HOW TO REBUILD YOUR PDS SHOCK WITH GOLD VALVES AND BLADDER KIT---PROJECT MOUNTAIN GOAT SERIES #6

Рет қаралды 5,903

2 жыл бұрын

❌️❌️❌️
2019 KTM 300 xc-w sixdays shock rebuild
WP PDS SHOCK
Installing RACE TECH GOLD VALVES
SDI BLADDER KIT
ENDURO EVOLUTION:
Check out ENDUROEVOLUTION.CA for all your Enduro clothing and Enduro practice needs!
Check out our FACEBOOK PAGE AND GROUP
FACEBOOK: / 1enduroevolution
INSTAGRAM: / enduro_evolution
TICTOK: www.tiktok.com/@enduroevoluti...
Cheers guys thanks for watching, see you on the next one!
#enduroevolution #goatmoto #edmonton #alberta #ktm #dirtbike #2stroke #gasgas #husquvarnamotorcycles #topend #powervalve #300xcw #sixdays #tusk #brokendirtbike #tools #s3 #enduro #endurocross #vertex #mountainman #ridehardenduro #exploretheworld #buildingchampions #youtube #facebook #instagram #tictok #motorcycles #smallbuisnessowner ##SupportSmallBusiness #subscribe #thankyou#lovewhatyoudo #canada #beinspired #sixdays #alberta #exploretheworld #ridehardenduro #goatmoto #enduro #racetech #suspension #greatful #youtube #dirtbikes #iceracing #ice #winter #snow #studs #mitas #shinko #michelin #vforce #world #worldwide #crosscountry

Пікірлер: 19

@Eric_Rides 3 ай бұрын

Well done! Thanks for sharing.

@timsilva1944 Ай бұрын

When you realized the important detail of putting the spring collar on before assembly and filling with oil. 🤬 I finally got the gold valves for my Xplor 48 forks. Reviewed your videos for that process. Thanks again for posting these!

@ENDUROEVOLUTION Ай бұрын

Oh no! Haha thanks I'm glad it helped. How do you like them? (Gold valve kit) mine are working incredibly well. I'm impressed.

@timsilva1944 Ай бұрын

The Xplor 48 forks were disappointing in stock form. After installing the Gold Valve kit, I'm impressed. They're much more composed as they sit higher in the stroke and don't blow through the travel, then become harsh. They don't dive like before when descending steep trails under braking. Even on gravel fire roads, they find grip and don't feel like you're on ice. Well worth the price and work to install after only 1 ride. Will likely revalve the shock and use a bladder kit as well.

@erez1984 2 жыл бұрын

Grate effort putting this video together. You forgot to mention pressurize the bladder but grate video either way. Subscribed.

@ENDUROEVOLUTION 2 жыл бұрын

Hey! thanks a lot, yeah I had to take it to a guy I know to charge it, I wrecked my old hose and was waiting on the new one or I definitely would have had that procedure in there. Thanks for the comment 👊

@stilllearningagain 4 ай бұрын

Do you have a link to the vacuum pump you copied or stylied yours after? I still need to build one. Great video.

@ENDUROEVOLUTION 4 ай бұрын

heliosure.com/product/motorcycle-shock-bleeder/ I bought it from this company. I thought about building one like it, until i seen these guys made what I was looking for, I figured they had it dialed and it would just be easier to buy it. Thanks!

@johnnybeacon4403 3 ай бұрын

what was the name of the fitting that went into the bleeder and the vacuum line went into? great video, super helpful, going to do this to my 500s shock, was amazed to see all the gas come out of the fluid fresh from the bottle. Rebuilding a shock without a vacuum pump and leaving that gas in the fluid and some gas in the body itself would be disasterous for racers... just putting around the trails prob not so bad, but doing 100kph+ through desert and whoops no way... i found the same vacuum system you have, great price, is that system still working well? thanks man, great work!!!

@ENDUROEVOLUTION 3 ай бұрын

Hey thanks! Its called BSPT fitting BSPT is similar to NPT, but there is an important difference. The thread angle is 55 degrees instead of 60 degrees, which is usual for NPT. Therefore, an NPT fitting will be inserted in a BSPT connection or vice versa, but they will not be sealed. The pump is still in food shape!

@johnnybeacon4403 3 ай бұрын

@@ENDUROEVOLUTION hey bud one more question, the link to the video on modifying the drill bit to drill the correct size bleed hole .

@ponydown4189 2 жыл бұрын

Another great video from you! I just found your channel. How do you like the suspension after doing the forks and shocks? If you wouldn't mind doing a over view on your bleeding system that would be cool. I bought a vacuum pump and filter housing but never built the system yet.

@ENDUROEVOLUTION 2 жыл бұрын

Thanks! I'm glad to hear that! The suspension feels more firm, I feel it gives me more confidence in 3-4th half to full throttle, places I ride that are usually high 2nd or low 3rd gear im doing in 3rd full even looking for 4th sometimes, And that's with the settings from racetech, I need to go and set up a good line and keep hitting it to get everything dialed in...if it needs it. I love that its compression and rebound on each side now👌 I will definitely put out a better video on the shock pump, the shock video was getting pretty long so I figured I'd shorten it up by Trimming the shock pump part and then do a separate video. Next time I service my suspension I'll focus on that. Cheers bro🍻

@ponydown4189 2 жыл бұрын

@@ENDUROEVOLUTION thanks for the reply. I'm. Trying to decide what direction to take with my suspension on my 18 300 6 days. I do like the option of learning revalving and playing with shim stacks. I'll be looking forward to the shock bleed video!!!

@ENDUROEVOLUTION 2 жыл бұрын

@@ponydown4189 I'm a big advocate of doing everything yourself, you learn a skill that you'll always have and it will save you money in the long run, it is a bit pricey to get all the equipment, but once you have it, you have it, once you get good enough you could even help your buddies. Knowledge is the most valuable thing in the world, 2nd place is tools. I 100% believe you can do this yourself 🤙 and if you run into any walls shoot me a message and I'll be more than happy to help you out! I love this sport and I love helping people. We have a group on Facebook come join the Goatfamily 🐐🤙

@ponydown4189 2 жыл бұрын

@@ENDUROEVOLUTION oh yes I agree 100% on what you said. I have some suspension tooling but I'm sure you can always buy more. The deepest I went into anything was putting in a wp 50mm lowering kit on my bike. I'll chrck out your page!!!

@henricsoderlund4428 Жыл бұрын

Om pretty sure you turned the PDS piston upside down.