How To Rebuild the Top End on a Yamaha Banshee

No video

How To Rebuild the Top End on a Yamaha Banshee

Рет қаралды 159,643

Күн бұрын

Yamaha Banshee Top End Rebuild:
www.rockymount...
Rebuilding the top end on a 2-stroke engine may seem daunting but with the right tools and know-how, the job can be done pretty quickly and save you a lot of money over going to a shop. In this video, we show the process to rebuilding the top end on the legendary Yamaha Banshee. This machine is a 1993 model but the steps shown here will work on all year Banshee's from 1987 to 2006.
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Us On Social Media!
FACEBOOK: www.facebook.c...
INSTAGRAM: www.instagram....
TWITTER: RM...

Пікірлер: 73

@KoltFin 5 жыл бұрын

living life on the edge. no rags in the bottom end when installing the circlips

@danbee6407 4 жыл бұрын

Lmfao

@nicholasmazzone3386 2 жыл бұрын

Lmaooooo No cap

@dansavka7648 2 жыл бұрын

Not needed when u got magnets or you can just say eff it and throw more at it.. rule of thumb Do not drop more than two circlips in the crankcase really should be fine 🤣🤣🤣🤣

@chipper203 5 жыл бұрын

Great video, I would recommend measuring with a bore gauge instead of the telescoping gauges. More accurate and less room for operator error.

@stvnmoto 5 жыл бұрын

I would have definitely preferred using the dial bore gauge, but RMATV didn't have one so we went this route, and most guys don't have one either. RMATV wants most videos to be portrayed as a simple, easy, task for the guy in doing it at home. I however would do this rebuild a bit different.

@shaunmurray8132 4 жыл бұрын

this video was done extremely well. I used it as a bible when I built mine. great job!

@rmatvmc 4 жыл бұрын

Awesome, glad it helped you out! Thank you for using our video!

@thelonerider8389 4 жыл бұрын

Yep off with the OEM cylinders on With the China cylinders and piston 👍👌

@quattro4468 3 жыл бұрын

Isnt your phone made in china?

@thelonerider8389 3 жыл бұрын

@@quattro4468 yeah probably lol but that does not compared to a banshee 110$ top end kit cast shit pistons The port timing is all messed up on those cylinders Normally the cage bearing on the wrist pin end is completely junk normally don’t last a ride. They are no different to eBay or the Amazon cheap kits you get what you pay for junk

@thelonerider8389 3 жыл бұрын

Especially if you ride your bike extremely hard the kit won’t last a month. Just like the Yamaha blaster kits you’ll be surprised if you make it on fire up. You spend the money in your bike will last long

@PRODIGY123100 Жыл бұрын

Bro thank you, this video was amazing, I got my banshee up and running in no time, can't thank you enough! - Phx, AZ

@sambo6591 Жыл бұрын

Did you buy this kit from them how is it holding up

@TerpyToaster 5 жыл бұрын

what a beautiful well kept machine

@SuperNestafari 5 жыл бұрын

Better than Texas banshee? No way...good job guys

@dustintobler9840 4 жыл бұрын

Used this kit on my bike twice. Can only get 90psi after fresh rebuild. Make sure u go with wiseco pistons

@SuzukiQuadLife 3 жыл бұрын

What about the jugs

@LandonMartien 2 жыл бұрын

Wiseco is the best worth the money

@rungassamydonovan47 5 жыл бұрын

2 stroke again! This is amazing!

@trumps-a-hoe 4 жыл бұрын

A pair of sockets (one to push and one as a cup) and a c clamp works just the same to get the wrist pins out

@tylersoutherland7905 5 жыл бұрын

You guys should do a Yamaha warrior rebuild

@rmatvmc 5 жыл бұрын

Be careful what you wish for!!

@connerhooper2083 5 жыл бұрын

We didn’t get to see the test ride ;(

@user-wv9yh3nd7t 4 жыл бұрын

I need banshee

@desertduneslakeandlife25 2 жыл бұрын

Used this kit but upgraded to prox pistons (personal preference)

@cbr600rrturbo 5 жыл бұрын

Need trx250r vids to please

@the_ltz_guymaster7912 5 жыл бұрын

Can u do a video on shock adjustment

@kylemcbride6553 2 жыл бұрын

Wondering if you put a gasket on both sides of the reed valve?

@clementelara3607 5 жыл бұрын

Is good!!

@705motorlife 5 жыл бұрын

Hey love the video! Do you have a link to your torque wrenchs that go in low ft lbs like 0-30 or sumthing like that?

@dirtbikedudeministry6430 2 жыл бұрын

Inch pounds wrench then convert

@ME-wq8lq 5 жыл бұрын

And I thought I could this myself

@Alexvd004 7 ай бұрын

hi group can i install rd350 machine in banshee complete with rd 350 install thanks in advance

@rmatvmc 7 ай бұрын

Hello, sorry I'm not exactly sure what you're asking.

@chefboiard5468 5 жыл бұрын

Can anybody tell me why its ok to leave the gas on people tring to get clogged carbs?

@orivera215 2 жыл бұрын

What brand torque wrench is that ?

@c19975 4 жыл бұрын

what would cause rings to break up. this is the reason i need a rebuild kit but i am wondering why this happened

@rmatvmc 4 жыл бұрын

The piston rings breaking is most likely caused from overheating and detonation (spark knock).

@gabrielalvarez9570 2 ай бұрын

That engine would never pass a leakdown test, I hope that the pistons you used were ProX

@rmatvmc 2 ай бұрын

We used the Vertex Piston kit in this video: www.rockymountainatvmc.com/parts/vertex-stroker-piston-kit-p

@AngelGarcia_420 5 жыл бұрын

random bike to do it on, but i like it🖒

@Lewiseyers 5 жыл бұрын

It's not random, it's a iconic bike, possibly the best quad ever made

@upstatefilms5034 5 жыл бұрын

Not reliability wise lol

@user-cd6gb8ec1y Жыл бұрын

Where r u Located?

@rmatvmc Жыл бұрын

Our main headquarters is located in Payson, Utah.

@Alrisi325 5 жыл бұрын

What about breaking the bike

@danielmaksimenko1494 4 жыл бұрын

How often do they have to be rebuilt?

@rmatvmc 4 жыл бұрын

It will really vary on what kind of riding you do and how well the Banshee is maintained. If you're racing it'll probably need rebuilt around 20 hours but if you're just messing around on the weekends the top end might last 60+ hours.

@dunerider4505 5 жыл бұрын

Hey I’ve seen those q&a cylinders on your website and they are pretty cheap. That’s what worries me, I have a lot of money into my banshee so would you guys recommend these that they are pretty good quality or should I stay away.

@rmatvmc 5 жыл бұрын

We've installed these on a stock banshee and it runs great. We'll actually have a video coming shortly showing us riding it. We haven't put a ton of hours on it, but initial impressions are really good! Just be sure to follow the recommended torque specs when putting it together.

@dunerider4505 5 жыл бұрын

Rocky Mountain ATV MC hey thanks for the reply I’ll keep an eye out for the vid

@stevencarter3290 4 жыл бұрын

@@dunerider4505 personally i wouldn't go with those cylinders. If you have the factory ones send those out and have them bored to the next appropriate size and ported if the budget allows.

@mathemacits2400 5 жыл бұрын

So we gotta find out the perimeter of the cylinder head to see if its spec like area and perimeter of shapes?

@rmatvmc 5 жыл бұрын

To see if your cylinder head is in spec all you should have to do is measure the head with a straight edge and feeler gauges, you can see us doing that starting at 6:32 in this video. Hope that helps!

@mathemacits2400 5 жыл бұрын

@@rmatvmc yea it did thanks👏

@BostonBanshee 2 жыл бұрын

So on a stock banshee you can’t just put wise on pistons in? Wouldn’t 64mm fit perfect for squish ?

@rmatvmc 2 жыл бұрын

You can certainly put Wiseco pistons in a stock Yamaha Banshee. We have many sizes of Wiseco pistons available for the Banshee. You can check those out here: www.rockymountainatvmc.com/parts/wiseco-piston-kit-p

@BostonBanshee Жыл бұрын

Thank you very much I purchase all my parts from you guys!

@darrenarnold7361 5 жыл бұрын

Hi all Iv got a kxf250 on a 08 the problem I’m having is it keeps back fires does anyone one know what it could be

@JonnyDisilva-z06 5 жыл бұрын

Darren Arnold clean the carbs and put a new spark plug

@crunkdaddy11 5 жыл бұрын

needs the valves adjusted without a doubt

@kvrfilms5008 4 жыл бұрын

Ignition issues or it need a valve job

@Mark-RD350 Жыл бұрын

If you don't already know all this then you shouldn't take the engine apart, an if you're Rod is a funny colour you should go to your Dr. an get some cream for it an apply as directed 😂