I have three years experience as a machinist and it took me a while to learn how to read calipers and micrometers. And you can teach someone to read mics in six minutes, truly amazing. Thanks

You can’t beat a teacher who explains things clearly and precisely. That was a great video. 👍

One in a tousand teachers are born to teach, Sir you are in the one percent. Thank you

I have spent 45yrs working and living with the metric system and the imperial system has always confused me . Your explanation is the only one that truely makes sense . This alows me to finally make use of a number of engineering tools i have inherited, and for that I extend a very warm thankyou 😊☮️

Thank you! I am taking an Automotive class in college, and when the instructor showed us how to read a micrometer, it went over my head. this made it crystal clear.

I’m getting older and find it more difficult to remember new information. Just getting into machining as a hobby. I’ve watched other videos about micrometers in the past, but needed a “refresher” since I’ve mainly used digital calipers to this point, but now wanting closer tolerances. This is definitely the best, most simple instructional video I’ve watched. Thanks!

Finally, someone made this easy to understand! Thank you!!

I watched this video two times and I can honestly say it took 15 minutes to learn how to use this . best video

You have probably heard it before, but I want to remind you how much of a phenomenal instructor that you are. 😊

Best video I came across yet ! Clear explanation with place values and which reading on the micrometer corresponds with which place value ! A lot of other videos completely miss that

One of the best tutorials I've seen in regards to reading one of these micrometer and this is even after I had a QAT class that dealt solely with reading these things.

All my years in maintenance I have not needed a micrometer. Now I'm working where I need this knowledge. I have seen them used, but never explained. Thank you! This is a very explanation.

Thanks a lot. Just started a machinist class and we're on the chapter regarding precision tools. This helps to compliment my textbook reading

This is the clearest, most easily understood video I have seen on reading a mike. Well done, sir. Hoping to find one on reading Vernier scales!

Thanks for this instructional vid. Really helpful, clear, the repetition makes sure you understand. Great work. Cheers

Best micrometer explanation.

Great teaching skills! Simple, easy to understand. thank you!!!

I've struggled to understand how to read a micrometer up until now. This video teaches in a way anyone can understand. The use of the red dot made it so easy to follow. I now know how to use my micrometer. What a great video. Thank you.

This video was excellent. It helped me understand completely how micrometers work in a fashion that made sense and sunk in my mind. Thanks so much!

I have practical exam tomorrow ,You're such a life saver ..thanks Alot ♡

After watching a bunch of video on micrometer, yours is the best one. Clear and simple with the onscreen text, Thanks

He did a great job of explaining how to read the micrometer. He made one mistake that I can tell. @ 0:45 he says "Point THREE seven five," and then says "Read it as seven hundred thirty five." I love youtube. You can learn so much from it.

Wow all these years I never Knew how to read that until watching your video. Very clear. Explain very well . Thank you!!!! Can you teach us how to read the dial indicators

That's so easy and I just learned it lol wow. This video should get an award. It narrowed down so much that I got it down real quick. The method he uses to convey the whole system was very simple. Great vid!

Can’t get a better explanation than that! I had so much trouble. Now I’m crystal clear. Thank you so much.

By far, the best video explanation I've seen. Instantly came back to me with this video. Thank you.

Best video I've watched on this. Really helpful, thanks!

Best of the instructional micrometer videos I have seen so far!

I have to use one of these on a new job and what seemed mystifying at first is no longer mystifying. Thanks!

Needing some refreshing this video was excellent. Thanks for the upload.

Thank you! My teacher tried teaching the class how to read one and it was a mess. This video was SUPER helpful!

Thank you so much for this vid. I have a performance final coming up and reading micrometers was the only thing giving me trouble. This helped a lot.

Needed a refresher and couldn't have come across a better video. Big thumbs up.

Best video out there on how to read a mic!

Great job on the video. It was put together very well. I have been trying to figure out how to read a micrometer and now I know!

Just started my new position as a machine operator and need to learn how to use this contraption....dude your explanation on how to use this thing so straight forward.....dude thanks!

I thank you for taking the time to teach the way I do. Just a fine video.

How does this video have 33 down votes? This is the best micrometer video I've seen? Only explanation, 33 people were using Windows 8 & Internet Explorer.

this is probably the best tutorial i have seen. much better than what they taught back in class.

Very, Very, good presentation. I am glad that you have patience. Thanks for your time!

I have always had a decimal issue so your remedial explanation was very instructive, thank you

Very helpful, Thank you very much. This is the best one that I've seen.

Thank you in school now was having trouble. Great explanation if you could give quick reading tests on here that's great confidence for someone like me who is nervouse on tests. Thanks again future mechanic. GABE

Thanks for sharing and helping me refresh myself on reading a micrometer again.

Nice and clear explanation. Thanks.

Great job on the explanation, simple and easy to follow, Much thanks

Excellent video. You made it so clear for a layperson to understand the process. Thank you!

I've always had trouble reading micrometers. This made it very simple and easy- Thanks!!!

This is an excellent - clear - step by step instructions. I'm 50 years old trying to secure employment in quality control. I need to learn, understand and apply this type of skill set. It is not easy but you have made this so much easier to understand. I still have a long ways to go...but thank you! Now to push my luck do you have suggestion- blue print reading 101. I am add and a little dyslectic. But really grateful for the simple yet precise presentation.

Thank you sir you are a good teacher and I appreciate you showing me how to read a micrometer because I need to know it for my CNC lathe work. Thanks Landon.

Excellent description of how to read a micrometer. Thanks

Nice video with clear well-spoken narration. Great graphics too, nothing botchy. Do a vid covering the vernier scale, several ask in comments, so the interest (and confusion) is there.

Thanks a lot etprof for making this video. I always had difficulties reading a micrometer and this video actually helped me out ! thanks again :)

best tutorial ever im a diesel student and we have just taken apart a c9.3 cat engine and we have to measure the cam shaft crankshaft and deck height warpage etc and this saved my ass

Very helpful and easy to understand video on how to measure with this tool. Thank you very much.

I needed this little refresher. You made it so easy 👍

That was a good video. Very clear and concise. Some of these videos drag it out too much.

i know this is old but the best explanation i have ever seen!

Thank you for such a helpful video! This is going to be helpful because I have to measure the out-of-round and taper wear limit on a small engine I'm rebuilding.

Awesome video. Straight to the point. Thank you.

I watched so many videos and never could make sence of it thank you so much I get it now I’m so happy!!!

these scales have been a mystery to me until I saw this video. Looks like I just needed someone to explain it to me in terms I could understand. Thanks!

Thank you, Such a simple explanation.

Started watching a 16 min vid on this and saw this 7 min one in the suggestions, happy I chose this one instead.

Thank you for this video. You made it so easy to understand!

Thank you.. I needed to learn this stuff for my auto class! Thx!

Job interview in a few days I needed this ,thanks :D

thanks alot man!! finally i can now score full marks in my physics practical exams........

Best video I've watched for Micrometers

Best explanation I have ever seen for this mate thanks so much

Very simple video and it clarified this topic for me. Thank you for posting. God Bless...

Very good and understandable video. been trying to find a video like this that would help learn how to read this caliper. Thank You

You are one of the best teacher. excellent explanation and the way how you explain thanks 9h1es

Ok this was in insanely useful video. For my measurements test I got 100% in less then 10 minutes. Early day for me on Friday

Good video, I like your graphics. Maybe I'll remember this time!

Thank you. Your a really good teacher.

Thank you, very well done and easy to understand

Great video, simple to understand.

Thank you so much! Im learning to use the micrometer, made the mistake of thinking the 350 mark was on the barrel was 375 while the thimble was under 0, I was over by 25. I saw the 375 line and my mind just thought it was 375. This makes it so simple. Thank you!

Very good explanation the best I have seen. Thank you John

awesome video. Explained it perfectly

Thanks for the thorough explanation!

you are a very good teacher!

Thanks a lot that was beautifully done.

Best explanation I’ve seen yet

Thank you so much! You just taught me a life long skill

thanks a lot . I have my practical exam tomorow really helped:-)

Best one i've seen. Good vid

THANKS MAN THIS REALLY HELP ME PASS MY THEORY EXAM :) THUMBS UP

Thanks, you explained it in a simplistic manner, obliged

Thank you for this video! very very helpful!

Perfect! I hope you are the teacher!

Helped me A lot for my exam. Thanks :)

Thank you for the clarity.

EXCELLENT! very detailed and informative...thank you

Great Video Explained to the fullest Thanks!

I officially learned how to read a standard micrometer with this video!

Excellent video man. 👍👍👍

my favorite video of explaining this .

Thanks for simple instructions! Needed a tiny refresher on micrometer readings 📚, been hs shop class since used one and that, so that's about 22 years ago 😆, and be honest, wasn't paying as much attention as should of have!!!