Great tutorial, camera work close up showed all the steps in great detail and the simple,straight forward instructions made everything I need to do clear, thanks for putting this out there, ride safe.

Pretty excellent little video! Thanks!

well made instructional video. i will be doing mine as soon as the kit shows up. thanks

You still the man.. this is what I needed to do my leaker. And excellent tutorial.. no freakn music and straight instructions. Keep the greasy side down brother. 👍👌

Thanks for sharing your experience . The best tuto I have found about pingel petcock repairing !

Cool video, you can also send it to them and they will rebuild it for $28 bucks

Good, useful video. I got a chuckle at the VERY end, where you were looking for the "off" button... you said what I say at times like that :) Thanks again!

Definitely a great video as far as the visual for the inside working parts especially when it comes time for reassembly. But you could simplify it a little bit by cushioning the big part of the valve in the vise with cardboard or rag and doing everything like that instead of trying to hold the little part of the valve. Not criticizing just adding a step to make a little easier but it's always more than one way to skin a cat. The video definitely helped me because I couldn't find anything on these valves either and the visual was the most help ful part thanks bro.

Nice job, 'bout time someone did it.

Awesome video Bro. You motivated the hell out of me. I just bought the same petcock, installed it, filled up my tank, attempted to start my bike and nothing. The valve was facing the wrong direction and the orifices were completely obstructed not allowing fuel to leave the fuel tank. I watched your awesome DIY video, removed the thumb handle, spun the valve around in the correct position and reinstalled the thumb handle. I can see orifices in the fuel outlet nipple that I couldn't see before. I originally thought someone on the production line forgot to drill the orifices. Where in the hell is the QC at Pingel? This is the second defective Pingel petcock that I have purchased. I'm really starting to wonder about that company. Thanks again Bro for the kick ass video.

Great vid. I’m tempted.

Great video! But I just called pingel directly and they said they would completely rebuild the petcock and pressure test it for 18$ if you mail it to them! No problem no.

Very helpful!

Bro u rok, thanks 4 taking the time 2 do this. mine has bin leaking 4 a long time

Could you give me the part number for the kit. And where you got that I would very much appreciate that thank you and your video was excellent

Thanks for help me!! from Brazil, is hard to find this petcock here!!!

Great job, thanks!!

Thank you for the vid.

Thanks for this

Great video thanks brother!

Much appreciated. I need to rebuild my pingel when I turn the gas on, I get a drop or 2 on my hand.

Thank you

This is great thankyou. Mine has been smooth but tight to turn for years but suddenly feels a lot loser to turn. It still has some resistance but it's a lot loser than before. It looks like new o-rings would tighten it back up again?

YOU CAN ' TAP THE *VALVE HANDLE / WITH THE ROLL PIN " BACK IN WITH A **SCREWDRIVER ** HANDLE ** AND YOU WONT SCRATCH IT UP THIS WAY

Thanks for the video. Where did you get the rebuild kit? I tried cycle shop where I bought it years ago and they said you cant rebuild it 🤦🏽‍♂️ i knew better but pingel site only shows large kits like for resale thanks

Great video..where can I get the o rings

Great video and makes it a 15 miniute job...now i need a link to the rebuild kit...anyone???

Great video man, thanks. I can not find the rebuild kit you used, the only one I can find is more expensive than a new petcock. Do you have a part number for the one you bought?

Good video. I'm going to replace my stock petcock, but I'm confused. My FLHR is a vacuum petcock and I'm wondering how a Pingel would even work as it looks like gravity fed.

What rebuild kit did you use

I can't find this O ring kit anywhere. The Pingel rebuild kit lists at over $100. Where did you get this?

Got a no-name Pingel knock-off on my bike. Probably not rebuildable.

Where do I order the kit please

I cannot find the kit that you used in this video. Can you please send me a link? I’m working on the peacock as we speak. Thanks

Nice tutorial man. Too bad a pingel petcock rebuild kit is so ridiculously overpriced. $100.00 for some o rings, screen, loctite and fricken toothpicks is crazy especially when you consider that the most inexpensive pingel petcock is $120.00 per their MSRP. Yea they are excellent petcocks but the rebuild kit is near the cost of just replacing the whole thing! Pingel will rebuild it for more than the original cost of your petcock so that also a crap option. Also, for what you pay for the rebuild kit no included instructions is more ridiculousness from Pingel it’s insulting!

Where do you get the rebuilde kit ?

Buy a rebuild kit when you buy the petcock. Mine lasted 6 months with nonethanol fuel......junk!

At the price you have to pay it shouldn't ever ha e to be rebuilt wtf are they charging almost 300 bucks for one of these is just stupid 😮