How To Refill Window House AC or Portable Air Conditioner with R134a + Tips + What I've Learn!
Рет қаралды 319,112
6 жыл бұрынNOTE: All the Links - Parts - How to... BELOW !!!
July 2018 - Here is another Video after 2-1/2 years later about my AC Refill with R134a. This is a followed up Video, what I've learned this past 2+ years. Some of these are just tips... But you can find the " Original " Video on HOW TO DO IT BELOW!
CORRECTIONS FOR THE ORIGINAL GAS: R22
--------------------------------------------------------------------------------------------------------------------------------------
NOTE:
You can just get the " Adapter Only " if you already have the Hose (Car AC Refill Hose Kit), or borrow from a friend.
If not, then go to your Auto Store they have them or even Walmart Or check this out on Ebay for $1.98: R12 R22 R502 Screw to R134A Fast Conversion Adapter Valve 1/4'' to 8v1 Thread - Ebay Item: 172714410258
--------------------------------------------------------------------------------------------------------------------------------------
IMPORTANT INFO ON TUBINGS:
Before you buy, measure your " Refill Tubing First " to see which on you have... Then buy the item(s) that " FIT " your needs below!
--------------------------------------------------------------------------------------------------------------------------------------
PARTS LIST:
Here is what you need if you or your friends doesn't have the R134a Adapter (Car AC Refill Hose).
----- If you have the R134a Adapter (Car AC Refill Hose), then you will need just the fitting (R22 M/F) around $2-$3 Bucks. Check this out on Ebay for $1.98: R12 R22 R502 Screw to R134A Fast Conversion Adapter Valve 1/4'' to 8v1 Thread - Ebay Item: 172714410258
1- You will need the Meter Gauge called: " Safe Can Tap R-134A to R-12/R-22 System 19" Can Tap with Gauge " $14.00 - eBay item number: 291953959760
2- Measure your refill " Tubing / Line * " and get the one correspond to your needs!
* A - BPV31 SUPCO Bullet Piercing Valve for 1/4", 5/16" and 3/8" Tubing
eBay item number: 302708662463
* B - BPV21 SUPCO Bullet Piercing Valve fits 1/2" and 5/8" Tubing
eBay item number: 161864862052
3- Go to your Auto Store: Get a Can of R134a ($8-$10)
NOTE: At Walmart R134a is only $4.88 (2018 Price)
www.walmart.com/ip/Super-Tech...
--------------------------------------------------------------------------------------------------------------------------------------
ORIGINAL VIDEO JUNE 2016:
TITLE: DIY - AC Window Air Conditioner Refill with R134A - All Steps Video Merged Original Date June 2016: • DIY - $5 AC Window Air...
--------------------------------------------------------------------------------------------------------------------------------------
UPDATE VIDEO JULY 2018:
TITLE: $5 Bucks House Window Air Conditioner Refill - Recharge - R134A - DIY AC Long Version Update
• $5 Bucks House Window ...
--------------------------------------------------------------------------------------------------------------------------------------
My Channel Disclaimer:
These Video(s) on my Channel is mainly for entertainment purposes only and due to factors beyond of my control, I cannot guarantee against unauthorized modifications of this information, or improper use of this information. I assumes no liability for any property or personal damage that may arise from doing a Repair or your DIY Projects or Vehicle after watching any of my DIY or Repair Video's. No information contained in this video shall create any express or implied warranty or guarantee of any particular result. NOTE: Any injury, damage or loss that may result from improper use of tools, equipment's, or the information contained in this Channel / Video is the sole responsibility of the User / Users.
1- DO NOT LINK or COPY WHOLE or PARTS OF THE VIDEO
2- DO NOT POST THE VIDEO WITHOUT PERMISSIONS
3- THIS IS A COPYRIGHT VIDEO.
This Video is for Entertainment Purposes Only!
:D
@JodBronson 6 жыл бұрын
*2018 Update Tips - Refill follow up + Gauge Adapter tips Video:* kzfaq.info/get/bejne/h8qAm7BorrzRYZc.html *2019 Update Video:* kzfaq.info/get/bejne/Zq-nmbNlsqfDmKc.html
@grahamsargent1391 6 жыл бұрын
Hey Buddy I watched your 1st video and thumbs up ,, I just stumbled on this new video and thumbs up again ,, at some point I will attempt this myself ,, I'm a small time scrapper of metals and find lots of AC's , It's a good way for me to make a buck by extending the life of the air cons i find instead of sending them to their grave ,, But up here in Canada there a little freaky on freon but if I can save a buck and make a buck then F__k it i'm in ,, take care !
@JodBronson 6 жыл бұрын
+Graham sargent - #1 Rule. As long you are NOT releasing Gas into the Environment, you are NOT breaking any Law! As for refilling and making Money, I am sure you can easily. Here is what I would do, if I were you. Get a good " Gauge " adapter / filler. They have them are Harbor Freight, although I don't know if they have those in Canada. I am sure you can spend extra for Shipping, since this is a Business Adventure. NOTE: If you are serious about making money.... On the Unit itself, it will tell you what type of Gas is in there. From that, you can actually buy the SAME TYPE of Gas using Ebay etc... Double check for international shipping with Seller(s). Back to the Gauge Adapter, the reason why I suggested that is..., you can " VACUUM " the Line to do the " Proper " Filling. By doing it Properly, you can have better Customer and they will send their Family / Friends to you and also, you can make Money from just doing " refills " as well. Well that is all the Tips I got for you right now. Don't be afraid to venture out...., there is a lot of Money to be made. You just have to do it! :)
@amynodine6075 6 жыл бұрын
Graham sargent We buy it at Canadian tire in the automotive area. Have also seen it in Walmart’s in Canada.
@rodrigocarvajal524 5 жыл бұрын
I did all you said works perfect thank you buddy👌👌👍
@JodBronson 5 жыл бұрын
Cool, glad it worked out! See the Updated Video and what I've learned here, it might help you further on tinkering! kzfaq.info/get/bejne/h8qAm7BorrzRYZc.html
@baanman 5 жыл бұрын
I have an old wall ac unit that is 36 years old. It now works like brand new. I used it every year but the last couple years just was not cooling much anymore. I got inspired after watching your vids and pulled it out and did like you did. The only difference is that the unit would only take about a third of a can before it stopped taking any more, and this was on for about 30 minutes. It equalized at 50 psi and was throwing out 37 degrees steady. All the nay sayers out there, you just go out and buy your $500 AC unit, and I'll enjoy my ice cold air for $5.00. Been working nice and quiet now for several weeks, and I don't put the dial above #5 out of 10 or I would freeze. Thanks Jordan.
@JodBronson 5 жыл бұрын
You are welcome! Wow, even on a 36 years old one? Wow amazing! ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
@DankHunt420 2 жыл бұрын
Can tell me the name/model and year I just want to see what it looks like
@SheenaRea Жыл бұрын
@baanman I have a little Kenmore window unit that has worked every year for over 30 years also! It was the first AC we ever bought. They made them good back then! Anyway, I'm going to get a AC tech to "recharge" this because I'm sure it's still got life in it. Just doesn't have the COLD air I like. 🙂
@mattbaker5757 5 жыл бұрын
Hi Jordan! I just wanted to say thanks a MILLION for this A/C fix! My Story: a couple of years ago a purchased 2 GE window A/C's, but after several months of use they started giving off a terrible smell. The cause was that there were no drain holes in the bottom of the case for the water from the A/C's "sweating" and it collected in the bottom, about an inch deep, the fan was splashing through the water like a paddle boat, which was making the motor work harder and spraying moisture into the house! Not only that, but then the water went stagnant and a red algae started growing in the water which was the ultimate cause of the terrible odor! So, I decided to drill my own drain hole in the two A/C's, the first was successful and the problem was solved, however, during drilling of the hole in the second A/C, the drill caught me by surprise when it breached the metal case and the drill bit shot up too far and punctured one of the copper lines. A definite comic moment as I got sprayed with freon and stagnant water with algae! Not too mention I ruined the $200 A/C unit. I set it aside and bought another brand (which I made sure had a proper drain hole). But as a DIYer I planned on figuring out how to repair the A/C myself once I had the time, nothing to lose, like you Jordan, since it was broken already. I was looking for how I could refill the A/C when I stumbled across your videos which enlightened me to the existence of the line-tap. And also that I could use something other than R410a freon in it, since I didn't want to pay $100 for a big tank. So I took the A/C apart, repaired the damaged line with a copper "patch" and solder, then refilled it just as you showed. Filled to about 45-50 PSI and my A/C is now working good as new again! It cools every bit as well as the other identical unit! Thanks again! Long live DIY tinkerers!!! Matt
@mattbaker5757 5 жыл бұрын
So I officially call "Bullshit" on those who say you can't use R134a in a R410a window unit! Most likely they are just covering their own asses from regulations, legalities and fear of being sued, or listening to those people. And to those who say R134a will burn out a R410a compressor, I say, how the FUCK do you know?!? Have you ever tried?!? I suspect those people are just going "by the book," the same book written by manufactures and others covering their asses for regulatory and legal reasons and not wanting to be sued. Jordan's is working still after years, and mine is working fine after a week so far...if it does happen, it was a lost cause anyway, so I had nothing to lose (does ANYONE looking to fix a non-working window A/C have anything to lose?!?)...I've done a lot of fixes as a DIYer over the years that people say can't or shouldn't be done, but I did, and the fixes worked! Hurray for those of us who think for ourselves,question everything, and experiment! Think outside of the box you morons!
@JodBronson 5 жыл бұрын
Wow, great story! You are welcome! YES, I think about 50 PSI would do the trick. Since I refilled this and I also did it again since I made mistakes few years ago. Happy to report, the AC Unit is working AOK still. I am cleaning it first before I make a new video, but I will update again with another video so People can see it's still working.
@JodBronson 5 жыл бұрын
See the Updated Video and what I've learned here, it might help you further on tinkering! kzfaq.info/get/bejne/h8qAm7BorrzRYZc.html
@feddersairdude 4 жыл бұрын
@@mattbaker5757 Calling professionals who took the time to study the field they work in is just down right wrong. If you yourself took any time to look into how refrigerants act based on their chemical compounds and the pressures they operate at, you would understand why you cannot simply put a different refrigerant in "because its cheaper." There is a reason why certain refrigerants are not legal to sell to individuals like yourself, simply because you have no knowledge of refrigeration whatsoever. I support DIYers and people who want to try and repair rather than replace. If you take the time to look at my channel, you will see thats something I live on, repair rather than replace. But repairs cannot be hack jobs. Your unit if it once took r410a should have a suction pressure of around 120psig, however, 134a will operate at around 40psig at that same interval (this information could be found on a P-T chart). They do not maintain even close operating pressures. You risk major damage to the compressor of the unit. Basic refrigeration knowledge, basic answer. Another example of this situation would be someone suggesting you put diesel gas in a gasoline engine....see where this is going? Feel free to contact me if you have questions regarding anything us "morons" know about OUR field. Thanks
@watcherwatchmen7785 3 жыл бұрын
The water splashing on the coils is actually a built in design of the A/C unit. It helps cool the coils by splashing water across them. Obviously, if you don't want it spitting water into your house you can drain the pan, but I just wanted to let you know that it's designed to do that. It works similar to the principle of how a small motor has a "slinger" that scoops up oil out of the pan and splashes it on the moving parts. It won't hurt your unit to drain the water, but it will run a little hotter.
@davebartosh5 3 жыл бұрын
Glad I watched this. My AC is over 5 years old and never serviced. I just wash the filter. It started making the horrid grinding sound and blows out hot air. I thought it was a lubriction issue, which may be part of the story. But when I heard your compressor, it's the same exact sound I'm getting. I'll try a kit and report back.
@shaunthorton7090 4 жыл бұрын
Jordan thanks Man ...good stuff..local electric shop was going to charge me 68 dollars a can of freo n to put in my A/C . You saved us all a shit ton of money. With the Heatwave sweeping the country here in July 2020, i think your saving some lives as well making you a 🦸♂️ superhero...up up and away 👍✌👏🤝🙏😇
@JodBronson 4 жыл бұрын
You are welcome! Check Description, there are more !!!
@chipwright6193 2 жыл бұрын
I have an 11 year old LG unit that I bought new. It's worked great up unit this year. Now it's starting to have some troubles. I've recharged the A/C in my cars plenty of times and was thinking of attempting it on my window unit as well. Thanks for listing the part numbers for the Bullet Piercing valves. I wasn't sure how I was going to tap into the unit. Thank you for the video!
@JodBronson 2 жыл бұрын
You are welcome!
@charlesbertbibit6758 4 жыл бұрын
ure doin it right bro..but yup actually u have to refill the r134a till 70psi - 80psi (r22 should be more cooler)...and one more bro,the piping line got frosting its just because of the pressure of the gas u've refill and it will frost until the gas pressure refilled by 50psi and aboved..dont have to be afraid after this if u saw ur home a/c gets frosting ,my solution is check for gas pressure whether its drop to 50psi and check too if there is leaking around somewhere from ur a/c units...Keep it up!!& dont stop learning bro...its good to know some knowledge about it than know nothing,is it right??im doing this a/c things for 10 years right now,but still try to learn more and still install,repairing a/c..thumbs up for u bro...liked your videos too...👍👍🙌🙌👏👏👏🍻🍻😇
@JodBronson 4 жыл бұрын
You are right on the Pressure... I was 14 years old when I first did this and inexperience, I've learn a lot since then. I document all of these since 2016 and I have the Play List here if you want to check that out. kzfaq.info/sun/PLu6UVmXTZzOjYEMtytG5WMgthlA8aukaQ
@18magicMARKer 5 жыл бұрын
Hey just wanna say keep making videos and repairs! especially A/C stuff...buy broken ones and fix it!? We need more videos like this. I threw out an old a/c and bought another one and now it's not as cold so I'm gonna try this. Thanks!
@JodBronson 5 жыл бұрын
Everything you need is in the " Description ".
@JodBronson 5 жыл бұрын
I also make bunch of other stuff too... Check out my Channel under " Video ", you might get something else useful. :)
@flackratchettheromperstomp8224 4 жыл бұрын
Yo, thank you so much for this video. I was going nut trying to find a video that fixed this issue that didnt require all the expensive hvac tools. Dont listen to all the haters. Thank you again.
@JodBronson 4 жыл бұрын
You are welcome!
@brandoncarlsness3080 3 жыл бұрын
This work for you ?
@BobWarnerBarn 6 жыл бұрын
Thanks for your dedication.....:)
@JodBronson 6 жыл бұрын
+Bob Warner - You are welcome and I hope you got something out of it!
@johnnyneston4664 4 жыл бұрын
Awsome work dude thanks for the video.
@JodBronson 4 жыл бұрын
Thankx! It's still working. This is the 4th Season using. Here is the 2019 Update: kzfaq.info/get/bejne/Zq-nmbNlsqfDmKc.html
@brycesstuff 2 жыл бұрын
Your accent is a trip, nice vid 👍
@veskovesilev2019 Ай бұрын
I am pretty sure the water pan at the bottom is supposed to fill with water/condensation and the fan sprinkle it on the condenser coil to keep it working strong on hot humid days. When you drill the holes it loses its cooling ability on those days. I know the coil bathing in acidic water makes it corode faster but mabe sprinkle a teaspoon of baking soda in the pan.
@JodBronson Ай бұрын
The Fan will keep it cool enough so I would rather not take the chance on corrosion of the copper coils.
@robertpolito6139 4 жыл бұрын
Thank you, for your help and honestly
@JodBronson 4 жыл бұрын
You are welcome! If you do it right, it will last a long time. It's been 4 years, it's still cold.
@alecruzcruz9047 2 жыл бұрын
*Great and Easy to instal **Fastly.Cool** Low noisy*
@rogerlimoseth4790 4 жыл бұрын
Thanks for the video. I've done automobiles but not a window air. Forget peoples negative or how to comments. If they were pro's. They wouldn't have searched, found and view your video.
@JodBronson 4 жыл бұрын
Hahahahaha, you're right !!! ❤️❤️❤️❤️❤️❤️
@132900dx Жыл бұрын
This was so helpful bro. Thank U a million times. Be well I needed this.
@peterhipple9732 Ай бұрын
Yeah, thanks to you screwing it up, and not knowing a thing about what you are doing.lol . thanks to you I learned a lot, there's always trial and error. Thank you for the lesson. I did what you said and it worked like a charm. Thanks
@JodBronson Ай бұрын
You are welcome!
@peterhipple9732 Жыл бұрын
Thanks, this video was tremendously helpful
@JodBronson Жыл бұрын
You're welcome!
@DJPenguino51 6 жыл бұрын
45 PSI on the low side is good for R134A as per the pressure / temp chart. That will give you 40 degrees at the metering device (orifice / capillary tube / expansion valve). 110 PSI is your "static" pressure before you switch on the unit. You can charge with the can inverted but ONLY in short spurts. Otherwise you can slug the compressor (not good).
@JodBronson 6 жыл бұрын
+Ronnie Bradley - Here is the Video I updated after I upload this Video. I explain it in the newer updated Video here: kzfaq.info/get/bejne/h8qAm7BorrzRYZc.html
@nonya68 5 жыл бұрын
Short spurts up to where?
@rvm4574 Жыл бұрын
Can you add r134-a into split units and on top of the existing refrigerant? I installed the split unit 2 years ago and it held vacumn over night. So I don't think I have a leak but I think they just put enough freon in units. My opinion. But now it will slightly freeze up. I checked and cleaned coils and they were in great shape.
@DJPenguino51 Жыл бұрын
@@rvm4574 I would advise against it.
@kellyhoneyfeloncdljourney Жыл бұрын
Thank you for making this video.
@JodBronson Жыл бұрын
My pleasure!
@jeffreymorrow2665 5 жыл бұрын
I wasn’t aware of that. It seems like that would make charging your a/c a lot easier and cheaper. I didn’t know that. I’ve charged my car before and it was pretty easy.
@JodBronson 5 жыл бұрын
Hi, yes it's the same principle. As long you follow the Specs on the Meter Gauge for the "Type" of Gas you are using.
@wandat46 5 жыл бұрын
I had one refilled and it lasted for 5 years. Well worth the money.
@JodBronson 5 жыл бұрын
@@wandat46 - Nice to hear that is lasted that long! This is my 4th Season so far since I refilled it. It seems to be holding up since, but we will see.
@Poohdaddymagic 4 жыл бұрын
Lol in your first video you didn't give a shit if it blew up and killed you now you say the icy lines scared you😂😂😂 Good stuff man👍🏼
@JodBronson 4 жыл бұрын
LOL - Yes, but not scared of dying. LOL
@THEGAME-tz6yu 4 жыл бұрын
Great info thanks.
@JodBronson 4 жыл бұрын
You are welcome!
@atalakeanumonarshi129 4 жыл бұрын
Some advice for you : - You can know if you have low pressure / refrigerant on your air conditioner if the refrigerant line is frosting. - I suggest to dip the refrigerant can in a water ( normal tap water or even warm water ) to heat up the can so that way all of the refrigerant will be flowing into your air conditioner. - Don't underfilled your air conditioner because the compressor will work really hard to pump your "underfilled" refrigerant. It will kill the compressor much faster. - if you have an condensation on your refrigerant line, then congratulation! You've just successfully refilled your air conditioner. Well I'm not an expert, but I know quite a lot of experience from refilling my own split system using R410-A :-D I also have some window air conditioner (5000 btu )
@felipetorres7222 4 жыл бұрын
Si if you have condensation in the cooling coil the refrigerant is good?
@merry-g7896 Жыл бұрын
does the type refrigerant used to refill need to match type on the label?
@hgfcxz721 5 жыл бұрын
Most informative video so far.
@JodBronson 5 жыл бұрын
Thank you! Hope that will help further and that was my intention.
@oscaralarcon6695 5 жыл бұрын
Good video. should be at 60 to cool. Thanks we're all learning too.
@JodBronson 5 жыл бұрын
I would love to go to at least 60-70, where the " Green Zone " is in the Meter. But whatever I do, it will " Neutralized " at about 50 PSIG. Here is the Update August 2018 Video explaining my findings: kzfaq.info/get/bejne/h8qAm7BorrzRYZc.html
@jamesjacksonpolarplay 19 күн бұрын
You the man
@Roboticdoughbull3k 4 жыл бұрын
Fix only cost 5 dollrahs thats awesome! Good tips
@JodBronson 4 жыл бұрын
I no longer gets alert and don't know why :(((. Well $4.88 at Walmart!
@ChangeViewZ 19 күн бұрын
I just did this with my Portable Air Conditioner. Used R134A, about 2 full cans. Its blowing cold air now.
@JodBronson 19 күн бұрын
Awesome!
@jubone2 Жыл бұрын
Thanks, Great job...
@erictheviking6832 4 жыл бұрын
YOU HAVE TO PURGE THE SYSTEM, THEN WITH COMPRESSOR RUNNING YOU MUST TURN THE CAN UPSIDE DOWN AND FILL TO BLUE AREA
@patmorales4159 3 жыл бұрын
Can u add 134a freon to a 410a air conditioning system??
@elvispressedtalot9899 3 жыл бұрын
This video just show cased the info you seek. he speaks it from the start.. 134a on a 410a. So im getting the same 134a refrigerant for my runined AC12000BTU. Drilled a hole on the bottom of the condenser ! but will be using epoxy with a clamp that tightens with a 8mm socket. Fk'd up when drilling extra holes. "Got LAZY and purged it unwillingly"!
@426superbee4 4 жыл бұрын
need 1 more can Damit make your mind, temp 45 to 49 is good YOUR GOOD
@chrisleech1565 6 жыл бұрын
Hey JB! So my gauge set arrived today, and I am out working on a few old units. No choice but to use some old R22 stock and I am not happy about it. Big one, average sized and a portable model as well :-) Dogs ate the power cord and the heat discharge hose on that indoor model. So the only thing I find that looks different between manufacturers is the routing of various outer diameters of inlet tube in each of the compressors. They mostly have the same sized casing yet the capacity to cool is all over the map. Interesting .... Which is the return or low side that we are working with? Is it the line from the condensor (cold side) with what I am assuming is a pressure drop?
@JodBronson 6 жыл бұрын
Look below " +Matthew Sottilare ", he asked the same question.... Read that thread!
@JodBronson 6 жыл бұрын
It must be on the LOW side! Follow your Lines from the COOL / LOW side to the Condenser. Anywhere on that would be fine! :))))
@rubenrivera2600 5 жыл бұрын
You need to go by temperature as well as pressure 40 psi is definitely to low keep at it though you will get it ultimately you want your evaporator coil at 40-47 degrees which is above the freezing point and plenty cold enough that you won't have any issues any hvac guys out there didn't learn this overnight practice and studying makes perfect
@JodBronson 4 жыл бұрын
:)
@patmorales4159 3 жыл бұрын
Can u add 134a freon to an air contioner thats asks for 410a ??
@maltesemike9114 4 жыл бұрын
My mom's ac was warm n cold more warm so best sulotion I put my water hose on low spray n put on top of the AC n let the water spray on low in it cools the unit I leave on thier all day just letting water dripp into it ,of course I cleaned it..but gonna try that filling it with freon gonna buy adapter..thanks n hope my will help
@JodBronson 4 жыл бұрын
Test with the Adapter first to see where your Freon at. From there, read the label to see how much you will need. Also, the label will tell you the right gas to put in too. If there is a leak, they sell leak seal too. NOTE: This is for refill only and not release any gas in the air, you will violate the EPA's rule. ;)
@javiergonzaleztoledo 5 жыл бұрын
Why does he sounds like Katt Williams the comedian
@JodBronson 5 жыл бұрын
LOL, I had to look it up and never heard of him. He's making millions... I don't think he will be filling his Air Conditioners! LMFAO
@JodBronson 5 жыл бұрын
@Bob Ross- Yo nigga Bob! "DAS IT!" Don't you got some painting to do my nigga? 🤣🤣🤣🤣
@d.n.3652 4 жыл бұрын
Javier Gonzalez a pimp named slickback
@dobycarter8996 4 жыл бұрын
@@JodBronson you should not be using that word...
@roynelson7613 2 жыл бұрын
@@JodBronson you didn't say nothing wrong you did not have an ER on the end of that so in my eyes you said nothing wrong a lot of people use that word everyday and it is accepted by a lot of the black community I have black in my family it don't bother them I don't say it but in my eyes you said nothing wrong
@stanfen1966 4 жыл бұрын
Thanks for the info ..I'd been wondering if I could refill my window unit myself or was it time to buy a new one ..
@JodBronson 4 жыл бұрын
Best thing to do is Test Leaks first. If the unit still AOK, you can do it. I refill this in May-2016 and it's the 4th Season, still working. I have the 2019 Update Video here: kzfaq.info/get/bejne/Zq-nmbNlsqfDmKc.html
@BeginnerGardenerZ8B 3 жыл бұрын
Jordan, do you know anything about recharging R410 window AC units? I have a AC unit that blows cool but not that well anymore and I am wondering if I can use R143a as a replacement.
@JodBronson 3 жыл бұрын
They do sell R410 and you can use the same principle to do it.
@18magicMARKer 5 жыл бұрын
why is it for entertainment? seems every educational! thanks, I never thought to recharge it!
@JodBronson 5 жыл бұрын
" Entertainment Purposes " for some folks ;)
@nbarrager 3 жыл бұрын
Because refrigerants are damaging to the environment and in many countries you have to be certified to handle them. I don't know why anyone can purchase small cans of 134a.
@2bnax Ай бұрын
THE PURPOSE OF THE LITTLE TRENCHES, WHERE YOU DRILLED THE HOLES ARE TO LEAD THE WATER TO THE CONDENSER FAN. THERE'S A RING AROUND THE FAN BLADES (SLINGER- RING) THAT PICKS UP THE WATER AND "SLINGS" IT AGAINST THE CONDENSER TO MAXIMIZE ITS COOLING EFFICIENCY- THIS HELPS THE FAN IN CONVERTING THE HIGH PRESSURE GAS TO A LIQUID AS PURPOSED. ALSO,I DIDN'T SEE YOU PURGE (OR CONTINEOUSLY FLOW) FREON THROUGH THE GAUGE LINE TO AVOID PUSHING AIR INTO THE SYSTEM. NEVERTHELESS, NOT DOING SO GIVES YOU A HIGHER "FALSE" GAUGE READING & IT INTRODUCES MOISTURE INTO THE SYSTEM, THE MOISTURE CAN CAUSE FREEZE-UPS INSIDE THE LINE CAUSING RESTRICTIONS; IT ALSO REACTS WITH THE OIL WHICH CREATES ACID & DESTROYS MOTOR WINDINGS. I ENJOYED THE VIDEO NEVERTHELESS !!!!!😇☺☺
@JodBronson Ай бұрын
DANG, YOU TALK A LOT!!!
@2bnax Ай бұрын
@@JodBronson SORRY! ITS USEFUL INFO ,ONLY THOUGHT YOU & YOUR LISTENERS/ READERS WOULD BE INTERESTED! I APOLIGIZE!
@JodBronson 18 күн бұрын
@@2bnax - HERE'S A RING AROUND THE FAN BLADES (SLINGER- RING) THAT PICKS UP THE WATER AND "SLINGS" IT AGAINST THE CONDENSER TO MAXIMIZE ITS COOLING EFFICIENCY.
@2bnax 5 күн бұрын
@@JodBronson I RECENTLY SENT YOU A REPLY LEADING YOU TO VIDEOS THAT EXPLAINS WHAT I POSTED IN MY REPLY ABOVE (SLINGER RING ) .... IT SEEMS YOU'VE ERASED IT, NEVERTHELESS, I HOPE YOU'VE ACCEPTED THEIR EXPLANATION - WHICH IS THE SAME AS MINE!! MAYBE YOUR READERS ARE INTERESTED
@kellykatcher7547 4 жыл бұрын
Ok hmm.. I have been told that you CAN NOT put R134a into a R410a system.. when did that change?
@JodBronson 4 жыл бұрын
It changed when I made that video 4 years ago. LOL. Still using the SAME AIR CONDITIONER as we speak, since the refill. In the "description", there is a link to the "Original" video, you can check it out.
@kenyonmcclain560 3 жыл бұрын
I'm about to do mine this afternoon using r134
@ReneStover 4 жыл бұрын
When the coolant level gets low, it ices up!
@brycesstuff 2 жыл бұрын
I'm a maintenance manager at a very large facility, this is correct, low refrigerant or clogged filters are what freeze up coils.
@MichaelaPsycho7713 Жыл бұрын
@@brycesstuff what are the signs when it starts to get low I'm having problems with my window air conditioner
@brycesstuff Жыл бұрын
@@MichaelaPsycho7713 im just familiar with the bigger commercial units, but I imagine its the same with smaller ones. If there is ice on your coils inside or out, I imagine you have something slowing air movement or low freon
@MichaelaPsycho7713 Жыл бұрын
@@brycesstuff dang it I'm gonna take it apart and see what's wrong with it it was just making a weird noise out of no where and starting dripping water into the fans and the vents then ice was spitting out too I'm right now working on it worse comes to worse I have my neighbor to help me he works with the ac/heater company he might can help too
@MichaelaPsycho7713 Жыл бұрын
@@brycesstuff I have a question while I was cleaning all the mold out I was holding it on the edge to get all the water out of the drip tray the motor the black motor right next to it there's a small tube of Cooper it was attached with some typed of black molding thing was protecting it I tired to put it back on carefully but it all crumbled I couldn't save it it was that bad like 15 pieces broke off of the molding is that important or no?? If it was what else can I use to protect the Lil tube
@TheGodfather101 3 жыл бұрын
A window unit uses 410a. 134a doesn't use the same oil and operates at lower pressure. Less efficiency. Will work but will whither over time. Remember compressor are best rated for specific use.
@JodBronson 3 жыл бұрын
Thanks for sharing
@boydoomging4091 5 жыл бұрын
So you recharge the ac unit that came with R22 with the new R314a and it works. I was wondering if this will work with the rooftop Rv ac system that has R22.
@JodBronson 5 жыл бұрын
Hi, yes that is correct and that was 3+ years ago! It's still working today, I just updated a new video here: kzfaq.info/get/bejne/Zq-nmbNlsqfDmKc.html
@JodBronson 5 жыл бұрын
Here is the " Original " Video of it all merged together. kzfaq.info/get/bejne/eZiUm5Rzq8u5fKs.html
@JodBronson 5 жыл бұрын
You can get R22 and refill it easily too, check eBay. If you want it just like the " Original " Gas R22. You can use the Port + Tap Bullet Valve and refill it. That would work also, just follow the Meter and make sure the compression is on correspond to your Gas Type.
@kylewoodward7078 4 жыл бұрын
@@JodBronson did you drain all the r22 out before adding the 134a?
@JodBronson 4 жыл бұрын
@@kylewoodward7078 - Nope !!! It wasn't cooling, so I knew it was low.
@edardon16 4 жыл бұрын
hi Jordan,i have a cuestion the fast adapter of 1/4 to 8 v1 is cheap in China is safe to order from there,if so how long it take to be here in the us i hope you know if i order from China less than $ 2 from here, any state $10 or more
@JodBronson 4 жыл бұрын
Sorry not sure :(((
@ronremer6545 5 жыл бұрын
Do u know what PAG oil is!? U released pressure in the system meaning the refrigerant chanrge AND OIL CHARGE.. lubrication for the compressor
@JodBronson 5 жыл бұрын
Well, this AC was not working, so I took a risk. This AC was filled about 3 Years ago. It's still working when I put it away last Fall. I did an update Video in the description, check it out. I will update another Video in the Summer 2019.
@kennethgrimes5494 18 күн бұрын
Jorden let's just have fun
@JodBronson 18 күн бұрын
YES!
@palmtree5544 4 жыл бұрын
Read the label on the ac. It will tell you how many ounces the ac uses.
@JodBronson 4 жыл бұрын
I was like 14 yo when I did this, so I didn't really know anything/much. But later this year, I went into further and I've made a Video here: kzfaq.info/get/bejne/Zq-nmbNlsqfDmKc.html
@alfredo9684 2 жыл бұрын
I have a portable air conditioner brand is midea and I guess it’s low on refrigerant where do I get the 134a
@peterpantages9962 2 жыл бұрын
so you put the bullit valve in high or low pressure pipe? going to compressure or from? thanks
@JodBronson 2 жыл бұрын
LOW
@Oddfellowspodcast 2 жыл бұрын
Like this video alot
@pdrnd5367 4 жыл бұрын
Im new to this. Do different ac window u its use different refrigerants? Or standard?
@JodBronson 4 жыл бұрын
YES, depend when it's made too. There is a small label on the Unit. Look at it, it will tell you.
@dashawngary824 4 жыл бұрын
@@JodBronson can i use r134a if it says r410
@JodBronson 4 жыл бұрын
@@dashawngary824 - If you want to do it right and correctly. They do sell R410 and you can use that.
@sh33nst3r 3 жыл бұрын
So I also have a window ac unit. I just sealed the puncture hole. Everywhere I read it says only use r410a. But all I see is people using r134a. Have you had any issues? Cause if not I can finally just charge it at work. I’m a mechanic so we have a machine for r134a.
@JodBronson 3 жыл бұрын
If you want to do it right and correctly, they sell R410a on eBay. You can use that and it's correct and the EPA won't get you.
@JodBronson 3 жыл бұрын
Also, since you have Recovery Machines, you can do it correctly. Make sure to Vacuum the System, then Refill accordingly.
@randymiller3583 2 жыл бұрын
Lol good job on the entertainment only 👍
@fustratedfisher 6 жыл бұрын
If I could make a suggestion take a hvac class. You shouldn't release the refrigerant into the atmosphere. 135- and 410 is not as bad to the ozone but it will help the greenhouse gas effect. You should recover the refrigerant into a recovery tank then test the system with nitrogen to see where the leak is. Fix the leak then vacuum it to 500 microns. Then refill it with the correct amount of refrigerant that's on the data plate. Ac systems don't loose refrigerant just by age there is a leak somewhere...
@JodBronson 6 жыл бұрын
+Shane Aubuchon - This Video is for Entertainment Purposes Only!
@ChrisJohnson-gq3uu 5 жыл бұрын
Learn how to spell jerkoff or just shut the fuck up.
@HappySlave1 5 жыл бұрын
@@ChrisJohnson-gq3uu He should learn how to spell jerkoff? What pray tell will that achieve?
@jeffreymorrow4966 5 жыл бұрын
R134a doesn’t have to be recovered. If that was the case they would require you to have a license to buy it like r12 or r22. You don’t need an have course for that. What’s important is you retrofit the machine of going from r22 to r134. This is interesting because I might try to recharge my unit.
@jeffreymorrow4966 5 жыл бұрын
They freeze up when Freon is low.
@Ricoriccoreco Жыл бұрын
So which Val do you turn off first the can or the line as you have completed the service
@JodBronson Жыл бұрын
2018 Update Tips - Refill follow up + Gauge Adapter tips Video: kzfaq.info/get/bejne/h8qAm7BorrzRYZc.html
@joseorta9928 4 жыл бұрын
The line froze up cuz the system dont have freeon...and you might have a leak...on the line...
@degregrio 4 жыл бұрын
New at this but I have learned a lot from this video . I realize you are making this video for entertainment purposes only but I always heard never put R134a into a unit that requires R 410a . meaning in the long run R134a can do damage to the system . Since doing this have you had any problems with the unit ? I am considering doing what you did putting in R134a into a unit that requires R410A . Any input would be helpful .
@feddersairdude 4 жыл бұрын
Not at all a good idea. Take it from someone who has experience in the field. You cannot just mix or replace refrigerant types, they operate at different pressures and temperatures depending on the chemical composition of the refrigerant. Putting r134a (a low pressure and temperature refrigerant) into a high temp unit such as a window unit will destroy the compressor, either by slugging or overheating.
@JodBronson 4 жыл бұрын
I refill this in May-2016 and it's the 4th Season, still working. I have the 2019 Update Video here: kzfaq.info/get/bejne/Zq-nmbNlsqfDmKc.html
@Kidd-nq4fg 4 жыл бұрын
I think the unit came with R22 which is a low pressure refrigerant so idk
@dickchainsaw8195 3 жыл бұрын
Great job
@JodBronson 3 жыл бұрын
Thankx!
@dickchainsaw8195 3 жыл бұрын
I punctured a hole in a copper so I got a silver solder and refill
@JodBronson 3 жыл бұрын
@@dickchainsaw8195 - YES, make sure to "Vacuum" it out to have negative pressure.
@dickchainsaw8195 3 жыл бұрын
What do you mean vacuum out
@JodBronson 3 жыл бұрын
@@dickchainsaw8195 - You have to suck out all the Air in the line before you can refill it.
@BaMFusco 4 жыл бұрын
I read somewhere that your supposed to drain the old gas whatever is left before adding new gas. Is this true? Do you know?
@JodBronson 4 жыл бұрын
Right, the right way is to take everything out and the system is empty. But when I first did this, it was about to be thrown out. So I didn't really care because I started to see people filling them with R134a. When I saw that, about 4 years ago.... Small Air Conditioners and Wine Coolers were filled with R134a. That's what gave me the idea to do it. Surprisingly, this is the 3rd Season since and it's still cold. NOTE: If you want to see the original Video... It's in the link and in my channel... Just search for R134a and the oldest video.
@BaMFusco 4 жыл бұрын
Jordan Bronson ok how Are you supposed to empty the old gas? Do you know how? I can’t find it anywhere. I did everything you did but the gas doesn’t seem to be coming out of the can.
@JodBronson 4 жыл бұрын
@@BaMFusco - You have to bring it to a car shop that specialized in AC, they have something called " AC - Refrigerant Recovery Machine ". Also, it's against the Law to release it in the Air. NOTE: That is why I refill it, since I knew it was empty. The AC Refill Gauge should tell you how much Gas you have..., follow that Gauge.
@dustinmckenzie2078 Жыл бұрын
Holy kwap. Owkay. Lol. Awesome video tho brother!
@JodBronson Жыл бұрын
Glad you enjoyed
@josejpl69 Жыл бұрын
Can you buy those r134 cans on autozone for cars??? Those that come with a hose??
@JodBronson Жыл бұрын
*Everything you need is in the DESCRIPTION + PINNED POST !!!*
@truthsmiles 5 жыл бұрын
So... it's been a year since you uploaded this video... is it still working? If so, are you still getting 20° cooling?
@JodBronson 5 жыл бұрын
YES! Using right now! :)
@JodBronson 5 жыл бұрын
Another updated Video here: kzfaq.info/get/bejne/h8qAm7BorrzRYZc.html
@truthsmiles 5 жыл бұрын
Jordan Bronson - Nice! Have you tested it this year for the same 20 degree temperature drop? I’m curious to know if it’s still as efficient. Also, have you tested the amperage used by any chance? I know it’s not supposed to work, but I’ve always wondered if you can do it. I’m very excited by your video. I think I might be able to suggest some “better practices” but overall, whether by luck or skill, it seems to have worked out for you. So cool haha.
@JodBronson 5 жыл бұрын
@@truthsmiles - I will make a Video today :)
@truthsmiles 5 жыл бұрын
Jordan Bronson - Awesome! When you make it, can you show the label from the unit that shows the R-22 (and how much was in it originally - should be some ounces, or lbs and ounces), and then also tell us how much total R-134a you think you’ve put in? I understand it won’t be exact but an estimate would be great :)
@garciaperezandres1485 5 жыл бұрын
Bro. That Dog is seeing a cat or something he got the that hair all up lol.
@JodBronson 5 жыл бұрын
LOL, he's always like that. Once he see something he doesn't like, his back hair all raised up! LMFAO 😄😄😄😄😄😄😄😄😄
@JodBronson 5 жыл бұрын
You should see him in this Video here: kzfaq.info/get/bejne/eZ2gptVq0NPTYJs.html
@williamlangley2044 Жыл бұрын
Did you draw a vacuum on the system before putting in the freon?
@JodBronson Жыл бұрын
To do it properly, yes it's best to.
@hector.c2337 4 жыл бұрын
Can u replace R410A for R134a ? On a window ac
@basharmo2065 Ай бұрын
I have the same question what did you end up doing
@bugbugpuppy806 6 жыл бұрын
Where do you get the correct fitting to put in the refrigerant?
@JodBronson 6 жыл бұрын
+Bugbugpuppy - Try pausing the Video at 0:05 - Link: kzfaq.info/get/bejne/sMtphrqk3Z6tXZs.html
@bugbugpuppy806 6 жыл бұрын
Jordan Bronson ty
@bugbugpuppy806 6 жыл бұрын
Jordan Bronson ha ha ha I’m the description ok
@JodBronson 6 жыл бұрын
+Bugbugpuppy - LOL
@ndoghouse6853 Жыл бұрын
did you fill r134a on top of r410 or did you evacuate 410 first?
@JodBronson Жыл бұрын
It was R22 Unit. Then I refill it with R134a AFTER I found out it wasn't cooling. Original Video can be found in description.
@stitchedwithlovebyloretta4684 4 жыл бұрын
Mine window AC needs refilled. Do you have to be licensed to do this?
@JodBronson 4 жыл бұрын
This Video is for Entertainment Purposes Only!
@GoldSeals Жыл бұрын
I believe there is moisture in the system.Did you use a vacuum pump to pull out the moisture?This could be why its freezing up.
@JodBronson Жыл бұрын
Should've watched the video !!!
@Jdcv99 4 жыл бұрын
Since theres a hole on the coils, im working on soldering it and refilling it with some freon.
@JodBronson 4 жыл бұрын
I no longer gets alert from KZfaq and don't know why :(((. Anyway, pressure tested it first before filling it.
@waynepierce7305 Жыл бұрын
@@JodBronsonhow did you pressure test it and did you vacuumed it out before fillingI don't have a way to vacuumed it out is all..
@JodBronson Жыл бұрын
@@waynepierce7305 - Hook up your Meter Guage and you will understand everything!
@JuanBautista-su3qw Ай бұрын
Remember that
@jonleone777 4 жыл бұрын
Perhaps I'm missing something here, but if your refrigerant is low in a sealed system I would imagine there is a leak someplace. What good is pumping more refrigerant in if it is going to leak out again.
@JodBronson 4 жыл бұрын
You are missing something for sure !!! 😂❤️😂❤️😂❤️😂❤️😂❤️😂❤️😂❤️😂❤️
@JodBronson 4 жыл бұрын
NOTE: You know there are " Leaks Seal " right?
@Saint696Anger 3 жыл бұрын
Hey bud it's been awhile. With the sealant added to the 134a cans have you ever experienced clogging issues after using it with the sealant additive?
@JodBronson 3 жыл бұрын
Nope. To be honest, I don't even notice the differences.
@donalddunn7362 5 жыл бұрын
Psi should be 35 to 40 max when it's on and you got to have the ac when it on full blast and then charge the unit and then stop at 40 PSI don't go past it
@JodBronson 4 жыл бұрын
No matter what I do, it won't go over. Some how it " neutralized " since the can is at 50 PSI?
@perez2877 Жыл бұрын
Can I chqr by weighting the refrigerant, some compressor have the amount,right?
@JodBronson Жыл бұрын
You need the Gauge Adaptor so it can tell you how much you have in it under compression. Weight is just to see how much, but best is by the Guage Adaptor !!!
@perez2877 Жыл бұрын
@@JodBronson oh yeah I know we can use it also the manifold gauge for see the pressure, just I asked it thank you homie
@skyman2002 2 жыл бұрын
Closed loop system shouldn't require additional refrigeration. It may be a good idea to find a leak detector, to fix leal. Could save time/frustration.
@michaelbrown9198 6 жыл бұрын
Hey... thanks.. because I have to do the samething and the A/C repair guy wants to charge me alot
@JodBronson 6 жыл бұрын
+Michael Brown - If you have the " Port ", you can do it easily and follow the " Gauge Adapter " if you have one. If not, just Charge little by little... You can always add more :)))))))))))))))))))))))))))))))))))))
@michaelgnieski4181 4 жыл бұрын
How much is alot?
@harrycrafter18 2 жыл бұрын
I’m sure that unit is r-22 and this ain’t good for it at all and it won’t function properly but, it’s still interesting to know how a different refrigerant reacts ina system not designed for it. Still it would be best to have it charged wit the proper stuff
@JodBronson 2 жыл бұрын
YES, if you want to do it properly, use R22 instead, that is all. This video was to prove that YOU CAN refill with R134a. By the way, smaller AC and Wine Cooler are now filled with R134a. Check it out when you are in the big box store next time, you will see it on the label itself.
@harrycrafter18 2 жыл бұрын
@@JodBronson Yaa that’s what I’m saying, I’m entertaining the HVAC felid currently and have a collection of small units to tinker with. And r-134 was common in cars, refrigerators, dehumidifiers, and other small appliances and still is in some cases. But is currently being phased out for some reason. Along with r-22. Even thou 22 was the absolute GOAT, it’s being replaced bc the epa can’t keep its nose outa shit it don’t belong it. But ya interesting
@JodBronson 2 жыл бұрын
@@harrycrafter18 - They suppose to replace R134a with 1234yf, which is even safer. All the hypes and now it's back to R134a. :/
@judymayhall9096 Ай бұрын
If the copper line is frosted, that means it's low.
@johnz8886 5 жыл бұрын
If the suction side is frosting or icing like on a outdoor unit it's low on refrigerant. And you're to only use refrigerant that is designed for the compressor!
@nonya68 5 жыл бұрын
John Z how do you know which to use? Is the 134a incorrect?
@johnz8886 5 жыл бұрын
@@nonya68 there will be a label telling what type of refrigerant and how much refrigerant the system requires
@johnz8886 5 жыл бұрын
@@nonya68 it is recommended if you do change refrigerants. is to pull-down a vacuum on the system to dry the lines out, and get any excess oils that are not compatible with other refrigerants that can also damage the compressor.
@MS-sh4xt 6 жыл бұрын
Does it matter where you put the tap valve ?
@JodBronson 6 жыл бұрын
+Matthew Sottilare - Yes!
@JodBronson 6 жыл бұрын
+Matthew Sottilare - It must be on the LOW side! Follow your Lines from the COOL / LOW side to the Condenser. Anywhere on that would be fine! :))))
@DJPenguino51 6 жыл бұрын
ALWAYS charge on the "suction" side (larger line). Never, EVER on the liquid (high) side.
@JoshuaG 5 жыл бұрын
I believe that you always put it in the line thats the cold one not the hot one
@nonya68 5 жыл бұрын
Jordan Bronson how can you tell which is which? Is the ‘covered’ line the high? Exposed low?m
@007squirreldehne2 2 жыл бұрын
You got a lot of air pressure built up in there that you should have vacuumed down a little bit before you added but yeah you're close
@mytyhwh 3 жыл бұрын
find it hard to believe that unit is 134a ,thats for cars. the compressor oil probably wont let 134 mix because its meant for another oil. 410 a probably (just heard you say it) you have the right idea , there are many informative vids about ac recharging. pls where glasses (safety) refrigerant will turn eyes to a candle wax kinda stuff should it happen to spray your face. be carefull.
@JodBronson 3 жыл бұрын
Believe it or not, the can itself only 40-50PSI. So regardless how I did it, I can't overflow, LOL.
@ruthshaffer3906 2 жыл бұрын
I done all this but my can was still full it wouldn't go into my coolant where I pierced it
@WalterKnox 4 жыл бұрын
when it frost up that mean it is under filled, the pressure is lower and it gets too cold, if it is overfilled the metal case on the compressor would sweat and it would not cool properly.
@JodBronson 4 жыл бұрын
Listen?
@WalterKnox 4 жыл бұрын
@@JodBronson i did... you were correct it was under filled and you needed to ad more, i was just explaining why it does freeze up when it is low.
@JodBronson 4 жыл бұрын
@@WalterKnox - This Video was done in June 2018. I since " update " more.... See here: 2018 Update Tips - Refill follow up + Gauge Adapter tips Video: kzfaq.info/get/bejne/h8qAm7BorrzRYZc.html 2019 Update Video: kzfaq.info/get/bejne/Zq-nmbNlsqfDmKc.html
@maureenu3047 4 жыл бұрын
Where are you from? Your accent sounds like Boston maybe...
@JodBronson 4 жыл бұрын
100% Boston
@abelruiz4524 Жыл бұрын
Would anyone recomend a vacuum on the sistem before refill?
@JodBronson Жыл бұрын
If you want to do it correctly. YES !!!
@feildcar4578 Ай бұрын
Don't drill holes in it. You're wrong the fan slings the water onto the coil to get evaporative cooling that maximizes the efficiency of the air conditioner you will get lower temps with water in it. They are designed to work with water in them.
@JodBronson 18 күн бұрын
You forgot the fan?
@kittybok Жыл бұрын
Your voice is sick
@JodBronson Жыл бұрын
*I LOVE MY VOICE! Why? Biii pooo laaa hates it! LMFAO* 😁😆🤣😂😂
@jasonjeffers3929 4 жыл бұрын
Where did you get the pics that tapes in you ac to fill it
@JodBronson 4 жыл бұрын
What pix?
@jasonjeffers3929 4 жыл бұрын
I done some research and some call it a bullet valve I think
@jasonjeffers3929 4 жыл бұрын
Did a update on phone and the auto correct is wacked up.
@JodBronson 4 жыл бұрын
Everything you need is in the Description + Pinned Post. Check it out and you shall see.
@zyrapagal6689 5 жыл бұрын
Your Compressor will burnt up dude 134a is for Refrigerator r22 is for airconditioner but it was fun to watch you doing it for entertainment Purposes😄
@JodBronson 5 жыл бұрын
Here.... Watch the Video I did about 3 Years ago.... All the Link in the Video of 5 - kzfaq.info/get/bejne/mc-RrMmfxr-4mnU.html
@JodBronson 5 жыл бұрын
By the way, it's still working last fall... I will update another Video this year, Summer 2019.
@JodBronson 5 жыл бұрын
@@chefchutardo5215 - Talking about "brain". You can't even complete a Sentence/Paragraph correctly! *Nigga, take your own advice and take some "English 101" classes!* LMFAO 😂😂😂😂😂😂😂😂😂
@fayaapatindol3258 3 жыл бұрын
im injoy this video watching i know this video is but i like cause man not seruios so vrry entertement video
@scottxp800 6 жыл бұрын
The gauge your using appears to be for R22, R134a should be in the 30-40 psi range for best cooling, R22 70-80 psi, R410a 110-120 psi.(on the low pressure side, approximately, ymmv) I had a hole in my R410a unit, repaired it and found 45 psi was the best it would cool on R134a. I switched to R152a and it cools better than R134a and draws 20-30 watts less power at around the same low side pressure. R152a is also known as "Dust off" I used a side can tap. If your above 45-50 psi your going to use more electricity with less cooling due to excessive high side pressures. My 6000 btu unit now uses less than 300 watts/hr when it was using nearly 600 watts on R410a, less pressure is less load on the compressor. I get an 18°F drop in temperature from inlet to outlet.
@JodBronson 6 жыл бұрын
+Scott Gaines - Thankx for the Tips :))))) - Unfortunately I don't have a Watt Meter, so I cant' measure it :(. But as far as for the Gauge, it's around 60-70 psi it said. Also, someone said I don't have to worry about " Ambient Temperatures ", since AC is different from Car AC. I did mentioned that from 30-40 psi, my Compressor was making a lot of noises. But when I got up to 50 psi or in this case 55 psi, I no longer have noises. NOTE: If you notice, no matter what I do, I wasn't able to get the psi to climb :(((. Currently, the psi in the System is around 55.
@HappySlave1 5 жыл бұрын
R152a is a great replacement refrigerant my only issue with it is it's a class 2 flammable gas mind you so is R32 and that has excellent cooling properties
@MrRnudalo 5 жыл бұрын
you right bro ,,,i agree that,
@kingbakr1940 Жыл бұрын
Can r134 work in a r410 compressor?
@JodBronson Жыл бұрын
You need R32. R410 banned by 2024.
@kingbakr1940 Жыл бұрын
@@JodBronson thanks
@jamescarroll0615 2 жыл бұрын
Hi, for entertainment purposes only, do you think an ac unit only needs a single can? Looking at portable ac refill.
@JodBronson 2 жыл бұрын
On the AC Unit, it will tell you how much is in there. Look for the SILVER Sticker!
@jamescarroll0615 2 жыл бұрын
@@JodBronson sorry if this is a dumb question but how do I purge what's already in there? Thanks.
@JodBronson 2 жыл бұрын
@@jamescarroll0615 - Bring it to an Auto Repair Shop, they can do that for you !!!
@daniela980 6 жыл бұрын
Where do I buy all the equipment? Home Depot, ??? Etc where?
@JodBronson 6 жыл бұрын
Try pausing the Video at 0:05 - Link: kzfaq.info/get/bejne/sMtphrqk3Z6tXZs.html
@daniela980 6 жыл бұрын
Shut. I forwarded the begging, got it thanks
@20x20Ghost 5 жыл бұрын
walmart
@starionluvr 5 жыл бұрын
Ok so i watched this and i do not understand how you have a hose that has a connection for the bullet pierce adapter and other end a can. My bullet has a fitting that isnt for my hose its for auto both sides.
@JodBronson 5 жыл бұрын
Watch this one: kzfaq.info/get/bejne/eZiUm5Rzq8u5fKs.html
@JodBronson 5 жыл бұрын
CLICK ON DESCRIPTION, READ DESCRIPTION!
@fustratedfisher 6 жыл бұрын
And yes 135 and 410 is a two part refrigerant and always fill in a liquid state so the can is yosidw down so the two parts go into the system in a liquid state not a vapor state
@JodBronson 6 жыл бұрын
+Shane Aubuchon - This Video is for Entertainment Purposes Only!
@AgeofReason 3 жыл бұрын
Imagine being mask wearing Shane.
@bobblack373 4 жыл бұрын
The person who said ~30lbs is not correct. that would be for a system designed to run off of r134a originally. this is either a r22 if it is older(uses mineral oil which can "coagulate with r134a".) or r410 which uses pve oil. it depends on temp but with r22 should be 58-72 psi depending on temp on high side you would see 240-280. r410 should be over 100. i am all for hillbilly repairs especially when all the so called pros say it's impossible.
NATES INTERACTIVE AUTO
Рет қаралды 4,2 МЛН
Silver Cymbal
Рет қаралды 2 МЛН
Whiskey Throttle William
Рет қаралды 9 М.
Jumper man Tech
Рет қаралды 57 М.
DragonBuilds
Рет қаралды 313 М.
EpicShortsRussia
Рет қаралды 1 МЛН