How To Properly Time and Install Timing Chains on a TSI Engine

Рет қаралды 1,246,132

4 жыл бұрын

Timing chain failure is very common on 2.0t TSI engines. Both VW and Audi have both timing chain tensioner failure, and timing chain wear or stretch. In this video we will cover how to replace a timing chain on TSI engines, how to properly time a TSI/TFSI engine, how to time the TSI balance shaft chain, the timing chain tools you will need, and more.
Cylinder head replacement kit ~ bit.ly/2AKqCB5
Timing chain replacement kit ~ bit.ly/3bPzPVG
Timing chain tool kit ~ bit.ly/2AQfqmx
Written article for TSI timing ~ bit.ly/2WUETUE
VW Repair Manual ~ bit.ly/2Xkp9t0
Audi Repair Manual ~ audi.us/2TuMuHr
~~~~ Support the Show ~~~~
Become A CrewMember ~ goo.gl/D7eROI
Patreon ~ www.patreon.com/user?u=4243029
Shop Amazon ~ amzn.to/2FQErAm
Audio ONLY Podcasts ~ goo.gl/5XcZxB
~~~~ Recommended Tools ~~~~
Impact driver ~ amzn.to/2HsxS2H
Small Impact driver ~ amzn.to/2DZdsMN
Electric ratchet ~ amzn.to/2FydxMS
Magnetic tray ~ amzn.to/2FEpQ6g
Basic hand tools ~ amzn.to/2GnjF7K
Box wrench set ~ amzn.to/2FzoJch
ScrewDriver set ~ amzn.to/2FEjcgd
Shop towels ~ amzn.to/2FC7UgM
Allen Sockets ~ amzn.to/2GlcnAz
Torx Sockets ~ amzn.to/2pL0SfL
~~~~ Playlists ~~~~
Humble Mechanic Podcasts ~ • The Humble Mechanic Po...
Project White Wookie ~ • MK3 VR6 GTI Project Car
Failed VW parts videos ~ • How VW Parts Fail
Tool and Product Reviews ~ • Tool and Product Reviews
How To videos ~ • How To Fix Your Car
MK1 VR6 Swap Videos ~ • VR6 Engine Swap MK1 Ca...
~~~~ Be sure to follow me at ~~~~
humblemechanic.com
INSTAGRAM ~ / humblemechanic
FACEBOOK ~ / humblemechanic
TWITTER ~ / humblemechanic
Amazon Store ~ www.amazon.com/shop/humblemec...
Disclimer:
The content of this video is available for informational and educational purposes only. It is not intended to be a substitute for the professional advice of a mechanic who has personally inspected your vehicle, nor does it create a relationship of any kind between the Humble Mechanic and you. Every situation may be different, and the Humble Mechanic does not make any warranties, whether express or implied, as to the accuracy, fitness, or applicability of the information or automotive parts portrayed in this video to any project and makes no guarantee of results. The Humble Mechanic and any sponsors of this video will not be liable for any damages related to personal injury, property damage or loss of any kind that may result from the use or reliance on this video and/or any automotive parts represented in this video. You are using the information and automotive parts portrayed in this video solely at your own risk.

Пікірлер: 778

@AwesomeElite122 7 ай бұрын

This video was instrumental in helping me get my timing chains replaced 100% correctly on my 2.0 tsi engine. I'm so very grateful that I bought this car. With this engine. Because it introduced me to your channel Charles. Your an awesome mechanic I just did this job on my gen 1 2.0 tsi CCTA engine with 145k miles, engine live data channel 93 intake cam adjustment was at -5.4, after the replacement of all the chains, guides, & and updated timing chain tensioner. channel 93 shows -1.02 degrees of adjustment and the engine runs smoother for sure. I worked on this job for 21 hours non stop. From 9am Thursday to 6am Friday. If it cost me 1k in labor then my time spent working on this was ~20 dollars an hour. So if you make less than that consider DIY it's worth it. This was a life changing experience guys. While I was working on it, the timing slipped on me and I started panic, but then I collected my self. watched this video over and over, read my factory manual and torqued my heart out. I have driven the car around town, and it runs great. Really really great. I am so glad that I didn't destroy my engine. I am so happy 21 hours of my life didn't go to waste. I'm really eager to see how the pistons rings and cylinder walls will hold up as I drag this thing into 200k miles. Getting to work on engines for the first time has been really cool. But I wouldn't have even attempted this if I couldn't find good resources about the job online. Thank you so much Charles

@bobbystronghands9172 4 ай бұрын

Care to lend a hand? I have to do mine soon as well. Gearing up

@AwesomeElite122 4 ай бұрын

@@bobbystronghands9172 Maybe. I'd hate to be responsible for any mishaps. I worked 21 hours non stop in my driveway, I would definitely have rather done the work in the garage.

@Tehsheeeep 4 жыл бұрын

Just wow dude, you make a very daunting task to someone new to this look actually quite simple. You are an excellent teacher I must say.

@pudermcgavin4462 4 жыл бұрын

I was always scared of chains but I'd do them all day long over a belt system now lol

@lynxstarautomotive208 3 жыл бұрын

Puder McGavin The worst timing job I ever did was a 3.0TT in a 3000GT. After that one, there was no such thing as a hard engine to time.

@nicholasbrown6481 3 жыл бұрын

These are easy. Buy the camshaft holding tool

@alexgonzales18 3 жыл бұрын

If a 3000gt is the hardest timing job you haven't done many bmw or audis. I have a vr4 and it was way easier then this. I also did a timing job on a v10 bmw so maybe I'm just using that as a comparison lmao

@christophermarshall5765 3 жыл бұрын

@@nicholasbrown6481 I've got the kit for the 1.4 litre VW engine, & it will do others. I agree on buying the right tools, like he used in this video. The kit I got cost me $400!! The kit is worth having. We most likely have seen lots of easy to do jobs ruined by lack of suitable tools.

@gabrielrivera8131 2 жыл бұрын

I've used this video about six times now on several different jobs as a good reference to make sure I'm doing it right and don't miss anything. Absolute lifesaver. ❤️ -self employed mechanic

@CrouchyM 4 жыл бұрын

This upload came at perfect timing, just had a 2011 A5 come into work with a timing failure and no compression. Just got the head off yesterday ready for rebuild, measured between the cam marks at just over 150MM and the inlet mark was between links. So obviously I’ll be replacing all the chain so this video was extremely helpful and saved me having to read the manual, it’s much easier visually seeing the process. Thanks 👍🏻

@manicr1 3 ай бұрын

Thank you for this video. I'm in the process of a total overhaul on my GTI and I was very concerned I wouldn't get this part right. Watching this video, I gained a better understanding and yesterday, I got this knocked out without issue and MUCH quicker than I thought I would. Again, I appreciate your content!

@climax_6629 4 жыл бұрын

You make everything look so simple. Everything was explained with such amazing detail. Thank you so much! Keep up the amazing work.

@pathfindero2072 3 жыл бұрын

I do not understand wtf it is on some people's mind when giving dislike. You present and prepare all so good and explicit :links, tips&tricks... etc I like and apreciate very much your work. Thumbs up!

@ArchuletaAuto 5 ай бұрын

I watched a few of these how to videos but not until I watched yours did I understand how everything works and gave me the confidence to do timing and balance shaft chain. Thank you. Came out and runs perfectly.

@joshuabaker8919 Жыл бұрын

Looking to build my own tsi from the ground up, timing was one of the things I am looking forward to learning the most aswell as the entire build process, great guide!

@brucebrown4183 2 жыл бұрын

Hey Charles thanx for the you tube classroom. I've been doing this stuff 50 years and you taught me a bunch. Another success!

@HumbleMechanic 2 жыл бұрын

Thanks so much

@streetrider1987 4 жыл бұрын

Best video instructions about VW TSI engine timing. Thank you for teaching!!!!

@melias67 3 жыл бұрын

Thanks for this. I am a fourth year mechanic that has been almost left stranded in the current shop I’m in, hardly anyone who has the know how or cares to help me. Thanks for this video as a guideline. I have one that needs the rocker/camshaft cover resealed.

@leedits5495 4 жыл бұрын

Just a follow up i changed everything just like you did on my 2012 Golf Gti Mk6, done more than 3000km and everything sounds perfect. Thanks for the video!

@chrisgartner7009 5 ай бұрын

One of the best explanations, no fluff just exactly what is needed to get the job done! Great job

@HumbleMechanic 5 ай бұрын

Thank you. Glad it helped

@PULSARGT 3 жыл бұрын

I followed your video step by step and I got my car working thank you very much for this detailed video.

@robinwas-miles9686 Жыл бұрын

So many markers! Clarity and detail 100%. Easy to see why such repairs are seriously expensive.

@mazpr2025 Жыл бұрын

Having all the special tools is a must. Cleaning the old gasket sealant is a pain, takes forever, falls everywhere. It looks easy with the engine out, but man there is an engine mount bridge in front of the timing cover/chain, that is a hassle to remove those three bolts with triple squares.

@sylvainst-laurent3631 6 ай бұрын

That video is probably the best timing tutorial ever . Well done and thank you .

@HotRodDave 3 жыл бұрын

Thanks for making this video. It helped me learn these engines while making a video on a Tiguan that I checked out and repaired a few weeks ago. Great content on this channel.

@Syphious64 3 жыл бұрын

Your video explains a lot and simplifies this job well, Planned on doing this job for a while and stopped driving my A3 when it started making noise on startup. Glad I did cause today I got the lower timing cover off to be met with the early style chain tensioner.. My car was serviced at the dealer until 2019 under the 10yr warranty program by the previous owner, I was surprised to see the early tensioner style hanging out in there at 140kmiles.

@tcap7917 2 жыл бұрын

The hardest part of doing this job is gaining access to it. Helpful video by the way.

@AMtech_Spenny 4 жыл бұрын

My buddy did timing on one of these a few months back, they way he described it sounded very scary/complex lol this video makes it feel quite easy! Won’t be scared to do my MK7 GTI timing once it’s needed! Thanks Charles!

@mbenz3145 2 жыл бұрын

Yeah try doing that while the engine is on the car and you will feel like hell is a nice place to be...

@georgem1574 Жыл бұрын

Thanks for the informative and straightforward timing chain tutorial! Quite helpful for sorting out my A3! Thanks Charles 👍

@georgekoech7510 4 жыл бұрын

Thanks a lot for your very detailed, informative and priceless timing video. Its been so helpful. Cheers. Be so blessed.

@thatguy9171 4 жыл бұрын

Finally =D been waiting a long time for a goods video on this topic

@atrain132 4 жыл бұрын

Same here man.

@rovereddy2431 2 жыл бұрын

This was helpful af got to my Audi A3 last week took it apart and put it back together good stuff man 👌

@NisaOtoServis 4 жыл бұрын

You have a good knowledge of mechanics. Thank you bro Thank you

@sanelb1147 3 жыл бұрын

those videos are so mind relaxing.. even when u haev no idea what the guy is doing,, just watching over and over again it slowly starts to sink in

@joshikothari2691 3 жыл бұрын

Hey buddy Wow that is such great advice, as I am trying to rebuild my sons car engine, which was his passion and jot. Unfortunately he passed away last year due to long term illness. I want to build the engine and car back in his memory, so it is much appreciated the help and guidance you giving us all.

@iangethin5037 2 жыл бұрын

Brilliant video - very clear and thorough explanation, thank you.

@masmrz 3 жыл бұрын

I'm about to tackle the timing chain replacement on my 2010 GTI and this is the best detailed video I've seen so far. Thanks,man.

@videoheap 3 жыл бұрын

How did it go?

@masmrz 3 жыл бұрын

@@videoheapit went well, already put almost 1K miles, no codes,no check engine light thanks for asking.

@mitchellg3893 Жыл бұрын

@@masmrz is it still running good?

@maplefpv 11 ай бұрын

@@mitchellg3893 prob sold the car at this point

@michaelbradshaw2069 3 жыл бұрын

This video was a great help along side the manual I'm more of a visual person and your video made things click better than just reading the manual over and over thanks again 👍

@HumbleMechanic 3 жыл бұрын

Thank you!! That was exactly what I wanted from the video. An aid to the repair manual!

@screamingsvtcobra6220 2 жыл бұрын

YOU SIR ARE AWESOME! I have to do this on my wife’s 14 A4 . This helped a lot

@rickdaley9266 2 жыл бұрын

Thank you so very much for sharing your knowledge and experience with us Charles. I greatly appreciate you.

@jibmaster Жыл бұрын

Super helpful. Thanks dude. About to tackle my stretched chain on my MK6 GTI. This, and the manual, will help.

@ledoJerr 4 жыл бұрын

Great work mate, glad to see all ur videos. Keep going like this ✌️💪

@dc5369 3 жыл бұрын

This video is awesome. For a newbie in the VW TSI world, you made more sense explaining it than any other technician can explain it to me. You make understanding my Gen 3 GLI a lot more easier. Much appreciate the knowledge that you share.

@HumbleMechanic 3 жыл бұрын

Thank you

@enriquealvarez9918 8 ай бұрын

Maestro, soy de Argentina tengo un A4 viejo año 2010 .. tfsi Anduve a 210km por hs . Y luego empezó a tirar humo y como gotas de agua por el escape , por tu experiencia q podría ser ?

@KL-cc6iy 4 жыл бұрын

Thanks for always doing great, in-depth work and showing it. You helped my brother out a lot with his Jetta. I'll be replacing some parts on my CC tomorrow.

@TheRebuilt1 4 жыл бұрын

Makes the MKIV and B5 belt procedure seem remedial. I am glad i bought a Bentley model for my wifes Q3. Great knowledge transfer sire.

@jarrow708 3 жыл бұрын

Thanks for this video. It helped me get me audi back on the road.

@justa_dude 3 жыл бұрын

Thank you again, you made it possible for me to fix the car I purchased. You have detailed instructions. Thank you

@juanjarquin2869 4 жыл бұрын

You make look so simple, great instructions! I would feel confident doing it myself with this video

@_Mario_PL_ 4 жыл бұрын

I feel the same way. Love his work.

@ArminVBThe1 4 жыл бұрын

feel the same way :D. can't wait to phuck up my engine and get that huge dealership bill

@_Mario_PL_ 4 жыл бұрын

@@ArminVBThe1 you got this lol

@zomaardan 4 жыл бұрын

I love your video's. Big fan. Have to swap head gasket of a 2.0 hdi and im nervous as can be. Love your skills sir. Awesome.

@Wishnuful 3 жыл бұрын

Great!!!! Short, nice and clear. Thank you!!

@75IFFY 4 жыл бұрын

Great tutorial. Excellent information and so concise. No fluff and bullshit.

@motormecnet6450 4 жыл бұрын

Thank you so much sir for providing such a great knowledge to us and sharing your experience

@macgyversenah9878 2 жыл бұрын

From Zimbabwe , Africa thanks genius .

@pdpz Жыл бұрын

You are the best buddy. Tanks, my wife learned in this video.

@zackrappleye8553 3 жыл бұрын

successfully timed my car! thanks you so much!!!

@jackappelman7618 3 жыл бұрын

Fantastic video man. Super video instructions about VW TSI engine timing.

@redouanestambouli8320 3 жыл бұрын

That's crazy bro , all this time marks , all this steps, all this chains , it's wonderful to know this things , thx for teaching , God bless you , thx again

@martinvasquenzo3450 4 жыл бұрын

Great informative video....very complete and easy to understand....top notch all the way

@BusWithUs. 10 ай бұрын

Great video! Sure does make more sense than the 40 pages in the factory repair manual!

@n.b.5258 4 жыл бұрын

Thanks so much for this. Replacing a cylinder head soon. I have the workshop manual but this will help a ton!

@HumbleMechanic 4 жыл бұрын

PERFECT!

@patkelly7999 4 жыл бұрын

Great job Charles, a little more involved than pd TDI engine , very well explained:):):)

@syl20bou Жыл бұрын

Extremely good explanation! Thanks!

@ianwilkinson5549 3 жыл бұрын

Best video and explanation ever mate , excellent.

@robertboykin9177 8 ай бұрын

Excellent video, I am looking to do my Fiances timing chain on her VW Tiguan and this was extremely informative and helpful.

@lukechunk4234 3 жыл бұрын

Fantastic video man! Much respect from the UK

@HumbleMechanic 3 жыл бұрын

Thank you!

@enriqueneustaeter1394 Жыл бұрын

So much useful information and great tips !!! Thank you Humble Mechanic!!

@jongikhayasishuba4234 3 жыл бұрын

Thanks Big Man, keep up the good work 👌🏽👌🏽👌🏽

@merintaha 2 жыл бұрын

Hi, brother, it's very clear, fiddly, and I feel confident

@seanh3075 8 ай бұрын

Great video! Not many show the balance shaft timing. Thanks!!

@kelvindiaz6594 3 жыл бұрын

Good Explanation bro clear and simple .

@jeromebuhlmann719 2 жыл бұрын

Thanks a lot for this very fine and complete description

@virtisconsole12 3 жыл бұрын

Wow Charles this was an awesome video I have a few of those TFSi 2.0L motors in A4s and I’m susceptible that I either broke a timing chain or jumped.. it cranks fast and like no compression.. I’m gonna open it up both upper/lower covers and have a looksie.. I feel very confident in putting on all new guides, timing chain and balance chains and even the oil chain and tensioners .. looking fwd to this now .. I was thinking it’s a scary job .. I also like your visual tdc indicator in cylinder 1.. excellent stuff .. really enjoy your content 👍🏻

@kingleo188 4 жыл бұрын

Amazing...you make it look so simple....

@NisaOtoServis 4 жыл бұрын

It was a very nice video, brother, you told me very well. Thank you very much.

@kylestenger15 2 ай бұрын

Hey Charles, love the video man. Nice to see it outside the chassis

@RobertHenry-if9um Ай бұрын

I just did a timing chain on my daughter's vw tiguan. This video helped a lot. I wouldn't do the job without the shop manual ( I downloaded mine). It's a tedious job, but as long as you double and triple check your timing before you button it up, you'll be good.

@ebuks4ever 3 жыл бұрын

You've won a new subscriber. Thank you for making it look so simple. Do you have a video for a timing on Toyota car?

@saiedabushadi4012 3 жыл бұрын

Thanks for making this very informative video

@casperakoma7273 3 жыл бұрын

Thats a good one, well explained many thanks.

@PaulKamdambo 3 ай бұрын

This is Paul a mechanic from Africa Malawi it's nice keep on teaching us

@roygutierrez8428 Жыл бұрын

This is the person that left my comment about 180degrees off of the camshaft Thanks anyway I was able to get it Timed Roy

@aminkhan736 Ай бұрын

thank you so much for this video, i did my own timing chain and this helped alot

@zeljkojovic1989 2 ай бұрын

thanks a lot bro, you helped me a lot. Service successfully completed, thanks again.

@justa_dude 3 жыл бұрын

Super helpful video. Thank you

@ismarmeskovic 3 жыл бұрын

Awesome video as always!!!!

@labradormcgraw 4 жыл бұрын

Fantastic tuition video. Assuming you follow this guide to the letter, you'll have no problems.

@donbrashsux 4 жыл бұрын

This is the best vid covering all the aspects..excellent

@HumbleMechanic 4 жыл бұрын

Thank you

@Kinghavs 4 жыл бұрын

Thank you for teaching

@CarAddict2002 2 жыл бұрын

I got into mechanics recently and don't got a lot of experience. All i can say is thanks dude. I'm still a 19yo in the beginning of his learning maybe won't do this rn cz i don't have access to a garage yet but at least now i understand the process of timing. KZfaq really makes me learn more than what university did this first year.

@Brad-k 4 жыл бұрын

OMG Charles. this looks like a nightmare! I love the Chevy small block and the simplicity of setting the timing chain... I love your videos and HS this look cumbersome to say the least! Thanks again for the amazing video and thank you again for the time taken to show us the procedger in this!

@HumbleMechanic 4 жыл бұрын

Thanks so much. IT actually looks harder than it really is. Once you do it, it makes sense

@supersabrosinho 2 жыл бұрын

If you think this is hard, try Northstar V8s

@zoticus1 2 жыл бұрын

Gm high feature 3.5 is also ridiculous, it's got 3 chains lol

@asmautollc 4 жыл бұрын

Great video concept and even better execution.

@johnpetersen8116 Жыл бұрын

Fantastic companion to the repair manual! ( you did mention using the repair manual, right?) 😉 thanks for walking us through this. With the motor in the car. This stuff is very hard to see!

@stefankassbohrer2765 2 жыл бұрын

Well explained ! Have to do this at my 1.8 TSI Passat, too. Best regards from south Germany

@simonwall5784 7 ай бұрын

This helped me a lot, thanks so much. Had to replace my balance shafts and timing and had never even done timing before but made it happen.

@HumbleMechanic 7 ай бұрын

Awesome.

@stefanos2574 4 жыл бұрын

wow very so much cool to share all this knowledge and info!!good job !

@sirjeepzalott13 2 жыл бұрын

THANK YOU SO MUCH, THIS WAS A FUN JOB FOR ME AT WORK!

@cydls688fatech7 3 жыл бұрын

Thank you very much for your clear details explanation,, 👍👍👍

@gregm.6945 3 жыл бұрын

great video, thanks Charles !

@99Isopropyl 4 жыл бұрын

If you ever made one about timing 1.9L and 2.0L TDIs it would be incredible. There's nothing on youtube that really explains stuff like you do for the hobby mechanic.

@HumbleMechanic 4 жыл бұрын

I haven’t. I’d like to get my hands on a TDI at some point

@jonathanbywater2063 3 жыл бұрын

Superb, thank you. You've taken the stress out of it.

@HumbleMechanic 3 жыл бұрын

Thanks

@joshuam7552 4 жыл бұрын

Thank you, Charles!

@BelungKak85 3 жыл бұрын

The Doctor Engine Mechanic thanks you sir

@brewster1233 3 жыл бұрын

Charles is absolutely right about taking your time and following the shop manual. Set the beer aside for later. Be rested and alert. Do it in stages if you can. Tearing it down only took me a few hours. Then I stopped and read about it again and again. As it is I did a full timing set on my B8 A4 as "maintenance" last fall before the old tensioner coughed. Guides, bolts, chains, balance shafts, gears, cover, timing bridge. Yes I plan to keep the car. It's not really a hard job but you need to be alert. If you lose timing or forget to torque something down bad things can happen in a hurry. And the fact that the timing marks don't line up after rotating the engine one or two revolutions threw me until I read about it. An Audi engineering paper stated something like 164 revolutions. Crazy. I bet you I checked those marks 10x :). Good luck!

@eflanagan1921 2 жыл бұрын

Nice that you emphasize FSM !

@MrSuarezmichael Жыл бұрын

Best video on the net for this job 👏 👌

@jordanyesiaz4125 2 жыл бұрын

Thanks So much Professional Video 👌🏼 you make it Easy for me 🙏🏼

@Ozzaphellah 4 жыл бұрын

Nice. Video just in time. I’m getting my cylinder head redone with new valves and valve seals so I will be rebuilding my top head. Along with everything brand new. Thank you for this video.

@Ozzaphellah 4 жыл бұрын

I have 1 last question. I’m putting my head together now. Does the metal gasket between the crank block and cylinder head take any of that black silicone? Or I just make sure everything is clean lay the gasket and torque the head down to 40Nm?

@videoheap 3 жыл бұрын

@@Ozzaphellah just the metal gasket