How to put an M111 engine into a 190e

Рет қаралды 10,195

10 ай бұрын

This is how I swapped my m111 engine into a 190e and twin charged it. If you are wanting any help with this conversion yourself please get in touch I'm more than happy to help.
Alex's channel: / @m-oneeleven-m111
Jimmy at go garage for your Mac boost controller mounts: Gogarage.us

Пікірлер: 83

@ADM_K 6 ай бұрын

thats what i call a build. shame you dont see more retro builds like this

@BoostWorx 6 ай бұрын

Thanks for the positive feed back Pal

@jonathondeeds3423 8 ай бұрын

This is done a lot in Nigeria, I see many W123, W124 and w201s with m111 engine swaps.

@kieranallen9892 5 ай бұрын

Lol that's my old car. 1992 190e K815 TEA, you can thank me for the wheels and suspension even tho they really didn't look how I wanted to lol. I'm glad it's had the engine I wanted to put in it!

@BoostWorx 5 ай бұрын

Haha that's amazing pal if you've got any old pictures I would love to see them you can message me on Instagram instagram.com/casey.round.1?igsh=MXA3MDVjMTJsdm01cw==

@M-oneeleven-M111 10 ай бұрын

The seagull bro that bird just wanted to make you suffer 😂 thanks for the plug man appreciate that, but damn I wish I could find a 202 like that man, but I feel I need another 190 in my life 😉

@BoostWorx 10 ай бұрын

That sounds interesting 😁😁😁

@turkatronn 10 ай бұрын

I bought a SLK230k 6 speed manual, 50k miles to do this project. Realised I don't have space and time.... Sold the SLK and now got a 190e sat in my neighbours garden and I'm like maaaaaaaan I wish I could do this. The quotes I've had have all been £12,000+ to do swap, standalone ecu, and turbo and I couldn't justify that 😢 one day hopefully 😞

@socialghost4400 10 ай бұрын

Good stuff dude....cool story about how the engine came to be too 😁...I didn't actually realize that your "Kompressor" engine came out of your red mercedes, I thought that was actually from the SLK as well

@BoostWorx 10 ай бұрын

Thanks mate I appreciate that yes the red mercedes was a beast and when I unleashed the nitrous on the autobahn the Audi RS6 along side me was only just keeping up 😂😂😂

@guzgaming461 10 ай бұрын

Great video Casey really good😁😁😁😄

@BoostWorx 10 ай бұрын

Thank you 😊👍

@guzgaming461 10 ай бұрын

@@BoostWorx thanks! You are the best good luck

@turkatronn 10 ай бұрын

Love how short and sweet these are.

@BoostWorx 10 ай бұрын

Thank you I don't see the point in making 30 minute videos people will skip through any way 😁

@caseyround 10 ай бұрын

Great video my twin brother 😅

@BoostWorx 10 ай бұрын

Thank you my creepy lookalike 🤣🤣🤣

@marlenagoralska5406 10 ай бұрын

Wonderful video ❤🎉🎉🎉🎉🎉 well done 👏 ✔️ 👍 😀 👌 and keep going 🎉🎉🎉🎉🎉🎉🎉I can't wait 😀 ❤

@BoostWorx 10 ай бұрын

Thank you so much for your wonderful support 😘

@AfroRussian 8 ай бұрын

Been watching m111 to get ideas for my SLK, cool to see he’s influenced you too! Keep at it

@BoostWorx 8 ай бұрын

I speak with Alex from m-oneeleven almost every day he is a brilliant guy and an inspiration 😁

@AfroRussian 8 ай бұрын

@@BoostWorx Yea he really is! I can’t wait to turbo my slk. If it wasn’t for him I wouldn’t have thought it was possible.

@BoostWorx 8 ай бұрын

@@AfroRussian wepl if you ever need help from me or him please contact us as we are always happy to help and share things we have learned

@zuzuz01 7 ай бұрын

Bro I would pay you to do this for me ! I’d love nothing more than to twincharge my slk 230. Been tryna get in touch with m one eleven but no luck

@BoostWorx 7 ай бұрын

@@zuzuz01 I shall message him for you bro if you need some advice

@redpig1120 10 ай бұрын

Awesome Job

@BoostWorx 10 ай бұрын

Thank you very much pal. Please comment on my canvas post in the community section to be in with a chance to win a free canvas 😁

@medievilassassin 10 ай бұрын

Great video mate 😎

@BoostWorx 10 ай бұрын

Thank you pal 😁

@medievilassassin 10 ай бұрын

@@BoostWorx what’s the part number for the flywheel mate? And did you use a standard clutch plate

@BoostWorx 10 ай бұрын

@@medievilassassin I'll send you the link for it mate it came as a full kit clutch plate, flywheel and slave cylinder and bearings all in 😁

@BoostWorx 10 ай бұрын

dieselpumpuk.com/products/mercedes-performance-clutch-kit?_pos=2&_sid=c4e6c38e0&_ss=r

@medievilassassin 10 ай бұрын

@@BoostWorx thanks mate

@_nikosb_520 9 ай бұрын

I have a CLK200 Kompressor (M111,945) and i'd like to buy a kompressor pulley like yours (and maybe a crankshaft pulley too if the a/f mix doesn't get too poor). May i ask where did you find them? Did you make a tune, or just plug in and play?

@BoostWorx 9 ай бұрын

They supercharger pulley was shaved down and ported by cooneytune (in Essex) I'm not sure if they are still running but and good engineer will be able to do this for you. The over size crank pulley I bought from eBay. These are available from a few different companies just type it in onto Google. I had the 230 Kompressor tuned by Mertech in Hull (east Yorkshire) on a Dyno. I will be doing a full standalone conversion soon using a plug and play loom from gogarage.us 😁

@creamyplus5654 9 ай бұрын

hoping to do this swap soonish, currently in the process of sorting out all other sorts of stuff like suspension and bodywork, how do you run the fuel lines for the engine? cheers

@BoostWorx 9 ай бұрын

I'm using the standard 190e fuel lines underneath the car with a 044 fuel pump. As for in the engine bay I have a aftermarket fuel pressure regulator and a custom fuel rail. This won't be needed unless you are intending on 500+bhp

@s13zenki 6 ай бұрын

And then he sold the 190e 😂😂

@creamyplus5654 6 ай бұрын

@@s13zenki it’s on sight

@eoinapetty 9 ай бұрын

Thinking about doing this swap with my 190e. what drive shaft are you going to use or does it bolt up to the 190es stock one? or what set up have you in mind? Thanks

@BoostWorx 9 ай бұрын

It will be the standard 190e manual prop shaft using a coupler from stern garage 😁

@Acab666Ftw 7 ай бұрын

What did you do for wiring the 2.3 compressor ECU to the car?

@BoostWorx 3 ай бұрын

I used a gogarage.us loom

@przemekp19 6 күн бұрын

Hello. I have a CLK 2.3k engine and I would like to put it in a W201 1.8 manual. Will the gearbox go from 1.8 to 2.3k? The Clk has an automatic gearbox, and the W201 has a manual 4b.What engine mounts you use?

@BoostWorx 6 күн бұрын

The gearbox from the w201 will have the same bolt pattern so in theory yes it will fit but. I do believe you need to make some alterations to make it work. If you need engine mounts go to Instagram and search for 190tevolution Andy prescott and message him he can supply mounts.

@The.Perpetual.Explorer 4 ай бұрын

do you have ac and heat? might do this swap. but its not so common here in the US

@BoostWorx 4 ай бұрын

Yes mate I do have it. If you contact gogarage.us then you will be able to get some good information from someone who has done it on a US spec vehicle 😁

@DanielMjeronimo 5 ай бұрын

hi mate, what ecu did you use?? i want to do the same, but i need a ecu for it!

@BoostWorx 5 ай бұрын

Rus EFI but planning on changing to a haltech when I can afford it 😁

@khalifamousa2731 9 ай бұрын

awesome how did you run the ignition please

@BoostWorx 9 ай бұрын

The ignition barrel is the standard 190e. I have a custom loom and standalone ECU to run it

@valadisbardis1390 28 күн бұрын

what modifications did that M102 had and it sounded like that? just a straight pipe exhaust?

@BoostWorx 28 күн бұрын

Home made cat back system, with no muffler. 😁

@johnnycash8670 4 ай бұрын

Its Look Nixe, Which flywheel do you Use ?

@BoostWorx 3 ай бұрын

I used a single mass flywheel from diesel pump UK made for an om606 but fits perfectly with a full clutch kit and slave cylinder from diesel pump UK

@paulsnow2044 10 ай бұрын

Awesome!

@BoostWorx 10 ай бұрын

Thank you very much 😊

@maltegerdes2351 9 ай бұрын

Hello what motor mounts do i need? And do i need a different Control unit, or can i Switch the engine without other component ? Thanks

@BoostWorx 9 ай бұрын

instagram.com/190tevolution?igshid=MzRlODBiNWFlZA== this is the man who sells mounts my friend. You can use the m111 ECU if you wish but I'm using a standalone

@DeafLambs 5 ай бұрын

@@BoostWorx what standalone if you dont mind me asking? Looking to do this swap on my 2.6

@BoostWorx 5 ай бұрын

@@DeafLambs I'm currently using a RUSefi but i plan on switching to a haltech when I save up for one

@elvispl100 26 күн бұрын

What was the overall approximate cost? Did you manage to build it under 5 grand?

@BoostWorx 6 күн бұрын

Yes it is possible to do it for less than 5 grand

@zuzuz01 7 ай бұрын

Have you got the car running yet if so can we see a video please ? 😮

@BoostWorx 7 ай бұрын

I haven't finished the wiring yet pal I will be putting all videos up as I build it pal

@EdwardM104 7 ай бұрын

Have you fitted a filter on the supercharger?

@BoostWorx 7 ай бұрын

Yes pal I used a Lasered plate to make an intake. I will be showing everything in up coming videos. Unfortunately I have a full time jobs and children and don't get that much time to work on my channel 😕 but I will in future be showing everything

@EdwardM104 6 ай бұрын

@@BoostWorx take your time man, I'm just glad someone figured it out! I've seen a few of these builds that ran no air filter for the supercharger, which just doesn't work for longevity.

@JDMCARSCIVIC 5 ай бұрын

What radiator is that?

@BoostWorx 5 ай бұрын

That rad is an after market duel core aluminium designed for a triumph spitfire that had the v8 conversions. I picked it because the pipes are roughly in the right place. You can find them on eBay for around £100GBP

@mr.h.8363 9 ай бұрын

Does the car have a/c?

@BoostWorx 9 ай бұрын

Yes my friend I've just fitted the pump and will be in my upcoming video

@mr.h.8363 9 ай бұрын

@@BoostWorx thanks! I'm so ready to start my project Benz!

@BoostWorx 9 ай бұрын

@@mr.h.8363what project are you starting?

@mr.h.8363 9 ай бұрын

@@BoostWorx I have a 1993 2.6l 190e!

@sdkreviewdz 8 ай бұрын

I need tutoriel please

@BoostWorx 8 ай бұрын

When the car is fully finished I shall make one 😁

@jaytaylor8443 8 ай бұрын

Biggest click bait ever…you missed the “vaguely” in the title 😆

@BoostWorx 8 ай бұрын

I apologise if you didn't enjoy the video.But I have done the conversion and I am willing to help anyone who wants to ask me any questions. 😁 I will share any knowledge needed. Be sure to comment on the community post for your chance to win a free canvas print 😁😁😁 Keep Boosting 💪

@jaytaylor8443 8 ай бұрын

I just thought I hit the jackpot with a step by step detailed description that’s all mate.. haven’t found a full rundown anywhere… they seem to be vague and patchy 😆

@BoostWorx 8 ай бұрын

@@jaytaylor8443 by all means pal if you need help pm me on Instagram and I'll send you my number and I'll give you a step by step guide I plan on making that video in future but I'm just starting out and don't really know what I'm doing with KZfaq