HOW TO: Quick INTERFACE CNC control pendant

HOW TO: Quick INTERFACE CNC control pendant - project example -

Рет қаралды 45,005

Күн бұрын

🔊 Learn the basics on how to run a job using the OpenBuilds Interface CNC touch control pendant
The idea here was to make a simple example to show how to jog the machine, probe the start position and start the job.
👉NOTE: This example sign took 2 cuts with two separate bits
1️⃣ First cut: Pockets using a SharkBit Down-Cut 2 Flutes Solid Carbide End Mill 1/8"
openbuildspartstore.com/down-...
2️⃣ Second cut: Profile cut out using a SharkBit Down-Cut 2 Flutes Solid Carbide End Mill 1/4"
openbuildspartstore.com/down-...
Please also note that sanding and cleanup was done for the final sign
Thanks for watching 👍
🔨Check out the Project here!🔧
openbuilds.com/projects/openb...
🛒Get your INTERFACE CNC Touch Controller today! OpenBuilds Part Store:
openbuildspartstore.com/inter...
📚Learn more here:
openbuilds.com/builds/interfa...

Пікірлер: 43

@toddduffett1378 Жыл бұрын

I'm not yet an Open Builds customer but I have to comment on your tutorials and how much I have enjoyed watching them and learning about your products. The presentations are first rate and so very clear and easy to follow I couldn't imagine anything better. When the time comes, I will definitely look to Open Builds for my CNC machine needs. Thanks to you all.

@OpenBuilds Жыл бұрын

Awesome, thank you!

@949Designs 3 жыл бұрын

Very slick! Time to upgrade some machines.

@OpenBuilds 3 жыл бұрын

Great! This will change the whole dynamic of your shops work flow, you will love it as much as we do! 🌟

@dave_the_bartender4904 3 жыл бұрын

i use industrial cnc router at work and that look like a nice interface easy to use !

@OpenBuilds 3 жыл бұрын

Thanks! We worked hard to make it user friendly so that people wanting to learn CNC are not intimidated

@learntobbq 3 жыл бұрын

Ordered my INTERFACE on Monday and I am supposed to get it tomorrow. Want to do a call out for Rachel in Customer Service. Rachel has done a fantastic job following up on any issue and even responds on the weekends. Mark my LEAD 1010 had a few issues that Rachel helped me resolve and now that I have dialed it in it is a GREAT machine. I make cutting boards, cheese boards and charcuterie trays. I named the machine TANK for it is built like a tank. Now I am looking for a larger place for my business for I want to add two more machines to the production line. Keep up the great work.

@OpenBuilds 3 жыл бұрын

Thank you for this amazing and kind feedback! Your story is a true testament of the OpenBuilds mission and we really appreciate you sharing it with us.

@marsmal7442 Жыл бұрын

Danke !!!!!

@DougsMessyGarage 3 жыл бұрын

Looks good Mark, I might have to upgrade my OX with a new controller

@OpenBuilds 3 жыл бұрын

Thank you! If you do please be sure to share #openbuilds so we can all check it out

@DougsMessyGarage 3 жыл бұрын

@@OpenBuilds For sure

@blingbloow143 5 ай бұрын

Do you have a video on how to connect interface?

@jazzkunst 3 жыл бұрын

Building my machine now with your Black Box controller...it's all gcode to me🙃 I'll order this asap so my router "knows its place in space".

@Joshslots1 3 жыл бұрын

Hi, when are the touch probes coming back in stock? I’m from the U.K and would like to order the interface and touch probe together to save on shipping. Thanks

@OpenBuilds 3 жыл бұрын

Hello Joshua if you reach out to the Part Store they can give you the best answer and work with you to help insure you can get them both. openbuildspartstore.com/contact-us/

@kamyarghofrani 3 жыл бұрын

Hi, Is this device open source?

@warrenvannuil8401 3 жыл бұрын

How much gcode will the memory hold. Is upload of gcode from sdcard or usb been think about ordering one for my lead 1010

@OpenBuilds 3 жыл бұрын

Hello Warren. It reads the gcode from the flash drive so you can push lots of Gcode. Check out more in the docs here - docs.openbuilds.com/doku.php?id=docs:interface:start Check out the Interface Build - openbuilds.com/builds/interface-cnc-touch-control-system.9688/ Also be sure to jump on the forum and see how others are using the Interface on their machines - openbuilds.com/threads/interface-cnc-touch-controller.16906/

@gregoryayres1535 3 жыл бұрын

does the controller have the ability to turn on a spindle and set rpms?

@OpenBuilds 3 жыл бұрын

Yes you can turn on/off the tool. The rpm setting for the rpm is planned for an up and coming firmware release.

@TheAusherGuy 3 жыл бұрын

Will this interface work with the cnc xpro v5 controller?

@OpenBuilds Жыл бұрын

You can find information here docs.openbuilds.com/doku.php?id=docs:interface:connect-generic

@fathmi 3 жыл бұрын

Wondering when is the Interface mounting build coming as mentioned?

@OpenBuilds 3 жыл бұрын

Hi Fathmi, thanks for asking it is in the works it just a busy time. In the meantime I can tell you the magnets I used are here - amzn.to/2WldHgo I tried a lot of them and this one works great.

@fathmi 3 жыл бұрын

@@OpenBuilds I noticed the rear of the Interface is non magnetic.. did you have to stick a metal plate in the back?

@OpenBuilds 3 жыл бұрын

Yes these car mounts all come with a few different sizes small stick on thin metal plates and we made a center template that will help line it up when you stick it on.

@hdbasses 3 жыл бұрын

Will this work with my Arduino Uno on my current controller?

@OpenBuilds 3 жыл бұрын

Yes it should work please see the docs here for more information that can help you make the connection - docs.openbuilds.com/doku.php?id=docs:interface:connect-generic

@redherring5532 3 жыл бұрын

Got an email for this and jumped on it right away, looks cool and I'd hate for it to have the same fate as the Router11 and only be available in bundles 😒

@OpenBuilds 3 жыл бұрын

Awesome catch John thank you for your support. WYou will love have the Interface on your machine. Its really that great to just walk up and use your machine anytime you want without the laptop, even if you just want to jog it around to show a friend how it works it ready.

@redherring5532 3 жыл бұрын

This device is awesome, finally got some time to try it out, literally plug and play, plugged it in, loaded and i was jogging and clicking the router IoT on, magnetic phone holder is a great idea. Designing a minimalist 3d model to print to seat it in and alleviate some of the wire's strain from moving it around. I do have question, I want to extend the wire a bit from the black box by a good foot, would that be too long?

@AndreMercado 3 жыл бұрын

There's a mount for the interface?!

@OpenBuilds 3 жыл бұрын

We are working up a quick build that will be released in the next week or so and it will show how to make a mount that is made from a magnetic phone mount for cars. But you can use pretty much any of the car mounts that are out there now. Here is the link to the magnet that we used for ours - amzn.to/2WldHgo

@frankbarlow3154 3 жыл бұрын

Where do I buy one in Canada?

@OpenBuilds 3 жыл бұрын

Hello Frank, please contact our support service for a local distributor - openbuildspartstore.com/contact-us/

@xl000 3 жыл бұрын

I know this has nothing to do with the content, but do you happen to have strong grip ? It looks like you could easily close a Captains of Crush #2 judging from your wrists and forearm size.

@OpenBuilds 3 жыл бұрын

Runs in the family :)

@iwannaapple7190 2 ай бұрын

Do you know how I would hook this up to a Demon controller? Using a printer cable that eventually converts to UART doesn't seem to power it up. I can't even seem to get it to update using the Flashdrive and the software that is downloaded to update it when I hook it up to the computer. About the only thing I can do is play that little game.

@OpenBuilds 2 ай бұрын

Hello, for personalized assistance with connecting your OpenBuilds interface to the Demon controller, please contact our customer service team at support.openbuilds.com/support/tickets/new . They'll be able to help you troubleshoot the issue effectively.

@iwannaapple7190 2 ай бұрын

@@OpenBuilds I did. They did not help. I sent another message haven't heard back. I would love to use it though. They only sent me copy and pasted material.

@OpenBuilds 2 ай бұрын

@@iwannaapple7190 OpenBuilds can provide support, when possible, but unfortunately, we do not have the "Demon Controller" in our inventory. Therefore, to ensure the most accurate information, we recommend reaching out to the manufacturer directly or posting your questions on the OpenBuilds forum. On the forum, you will have access to individuals with varying experiences and knowledge who may be able to assist you. openbuilds.com/forums/

@iwannaapple7190 2 ай бұрын

@@OpenBuilds I heard from them again and I appreciate your responses too. My only problem is there is another chip card on top of the Arduino board. I don't see any bolts holding it there but something is and I don't want to go around and yanking on anything to access the Arduino board. I'm not familiar with how things like that are usually done. But they have offered a return. I either sell the demon or buy the blackbox OR figure out what is holding down the demon shield chip card that is on top of the Arduino. I just wish the reviewer on openbuilds website would have explained how he did it. Thats the only reason I bought it-that and my battery swelling that I had to replace on my laptop for long carve times.