How To Rebuild Drum Brakes | 1990 Ford Bronco 1980-1996 F150

How To Rebuild Drum Brakes | 1990 Ford Bronco 1980-1996 F150 | Bronco Restoration

Рет қаралды 35,565

3 жыл бұрын

Hello,
This video shows how to rebuild your drum brakes on your car or truck. The vehicle in this video is a 1990 Ford Bronco, (1980-1996 Ford Trucks and Vans). Most vehicles have similar Drum brakes and you can use this video as a guide to do yours.
Tools needed:
-Jack
-Jack Stand
-Drum Brake tool kit (2 pieces)
-Lug Wrench
-Flat Head Screw Driver
-Needle nose pliers
New Parts:
-New Brake Shoes
-New Brake Drum
-New Self Adjuster Kit
-New Spring kit
Links:
Drum Brake Hardware:
amzn.to/3xo5nN9
amzn.to/2VsLzex
amzn.to/3rSIikH
Drum Brake Tool Kit:
amzn.to/3fx758U
amzn.to/3lxbI6H
Jack:
amzn.to/3yrXGXJ
amzn.to/3yqAzwC
All The Parts Your Car Will Ever Need:
www.rockauto.com
Please remember to like and subscribe, Thank you for watching!
***Disclaimer: This video is not sponsored. I use affiliate links. As a customer, you do not pay any more or less because of an affiliated link. A small percentage of the sale will go to the person who generated the link. Thank you for supporting my channel and helping me grow.

Пікірлер: 86

@danielpadgett2831 4 ай бұрын

You are correct on the washer it called a spring washer and it does go on your parking brake bracket but you need to put some caliper grease on the 3 contact point of the brake shoes

@JRHINE83 Жыл бұрын

Need to get this done on my 95 F-150. Pretty mechanically inclined but drum brakes always intimidated me. Thank you much for the very detailed information. Life saver!

@richhoops2413 2 жыл бұрын

Thanks for the straightforward video. With no annoying music too! A rare find

@Axle.. Жыл бұрын

Just used this to do my own brakes. Best tutorials on KZfaq!

@TheFixTech Жыл бұрын

Glad it helped!

@rfo3225 3 ай бұрын

Its been 30 years since I did my own drum brakes. This was a great review tutorial. Well done.

@kblackav8or 7 күн бұрын

The springs are always a fight.

@jeffbartruff1102 Жыл бұрын

I don’t normally comment on videos. But I had to echo some of the comments I’ve seen here. Your video was extremely helpful. Very specific and concise. I completely rebuilt the rear brakes on my 95 F150 and I don’t think we would have been able to complete it without this video. Thank you!!

@Michael-tn3pn Жыл бұрын

I had watched other videos and had wasted a lot of time before I found yours. This was a real blessing and greatly appreciated. Accurate, concise, and without any annoying music. You gained a sub.

@TheFixTech Жыл бұрын

Thank you.

@botoepfer546 Жыл бұрын

I have never seen a brake drum install video and good as this, Thanks,,

@gagesadventures8213 Ай бұрын

Very nice video! You're my new chris fix XD

@TheFixTech 29 күн бұрын

Wow, thanks!

@SteveGrin 3 жыл бұрын

Your videos are awesome, no BS - just get to work and show ALL the steps. Thank You

@tannergustin3880 2 жыл бұрын

Thank you so much for this video. I just completely rebuilt the left side on my Bronco last night. Right side is next. Fantastic video and instruction for someone who’s never done this before!

@AntiMaxer 3 ай бұрын

if ive learned anything from vice grip garage is, all you need is a pair of vice grips to do drum brakes, can confirm its all you need

@LukeWalkinshaw 2 жыл бұрын

I'm about to start work on an 84' and you're hitting all the same problem areas I have so much thanks brother!

@TheFixTech 2 жыл бұрын

Cool, let me know if you need any advice, I’ve done lots of research and work (most off camera) on this truck.

@bruceguelden9324 2 жыл бұрын

Thanks. Good, straight forward video. Also, excellent focus!!

@stevenmcquade8613 3 сағат бұрын

Good video thanks

@ramiromontoya9357 6 ай бұрын

Great video; thank you.

@mattreyes79 2 жыл бұрын

Damn good video. Saved for reference. I’ll be doing this soon on my 1991.

@emmettsampey5046 Жыл бұрын

New subscriber here. Recently purchased a 90 f150 so these vidos will help out a ton

@TheFixTech Жыл бұрын

Nice truck, these are fun restoring.

@DadBodMedicNate Жыл бұрын

At 9.99k subs I had to sub just to try to push you over that 10k mark. Good luck. Good video.

@TheFixTech 11 ай бұрын

Thanks for the sub! I really appreciate it.

@ooCHICOoo 2 жыл бұрын

thank you for sharing my friend great 👍 video

@grannysgarage 2 жыл бұрын

Longer pad on the shoe goes towards the rear

@ariq1731 Жыл бұрын

Great video!! Thanks!

@SL1CK1307 Жыл бұрын

Good stuff

@stereotypeit 2 жыл бұрын

You do good work, dude

@TheFixTech 2 жыл бұрын

Thanks.

@MakeAmericaPlumpAgain Жыл бұрын

I thank god and engineers for disc brakes.

@stevenmcquade55 7 ай бұрын

Great video, Thanks

@TheFixTech 6 ай бұрын

Glad you liked it!

@roadsouzinkie Жыл бұрын

Great Video

@TheFixTech Жыл бұрын

Thanks!

@alejandrovillegas1548 2 жыл бұрын

Buena 👍explicado 👍

@victorjimenez5944 2 жыл бұрын

Nice

@TheFixTech 3 жыл бұрын

Drum brakes are very similar across all cars. You can use this video as a guide to help you rebuild yours.

@RoseBaby 3 жыл бұрын

That’s good to know, also great job explaining everything.

@GAMMA187 Жыл бұрын

Thank you

@TheFixTech Жыл бұрын

You're welcome

@RoseBaby 3 жыл бұрын

So much great info. Great video. Thank you for uploading!🙋🏻‍♀️

@TheFixTech 3 жыл бұрын

Your very welcome!

@thekingsilverado3266 7 ай бұрын

That is the easies I have ever seen someone put that clip on the brake pressure bar. I mean it usually takes ppl I know an hour at a time.. The thing wants to bend bind up and slither away anything but slide on that pivot..

@eddybowser3818 2 жыл бұрын

The fact that all you had to do to remove the drum was to just simply pull it off pissed me off lol. My drums were rusted on so bad It took me a mapp gas torch, a 10 pound sludge hammer and a case of beer to get them both off lol

@braroh3846 2 жыл бұрын

Same! So angry watching Chris just slide his off!! :)

@mrstealyourgirl6601 Жыл бұрын

How do you put the cap on the springs

@LibertyHillBily Жыл бұрын

10:00 Nice editing.

@TheFixTech Жыл бұрын

Thank you.

@brandonkorn8227 2 жыл бұрын

Great video, thanks for the clear instructions. As a side note, what are the names of those wheels? I know they are a factory wheel, but I can’t seem to find them anywhere because I don’t know what they are called. I want to put a set on my 95.

@TheFixTech 2 жыл бұрын

These are Alcoa Wheels, 87-93 had the rivet style, 94-95 similar wheel, no rivets.

@kenwang4139 Жыл бұрын

Where can I get the parking brake arm…I threw mine out on the passenger side.

@shawnhankey9021 Жыл бұрын

Where can I find the parking brake cables from pedal to rear ? 1988 f150 long bed.

@TheFixTech Жыл бұрын

They should be two separate cables, a front cable and the rear (split) cable. Your local auto parts store should be able to order them or rockauto.com online.

@crispy8con 2 жыл бұрын

Any clues on where to find the brake bust shields for the front brakes?

@TheFixTech 2 жыл бұрын

Have you tried rock auto?

@crispy8con 2 жыл бұрын

@@TheFixTech Yes sir. Parts are “unavailable”.

@braroh3846 2 жыл бұрын

Soooooo, I don't see where else you'd use that compression washer besides how you used it on the parking brake arm under the "U" clip, but wanted to ask if you thought of a different use before I rebuild my rear end on a my 1989 F150!?!?

@TheFixTech 2 жыл бұрын

Yes, it does go onto the parking brake lever.

@braroh3846 2 жыл бұрын

@@TheFixTech thanks! Love your content. My 17 year old son first brought it to my attention! Keep up the great work!

@tracied211 Жыл бұрын

Big shoe goes in the back

@TheFixTech Жыл бұрын

Good catch, that is correct.

@josesmoya 5 ай бұрын

Hi! Guys i am a first generation explorer fan but i just have a headache with rhe diameter of rhe drums... I went to the dealer and they told me that they no longer had information about those measurements. I wanted to buy the drums but they asked me for 9 inches, 10 or 11 and I was over the moon. Does anyone know how to find that information? thank you so much!

@TheFixTech 5 ай бұрын

Remove the wheel, it should be written on the drum, if all else fails, measure the drum

@coolfern37520 9 ай бұрын

Great video! Are those wheels stock?

@TheFixTech 9 ай бұрын

Yes, they are the Alcoa 15 in aluminum rim

@joemulqueen Жыл бұрын

If a person accidentally lost (in trash....) the wheel cylinder links, where to get them? Common auto part stores have choices of brake drum hardware kits, but no wheel cylinder links..even separately. Why so hard to find?

@TheFixTech Жыл бұрын

Napa may be your best option locally, part number H1421-2 or dorman hw1422. Amazon/eBay will have them.

@joemulqueen Жыл бұрын

@@TheFixTech puzzling. Went to look at those pn at the Napa Auto store and those two part numbers are a larger diameter...think they are spec'd for a larger wheel cylinder. Gues they would work but still looking for correct diameter.

@davidallancoe01 2 жыл бұрын

Are you planning on doing the front brakes?

@TheFixTech 2 жыл бұрын

Yes, I can film that. To remove the rotors on a 4x4 you will need a special socket. Different year trucks require different sockets as some had manual locks, some auto locks with 3 bolts, some with 5 bolts. I can go through all that in the video.

@davidallancoe01 2 жыл бұрын

@@TheFixTech thank you I just got a 96 Bronco and your videos help out so much,keep up the great work

@julioponce5582 2 жыл бұрын

What size tires are these man?

@TheFixTech 2 жыл бұрын

31 x 10.5 x 15 or 265 x 75 x 15

@yourebusted5786 Ай бұрын

Tried step-by-step ........ this technique didn't work for me at all. When I got to the adjuster cable it was 1 1/2 inches short and couldn't make it reach. Went to another vid and it all went together.

@ItAintEazyBeingCheezy11 Жыл бұрын

What size rims are those

@TheFixTech Жыл бұрын

I believe they are 15x10

@thecrittergitter7576 Жыл бұрын

You don't show how you put the parking cable back onto the bracket that you attach with the washer and the horseshoe shaped clip.

@lvlikeyV 2 ай бұрын

7:52

@LeeLeezy19 2 жыл бұрын

wait, the shoes with more materials is for the back while the ones with less goes in the front

@TheFixTech 2 жыл бұрын

Yes, not sure if it makes a difference, but that is how it shows in the manual. The bigger shoe (has more brake pad) goes on the rear of the drum (facing the rear bumper) then smaller shoe faces the front bumper. They can be switched and placed in opposite positions but I’ve always done it the way the manual specifies

@LeeLeezy19 2 жыл бұрын

@@TheFixTech well i just do this because it has something to do with weight distribution and velocity of rear braking, obviously when the brakes is applied weight goes to the front of the vehicle and the bigger shoes with more materials grabs the rear of the drums for better braking of the rear