Рет қаралды 74,004
***1/10/2019 Update: Please see another great idea posted from Rod here: "One mod I made and this applies only to HOB's with flat covers like the Aquaclear. It was getting cumbersome when I needed to clean the baffle due to crud buildup so I use pins to attach it to the cover. I cut about a 1" x 1/2" rectangular notch on the side of the plastic where it attaches to the lid. I lay the plastic flat on the lid instead of having that cylindrical shape and use a clothes pin in the notch to essentially clamp down the plastic to the lid. You can cut away some of the baffle if it curls under too much. Just thought about putting some holes in the front part of the baffle so water can flow left, right and straight ahead. Again thanks for the idea."
Folks, I'd like to introduce you to the newest (and most expensive) member of the den. This is a $30 Koi Betta...once I saw him I had to have him. The colors are too unique. In getting him I knew I had to do something about the filter flow in the 10 gallon he was going in.
I feel a lot of people are trying to reduce the flow on their hang on back filters. Here is a very simple DIY way to do it. All you need is a water bottle, scissors, and duct tape. I hope this is helpful, and please welcome "Patriot" as the newest member of the den...
Keep tankin!!!
Mike