How to Rebuild a Coleman Single Mantle Lantern Part III: Reassembly

Рет қаралды 28,802

Күн бұрын

Part III - Coleman Factory Warranty Center graduate Frank Bebb gives step-by-step instructions to rebuild a Coleman single-mantle lantern. (Time codes below)
Coleman Factory Warranty Center graduate Frank Bebb gives step-by-step instructions to rebuild or refurbish Coleman gas pressure appliances. Trained at the Coleman Factory in Wichita, Kansas, he brings what he has learned at "Coleman School" to you in his teaching videos. A long-time collector, former owner of the #1 selling Coleman parts dealership in the world, former owner of the Coleman Warranty Center and The Old Town Coleman Museum in Yucca Valley, California, and current owner/webmaster of The Old Town Coleman Center, Frank has authored much of the Coleman repair instructions you will find on the web today. His "Safety First" instructions with the ominous black widow spider, a real-life warning read by thousands, along with his other written works can be found on his website.
Frank is now your host on the Old Town Coleman Video series, follow him for all the tips and tricks of the trade he has learned along the way.
For additional guidance, original manuals in PDF format, Parts illustrations, photos, the “Spit and Whittle Club”, valuable links, and so much more, go to:
www.OldTownColeman.com
😎Looking for gear, find it here! We have more than just t-shirts, check out our wall art and stickers!
old-town-coleman.creator-spri...
More Old Town Coleman on the web…
Link to the OTC Facebook Page: / oldtowncoleman
OTC on Instagram: / oldtowncoleman
OTC on Pinterest: / oldtowncoleman
Keep ‘em Burnin’!! 🔥
Timecodes
0:00 - Intro
0:21 - Old Town Coleman Intro
1:02 - Assemble a Coleman Single Mantle Lantern Valve Stem
4:11 - Assemble a Coleman Single Mantle Lantern Valve
6:21 - Adjust Tension on a Coleman Single Mantle Lantern Valve Stem Packing
8:37 - Do I Use a Thread Sealer on Coleman Lantern Valves?
9:44 - Install a Coleman Single Mantle Lantern Valve in the Fount
10:00 - Clocking to a Coleman Single Mantle Lantern
11:28 - Install a Check Valve into Coleman a Single Mantle Lantern
12:46 - Install a Coleman Pump in a Single Mantle Lantern
14:35 - Coleman Fuel Filler Cap assembly
15:20 - Pressure Test a Coleman Lantern Fount
15:58 - Frame Rest install on a Coleman Single Mantle Lantern
17:49 - Generator install on a Coleman Single Mantle Lantern
19:12 - Lantern Frame assembly on a Coleman Single Mantle Lantern
21:48 - Install a Frame on a Coleman Single Mantle Lantern
24:35 - Install Mantle on a Coleman Single Mantle Lantern
26:30 - How to Listen to a Coleman Lantern Generator
27:21 - Lighting a Coleman Single Mantle Lantern
28:46 - Installing the Globe, Vent, Bale on Coleman Single Mantle Lantern
29:35 - Saying Goodbye with the Puppies

Пікірлер: 120

@davidbain973 Ай бұрын

Thankyou so much ,I just successfully rebuilt my wife's late father's 200a with this video series,was made Nov 1955,she is more than pleased to see it working again,brought back alot of fond memories for her from her youth up at big bear with her dad

@user-fu9vj9ix3g Ай бұрын

Best tutorial I've seen on just about any subject. Slow enough pace, no hurry-up editing, and no stupid music or idotic theatrics. Thank you. Now I can get to work on a 200 I just salvaged. After that, a 502.

@williamwilliams7706 4 ай бұрын

Thanks for this mini series. I would like to get my dad's old lantern running. With your videos and a few parts maybe I'll have a neat little lantern.

@oldssco 5 ай бұрын

Great stuff. Thank you for keeping such a wonderful piece of equipment alive and burning and for educating us to do the same.

@jerryberryhill3619 3 ай бұрын

Thanks Frank, what a thourogh walk through !!! I jjust rebuilt my 200A Birthday lantern using your tutorial and it came out looking and working beautiful !!

@edonghee Ай бұрын

Thank you for the good learning video. I would like to make you a suggestion. Among numerous lantern manufacturers, Coleman is the only one that maintains a lantern mass production system. Thanks to this, it is still possible to purchase new lanterns at a low price. I have owned NorthStar Gasoline in the past, We are currently using Premium Dual Fuel (285A), Powerhouse Dual Fuel (295A), Single Mantle (286A), and Kerosene (639C) lanterns. I live in Korea. In Korea, Japan, and China, 285A, 286A, 295A, 639C, and NortStar can still be purchased as new models at low prices. Please tell people who are still buying new lanterns how to maintain these lanterns. You could teach beginners how to maintain a lantern in an easy-to-understand way. That video will become a steady-selling video for a long time and will be viewed by many people. Some of those people will naturally grow up to be old Coleman lantern enthusiasts. And you will earn money from KZfaq.

@razorsharpbt124 Жыл бұрын

Thanks so much for this series, Frank. I received my 1967 200A today and was able to rebuild it and clean it up thanks to you. I'm a happy camper!

@OldTownColeman Жыл бұрын

Glad to help

@The762x39mm 3 ай бұрын

Very well done video Frank! I just finished up rebuilding a 200 canadian lantern. The threads on the burner tube and in the u tube were stripped. I used a little self drilling screw to hold the tube and u tube together until i can source replacements parts. Still the lantern light and run perfectly. As thread sealant for the valve body to fount, permatex indian head shellack work perfect and can be removed later if needed.

@JohnDoe-jc3cl 2 жыл бұрын

Old town- Thank you for your time, effort and knowledge here. I have a 200 a that I got from man in my fishing club. Stamped “200 A 53 “ on the bottom. I’m sure he used it many years fishing/ice fishing. I plan on doing the same, but with night fishing added. It’s been working pretty good, but started leaking at the valve stem. Through the power of you tube, and your knowledge, I know what to order and how to fix it, saving me some money. Thanks! Instant Subscriber. Period! Have a blessed and prosperous 2022, from Chicago

@aktrapper6126 9 ай бұрын

Best rebuild tutorial on the web......thank you!

@kurtak9452 Жыл бұрын

Frank, your Coleman videos are the absolute best....much appreciated......Thank-yor for your service....

@OldTownColeman Жыл бұрын

Glad you like them! You are welcome.

@marcp1180 3 жыл бұрын

I collect clocks, Occupied Japan figurines and lamps, glassware, kerosene and Aladin lamps, my house is full of treasures (yes I'm single). My buddy Jeff has a slew of Coleman lanterns and a few table lamps, now I have around 8 lanterns and two table lamps, so far. I can't blame it on you for my new addiction, but I ran across you here and you know your stuff! I mentioned a "genious Coleman guy" to my buddy and he said 'Oh, yes that's Frank...." I've just watched 1 1/2 hours on the 200a rebuild. You sir are a shining star. I no longer have to bug Jeff (also a Coleman guru) with all of my questions, I am learning from you too. Thank you, great channel.

@stevemccoy8138 27 күн бұрын

Think I can do it myself now. Thanks 😅

@TakeItEasy247 Жыл бұрын

I just want to let you know as a person that previously had no clue how to do any of this, you’re a fine educator. Thank you so much.

@OldTownColeman Жыл бұрын

I appreciate your kind words.

@curtiscf1986 3 жыл бұрын

Wilton. Best bench vice on the planet!

@OldTownColeman 3 жыл бұрын

She's a sturdy old girl!

@randykutzner5933 Жыл бұрын

Just bought a 200a and there’s a few tips I just got … thanks for the video and info.. keep it up 👍🏻 Coleman all the way..👍🏻👍🏻👍🏻

@65Watson 3 жыл бұрын

Great video, love your work!

@robroberts2048 3 жыл бұрын

Learn from the best

@OldTownColeman 3 жыл бұрын

Brother Rob I did, and I still have a photo of you sitting at my work bench in Yucca Valley. Love ya bro.

@Krankie_V 3 жыл бұрын

Excellent series- makes me more comfortable ripping down my lantern because I'm a lot more confident that I can get it all back together now that I know what all is involved.

@billroy2780 3 жыл бұрын

Such great videos! Thanks so much

@crabtrap 3 жыл бұрын

hey Frank, 14yrs ago or so, Oldtown was the first place i found help for rebuilding my Dad's 200a. I now have over 200 lanterns and stoves.....its your fault! LOL! I now restore/repair them as a side-hustle aswell Thanks

@OldTownColeman 3 жыл бұрын

Oh no, you can't blame me for that! That is awesome. Please send me an email and let me know where you are as I frequently get requests for lantern and stove repair.

@jeffsinger2805 3 жыл бұрын

Hey Crabtrap same here. I had my wifes father's old Coleman 220E It stopped working. I searched the net and found Oldtown how to instructions, The rest is history . I only have about 20 or so lanterns, but it is Frank's fault. I also repair and and restore for fun and profit,(very little profit) LOL!!!! But it keeps me home and out of trouble...

@crabtrap 3 жыл бұрын

@@jeffsinger2805 i think Frank should be obligated to pay all our divorce Attorney fees or atleast lantern haul-away fees after the wife murders us!

@may2888 3 жыл бұрын

You are THE Man!!,

@will.isaacs20701 3 жыл бұрын

Ooorah thanks for making these videos Marine! Semper Fi

@joseortega-us6rn 2 жыл бұрын

Thanks a lot Frank for sharing your knowledge, very well.

@davidleon3588 2 жыл бұрын

Once again Thank You for Sharing Your knowledge and experience they are very much appreciated.You have an excellent way of explaining and easy way to follow. Have a Blessed Day Brother !

@OldTownColeman 2 жыл бұрын

Thank you David, always glad to help!

@crissstewart697 3 жыл бұрын

I was frustrated with my two lanterns 285-700t and 200a. Thankyou for sharing your knowledge, with just a little cleaning and tlc they are both working well. The 700a is sweet!!! Your videos gave me the basics and gave me the confidence to fix em myself.

@OldTownColeman 3 жыл бұрын

Awesome Chriss, glad I could help!

@philipnelson4692 3 жыл бұрын

Great teacher, thanks!

@OldTownColeman 3 жыл бұрын

Thank you!

@keithsworld137 Ай бұрын

thank you

@jmfa57 3 жыл бұрын

VERY helpful, and VERY well done. Many thanks!

@OldTownColeman 3 жыл бұрын

Thank you!

@danielsmith5351 3 жыл бұрын

Very good video. Thank you

@OldTownColeman 3 жыл бұрын

Thank you!

@Andrew_From_NB 2 жыл бұрын

Great series Frank! Really enjoyed this and learned a lot! Really appreciate you taking the time to put this together for us! Will be taking your advice and tips and putting towards my next Coleman projects! Cheers

@danielouellette6788 3 жыл бұрын

Thanks for making these videos I have been collecting these for years and now just finding time in my life to learn the rebuilding process. Your videos are very helpful. Subscribed. Also love the mug Semper Fi Brother.

@danielgrenier3288 3 жыл бұрын

Thank you so much! ...amazingly well done suite of videos. Super helpful. Again, I can't thank you enough for sharing.

@OldTownColeman 3 жыл бұрын

Thanks again Daniel!

@jeffsinger2805 3 жыл бұрын

THANKS AGAIN!!! Best Coleman how to videos I have seen yet!!!!

@OldTownColeman 3 жыл бұрын

Thank you so much Jeff, I appreciate that!

@harabufarm8069 2 жыл бұрын

Terrific video's Frank, I just found a 237A 10 70 that my parents bought new, so these videos are very helpful, thanks.

@adolfojavierbustamantevega5633 Жыл бұрын

I just saw those three videos. Well done! Nice job and keep burning.👍

@OldTownColeman Жыл бұрын

Thanks 👍

@mitcha1065 3 жыл бұрын

Amazing! Thanks Frank! Now....time to get to work on my own 200!

@OldTownColeman 3 жыл бұрын

Go Mitch go!

@antdor2 3 жыл бұрын

muy buen trabajo.

@OldTownColeman 3 жыл бұрын

Thank you again!

@JerkRice 3 жыл бұрын

I found your website I while ago and found it very informative. These videos are great because they fill in the details that are not on the website. Looking forward to future your future videos. Subscribed!

@OldTownColeman 3 жыл бұрын

Thank you, more are coming!

@aigleperseverant 4 жыл бұрын

Thank you Frank - awesome rebuild videos !! When you do your stove rebuild videos, please show us how you remove those darn grate clips on a 426D or similar models.

@OldTownColeman 4 жыл бұрын

Ya know I was successful some of the time with those clips, using needle nose pliers and hitting the tabs just right. But it got to the point that if I was not going to replace them, I would angle the grate out of there by slightly torquing one of the arms, then bending it back in place when reinstalling it. What a pain!

@closedframe 2 жыл бұрын

i just cleaned the fuel pickup tube of my 1979 200a. The valve component is really tight and i have to use a hammer knock the end of valve. finally i rotated it down from the fount. After i finished cleaning the fuel pickup i found that it is really a nightmare to rotate it back. i need a vise! I want say thanks to you. The reassemebly video gave me a lot of help and idea. But i really dont want to disassemble it again. 这个视频超级棒，我希望看到我的留言的200a用户知道，一定谨慎拆装下油管组件，拧下来很费劲，我用锤子敲了半天才松动。装回去更费劲，再也不敢拆了。不过拆了以后，清洁完下油管后，灯的性能好多了，几乎不再有呼吸感了。重说三，谨慎拆装。

@gerhardenglert5956 Жыл бұрын

Sehr schön erklärt!👍

@michelleleitten3636 9 ай бұрын

Frank, your videos are phenomenal. Thank you so much. You have a wonderful delivery of knowledge without a hint of arrogance. You have great pacing…perfect. I really, really appreciate your videos.

@curtiscf1986 3 жыл бұрын

I have several lanterns myself. I would like to see a video on the 237 or maybe an older canadian 639. The majority of mine are kero burners. I also have a rare 242k kero burner that I absolutely love. I think the 237 is my favorite model of coleman lanterns. Great video!

@OldTownColeman 3 жыл бұрын

Kero rocks Curtis. More videos coming, soon...

@benkanobe7500 2 жыл бұрын

Thank you for this series. I have done a few 200As as I rebuild them for fun and give them as gifts and try to get some Birthday lanterns. I learned a lot and will be using vinegar going forward. Thanks for all the tips! I have the same lamp as you light in the intro. My valve packing leaks and it is unsafe to operate. Inspecting it, it is coils of thread with some sort of grease (chicken fat??). How do I properly replace the packing so I can enjoy my lamp as you do yours?

@okanbilici1909 11 ай бұрын

Nice work, well done. I have two Coleman 237 lanterns. No hood and glass globes :(

@blackdogbite 2 жыл бұрын

Frank....thank you so much for sharing your valuable knowledge with us. Sincerely appreciated and prevented me from making a hundred mistakes. BTW....what does PAL nut.mean? Is it an abbreviation? A cheap stamped nut seems like such a cheesy way of fastening the entire burner assembly.....which includes the vent and the bail! So all the weight of the fount is on that little bit. Wouldn't a standard nut be much better? One last question....do you ever nickel-plate the burner frame? They rust so easily with all that heat

@mikedouglas9535 2 жыл бұрын

Frank, I have a Coleman I believe a 252 mil spec lantern 1958 that is a single mantle that ran on leaded gasoline that has not been lighted in 50 yeaars. Would like to find out how to check to see if it needs to be rebuilt. Have you done video on how too on this latern. I subscribe to your channel about 6 months ago and like all the video's you do and the lanterns you show and rebuild. Thanks Mike

@coltius 2 жыл бұрын

I just finished restoring a 200A with the significant help of your videos but one question so far: How loose is the globe supposed to be? I have the original Pyrex globe (cracked unfortunately) and a Chinese one that are the same size and I can easily lift them up so that the bottom edge is even with the top of the metal frame cup on the bottom and it allows it to rattle around. I know these can't be really tight due to thermal expansion but am I missing a spring holder to stop the rattle or are they just this loose? I looked all over and couldn't find a good answer for this.

@deathb4digital 3 жыл бұрын

Excellent tutorial! I’ve rebuilt a couple of Canadian model 200 with good success. I didn’t see the frame spacer washers on either of them. Do you know if they should be there or were they only included on the USA made model?

@OldTownColeman 3 жыл бұрын

I am researching that exact question...not sure yet.

@steelparkeroutdoors 3 жыл бұрын

Great videos! you mention gasoline fuel, are you using regular gas or coleman white gas? also where is the best place to order parts from? Thank you for sharing your knowledge with us.

@OldTownColeman 3 жыл бұрын

Hello, great place to order is www.oldcolemanparts.com and I always use regular pump gas. I'm doing a video on that right now...

@royallan3717 3 ай бұрын

Hi Frank,could you tell us what size mantle the 200b uses? I’ve had trouble blowing the bottom out when lighting today and I think it had pressure already from storage and I pumped more into it.what is the purpose of the 90 degree valve opposite the knob valve? Thanks for the video

@plumpye474 3 жыл бұрын

Awesome video Sir I just recently got my 1st 200A Burgundy but it’s a 9-61 is the a way to for sure find out if it’s a Burgundy it looks like it to me and other collectors also what is the Best mantle for my 200A ??

@OldTownColeman 3 жыл бұрын

Put a #21 mantle on it and let 'er rip! It would be easy to repaint a fount, but not to re-porcelainize the ventilator. That month/year should be a very deep burgundy.

@benkanobe7500 2 жыл бұрын

Frank, how do we remove the old sticker/decal as there are now so many sources for quality replacements? I have considered putting the new over the old but that just does not seem ideal. Your thoughts please??

@abbyfogg7536 3 жыл бұрын

Thank you for your video! I have a 200A half apart and was was wondering how that ecentric on the generator cleaner worked! Where do you recommend getting parts? Im missing a 200b4891 or 200c4891 globe base rest?

@OldTownColeman 3 жыл бұрын

Abby, hello. When you turn the tip cleaner stem, the opposite end has a bend in it. This bend fits in a slot on the eccentric block. With that bend going up and down as you turn the stem, the up and down motion causes the eccentric block to also go up and down. Remember that you do not need to remove the tip cleaner usually, and probably shouldn't if it does not leak or bind. Parts can be found at oldcolemanparts.com. Thanks and talk soon! Frank

@joemama22 Жыл бұрын

You might consider using an ultrasonic cleaner... The inside of valve parts and other miscellaneous tubes will become absolutely clean... Mix water with a citric acid like Lime-Away... I have been restoring generators this way for years... And it works fast.

@OldTownColeman Жыл бұрын

A toy that is on my list for sure. Most out there do not have access to an ultrasonic cleaner so I first try to show the "analog" way of doing things. I don't show me using my bead blast cabinet for the very same reason. I hope to showcase the big toys in future videos.

@jimdent351 4 ай бұрын

I have a question about the table lamp you light at the beginning of the video. Should there be an additional globe type glass under that big shade? I've got my eye on one of these lamps but I'm not sure if it's complete. Thanks!

@lylebrink5342 4 жыл бұрын

very informative video. Do you do stoves also?

@OldTownColeman 4 жыл бұрын

Lyle, I absolutely do and will be taping a 425 rebuild this week/weekend. That will be followed by a 500/502. Thank you for the comment, I'm glad you liked it.

@donwatson-kk5zs 6 ай бұрын

I have several of both double and single mantle typed. When any of the double mantles are on. They have no oder; just nice heat. When any of the 200A lanterns run, they always have a slight odor; as if they are running too rich. Any comments or advice ???

@lorettacaputo6997 Жыл бұрын

On a well functioning small, single mantle Coleman white gas lantern, how long should the mantle burn brightly before the fount needs to be pumped up again. This is considering that the there is no leaks of air / gas anywhere else than it should be going. Is that burn time related to the size of the fount or just the volume of the fuel in the tank with a longer run time as the fuel level drops and there is more air space to be pumped up?

@chomp54321 Жыл бұрын

I have acquired an old Coleman Lantern that has rust spots on the ventilator. is there any way to repair or restore that damage? Even if I sand them down, I understand that paint cannot stick to porcelain, so what can be done at least to prevent the rust from coming back? Thanks.

@tom7073 Жыл бұрын

Great series Frank! Just got my first lantern, a 200a. I noticed that after you rinsed the fount out with water, you rinsed it with denatured alcohol. I have 91% isopropyl alcohol. Will that work as well? Thanks in advance!

@OldTownColeman Жыл бұрын

No, Isopropyl alcohol will not work as it has water in it. Use only denatured alcohol.

@Chungustav 3 жыл бұрын

Only part I got stuck on was the replacement generator was too large for my 1957 so I had to burn it out a reuse it. I guess there are different sizes?

@117bd Жыл бұрын

Sir i have a 220E lantern, could you tell me the size threads on the 220-3301 burner tubes?

@tomwoods1373 2 жыл бұрын

Hello, I just bought one of these from an antique store. Seems to be in decent condition. I'm going to go through it as you did following your instructions. One thing I can't figure out how to fix is that the globe is really loose. Even when I tighten the nut down on the top. Any suggestions? I know my newer lantern have small spring under the globe to keep them tight. Am I missing something? Thank you and great job on the videos.

@OldTownColeman 2 жыл бұрын

Tom, how loose is really loose? They are not intended to be tight in there--not at all. Are you sure you have the correct ventilator on the lantern? That could result in an over-sloppy fit of the globe.

@Farron1960 3 жыл бұрын

plz do a rebuild on the 288A lantern with the plastic eccentric block.

@OldTownColeman 3 жыл бұрын

Farron, I have been thinking about that. I need to do stove videos next but I can do one by January or so. Thank you for the request!

@jamessix60 3 жыл бұрын

Replaced the generator and only getting a very slight hiss on a 200a. Pumpsurises very quickly. Any advice?

@OldTownColeman 3 жыл бұрын

James I'd start with the check valve as your pump is rising quickly and that isn't good, and could mean you are not getting enough pressure into the fount. Once you get that cleaned up (see latest video) then you can see if it is something else. email is info@oldtowncoleman.com if you need help.

@happyhome41 3 жыл бұрын

Frank, love the intro -- what is that beautiful lamp you light, and the music riff -- and gorgeous model move with the look back over the shoulder. So, do you work on items for a fee ? While I realize Coleman offers their $55.00 'return to service' offer, but they are explicit in their caveat that they will NOT put in the TLC you show in in your videos.

@OldTownColeman 3 жыл бұрын

It is an old Sunshine Safety lamp that is just beautiful. I no longer can do repairs for others due to liability issues. I'm not sure if Cliff and Roger are still in Wichita rebuilding stoves and lanterns--the made sure when it left their shop, it was right. Hopefully this is the same practice as today.

@snowpeaky 3 жыл бұрын

I have a question regarding the frame washers. On my Canadian made 200; only the centre frame mount has a grove for a washer. The generator side does not have a grove that will hold a washer. Does the frame just "float" on the generator on my 200 (1966 year)? Also, the frame nut on mine is a brass wing nut; is this correct? Thanks Frank!

@OldTownColeman 3 жыл бұрын

Can you send photos please? info@oldtowncoleman.com. I don't have a Canadian 200A here...

@pedropadilla1355 7 ай бұрын

Hi I just asking a question on a1954 colman 200A how much would it cost to service it thank you in advance have a great night.

@teridacktaljones4553 3 жыл бұрын

New at this game , is the check valve on a 200 lantern the same as on a 321B, his video is great for learning about this lantern thx.

@OldTownColeman 3 жыл бұрын

Sir yes it is. Thank you very much!

@teridacktaljones4553 3 жыл бұрын

@@OldTownColemanThanks for the comeback, and great vid

@angelinsox1962 3 жыл бұрын

We have a Coleman 220h one of the burner screens is missing. Our burner cap is frozen on the stem and we can’t get it off. We have penetrating oil on it over night, it’s no better and it’s still sitting. Would be able to give some advice on how to remove this cap? Thank you

@OldTownColeman 3 жыл бұрын

Hello, I responded to this on the filler cap thread! Thank you!

@okanbilici1909 11 ай бұрын

Do you have a chance to get a head and a globe?

@garymckinley6974 3 жыл бұрын

Is the gas tube on a 225A700 single mantle removable?

@OldTownColeman 3 жыл бұрын

Not sure what a 225A is Gary...?

@stamperknives9783 2 жыл бұрын

Just a quick question after removing the frame from the globe and removing the rust how do you protect it from rusting again

@kurtrussell5228 2 жыл бұрын

...... you don't

@stamperknives9783 2 жыл бұрын

@@kurtrussell5228 yeah I figured

@williamhudson2339 2 жыл бұрын

Hi, Have an old one . 41 to 50, what part do i need for a rebuild on 242C, single mantel, list?, and is the fuel gas or kerosene ?

@OldTownColeman 2 жыл бұрын

William, what is wrong with the 242C, or are you just wanting a rebuild parts list? The 242C is a gasoline lantern. Thank you!

@williamhudson2339 2 жыл бұрын

@@OldTownColeman Have not tried it out yet, looks purity dirty , rather be prepared , parts list, plan on buying them from your web site.

@Sefaeskici 2 жыл бұрын

Generator code ??

@anthonybarkasysr5029 3 жыл бұрын

I would like to know what is your thoughts on using a #20 mantle on a 242 lantern instead of a #21A mantle . The Coleman package of #21A mantles doesn't even list a 242 on the bag. I know the #20 s are for the smaller Peak backpacking lanterns. Could I use either or what mantle was originally called for on a 242? Loved the videos. Keep them burning 🔥 Sunshine 🌞 of the night.

@OldTownColeman 3 жыл бұрын

Anthony, hello sir. I've never thought about using a #20 on a 242 lantern--not sure why you would. Mantles are intended for the candlepower output of the lantern and the #20 is for compact lanterns like the 222 series as you mention. I'd stick with the #21 mantle...