How to: Rebuild Be Pressure Whirl-A-Way Swivel

Рет қаралды 37,137

Күн бұрын

This video in our How to section teaches you how to rebuild a BE Pressure Whirl-A-Way Swivel. Complete breakdown. for more information please see:
www.jnequipment.com/shop/bran...

Пікірлер: 64

@GuardianPressureWashing 2 ай бұрын

Loosening that vault screw was crazy. I had my surface cleaner in a leg lock, leaned back, and used my full body weight to get is loose 😂 Thanks for the video.

@johnjacobjingledingleberry9769 6 жыл бұрын

Dude, great video! This subject is NEVER done. Thanks bro

@tshirt2009 8 жыл бұрын

Thanks for the great videos. They are very informative and easy to understand. I will soon be starting my own pressure washing business and your videos have helped me prepare for setup and repairs of my future equipment.

@Spraywell 8 жыл бұрын

+tshirt2009 thanks! we are always working on making more so stay tuned!

@jasonhewlett2913 3 ай бұрын

That was a big help thank you

@rabbitskinner 3 жыл бұрын

Thanks buddy

@yubtypin 3 жыл бұрын

Just a helpful tip, all there is to rebuilding a swivel like this are replacing the two bearings and oring. You can get a 4 pack of png bearings 6302 2RS for around $10. Just fyi.

@bidders77 2 жыл бұрын

Love this thanks!

@jaypemberton8253 2 жыл бұрын

Do you know what size o ring?

@yubtypin 2 жыл бұрын

@@jaypemberton8253 I usually just match it up at home depot. That's where I buy all my orings for the hoses and tips. Not the colored ones in the pressure washer section though. Go to the plumbing section for good quality orings.

@marcosespindola941 Жыл бұрын

@@yubtypin hey man are these beatings higher temp rating? I want to be able to use mine with high heat

@yubtypin Жыл бұрын

Good question. I have no idea.

@mtraven23 3 жыл бұрын

im trying to build one of these, having a bit of trouble understanding how it functions....during use (ie when pressure is introduced), that carbide seat, doesn't it compress the spring & break the seal? then does the sealed chamber just fill?

@pablochavez1997 7 ай бұрын

Thank you very much for your help. Where I can get the kit ?

@jameshousden2115 3 жыл бұрын

How big is the spring diameter and length.

@MonkaW1234 Жыл бұрын

iv got water coming out that little whole close to the middle under side. any clues any1?

@mrsparklewindowcleaning679 7 ай бұрын

I lost the spring damn it ! Do you know by any chance what is the size and specs of that small spring !! Thanks in advance

@jjgag601 6 жыл бұрын

i went ahead and used a socket to loosen the piece that is on the end where the two notched piece goes in . Now it is time to put it back together and it looks like it had some type of sealant what do you recommend i use to seal it back together.

@Spraywell 6 жыл бұрын

I do not believe any sealant is required. the "notched" piece should sit in the hole(where the spring is) and the 2 notches should align with the 2 pegs.

@duartepaintinghandymanservices 5 жыл бұрын

was the whisper equipped with a different cartridge housing in the past? mine seems to be different, it doesnt unscrew to remove the cartridge upward, it requires mine to be push downward instead

@Spraywell 5 жыл бұрын

if this is regards to a WHISPER WASH unit which is not featured in this video than yes, there are 2 different types of swivels. The newer Series 3 swivels are GREEN and the assembly pushes up, the older black swivels have to be taken apart one piece at a time.

@duartepaintinghandymanservices 5 жыл бұрын

JN Equipment yes I figure it out, those new ones are so much easier than what I have

@xDeadlyNiNjA23x 6 жыл бұрын

I need to replace the seals in mine are these the steps I need to do to replace them?

@Spraywell 6 жыл бұрын

This swivel has a "MINOR rebuild kit" and a "Major rebuild kit" there isn't a seal kit.

@TheMark311069 6 жыл бұрын

Hi having problems getting the bearings out of the housing. Any tips

@Spraywell 6 жыл бұрын

Bang really hard! try using PB blaster and let it soak to loosen them up. Lots of time it's just dirt and/or grime holding them in place.

@Gezuzu23 2 жыл бұрын

Could you use break cleaner or WD 40 to clean that swivel housing.

@MannyAguilarJr Жыл бұрын

Just be careful with any o-rings or plastics when using brake cleaner. Do it without them present in the housing.

@michaelc7283 4 жыл бұрын

What type of grease or lubricate do you use for this type of surface cleaner?

@Spraywell 4 жыл бұрын

Multi Purpose Marine Grease.

@mab123080 5 жыл бұрын

I have a simpson surface cleaner, almost identical to that.. Do you by chance have other videos that may show more detail for that model? I've searched for this and can't find the simpson version? Great video, thanks!!

@Spraywell 5 жыл бұрын

The Simpson surface cleaner is identical to the General Pump surface cleaner. what's your question? email me direct @ sales@jnequipment.com

@Spraywell 5 жыл бұрын

kzfaq.info/get/bejne/f62Zecd50tKucWw.html check out this video

@TheGravygun 9 ай бұрын

Hey I have excessive water coming out of the hole on the bottom right above the spray bar what does this mean?

@cendricwerleman3443 4 ай бұрын

Mine is doing the same how can i fix it ?

@whitedime 7 жыл бұрын

is there a small washer that contacts the spring

@Spraywell 7 жыл бұрын

@whitedime 7 жыл бұрын

Aight

@westbellfort6200 2 жыл бұрын

What would cause the cleaner to leak from the weep hole??

@Spraywell 2 жыл бұрын

The seal kit needs to be replaced. The seals are wear and tear parts and over time they simply need to be changed. Like tires on a car. Even if they remain unused, they can simply dry rot over time. With enough use they simply wear out.

@Larry.Luciano 4 жыл бұрын

I believe mine is a whirl-a-way as well but yellow... sound right? My swivel has a wobble to it but not leaking water.... I’m assuming I need to do what you did in this video?

@Spraywell 4 жыл бұрын

It it's "shaking" when you spray but it still spins (but maybe slower) then I would first check for debris at my spray tips. If it spins freely while not hooked up but "locks" completely while under pressure then rebuild the swivel

@Larry.Luciano 4 жыл бұрын

JN Equipment I brought it to my local shop, they said it might have a cracked bearing, wobbles... The bar was bent as well. Replaced the bar and it sped it back up but still need to do what you did in this vid. Do you sell the bearings for a 20” whirlaway?

@Spraywell 4 жыл бұрын

@@Larry.Luciano We sell the entire cartridge here: www.jnequipment.com/shop/brands/be-pressure/85790010-be-pressure-18-24-inch-whirl-a-way-swivel-repair-kit/ use this coupon code (one time use only) NEW2019 for a 5% discount off your entire cart.

@Larry.Luciano 4 жыл бұрын

Ok. How do replace just the bearings? I have mine apart. Bearing press?

@Spraywell 4 жыл бұрын

@@Larry.Luciano that's your best bet

@decarlosgist2250 2 жыл бұрын

Would this rebuild be the same as a 20 inch BE surface cleaner? If so where did you get the rebuild kit?

@Spraywell 2 жыл бұрын

Hi - Yes, the major repair kit used in this video can be found here:

@Spraywell 2 жыл бұрын

spraywell.com/be-85-790-010-swivel-repair-kit-for-18-24-whirl-a-way/

@Spraywell 2 жыл бұрын

This repair kit will work for 18 inch, 20 inch, 22 inch and 24 inch Whirl-a-way surface cleaners.

@trekinbuddy 4 жыл бұрын

If water is blowing out the hole on the bottom of the swivel does that mean the O ring is bad?

@Spraywell 4 жыл бұрын

yes, that is the "weep" hole and if water is shooting our of there but your bearings still spin well then you need the minor rebuild kit.

@trekinbuddy 4 жыл бұрын

@@Spraywell Do you sell that?

@ShadowTetsuo9999 2 жыл бұрын

I have a mi-t-m 20inch surface cleaner , the swivel almost looks like this but has two holes at the bottom , when u pull the spray trigger water comes from the spray tips AND the two holes at the bottom of the swivel . Is that a sign that it needs repair or replaced? This was a hand me down lol

@Spraywell 2 жыл бұрын

Mi-T-M models could be identical to the Whirl-a-Way seen in this video. If your model has this same swivel what you are seeing is water leaking out of the "weep holes". This is to let you know you need to replace your seals inside the swivel. At this point you have 2 options. To repair ONLY the seals, you could order part #85.790.001 found here :

@Spraywell 2 жыл бұрын

spraywell.com/be-85-790-001-swivel-minor-repair-kit-for-18-24-whirl-a-way-surface-cleaners/

@Spraywell 2 жыл бұрын

To repair the seals & swivel (full rebuild) you could order #85.790.010 found here

@Spraywell 2 жыл бұрын

spraywell.com/be-85-790-010-swivel-repair-kit-for-18-24-whirl-a-way/

@ShadowTetsuo9999 2 жыл бұрын

@@Spraywell thank you so much