How to Punch Down a Network Ethernet Patch Panel

Рет қаралды 1,051,452

Күн бұрын

www.discount-low-voltage.com/P...
I give you a run down on what tools you need, how to strip cable, how to wire the panel, how to punch down the panel.
This same process is used for Cat5e, Cat6 and Cat6A cable. Remember to follow your color code. The same goes when your wiring your keystone jack.
#howto #PatchPanel #Cat5e
Follow our Blog at discountlowvoltage.blogspot.co...
Follow us on Facebook / discountlowvoltage
Follow us on Twitter at / disclowvoltage

Пікірлер: 219

@LK-pc4sq 9 жыл бұрын

Interesting how he is terminating with the cable on the outside of the 110. I have always installed the cable between the termination rows.

@verybang 9 жыл бұрын

same lel

@amarrio1278 9 жыл бұрын

I would think it was obvious that he did it to show the process for the viewer. It would be difficult to show the viewer what was shown if he was terminating from the other direction. However, it might have been a good idea to specify that he was doing this for ease of teaching and that the cable was normally placed in the opposite direction.

@LK-pc4sq 9 жыл бұрын

As long as the cable is supported "zip tied" to the 110, should not matter really if its inside or outside. The point that needs to follow is bicsi standards that is, the twist needs to be less then a half a inch and punched down. 110 need to be redesigned to put the position number on the outside of the termination row. It is kind of hard to read when it is on the inside of the punch down rows.

@ericb6390 4 жыл бұрын

@@LK-pc4sq its not that hard to tell, with order on inside, being they have it on every section and even if get to last point on panel then just look at the wiring of the rest

@Tommydco 3 жыл бұрын

Inside is in fact the correct way.

@FaberLSH 3 ай бұрын

Learning this from 2024. Thank you man

@Sunflower-hm9ln Ай бұрын

Lol same

@LoneIcon 4 жыл бұрын

This is the most focus tutorial ive ever seen in patch panel process.

@zarblitz 4 жыл бұрын

A clear, no BS video. Thanks. Extra thanks for identifying the components you're using, like the type of blade on the punchdown tool.

@ptdatacom 6 жыл бұрын

Nice video. Most manufacturers recommend keeping your punchdown tool set to the LOW setting when punching down patch panels as damage can occur to the patch panel. Often people will set their tool on HIGH thinking it cuts the wire better. LOW works fine. If it doesn't, you probably have a dull blade and you need to change the tip.

@mugentuner 10 жыл бұрын

Excellent tutorial here. really liked how you broke down the color coding standards as well as 'landing' the wires properly to minimize signal loss.

@pradeepwijayagoonawardana6358 Жыл бұрын

Wow 11 years old video yet incredibly detailed and clear description.

@UKTomsk 10 жыл бұрын

Nice clear and hassle free, just what the doctor ordered, thank you.

@softaws Жыл бұрын

Watching this video after 11 years Still I learn Something New

@Mom-pd5te 6 жыл бұрын

Great video. Very clear, easy to see what you are doing and the explanation of each step was completely easy to follow. I appreciate the time you took to make a very useful video.

@tripwired_ 11 жыл бұрын

Well paced video with clear videography, really useful - thanks!

@fishroombum3771 8 жыл бұрын

Thanks for posting. Good pace, clear and simple to follow. Nice work.

@frankluis1542 10 жыл бұрын

Excellent tutorial!!!!!!! Very clear and very good explanation, Thanks for helping the community. I will send my students this link for sure.

@Gledster 9 жыл бұрын

Really useful video, thanks for the clear explanation and demonstration.

@user-xw8tt1uj4o 6 жыл бұрын

THE BEST LESSON FOR THIS JOB IN KZfaq THANKS

@pauldawson9629 6 жыл бұрын

Thank you so much for this video. Now I know how this works and how to install my own. Thank you!

@DerrickThomas17 7 жыл бұрын

Very clear and concise video!

@sulantingan 6 жыл бұрын

Very informative, Thank you.

@exodk1352 11 жыл бұрын

great video. really easy to follow and only one i was able to find in a decent resolution

@harunamwebeya7861 2 жыл бұрын

You have kept your heart in this video I have liked it. It's so educative.

@Azghouls 7 жыл бұрын

For an old vid, boy it's clear as! A++

@abdulkadersohag 8 жыл бұрын

Thanks. I think this tutorials is very helpful for beginners...

@ffayaz007 10 жыл бұрын

There cant be any other video to beat this one on wiring a patch panel. Cheers up, man...

@RaymondHufford 10 жыл бұрын

great point of view and tutorial, subscribed for future videos

@farhanahmad5934 2 жыл бұрын

Nicely done. Thanks for sharing 👍

@bposkier51 10 ай бұрын

This man has done an excellent instructional video and audio. Great zoom shots too. Thanks

@DiscountLowVoltage 10 ай бұрын

That man is also very handsome 😍

@timlittle1083 4 жыл бұрын

Clear, concise, great quality video. Showed me just what I needed to see. Thanks!

@desantissecuritysystems4310 11 ай бұрын

You save me hours of work . Thank you so I was going crazy

@nadjibn69 10 жыл бұрын

so helpful, thank you so much !

@parviznieuwenburgizadi3753 8 жыл бұрын

Nice and pedagogic description

@velumani.. 5 жыл бұрын

Thank you, it's helpful

@setnaffa 6 жыл бұрын

Nicely done!

@cachemoneydotexe 4 жыл бұрын

Thank you for this video.

@stevenisonline 2 жыл бұрын

Excellent video, thank you!!!

@bilparanormalinvestigator5696 7 жыл бұрын

I appreciate the use of an Hd camera. it was easy to see the whole time.

@chasehammock 7 жыл бұрын

very useful THANK YOU!

@ramtrucks721 6 жыл бұрын

Thanks for the videos buddy

@andytownman1916 7 жыл бұрын

Thanks, some good tips in here, never occurred to me you can strip the outer coating with the thread. Don't mind the trolls.

@lohphat 4 жыл бұрын

I would not untwist the pairs before punching. Use the raised peak to wedge between each pair to keep the twists in-place up to the block to minimize cross-talk and signal loss -- this is critical for cat6(a) certification -- then untwist the pair on the cut side before punching down for a cleaner cut. Then you'll get a tight connection with minimal signal loss and a lower chance of needing to undo a patch due to a test failure.

@DiscountLowVoltage 4 жыл бұрын

Great tip!

@Dasquadwith6 3 жыл бұрын

Excellent video, thanks.

@vincelow 12 жыл бұрын

best video on youtube for installing a patch panel. VERY clear instructions, thank you!!

@muffinman8365 8 жыл бұрын

Excellent. Thank you.

@mutley457 11 жыл бұрын

good video...doesn't have hands showing and blocking the operation from view...it is the wire and the patch panel...very clear.

@ryanbarrera2595 6 жыл бұрын

Very clever and nice tutorial.

@Mprikiman 6 жыл бұрын

Great Video! The most detailed and thorough on punching down cables on a panel. You even explained how to properly use the punch tool. This may be the best video about this process on youtube. Thanks Mercy!

@RubicsCube49 10 жыл бұрын

Very nice presentation...thanks!

@ramseyfernando3420 5 жыл бұрын

Very good explanation thank you

@kearlstig1961 12 жыл бұрын

Yes. Instruction is very good!

@regaininglife9084 Жыл бұрын

Excellent video. Thanks

@about2flip 10 жыл бұрын

Great Video!!! Thanks

@paulmorrey733 6 жыл бұрын

Very Helpful Thanks

@techgood 10 жыл бұрын

Very nice video, thank you very much Sir!

@jeanBification Жыл бұрын

Hi from France 😉 thanks for pour help ...i love it 🙏

@DiscountLowVoltage Жыл бұрын

Viva la France!! 🥃

@iceradish 9 жыл бұрын

Your video is in very good quality and your explanation is so clear. recommended!

@gregblain4619 3 жыл бұрын

Good production!

@darlenelovelady7881 9 жыл бұрын

Thanks You , Thank You THANK YOU!!!

@ksudude25 9 жыл бұрын

Awesome video, its very concise, clear, and super easy to understand. That is the exact patch panel that I am looking for. Mercy, do you have the exact SKU number so I can order it online? Thanks!

@lvcabletechnologies7682 7 жыл бұрын

Yep, that's it.....great presentation Mercy! Keep up the great work!

@arsalan5858 4 жыл бұрын

Very very good sir for explaning and thanks

@kasraaghajani2371 9 жыл бұрын

Thank yo so much Mercy.Thank you

@cypressnirvana 9 жыл бұрын

Great video, thank you Mercy. (TPB is a great show too :^])

@mohammedalhamad5039 5 ай бұрын

شكرا لك . عمل رائع

@Mauricioav1992 8 жыл бұрын

Thanks bro!!!

@unicomp5705 8 жыл бұрын

Good intro vid!!!!! :-) Mike in L.A., Calif

@iseeker3845 6 жыл бұрын

Well done

@charlefrancisco6274 9 жыл бұрын

That's Great !

@guild_navigator 11 жыл бұрын

I have a brand new home with cat5 home run to a punchdown block in a panel in my laundry room. How do I tone out each individual cable? I can't seem to identify specific cables in the block.

@marquisgreer9386 6 жыл бұрын

Good Work

@ilaivunibola 11 жыл бұрын

very good teaching on the color codes on 568 B or A easy for dummies to punch down a panel ...just hoped you laid the catv inside block instead you got them from the outside ....anyways cheers bro plus very clear video !

@bobbybarnes1652 3 жыл бұрын

I think he did it that way so viewers could clearly see the colored wires matching the label on the panel.

@yasirfatoni8553 6 жыл бұрын

Nice brother😊

@cotelinc 6 жыл бұрын

Nice job

@tariqtabesh6319 4 жыл бұрын

Thank You

@amitdhiman3272 6 жыл бұрын

Good video thanks Sir

@michaelcasiano3444 8 жыл бұрын

thank you very much

@rammartinez6873 4 жыл бұрын

Hi, For example I have a utp cable with this scenario. I follow the color coding scheme type b on the patch panel on the other end what color coding scheme should I use direct to rj45, no keystone jack. Thank you for the help

@scherrycatherine 11 жыл бұрын

excellent!!!

@dannylee5588 3 жыл бұрын

Good video THANK s

@rolandgerard3816 7 жыл бұрын

Nice one

@mh63111 9 жыл бұрын

Thanks a lot Mr. Mercy for the nice video, it is possible to use one network cat6 cable for both PC and IP phone? I mean, can I generate a port from an existing port with out using a small switch or other device.

@kalimuthubalraj7651 5 жыл бұрын

Thank you sir

@darrdarr3321 10 жыл бұрын

Why untwist the pairs more than needed at all? Maintain the color's twist rate (each color has a different number of twists per meter) right up until they enter the punch down slots. The certifier should give you better results that way.

@patricksmith4496 8 жыл бұрын

+Darr Darr indeed! never untwist more than you need to.

@assassinofoz 5 жыл бұрын

@First Last Usually a Fluke DSX cable analyzer that certifies the cable is terminated correctly and will perform at the given speed. It also measures near end cross talk and far end cross talk which is why untwisting the pairs is a bad idea.

@martinkinyaki 10 жыл бұрын

Thank you

@brettk.1398 7 жыл бұрын

I love that this guy's name is Mercy. I need healing.

@babatundeazeez6019 11 жыл бұрын

thanks inspiring

@hema5699 7 жыл бұрын

Hi mercy! I must appreciate ...that it was a wonderful presentation...thank you so much :)

@evilspoons 11 жыл бұрын

Thank you for your idiot-proof video, very helpful since the installer who wired my apartment left one of the in-wall connections unterminated in my patch panel...

@wallyridgeway650 6 жыл бұрын

I understand he was keeping the cable on the outside of the patch panel to show the color coding but the sheath to the cat 5 should be inside of the patch panel. Other than that, great video.

@arvinbriones4032 Жыл бұрын

yow sir nice video, can i ask ? patch panel is use for extention? for the wall to connect a lan device?

@abdel2k11 11 жыл бұрын

thank you

@foralltheworld5099 3 жыл бұрын

Good , thank u I am learn from u

@wimptech6135 2 жыл бұрын

Thanks bro

@thedirtybubble9613 2 жыл бұрын

Very simple.

@aldoomar309 7 жыл бұрын

it is great, but, why didn't u do the second one?.....does it have to b wired at mirror image color order? or, looking from the center, u have to go in the same color order from left to right? please, include an explanation about it, and, if possible, as well, and clear, as this one, thx in advance....

@lefikashapi 11 жыл бұрын

Thanks

@rafaelguzman5601 7 жыл бұрын

is it better to place all of them first on the patch panel and then punch them down ?what happens if you punch them as you place them one by one?

@mohammedshareef8549 5 жыл бұрын

nice thanks

@smartinvestor9348 8 жыл бұрын

thanks Mercy, can we use the same patch panel and keystone jacks for both Cat 5e and Cat 6 cable ?

@bobbybarnes1652 3 жыл бұрын

CAT5e using 24 AWG cable, while CAT6 uses 23 AWG. Just means the CAT5e will be a tiny bit loose in a CAT6 patch pane and vice versa (although it should be OK). While you can get away with it, always use the correct panel & keystone when you can.