How to program your garage door remote and keypad (Liftmaster, Chamberlain and other manufacturers).
To program your remote:
1. Press & release the “learn or smart” button on the back of your garage door opener. The learn indicator light will glow steadily for 30 seconds.
2. WITHIN 30 seconds, press & hold the button on your hand-held remote.
3. Release the button when the motor unit light blinks. It has “learned” the code. If the light bulbs are not installed 2 clicks will be heard.
To program your keypad:
1. Press & release the “learn” button on your garage door opener. The learn indicator light will glow steadily for 30 seconds.
2. WITHIN 30 seconds, enter a four digit code of your choice on the keyless entry. Then press & hold the ENTER button.
3. Release the button when the garage door opener lights blink. If no light bulbs are installed 2 clicks will be heard. Your code has been accepted.
Mount Garage Doors, Inc.
Westminster, MD 21157.
Tel: (410) 549-2668
Toll Free: 1-877-MT-DOORS (1-877-683 6677)
Fax: (410) 549-4229
www.MountGarageDoors.com
Serving Carroll, Frederick, Howard and Baltimore Counties.
Commercial -- Residential -- Gate Openers -- Service & Repair
3 Year Labor Warranties
MHIC #51659
The information and advice published or made available here is not intended to replace the services of a professional. The
guidance offered is provided for informational purposes only and is not a substitute for professional advice. You should not use this information for identifying or solving a serious problem. Any action on your part in response to the information provided here is at your own discretion. We make no representations or warranties with respect to any information offered or provided regarding any solution to a home issue. By using this content, you agree that Mount Garage Doors, Inc is not liable for any resulting direct or indirect claim, loss or damage. In the case of a home emergency, please immediately call a professional.