If I have helped you, please consider hitting the Subscribe button or buying me a coffee. www.buymeacoff...
Пікірлер: 31
@AsIfToFly3 жыл бұрын
This is was the first video i've been able to find that adequately describes how the DI and the audio interface work together, while still being short and to the point. Thanks!
@VirtualVerghini3 жыл бұрын
Thank you for taking the time to leave a comment.
@allaroundwinner2 жыл бұрын
this is so true!
@jackoldnall2665 Жыл бұрын
Finally a clear video demonstrating how to use a DI box. Absolute life saver!
@roberttaylor1656 Жыл бұрын
This explanation was the best and most straight forward I've seen. Thanks for taking the time to make and post it!
@darioserrato49714 ай бұрын
Wonderfully clear and concise! Thanks.
@SmartStr33t2 жыл бұрын
Thanks for this. My friend just recommended me this set-up so I canfiddle about with Logic amps (via DI) but also get my amp sound. I was trying to find out from this video whether the 'link' output on the DI box was what I needed in order to plug the guitar into the amp, and your video answered that question very clearly so thanks again.
@ronaldcamonier24759 ай бұрын
This was helpfull, thank you!
@RedArrow732 жыл бұрын
Fascinating . . .
@ed14952 жыл бұрын
but then if you also use the DI and registers two tracks come out on the software grid right?
@kostis62 жыл бұрын
Nice video thanks! any special acoustic treatment needed for the bass frequencies or it is not necessary for this amp you are using? thanks again!!!!
@VirtualVerghini2 жыл бұрын
Sure you can get your room treated if you can afford it. Alternatively work with mic and amp placement and if all that fails work with the DI signal
@kostis62 жыл бұрын
Thank you!
@fabricekanana2 жыл бұрын
Thank you i have a question is it possible to use this system on the stage or during performance?
@VirtualVerghini2 жыл бұрын
Absolutely
@karolpopiak20312 жыл бұрын
This is simpler than I thought. So when I connect microphone to interface and connect DI to interface also, I can modulate microphone placement (or put effects etc.) with recorded session and the DI Box should give me different sounds? Is it how it works?
@VirtualVerghini2 жыл бұрын
Yes. I like to experiment with the Di to see if I can get an even better sound than the mic.
@karolpopiak20312 жыл бұрын
@@VirtualVerghini I wonder how does it works. Seems like fun to do.
@fabricekanana2 жыл бұрын
Hey thank you but i have question is it possible to use this system on the stage during performance?
@VirtualVerghini2 жыл бұрын
Yes
@aaronkelly42552 жыл бұрын
ok great video....thankyou..... Now what if the Bass amplifer wasn't powered but was instead a PASSIVE speaker? (300W : 8 Ohm) This is my problem atm.....please what am i missing here thx
@VirtualVerghini2 жыл бұрын
Then that would not be an amplifier. A passive speaker needs an amp to drive the speaker to move. You can still record via a DI and not even bother with the speaker or you could buy a small bass amp to connect to the speaker.
@ripperthecrooks64282 жыл бұрын
Hello nice video Do I absolutely need a DI box if im recording guitar ? I am using a scarlett 2i2 second gen with a shure57 on my amp and I realized that my signal was quite weak in the DAW theres so much headroom that I need to increse the volume on the track.
@lvllo36892 жыл бұрын
The sm57 is not sensitive so make sure you turn up the gain pot and put the mic as close your amp. Turn up your amp too. You do not need the di box.
@ripperthecrooks64282 жыл бұрын
@LVLLO okay thank you very much
@eDrumsInANutshell2 жыл бұрын
@@lvllo3689 But why? The scarlett interface has these instrument inputs.
@ed14952 жыл бұрын
The cones? 8?
@moogle6253 жыл бұрын
hi do you recommend to use phantom power on Bass?
@VirtualVerghini3 жыл бұрын
Phantom power is needed to power active DI boxes and condenser mics
@jojo-fj7lw3 жыл бұрын
@@VirtualVerghini what is power DI used for? Can i only used the audio interface? Any thoughts?
@donutsacrifice25882 жыл бұрын
@@jojo-fj7lw phantom power is used to give power to the di box or the condenser mic (or lifter, if you're using a ribbon mic) That means that phantom power turns on your di or mic. Yes, most interfaces provide phantom power, including Focusrite Scarletts