I've been complaining to people for years that the butane canisters never work. Never once has anyone said you need to release pressure and sure enough it works!! Thank you for posting this. Imagine how many people feel really stupid after getting it to work after all these years LOL!!

Thank you for posting this video. It got so annoying having to stop in the middle of a good meth smoke session to go by another lighter. Now I can tweak all night uninterpreted much love!

Literally the only video it seems like on KZfaq that helped me with my problem 🤦🏻‍♀️ thank you so much!!!

Bruh the way I grabbed my dried up torch that’s been marinating in my closet without fuel for months, released the pressure like you did and it works fine af 🔥 the way I never knew you had to take out pressure could’ve saved me from buying all the other ones that came after

I wish I knew about letting the air out first about 20 years ago, lol thank you young man. I thought when I got older Wisdom would occur lol

Thank you man very very helpful I was Soo confused but once I found out I had to release the pressure it worked!!!! Thanks again mate I wish you the best

So it wasn’t just me that didn’t know to release the pressure… I don’t feel so bad anymore 😅

It worked for me! I was able to refill my torch after I let out that resisting pressure!

I don't understand why I always have trouble. I always bleed all the excess before filling it, when I fill it the fluid spurts everywhere and I'll get like 2-3 lights off it then it's empty again... what am I doing to get air in there!?

Thank you so much! that is the 1st time that it ever worked for me. I never knew to let the old air out.

This was so helpful tysm (though I probably shouldn’t have used a fork to release the pressure)

Thank you so much. Been wondering why only a little went in. Release the pressure!!!!💪🏾💪🏾🙏🏽

Appreciate it I was able to take a dab cause of u!

THank you so much bro this was the most helpful video ever

Thank you I’ve been wanting to refill my techno torch it’s my favorite

I just found your video and thank you! It helped me tremendously! 😊

Thank you for the information. It helped. Removing the air is the key.

idk mines are still spraying everywhere with very little making it into the lighters I've tried jamming it in harder and same results

Thank you! The company provided the worst instructional video for refilling and THIS is how they should've done theirs.

I let the air out and then put the butane upside down and cover the fill hole, yet it always sprays all over me and I can't ever fill it. I always make sure to let the air out first, but I don't know what I'm doing wrong. Is there a good torch that you would recommend? Thank you in advance 😊

Why do you shake the torch after you fill it aren’t you supposed to do that when you empty it of air?

I have hell of a time with every torch I’ve had. Really messes up dab

Do me a HOT RAIL 🔥🔥 AND GET"UP THERE"

What’s not shown here is that some butane canisters are sold with a metal stem that will not seal to the torch fill valve. These canisters have a half-dozen tips molded into the cap so the user can select the tip that fits the torch valve. Also, a very small straight-blade screwdriver is easier to use to depress the torch fill valve to release any residual pressure before refilling. Just make sure the blade doesn’t block the valve orifice.

Does it have to be completely empty to release the gas and refill it? I wanted to top off a half full blink torch but I don't wanna go releasing the butane accidentally instead.

this guy is my new youtuber😁😁

When you let the air out, are you also letting the butane out?

Thanks was very helpful, thank you.

Thanks bro. I was struggling out here 😂

I always thought that was a screw at the bottom,iktr chocolate brotha

Thanks my guy, that was super helpful!!!

Thank you very much for the info👍🏻 mine didn’t come with instructions did t want to blow myself up 😂

Excelente!! Gracias!!

I did this and my refill butane just keeps spewing the butane from the insert point in lighter, what do I do

Do I push the rubber seal or the brass refill spout thing?

Can you fill it with a little fluid left in it

Thanks it worked like a champ!

How about wen ur smoking and u only getb1 or 2 solid lights and then it acts as if it's dead a buddy showed me last summer how-to purge and he didn't do it anything like u did in this video and seemed way more effective he pressed the valve in but wen the air finished draining he flipped it holding the valve in and it continued to drain again hebdid that likeb3 or 4x but I still can't get mine to come out of limp mode or whatever it's prob is

So for anyone having problems. I have a possible solution. I was opening the butane valve to fill it. Then closing it when it was filled. Wasn’t working my brother in law who’s clearly more savvy than me figured out you need to leave the valve open. Hopefully this solves some problems for somebody

I've been trying to fill my torch with the can right-side up this whole time, smh, thanks bro lol

Is it safe keep one of these in my room cool temperature. ?

I filled up the tourch with fluid and no flame what am I doing wrong?

Thank you very useful

How are you supposed to know if it's full if you can't see inside the tank?? I camp next week & don't want to buy a new torch I really like my handheld for starting tinder.

Appreciate the video 📹 💯

Can you still refill the torch without emptying pressure?

If I still have butane in my torch and I just want to top it up will doing this waste what I still have in it? Like should I only do this when my torch is properly empty?

Thank you soooo much.

Thank you

I refilled my but now it wont turn on lol what did i do wrong?

THANKYOU!!!!!!!!

I filled up mine with the zippo lighter fluid is that why?

thanks!

thanks for showwing me how... yo i have that same blue lighter.

Thx bro

Preciate the video

I'm having the same problem I'm trying to add the zippo propane to my torch lighter and it's spilling everywhere and mind you it's very cold. Lol

Thats terrible u know how many mini torches i have ran thru because it kept squirting back at me when i tried to refill smh . Thank u

I refilled both my torch and lighter.. The torch was working after the refill. But the lighter did not work even though I refilled it. Does anyone know why this would be, why the lighter will not work?

... Actually if the air pressure is out, you shouldnt need to "go untill it stops. Mines clear... without the air pressure i finally leaked out... It filled in like 3 seconds.

Where u get the gas to buy

For people who don't have super vision dont bother watching

I never knew u had to bleed it do u know how many butane lighters I've thrown away not knowing it was something that damn simple I feel so damn stupid 💔

Damn I never knew that my first time trying to re fill I ask the store worker how to refill all he said just poke it in and push so I did that and the whole gas leak on me no wonder

Never use Ronson On torches!

Aye I was like #1k

Ahh thanks I forgot to empty the airrr

Well today I learned mine wouldn't refill because I didn't vent excess pressure.

See that method looks a bit complicated... I never refilled a lighter b4 and I don't think I will... unless it's a easier way... I have the items, but I ain't tryna blow my Damn self up... SEEMS,THIS IS MORE FOR THE EXPERIENCED PEOPLE .. forgot my dad always have a refillable lighter, so ill ask him... thanks for the video tho... it covered the safety methods..

So the man have 117k views not even a 1000 subs wawww. I guess what I heard was true you guys don’t support your own people.

The volume is too low

What are you pushing? I can't see. WTF

Why not just wait until it's actually empty?Seems like a waste to release what's in there already just to refill.

Make sure it’s well ventilated this shit is toxic!!! Lmao

This should be a 60 minute video - no longer - the process is very simple

Marine taught Bible over 60 years Shepherdchapel on YT explains whole bible God bless.