for me
@scottymont44389 ай бұрын
I realize this video was produced years ago, but I'm hoping you can give me an answer to my Viper issue. The Control/Valet LED light does not flash when I press on it. I have the Viper DS4+ system and the Viper 7857v remote. Any help would be greatly appreciated.
@kyat2006012 жыл бұрын
My question is can I ship my ds4 to you to be programmed?
@jesusgutierrez69264 жыл бұрын
What if I don’t have a function button
@yngone1 Жыл бұрын
Not on my remote but on the other device my Blue light WONT blink and I think it os effecting the pairing process
@MegaJhgb3 жыл бұрын
Hi, I have the viper 7146v but not sure how to program it. This came with the car that I bought so I don’t have an instruction manuel. Can you help?
@jesusmota36982 жыл бұрын
How did you end up programming it?
@christopherfoulk9931 Жыл бұрын
So had the viper system installed by a dealer on my 2018 dodge when I hit start it unlocks door and starts pre heat for diesel for 10sec then locks doors and start run for 20sec then shuts off
@Mindrage100 Жыл бұрын
Thank you made it very easy
@patrickgilchrist17889 ай бұрын
Is the AUX the function button?
@lisandrozamora733911 ай бұрын
I've been trying to find any video that can help but no luck. My key fob was unpaired and when I repaired it, only my lock button worked and acted as both a lock and unlock. I went out of my way to buy another key fob and I had the same issue arise. What can I do or what steps are next?
@callal0u5 ай бұрын
You have 3 different type, I wished you would have done the one to the right of what you had. That's the one that I have, the instructions did not work. My Fob, does not have a function button, but an AUX button. So, I am guess there is another method for this type.
@scottymont44389 ай бұрын
Hello. I'm hoping that you will respond to my previous message. The Control Center blue LED light doesn't blink. I unplugged it, pushed the button and the blue LED light turns solid blue. I don't have the alarm system. Maybe that has something to do with it. I've been trying to contact Best Buy but they don't return my calls. Any help would be greatly appreciated.
@GeoNetJet Жыл бұрын
So I already had my remote start installed. Took it to dealer and noticed that dealer accidentally ripped of bottom connectors to wires. Plug them back on and on my 2019 ram push start would not unlock, run/start truck. Would this work if reprogrammed viper remote?
@rcboathandbook77092 жыл бұрын
That's the best looking antenna for Viper I've seen. I have the finger looking one and would love to switch to the dual blue LED unit. Whats the model number?
@cr999752 жыл бұрын
It worked for me. Thank you for the information.
@Jennifer-zy1fc Жыл бұрын
Thank you so much!!!! So easy!! Thank you!!
@kudakuda55 Жыл бұрын
HI, I followed the steps but did not work for me. When did you turn the ignition off the second time ? I left it on all the time after the first time turning it off. I would appreciate your help.
@musicfinder31782 жыл бұрын
This worked for me, thank you very much
@marciaj.19513 ай бұрын
I am trying to restart the car alarm. My blue light is solid when I turn off my car. When try to follow your instructions. I turn on the car the solid light turns off.
@mikemiceli8574 Жыл бұрын
Very helpful - thanks!
@DavidsHowtosReviews Жыл бұрын
Your the man!! Thank you!
@juanc222223 жыл бұрын
Life saver!! You are the man!
@septimiu20072 жыл бұрын
What wires are you connecting for a banch test I power the unit but the remote failed to pair
@1Hope4All Жыл бұрын
On my 7857V, the top orange light is constantly on, and the bottom AUX green light keeps flashing. How do I fix that so that there are no lights on and it functions properly? My daughter tried re-programing the remote, to no avail. She started the engine instead of just turning the key to ignite. After she got back inside, it started flashing! 😫
@eazyboy2 Жыл бұрын
are the same steps for a ONE WAY REMOTE ?
@808DC2R2 жыл бұрын
I have a problem with my viper alarm system. I have a 7756 model. My battery died on my remote and lost all its functions until I recharged it. It said pair mode but when I was in the house. I recently did the pair button and it don’t even blink. I can’t get my antenna to blink and pair with my remote
@cruzgarcia69543 жыл бұрын
Thank you so much you are awesome, appreciate your video!!
@geneblog3 жыл бұрын
Hi there just bought a car with the receiver hat you have on top... can you please tell me what kind of remote that is? Thank you
@sergiorodriguez89704 жыл бұрын
Hi I was wondering if you know where I can get info on programming a older silencer remote start two way alarm thanks
@Cristianman172 жыл бұрын
So I have a 7856v remote and tried to program it but now the antenna light stays blue all the time when locking and unlocking the car and remote start won’t work how to fix? Thanks
@jeffreyramos287 Жыл бұрын
Can you program/adjust the start-up/ ignition time?
@jeremyp.27312 жыл бұрын
Hi mine is not blinking blue. My key is working, but the cold start is not. Pls help me what would you suggest?
@larryb9511 ай бұрын
Mine dosent have a function button on the side. Only the aux button...ive tried the push and hold 8th time on my antenna near my mirror nothing. And cant find anything online video wise. Kinda stumped
@aleluya7m6 ай бұрын
Anyone knows why my blue light is not blinking? I have the one to the left on the video. So I can’t get it to pair.
@zackyzack37942 жыл бұрын
I’ve a question, my eld got a blue light blinking, when I tried the ignition button the blinking lights disappeared and when I switched off the ignition the blinking light came on, how do I stop the blinking light please. Remote is 7153V
@toddforslund3571 Жыл бұрын
Any tips for 2 button ones for remote starts on vipers
@marlondixon33793 жыл бұрын
Is an automate alarm transmitter 7142 a following the Same program feature
@hilow41252 жыл бұрын
I have a problem where my control center led does not blink to show the system has armed. I recently changed the main battery of my car and that's when the problem started.
@robertmoreira97012 жыл бұрын
how do you program the remote on the table with the transmitter on the left
@digitalbilly Жыл бұрын
hey great video i have 5904v viper alarm remote start can I use a 7857v remote on my system?
@Therey18982 жыл бұрын
How about if i just want to add this exact remote to my alarm system??