this guy knows how to implement music in a vid. Great job not letting it over power the video!

Man I got to say I watch a lot of repair videos and you did a really really good job with the camera lighting the angles the step by step instruction you don't miss a step man I appreciate that. Appreciate all your care when it comes to making these videos. Bravo!!

Now this guy knows how to make a video.

Holy cow this video was so, hyponotizing to watch!!!! And relaxing too!!! Thank you so much!!!

Now this is how you make a "how-to/help" video! Great job. Now I need one of my model.

Super clean work man. I'm trying to learn everything I can about my Seadoo and this was very well done. Keep it up. Thanks!

SWEETNESS : a great vid to follow ,no bs just fact & torques # Thank You

ahh the smooth running sound of a fresh serviced pump. very satisfying

A totally professional shade-tree mechanic job. Perfectly done sir!

magnificent work. Thank you.

Great videos you guys have helped me out a lot of time with your videos doing things my self thanks

Awesome video layout! Thanks for sharing!

Awesome just when I'm about to do it myself. You make a Video! Thanks guys

Quality video! Make sure to watch any pre-roll ads to support these guys!

Great editing!!

Nicely done!!!

Thank you for all the help! I appreciated your video

Good job Sir, I have an old xp 800 but it gives me a lot of fun, (two strokes will never die), and I'm trying to learn everything about it, thank you for teaching us, greetings for Argentina.-

These are super helpful videos good job and thank you keep it up

exelente video señor !

Nice edit!

Best video I have seen thus far on KZfaq. Outstanding Sir

Thanks for the video! Helped me easily tackle the pump rebuild on my GTI

What an excellent presentation

Absolutely great video. Very well done.

nice job, and thanks

Great video you did a good job it would ben nice to see the pump removal out of the ski as well.

Ótimo profissional, aqui no Brazil não vejo video como esse. Ganhou mais um escrito

Please tell others or sell how to make vids. Great help. Thanks

It’s a lot of work !

This video was so helpful thank you

Done mine today , great video very helpful

That is the best video on KZfaq! Great job.

Great video's

Are you using the Lucas bearing grease to fill the pump and cone? I just replaced my pump grease with OEM stuff and it was more of a yellow than the blue in the video.

Excellent!

So my 2013 155 that I have owned since new has never had a pump rebuild. It currently has 1045 hrs on it. its only run in fresh water and I never sucked up anything bigger than a small sticks that I could clear out on its own. I check under the impeller cover when winterizing and I have never seen any water, nor is the grease milky, seals still look okay. Should I be rebuilding it as PM? I have read online that some people say every 200-300 hrs but that means I would have rebuilt it like 5 times by now. Am I just playing with fire by riding with this many hours without rebuilding?

Fantastic video. Love the closeups! Makes me want to go buy a press.

Hi I have questions I have a sportster el 2001 and I can find the pump jet can I use a different year pump jet to my sea doo boat ?

Great video! When pressing the seal in, are you bottoming out the seal in the bore or the tool on the face of the pump? I'm getting ready to rebuild the pump on my 2006 RXP 215 and don't want to spend the money on the custom tooling, if I don't need a stop to set depths.

Hmm🤔, I think I've been in this situation before! (thanks for the help on the fourm)

Great video

Hi mate. I have seadoo rxt x255 2009, I want to check the Engine compression but i don't know what is the best compression? thanks

When you opened up the cone there was oil in it is grease better to use after rebuilding pump

Do you use the same bearing/seal pusher you used in the video for the new version of the oil seal. I can’t get the old style anymore and the new ones look like there are not as wide as the old ones. Any idea on this? Thank you. Part number 271002071 has superseded part number 293200086 and they are quite different.

Nice video, wondering if the jet pump can move in and out, are the bearings knackered? Mine makes a sort of rattle sound at idle. Shaft has side to side play as well

Which brand is the press he is using? I like the notches in the metal plates. I have done a Google search but can't find that one.

I have a 2016 gtr 215. Where can I buy those special tools needed to remove the impeller end replace the bearings? Do you have a part # you can share?

My hull filled with water on idle and when I took it into the dealer I'm being told the pump bearing went and caused water to blow back through the carbon seal. Does this make sense? Apparently carbon seal is fine but issue was with the pump. I'm not sure I understand how a pump bearing coukd cause your hull to fill up.

Hello !! I want to ask a question. 2013 Sea-Doo GTX 155 power is lost and does not start from the start button, there is no sound signal LCD CLUSTER does not show anything what could be the reason?

So I see many rebuild kits for the jet pump. I am looking to just replace the o rings and the grease on the impeller bearing. I cannot find the o-rings and the locking screws to purchase anywhere. Do you have a specific place you source parts from?

Great job showing and telling, how much do you think one of them jet pumps are now days. I need one one of these days, if you can reply me back I wood thank you for for telling me. You the jet pump rebuilding man, well see you next time see ya bye.

What are the exact tools you use to push the bearing, shaft and seals out of the pump. Looked on you site but I don't see the one you used and don't want to order wrong ones

Can we get some part numbers for these special tools you are using (bearing pushers). I see you used 2 different ones. Are these tools the same for a 2006 supercharged GTX? Thanks

The 2016 Gtx manual says to add only a thin layer of grease to the o-rings of the jet pump cover and no grease into the cover anymore. In spite of all do you recommend to add more grease ?

Hey, where can I purchase the impeller/ bearing pusher? I can't seem to find one on Ebay. Your input be greatly appreciated. Thanks

Hiya, do you know if the twin screw solas is any good . Seadoo rxpx260RS

Great vids as usual! Question, what is your opinion on stainless steel wear rings?

I have a 2015 Sea Doo GTI 130 Se that needs a jet pump rebuild, would it be the same procedure?

Thanks for the Great video. I think I need to rebuild the pump on my 2018 seadoo wake 155. It's got a distinct whining sound that my buddies ski had before his bearing exploded on his spark jet pump. However I'm having issues finding the parts and tools I would need to do the job. Any recommendations? Thanks

Great video. Perfect! I was wondering if you can give me advise. My 2008 ski run well yesterday for 3 hours. Today, after 20 minutes, of low speed riding a grinding noice started. I could here it from 40 yards away. Can a shot pump bearing cause that? Any other suggestion what to check?

Do the 4 bolts when putting it back in matter on how much you tighten them, when reinstalling into the jet ski?

Can you share a link for the press, impeller shaft pusher, and seal bearing pusher? Thanks!

Can i use my silver based antisieze on the shelf instead of the locktite brand 767? I already have a big bottle of some other brand.

Does it need oil in there or is that just the older ones that have oil in the bearing?

Hello an awesome videos as everybody else has said. I removed the main bearing out of my pump unit just as you did and when I pressed the shaft out the inner races came out of the main bearing. So I end up with three pieces, the outer race with the ball bearings inside and then the two inner races. Is this how it's supposed to be or is the bearing supposed to stay in one piece. Thank you very much for any info you can offer on this. I don't want to buy a new bearing as this one looks like it's in perfect condition but I'm not sure if they're supposed to come apart into three pieces. Thanks again

Hi Were about did you get your bearing driver from

😊 top esses vídeos parabéns 🎉

Do you recommend changing the jet pump grease just as a maintenance precaution?

Did you guys end up packing the grease into the bearing, before putting it onto the shaft?

Another Great Video. I have a Pro tip that won't help many, I'm a retired Professional wrench and I now live on the Gulf Coast in a house on Stilts with a One Car Garge under 1000 Feet from the Shoreline, I have no space for a Shop Press not to mention that the Corrosion here is horrendous. I just happen to have a S.-O. CJ Puller Set that I purchased Piece by Piece over Decades from the Tool Truck with weekly payments. The CJ-2002 is a good Starter Set (Costs way more than a Shop Press BTW) and may be available Used? A Pair of Longer Jaws and a Longer Screw would need to be added to be able to Rebuild a Jet Pump however. My point is that it is possible to Rebuild a Jet Pump without a Shop Press. Randy AKA randog311

Totally enjoying your videos!!!! Where can I guy purchase a shirt and shop banner?

is the Jet Pump All-Aluminum housing material? wondering what's that gray colored piece at the start of video? I think it's the Venturi. Thanks

Hey mate how you doing? Got a question for you...on the typical 90s seadoo sportster how much water does the venturi push up from jet for cooling? Obviously it would depend how good the wear ring is but would it be as much as a garden hose would push out? Just doing some calculations for my Subaru impreza project..will most likely be running it through a heat exchanger though. Anyway take care.

What kind/brand of pump grease are you using? The seadoo brand one is yellowish. And why do you recommend replacing the cone screws? Great video by the way.

is it same on seadoo spark trixx?

Hi, what's the power of your red press, please, is it a 6T one or a 12T...? Best regards

Tried it, flange nut was stuck and impeller came lose on the first step. Did you turn right or left on the impeller to loosen flange nut?

Can tightening an impeller too hard damage a bearing or nut?

did you drill a hole in the oil seal to get it out?

Hi 3ftDeep, I would like ask you if it's possible to replace the LOCTITE 767 by another product ? Because it's impossible to find it in France . Many thanks for you reply ;)

Is there oil for this pump? Or only grease?

my jet pump is very tight, I removed the engine for a rebuild without taking out the jet pump but it is very hard almost impossible to turn without the engine on

Hey, I just removed the jet pump housing , can I send it too you , to rebuild ?

Clean nice job 👍🏼🍺 now let's enjoy a beer together 🤣🤣🤣

Do you have to remove the wear ring?

What's the best place to buy parts for seadoo?

I know the older skis used synthetic oil in the pump and that one only uses grease? I think the grease would be better myself.

What would be the symptoms to let you know you need to have your jetpump rebuild ? I cannot get pass 10 mph even at full throttle rpm rev high. The only time i can get it to go is when there is only 1 to 2 people (normal size) on max then it goes to 40-45 mph

Hello, to my understanding I own a 2003 Seadoo Sportster 4tec jetboat, however I order a jet pump rebuild kit with bearing number 293350042 and it doesn’t fit. I made sure to triple check I was getting the right kit. Obviously I’m frustrated, any ideas with what I’m doing wrong?

Hello, great video, how are you loosening the flange nut at the start when you hold the shaft in teh vice?

At my shop, they never come off this easy 😂 Map Gas baby, no beating Deep Heating!

Good afternoon, what special tools are used, and how to get it? any website that I can buy and be sent to Brazil? Thank you Ronaldo Pires

Do you know if the process would be the same for a 2015 130 GTI?

Just curious, it looks like there isn't any black paint on the pump housing. Did Seadoo stop painting them?

IS TH JETPUMP HOUSING THE SAME SET UP ON A SEADOO SPORTSTER 2003 4 TEC 155

My drive shaft splines were stripped at the impeller. I was wondering if you know what causes that. And they were only stripped about halfway up the splines so i fell as if the shaft is not long enough or something.

Any advice on why my GTI 155 2007 runs the first 6 gallons of fuel fine the plays empty after I burn the first 6 off the top? Once I fill it it runs fine again down to about nine gallons and acts empty

I have a 2017 seadoo gtr-x 230 I just put new bearing grease from the shop where the flange nut is and also in the cone. Question is, is it ok to apply that same grease where the drive shaft enters the impeller as well as in the boot or is triple guard grease the way to go? The amount of grease from factory as I took it apart seemed to be insufficient to the amounts posted in your video which I thought was odd. Around the splines of the drive shaft and inside the boot had rust in the thin layer of grease that wiped off thankfully but trying to prevent that or any rust in the future.

Amigao vc pode me informar qual é a posição correta dos retentores do jet kavasaki 750