You handsome bastard. I love it when I have a question and the video that pops up is someone I already watch. Thanks dude!

awesome video! that's literally exactly what I needed to learn because I'm gonna do this technique for mixing with some of my guitar pedals, and this us the only video on KZfaq that shows exactly how to do it and demonstrates! Thank you

The di box outputs a mic level signal, not a line level signal - anyway it's a minor detail. Thanks for the explanation, great video 👍👍

great video, that will help me a lot, thank you so much, I also read somewhere that you can reamp with out a reamp box, but you will not get such a great tone

Dude, thanks a lot. Now it's crystal clear how it works. So much people tried to explain to me without gear. Thanks a lot again!

Thanx! informative - yes and not to bloody fast as many other KZfaq channels. Rock on!

idk man, the way you kindly handed me your scarlett at 0:20 seconds of the video made me instantly like and subscribe to the channel...

THANK YOU!!! Was getting a weak signal into my amp when re-amping, the MONITOR dial on my 2i2 was down, thanks to your vid it's working as expected now! Thank you!

That was very well explained and helpful , I guess I can use the torpedo as a DI box

Dude you are an awesome teacher and player too!

Keep up the good work. I use an Apollo x8, I realize now I went overboard.

This is a really cool straight forward video. I have an SSL 2 plus interface. I'll try this with my ableton live 11 soon.

Good to know. I got the exact same audio interface. :)

I appreciated your video but I think there are a few options less complicated. 1.- If you want only the DI, just plug the guitar in Focusrite using instrument mode and if you want to hear not the DI while you play, use some plugin in your daw with low latency like Ignite 2.- If you want to reamp with focusrite, plug the guitar direct to input 1 and set output 1exclusive to input 1, then plug the cable from output 1 to amp and the cable from the amp mic back to input 2. In your DAW you can record both. Don´t needed reamp box. I use this technnic with Focusrite 6i6, recording DI and signals processed through different signal processors.

Sounds great my friend!!!!

I was pretty sure that's how I'd use a Radial DI box to get a DI signal for re-amping later. Thanks!

Great videos ii just bought a new interface with 4 outputs just so I can run outboard gear and reamp easier 🤘🤘

Thx you so much man 🔥🔥

Thanks Euge!

Great video and explanation! I would love to see how to re-amp with lets say my go to or favourite microphone/s situation?

Coming from someone that is FOH Engineer (I also play the guitar in my spare time) the re-amp boxes are quite costly. Personally, I think these things are much better suited for live use but that's just me an my opinion.

damn best video of youtube here !!

Love the video. Thank you

Thank you for making this so simple. Love your vid's.

excellent video !

I'd like to see reamping from headphone out. I'm trying to find a video showing if there is a reamp device which does stereo unbalanced low-z in and stereo hi-z out. My interface has to stereo headphone outputs, but just two mono monitor outputs, like your Scarlett one.

I heard to can use pedals with buffer as a replasement for reamp box. Also, will it work with Scarlett 2i2 2 gen?

Awesome video as always Euge very informative! Would you consider doing a review for the Amped plugin you were using?

Wht will happen if we directly take output of interface & plug it into Amp input & then output of Amp to reactive load & then to speakers ... Will it work ? 🤔🤔

Thanks, dude! Very helpful!

you could get more but just tweaking the virtual one you'll do fine

Finally this is exactly what I wanted to do. I just ordered a suhr IR box. So I cannot do this on a scarlett solo? I need a 2i2?

What would you say the optimal level to track guitar/bass via DI with the express purpose of reamping is?

Thanks for the info brother!

Thanks for the Infos!!! I m a noob and i m not Sure i get it 100%... i want to record my bamboo flute with reverb and delay pedals from a condensor mic. So, i connect condensor mic to interface in, from out to reamp, from reamp to pedals, and from pedal come back to audio interface in.. Am i right??? If i connect my headphones to the interface, am i able to hear the wet signal in real time ???

if you want reamp 2 diferent guitars for the same track with a focusrite of 2 outputs ?

Interesting video! How can you avoid the feedback loop considering the scarlett 2i2 have only two outputs?

This may sound like a dumb question but why didn’t you just record it in the first place with the amp and pedals?

Thanks for the video. Which method do you prefer best? Record directly from the focusrite and guitar or use the Marshall into the Radials? Seems like the latter but I’m curious to hear your opinion 😊 thanks again

Thank you for this!!!

Cool video, how do you make sure the volume you recorded matches exactly the volume you send to the amp? I find that after I record, then I have to send a signal that is -6.5db (volume on the channel) to get about the same level that the guitar would send…

reamp di signal is cool to give a different voice to a recorded track. but if recording just the amp signal, do i need a regular ts guitar cable or a trs cable from the reactive load ir output to the focusrite input? thanks

Thx for the great explanation! Just 1 question. Shouldn't the "inst" option of input 1 be on? Since input 1 is receiving the signal directly from the amp and that signal is bypassing the DI box.

What are you using the DI Box for? EDIT: It is shown at the end

Euge, many people says that a simple DI box like the J48 would work exactly as ReAmp box! What do you think? 🙄

Hi Euge. I have a hybrid combo amp that has only instrument input, no line out no nothing else. So can I connect my DI box's direct link to amp's input, and connect my guitar to di box's input, and xlr output to interface's input and record di sound? Love your videos by the way, man!

Nice, I was looking for a singnal path to use external FX with my 2i2 and guess that this is the way to go. Also was thinking that maybe using the headphones output to do this could be a good way to keep the audio playback in real time. Thanks!

Hi from Detroit ! I have a question. I am buying this Focusrite you show here but did not show my exact recording situation. I play bass and my setup goes like this ..... Active Bass ---> Pedal Board --> Trace Elliot AMP with DI out on it. My amp is "Trace Elliot GP7 SM BASS PREAMP 300" and the DI out is part of the amp. My question is... How do I connect this to the Focurite? Do I just get a Female XLR for the amps DI and convert to 1/4" plug to go to the Focusrite? Or do I do XLR to XLR ? Im thinking the XLR on the Focusrite is for Microphones only? Im confused about the Focusrite XLR connection. Thanks for reading. EDIT : After Further research I found my answer but I will leave my question up there for others. In my situation I do this..... Bass Guitar > Pedal Board > My Amp that has a DI out > XLR to XLR cable to FOCUSRITE > Computer Happy New Year 2021

Thanks for the video. Can you use the headphone jack as the output rather than the monitor output on the rear? This would eliminate having to disconnect them if that will work. Thanks again.

Hey there! Nice video, but my problem is a little different. I'm running my recorded DI signal through the Radial reamp box into my amp and trying to mic the cab instead of running it back direct into the Focusrite. Every time I do, I get a feedback loop through my mics (Reaper is my DAW). I've tried turning off monitoring on my armed track to avoid a feedback loop and the problem continues. I've also tried to change the output settings in the Focusrite Control software with no luck. What would you recommend? EDIT: I should also mention that I'm running my two mics through a ART Digital MPA II Preamp before going into the Focusrite. Not sure if that makes a difference and I've messed with the settings on that as well and there is still feedback.

I`m very new to this. Please. how did you get the DI signal and Guitar signal in different tracks. I`m using a DI box + Interface + Amp + Reaper (DAW). I don`t have a reamp box.

so, if you dont have a "reactive load" ??

Hi Euge! Awesome video brother. Just what I have been looking for. Does the signal that comes out of the Marshall need to go into reactive load unit or can you bypass that and go from the Marshall right into the interface? Thank you.

That was helpful thank you. I noticed when you reamped into the Marshall, you used a reactivate load which I assume is a cab sim. Could you have just miced the cab from the Marshall?

Used the reamp method with a torpedo captor x, my question is it only recorded head amp with no speakers, does this mean i need an ir loader for the recorded reamp track? Thanks

Where is the DI peaking on the meters? I usual record at -10/12 and often find it lacks guts and tone. I found some DIs online which were -5 and work much better with amp sims.

Didn’t know the best video to post and ask this. But I’m just looking into recording some guitar at home (just to help me get better) and I know most of the pasty’s you’re get but. I’ve no idea when it comes to Apple Mac and the size of GB needed for it to work out ok. Can I ask what you know about this? Like I said random I know.

Great video! I was wondering though, it is still a little confusing for me. I am using a Behringer UMC22 for my recordings, I usually hook up my SM57 microphone to my Behringer and put it against my amp and play directly. So you showed two Radial products this video and I only want to buy a single one because I don't have a lot of money. | My goal is to be able to record a DI signal directly while also recording the amp via the mic live, then with the DI signal to be able to re-amp for better tone. Will the Radial J48 suffice for this, or do I need the Radial JCR REAMP instead? My behringer UMC22 only has 1 XLR input, 1 Jack input and two Jack Outputs.

Will the first method work when using audio interface with a pedal board and connecting it to a Tascam DP 32 SD for recording guitar effects?🤔

Thanks!

sorry to bother u again but i can't seem to find output options for individual tracks in garageband. it looks like ur using garageband and i can see that ur able to change the output for individual tracks. what am i missing? the research i'm seeing says that garageband doesn't have the option but it looks like ur using a way cooler version of garageband than i have. i am missing something f'sho! please help. thanks.

Hei Euge!Like your channel!

Hey Euge, thanks for your Video! Very instructive! Did you ever tried to reamp with a Mooer preamp instead an Amp? I know you like the preamps, and I tried it, but without any positive results…any Suggestions? Cheerz Rod

Hi! Do you disable the master track or you reamp with it on?

Thanks so much for this. I have been wondering how to do this process properly. What input level are you looking for around 12db?

Hi Euge, could you recommend a pair of speakers / monitors to connect to the RIVERA RockCrusher Recording attenuator / load box. Thanks

Great video, many thanks. I don't know what radial means but will the Palmer Daccapo do the job?

Can you only monitor with headphones since the monitor output knob is on full blast?

what if i dont have a loadbox?

Hi does the theoughput of the DI goes into the input of the amp? As in where you input the guitar? Or does it go to the line out of the amp? Thank you! Nice video btw!

Great video, thanks. I only have a passive DI box, would that work as a Reamp box?

thanks for this! learning using audio interfaces. I was looking at this one. I was planning on using a pedal board (similar to the one you use for live rigs) connected to the audio interface and to studio monitors. Do I still need the other components? or is ok, just guitar->pedal board->audio interface-> studio monitors (computer to record)

Hellou 😊 This was good ! Tästä sainkin idean kotistudioon. Mul on kans Scarlet 3rd generation.Eli siis kotioloissa voin nauhoittaa 5150 vahvarilla...?Puuttuu tosin nyt vielä reampbox,tarviiko vielä sen DI box?

Hi ! I am new on reamping, on 5:35 the trs jack is mono or stereo? I mean that the cable fron scarlett's outout to reamp box is balanced or unbalanced? Thank you very much!

hi. thanks for sharing. i am a bit confused about the reason for using a DI box instead of a re-amp box- is a DI box considered better than a re-amp box? or vice versa ? i'm borrowing a friend's re-amp but should i just go get a DI box? thanks

I just ran into a problem regarding levels. When I record a DI that has a wide dynamic scope, what sounds fine through the amp is unusable as a DI. For instance, if you ride your volume pot throughout the song, playing cleans with the volume on 2-3 and rhythm on 7-9 (like you would playing live), the dynamics of the DI range from -50 to -5. When reamping this signal through all the gear, the noise floor rises way too high. Is it not possible to reamp a guitar take with dynamics and gain controlled from the guitar the old school way? Cheers!

Hi and thanks for the video. How is the reamp box setup (any limiting to DI sig vol)? I was just wondering if this is possible without the reamp box (scarlett output volume control)?

Hello! My Focusrite 2i2 goes RED with the knob /all/ the way down straight from my guitar. Is that expected? What should I try?

Hi Man, Is there any way to reamping with using mooer radar without any reamping box or real amp? What do you think?

Hi Euge! Can I connect effect pedals between the guitar and Focusrite input and still record into my DAW? Does that work? Will the effect pedals still sound good? Or is there a different method to connect the pedals to record into my DAW? Thanks!

Its now mic level 12:20

Hi, do you have any problem with instruments input with hot pickup guita with Scarlett 2i2?because I'm interested in this audio interface but I have some guitars with loud pick up and I think it may clip at minimum gain.

Do you have to have a reactive load IR?

Hello, Euge! I have a problem with my recording guitar! All active pickups (EMG/Seymours) into scarlett 2i2 (1gen/2gen)...the DI signal is clipping and being compressed! even all levels on minimum! would DI-box help with this? Thank U!

Does the 2i2 only work for reamping through the right channel? I was pulling my hair out trying to figure out what I was doing wrong, have to create mono out buses. Thanks man.