Great content for all of us self quarantined. I put a wooden tee in the end of the grip. Pour the mineral spirits into the grip. Let it sit while I put the double back tape on. Then pour out of the grip on the tape. Makes both the inside of the grip slick and the double back tape slick. Slides on real easy.

I cried when you destroyed that grip! I have a £15 tool for removing grips and it's soooo easy to do!!! A little tip. Heat up the old grip tape a bit with a blow dryer or carefully with a heat gun and it peels off easy peasy!

Several observations: You need more golf balls,golf shoes and clubs When I redo my grips, I use a small vise attached to my work table. I use a paint tray to catch my mineral spirits. I also use a curved bladed knife to cut my grips off. Get right under the grip and slice all the way down. Easy pesy

Did my first grip changes last year.. found a bunch of Spyder grips on clearance at a local golf course , big box of them by the checkin desk £1 a grip. Picked up a bunch of tape, spirit and a rubber golf club shaft clamp to use in a vice so you can get the club secure but not crush the shaft (amazon or eBay, cannot recall). Then cut up a "PET" bottle - 1 litre tonic bottle - cut it in half lengthways and it makes a great tray to catch the white spirit as you wet the tape. Plug the end of the new grip and swill a bit of white spirit into it - empty into the tray - and off you go. So long as you got the club set up in the vice with the club head pointing straight up it's pretty easy to get the new grip aligned. I was planning to do some tomorrow :) so very timely reminder James.

I have a 7:34 T-Time in Virginia USA tomorrow morning. I will be playing with a new grip on my driver that I will be doing myself today. Thanks for the tips and really enjoy your videos.

James, You should always remove the label when refilling a bottle with anything other then what the label states. Then use a marker and put what in the bottle on it.

James Robinson, This is exactly what I am going to be doing in the lockdown, as well as changing some shafts so this video was awesome. An idea for keeping your channel fun for us viewers is picking up one of the in home simulators with course downloads. Come majors, you can do your own and video your round. Plus, we all want to see you come in first at Augusta this year!

I spent some time today taking the grips off my very old set of clubs. After finishing the removal process, I turned on KZfaq to see that James is showing us how to re grip clubs!!! Amazing timing James and thank you! Now to see how long it will take Amazon to ship some grips and a grip changing kit to me... Stay safe everyone!

I need to get a video of the local guy who does all the regripping on the island. No knife used and no white spirits. He uses compressed air and a type of lathe to spin the shaft while taping up. Great to watch

Hi, James, I'm practicing putting indoors with my Puttout and chipping in the garden I'm actually enjoying it as I don't normally get a chance to practice. Unfortunately, I am essential personnel for the MOD here in NI😩 so trying to keep safe as much as possible. Great vlog Cheers James 👍🏻Everyone stay safe

Handy little one for you. Put your white spirit in a washing up bottle. Use the tip to fill grip and empty in the bin. Just put some paper in bin. Evaporates in no time.

What am I doing during lockdown? Drooling over the shoe collection you teased in this video! Especially the Adidas CodeChaos! Yes please!

Playing golf outdoors is totally OK. You not near anyone (or don't have to be)... looking forward to more vids, ty for helping out with all this

Great instructional video James... I am tempted to have a go myself... sons clubs first then to start methinks

Good video again James. I used to cha ge grips and crank clubs about 18 years ago in another life, and plan on getting my garage sorted to start doing it all again as a hobby. Thanks for the quick recap. I'll no doubt refer back again. Stay safe buddy!

Thanks James, that looks so easy. I think I will practice on an old club first, but just great stuff to be keeping us busy at this awful time.

James built a two hole course in my back yard. We are on a lock down in southern Canada 🇨🇦. Thanks for the idea.Stay safe all golfers 🏌️

As a medical provider that is not only not quarantined but stuck in the middle of all of this working extra hours thank you for the continued content. We need something to get our mind off of.....everything.

James how many drivers u got in ur office🤣🤣👏👏 those are top notch drivers. I love the way youtubers have huge stashes of clubs they dint use you should do a mass giveaway

Very practical mate! As for all those Drivers & Putters... 😍😍😍

You have so many pairs of boost 360s, best golf shoe I have ever worn!

Very useful! Now to decide which grips to use.

Thanks for continued content James . You can use a paint roller tray to catch the liquid , or hold shaft vertical and use a old cup to catch it

James: I dunno, I'm weird! Us: Yes we know James, that's why we watch! Thanks for keeping the content up bud, really appreciate it! 👍

James I love this video! While on lock down I'd love to see you do more like this, sifting down talking to the camera. Would love a Q&A type video

Hello James, From Hanover PA USA. Same thing learning how to get my golf fix without playing. Frustrating not playing, We have to be creative and busy. Thanks for the info, really helps. Keep up the good work and stay safe.

I started doing my own grips last year, never looked back. Dam easy no special tools needed I used a kitchen knife to cut em off, removing the tape sucks but solvent helps. Aligning takes care but its easy enough, use LOTS of solvent to attach and heat grips first ( in hot water ). Buy your grips on Ebay you get amazing bargains, those form China are ok not as perfect as the originals but still dam good. You can replace 4 times and still save money.

Great content. When the hardware store opens up, get yourself a hooked, carpet-cutting blade. And, a cheap air compressor can be used to blow the grip on.

Not bad. Obviously there are many ways to do this, but you covered it nicely. You might have mentioned shaft diameter vs. grip core diameter. I missed paying attention to that a few times and wasted a few grips because of it. And I use a hook end blade for taking the grips off. Straight edge is a little more dangerous, but if you are careful it works fine. Also, temperature is a big factor. Don't try to do this when the grips are cold. Another lesson learned. Funny you should do this today......... I just ordered 2 new Putter grips for my own Putters. Putter grip type? A whole other issue. I am changing from straight to pistol grip contour. Anyway...well done James. Thanks for keeping us entertained. We get it.

I love the trippy reverb effect hahaha

Unfortunately I still have to work here in NY. Thanks for content to keep things closer to normal. Have a great day and stay safe!

Man I used to regrip on the daily but haven’t for many years. This brought back memories. Now I wanna do mine just for the fun (that’s something I never thought I’d say lol). 👍👍

Great video, as was the course creation, entertaining and informative, more like this on equipment would be wonderful, changing shafts, getting stubborn driver heads off, groove sharpening etc, stay safe and keep em coming mate.

Great video James. Going to have a go at regripping a couple of clubs. Just have to order the grips!

Now that’s a useful video 👍.... you may need to think about re-labelling the water bottle though 😂

What a cool video! I’ve always wanted to try changing a grip, but I’ve always been afraid to try it. Doesn’t look so bad now that I saw you do it! Stay safe everyone!

Amazing we have the best tech ever in history an no one installs a grip correctly just AMAZES ME im not a fitter or golf club repairs i do my own an i like mine perfect cause this game to hard not to start perfect

I use a Stanley hook knife you did a great job thanks for all you do stay safe James

I re-grip my clubs once a year in my garage. Have all the blades, tapes, solvents and bench vice. Been doing it for 30+ years. Just did my putters yesterday, now we wait... until we can play again!!

I have a rubber grip that grabs the shaft and then sits in my vise. Another trick is to pour the mineral spirits in the new grip and give it a shake, coating the inside. Then pour the contents on the shaft all sitting above a wallpaper tray. I find putter grips are the easiest to change.

I’m enjoying these videos during lockdown. Get a kinda “real world” vibe about them. A more personal touch. You deserved 100K+ 👍

love the content, my irons could do with a re-grip! question... you dont have any TP5's spare by any chance??

If you use a hook razor blade it makes it alot easier to get under the grip and pull away from the shaft. Been doing my own grips at home since a teenager and its very easy after some practice.

One recommendation I would do is to put the head over on while messing with taking the old grip off to prevent any possible drops which would be terrible on that putter.

Well done on removing that tape. That was class. I've spent 90% of the time regripping removing the old tape.

Question. Putter grips? How do you hold your hands on a putter? I have seen loads of different ways to hold the grip, but what is the best grip for the grips. for example I have a pencil grip just like yours, but how to you hold it make a stroke? great vlog and its easier than I thought I was to re-grip clubs, will have to give it ago

putter looks class mate well done

Lovely... Been scared to do it... That makes it look pretty simple. Thanks dude

Nice job James seems easy to do, looking forward to the next video. 👍

You made that look hard work James 🤣. Tips: 1) Cut down the side for a graphite shaft (quicker and no damage) 2) Use hairdryer or heat gun to remove old tape 3) solvent in grip, shake the grip (cover hole with finger at top of grip) then pour over the shaft from hole and then fit grip. You will use less solvent. Hit me up on instagram if you want to learn more on club building, qualified club builder 😉.

Great seeing content during these tough times. 👀 Wish I had half the boxes of golf balls I see stacked there. Just the one box of ProV1 for me. 🤨🤨

Extremely jealous of your club collection James 😔

Great content James, very instructive, heck this will save me $3 a shaft. I tend to regrip my clubs every year. I haven’t done so yet this year and now looks like as good a time as any. 👍

James, could you please do a video on how to adjust a driver and how the different settings have an effect on your shot shapes? Thanks.

Hairdryer to gentle heat the tape , comes off a dream, use a little spray bottle to spray the white spirit on and an old baking tray

I've never seen it done in a spiral before usually it's 1 long piece length wise rapped around. Stay healthy James.

James, great channel - keep going mate. Lockdown will be over eventually and you'll be on the course again soon!

Great vid James keep it up maybe a vid suggestion on maybe cleaning your golf clubs at home? And equipment 🤔

Have regripped my clubs for about 50 years...easy to do. Currently use Avon Chamois Jumbo on clubs and Tiger Shark Mega on putter. Best tip that I cangive...use plenty of solvent.

Get a gri[ remover - they are worth every penny. Only the Super Stroke grips are tough to remove because they have hard plastic bottom pieces that do not allow the remover to easily get between the grip and the shaft. If you are worried about marring the shaft - tape it with masking tape and you are all set. That Cameron Matador grip is worth more than the grip remover :)

Hey James, whenever this lockdown is done could you test the new Ben Hogan Icon irons. Great vid thx

I have clean my clubs ..2 times..lol Change my laces in my golf shoes..watch golf improvement u tube lesson..been on line looking for new shoes and gps watch!..just dying to play..I work at a golf course but we are shut down because of this virus..!!.. Great video James..thanks

Once I learned the compressed air method, I’ll never do it the old way. I haven’t tried it with a putter grip though.

Got a video suggestion. How to get the green marks from hitting mats off the bottom or your irons. I always try to stay off of the mats while at the range, but pro shop tells you mats only. And you have no other choice, but to hit from the mats.

Great minds, just ordered grip tape and grips yesterday in preparation of lock down in Australia.

James, they sell hook blades for Stanley knives. Makes taking old grips much easier and safer for the shaft.

I love the golf ball flex throughout the video 😂

I made my own putting green out my back with a great amount to practice short off the green like u thanks for the great idea

Good vid, Recently started doing my own re-grips, satisfying. Could you do a vid on swapping out a shaft??

How many Mars bars did it take? Another great video sir. Nice Volkey club in the background. Congrats to the winner if it's already announced.

Great video James but I think I will still leave it to my club fitter

As usual, interesting content, I have a little rubber grip to sit my clubs in, in a vice if that makes scene - easier to manipulate tape & new grip if the club is in a fixed position 👌

Good and interesting to know how to re grip a club and I reckon I would be pretty decent at it but I think I'd leave it the pros with specialist tools

That Scotty grip is beautiful

Please do a video on how to practice in the apartment during this quarantine

As per other comment, use a hook blade, much less risk of shaft damage. Also I use a takeaway plastic tub under the grip when pouring over the tape, then use saved spirit and pour it into the grip. I’d do tend to order an extra grip each time to cover for operator error

Hi when I change a grip, I use a hook blade in my stanley knife as it stops you sliceing the shaft and is a lot quicker

Did mine Monday...but courses are still open in FL. Stay safe!

There is a relatively inexpensive hook tool that is made to help cut through the grip and helps alot.

Was just practicing my swing in the garden James going through my routine before I take a shot

Office tour?

Thanks for the info and the content. Will attempt to do this soon and appreciate the knowledge share.

What's with the stacks of TP5x's and TP5's

Well done bud, If you need any of that spare product tested in Canada thats in your office there, I have no problem helping.

hook knife to cut grips and a hairdryer to warm up the old tape will make it really easy to remove

Heat gun. Blow dryer is the key to getting the tape off... makes it done if like a dream.

Hey James, Great video lots more like this please! its great to see how your passing the time. I have recently bought my first scotty on golf bidder and I want to do exactly what you did, but I cant find the scotty pistolero grips anywhere. Would you have info or be able to point me the right way? Thanks a million

About to put a duvet cover over the clothes line to make a net like structure

James another great video 👍 I’m looking at doing my irons. I prefer a thicker grip. Would you suggest buying thicker grips or adding additional layers of tape? Cheers. Stay safe.

Taller container And dip the shaft in or spray bottle with spirit in it, is a little cleaner

I think we need a putter counter as well as the follower's counter (there must be at least 10 in that bag)

I’m 17 about to be 18 on saturday and i work at the local PGA Tour Superstore and I regrip clubs there. I started off when I began to play golf. My dad taught me how to do it and I really enjoy doing it. everyone gets scared about doing grips at home when in reality. they are very simple to do if you take your time. and with everything going on in the world now, there is no better time than now.

Love to see a review of your scotty collection 👌

Do a mid handicap test with the Cleveland HB turbo irons

I literally googled this 2 hours ago. Thanks mate.

Great vid james

I've two full sets of clubs to get done during this period. Old grips all removed, just need some more tape first.

Great video! Been wanting to try this for a while now. Is this process the same for irons? Need to try regripping but don't want to mess it up and have to cut it again!

Ah...use of razor blades in quarantine? You sir....are the bravest Brit I know. Also....I don’t know any brits so...yeah. There ya go!

All those TP5x balls 😍