Thanks! Your video helped me figure out how the float and metal cage go together, after not noticing before taking it apart!

I watched your video to see the strainer and gaskets. Out of 4 videos I saw no one seems to realize there is a gasket inside the strainer screw/housing. I was wondering where it went or if I needed it (as it is in the parts diagrams), but no one showed this in their videos. Thanks for being thorough. Liked and Subscribed :)

Very nice! You should make a video of putting it back on the boat and adjusting the RPM.

Hey man, appreciate your effort. But you left a lot of steps out for those of us that are trying to do this the first time....

Thanks Chris, helpful video 👍🏻😎

Nicely done, great job !

Hi Chris, I bought your bridgeport cnc conversion plans many years ago, I have still not done the conversion! I recognised the "Slideruleracer" name.

Awesome vid. I'm working on rebuilding mine right now. Let's Hope it solves the dead spot I have Between 2k and 2.5k rpm! Thank you!

Nice video. I'm a impact driver nut myself. Best tool ever for breaking free painted over screws. Just wanted to know why you didn't take out the check ball, spring and T under the the venturi? Assume your's doesn't come with the check ball under the acc. pump. but some have one there also. Overall great video with nice editing to keep it very informative.

I watched vidio have to say very impressed

Thank you this video was very helpful good job!!

Helpful info thanks

Hey man, appreciate your effort. But you left a lot of steps out for those of us that are trying to do this the first time...i needed to know where to set the float but you left that out and you showed it at wrong angle

Did you put both pieces of the carb or just the main body in the Chem Dip and ultrasonic cleaner?

Chris, since your video is only 10 min since you did a lot of FF'ing, do you have an actual time for the process?Since carb was already removed I don't need the removal time just the actual rebuild time. I'm in the business but can't afford to buy a Mercruiser book for every Merc to get all the flat rates times lol. I'm guessing about 45m-1hr rebuild/clean time? Thanks, good video.

Before I get too old I would just once be able to rebuild a carb. Tried it on a honda 750 bike once.. complete failure. Now my Bayliner merc 3.0 is acting up, difficulty with start on hot engine and dieseling.

Ad. There should be a small ball that you’re missing during reassembly. Thanks

What is that little white L-shaped ruler at the 7:00 mark used for? I found one in the glove box of my new-to-me runabout, and have held onto it just because I figured it was specific to a watercraft or its engine somehow. Thanks

I think this is a typo on the carb kit. Its 3302 not 3320.

hello everyone I need a little help, I have a problem with my carburator it keeps poring fuil in the chamber what's would it be the best way to fix the problem.

Yes and what did the rebuild kit say. As you do it and say mysterious adjustment.

Hi Having some issues getting the power valve out of the top part of carb. It is not staked over nothing restricting it just wont come out if the bore. Any ideas. Thanks.

Hey Chris, my kit didn’t come with a spec sheet. Do you recall the float spec for the 4.3 mercruiser?

Hi! Do the throat linkage and the accelerator pump connect at all??

Hey Chris- What kit did you buy? Did yours come with a new float? I have a Mercruiser J1223. Thanks!

Spring goes inside filter

Hi, I have one of these carbs that I am trying to rebuild. The accelerator pump seems to be holding the two halves together. I am afraid to brute force it apart, is there something down in the accelerator pump that could be holding it together that I need to disassemble first? My engine is a Merc 3.0 140 4 cylinder but the carb looks exactly the same. Thanks in advance.

I have a 79 sun runner. it has the merchant just like this video. around 1500 rpms it smell rich and dies Everytime unless I push through it (full throttle) and pull it back again. it only does it under a load. I have had the carburator cleaned and put backed together. do I need a repair kit at this point or is this a different problem?

Hi, im planning an rebuilding my 4.3 carburetor this spring. How many turns did your guide suggest for your mixture screw from bottom?

what lead you to rebuilding the carb? was the engine hesitating and stalling on you? or you just knew better with today's gasoline? i'm having trouble with my 04 mercruiser 3.0 same carb. hesitating and stalling on me.

Where did you get the spread sheet on the carb that’s in the corner of vid ?

hola que altura lleva la boya en mm

What make of Carb is that? Does Mercruiser make there own? I have an '89 Searay, 4.3 Liter Mercruiser and the carb looks the same but I don't know how to positively ID it to get the right parts for it.

Hello, greetings from Argentina. Can tellme if are other carburetor that use same gasket? .In my country is really hard to find Mercarb brand.

There are so many different kits online which would you recommend?

Hi Chris I have same exact carb that I need to rebuild hopping won't be 2 bad. I wanted to know what did you dip the carb into what's the liquid called mine it's pretty bad

Hello, what size ultrasonic cleaner do you use please. Im going to purchase one. THNKS

Can I send you my sae j1223 carb it's the same one? How much would you charge to rebuild it just like you did in the video

Hi can u make a vids Please how to put it back on a boat and do adjustments plz

What if there was debris in the filter ? What would u do ? There is some sand like debris in my filter .

Nice video. well I rebuild my carb and still have a over flowing I'm not sure what else to do someone please help ???

Too less details.. 😢 I can See, some Parts arent used, but thats Not clear which and why

where do i get the link to this kit rebuild parts

I have the same carb. Can I send it to you?

Where did you buy the gasket?

video not intended for a novice with a million questions

where did u buy the rebuild kit

how do you tighten up the choke?

I had to put a dislike on this video. This is only a partial rebuild and cleaning. I followed this and discovered I had a torn accelerator pump cup washer. I am not a mechanic, but a computer tech. Seeing you stop where you did in your video helped me to decide to stop there as well. After all, I found the torn cup washer on the accelerator and since my accelerator pump had quit working I had obviously found the problem. Well of course I put my carb back together and the boat still is exhibiting the same behavior. After trying a few things with the timing and the ignition system I finally look down the throat of the carb to find that the accelerator pump still is not pumping streams of gas down the throat of the carb. I watched another video that was a complete tear down. I pulled my carb and while tearing it down paid close attention to the pathways that seemed to be for the accelerator. I found to holes in the body of the venturi that were where the gas from the accelerator shots out. These happened to be clogged. I was able to clear them and now the motor is running great! I wish I had watched the other video first. It was a thorough tear down, not just a partial. For a non-mechanic like myself, seeing the full rebuild helped me understand the workings of my carburetor and trouble shoot the entire problem I had. Calling this video "How to Rebuild..." is a bit of a joke, because it is so very incomplete.

I know this video is like 7 yrs old, but I think you have two numbers transposed in that carb rebuild kit number. Should be 3302-804844 ?