It looked so much more classy and better in matte than glossy.

The flute took me out 💀 great vid, thanks!

Great vid regardless, but "Enjoy the soothing effect of the spray" gave me a much-needed laugh today.

I have a 5 piece patio project to refinish, you make the process, from start to finish, look so easy. Thank you.

I actually like the matte black look of the primer 😂😂

I’ve been wanting to get a label printer for my small business for the longest time and finally pulled the trigger. I’m glad I did ! This machine is great kzfaq.infoUgkxw55tQTywUAAOsbrlwxONZULry77sFF1Q and the blue/green color matches the rest of the accents in my office. My favorite part is how small the footprint is. It’s less than 1/4 the size of my regular printer.Set up was fairly easy. Seller will email you a link with video instructions Which I found to be more helpful than the written instructions. I use a Mac and had no issues. They even included an adaptor for USB to USB-c which is great because I’m always losing mine! I had a few issues getting the labels to print properly and wasted quite a few sheets. You need to play around with the settings to get everything adjusted just right. If you have the wrong settings, it’ll crop off the edges or feed through blank labels. These aren’t issues with the machine though, just user error.

I totally enjoyed the smooth relaxing spray motion. 😂 Subscribed!

Thank you so much for the video, finally getting to do the same to some old chairs I’ve had in the patio for a while now.

Thank you. You made sound simple.

Good job

Just subscribed 👍🏽. Love what I’ve seen so far

Just come across this looking to restore my furniture you made it look nice and easy thank you!

Nice video. Gonna try it on the patio furniture we have!

Really liked the way you did your before and after shot towards the end. Had the chair in the exact same spot and had the "transform" effect.

Love this video! Thank you!!!!

Love the commentary and music. I feel so zen now! haha

The music!! 😂😂😂 great video, thanks!

This very informative and funny.

I'm sold

Please more videos. This was educational and entertaining.

I like the look with just the primer. What primer did you use?

Thank you boss, I just picked up some patio furniture off of Face Book Market place. The Colorado weather here gave it a beating, but I cant pass on a good deal

As a humble suggestion, I would use a circular wire brush on a hand drill or a variable speed Mototool (I happen to have a great METABO!!!), in that way you can wirebrush much faster and in a less tiresome way. Nevertheless, I've found that wirebrushing with power can produce a too-smooth metal surface, that could lack enough anchoring profile... Thus I go the sander way after wirebrushing, with coarse cloth backed abrasive sheet on my small 1/4 sheet palm sander, but you can also use a angle grinder with sanding attachment disc, or a Random Orbit Sander, or even a hand drill with a flap sandpaper drum, but try to scratch the surface just enough to create the roughness that will give a proper anchor profile, avoiding any polished areas where the primer or paint won't adhere firmly. Best wishes.

What was that sprayer you put on the can called and where did you get it?

Hi there, how many spray paint can did you use per chair?

Hi. I have black iron chairs with some rust. There isn’t any chipped paint. Aside from the sander and brush. How could I remove the rust? Once removed do I need to paint them or can I just clean them with soap and water? Thank you.

Lol, the best part of this video is your wife. She’s hilarious 😂

Whats the name of the shiny gloss black paint you mentioned using after primer at 4:00 ??

Does it have to be an orbital sander? I have a traditional type sander.

How many chairs do you think you could comfortably do with one can of paint. I don't want to go overboard at the hardware store. My furniture isn't rusty, just faded. I was planning on just scuffing it up with 150 grit sand paper. Do you think that will be enough or should I go a bit rougher?

is it a good idea to use a clear sealant after you paint?

Should the orignal coat be mostly removed or just scratched up enough for the new coat to stick?

Please tell me how many cans of paint do I need to get per chair ?? Thanks!

I used rust reformer ( after sanding off rust) and a month later the rust returned

I dunno. I’m gonna spot scrape and prime and just go with the spray paint. It’s a re-coat and a full priming is just not needed.

Would you use a clear coat to the paint after?

Where do you get the sprayer attachment to the spray paint?

hmmm sitting in a red hot black chair on the deck in summer time, that sounds logical. they were painted white for a reason

Why always have to be lemonade at the end? That’s getting old. But good job though

😂

wax on wax off

after i get them ready to paint i turn them upside down and paint bottoms first then flip over and paint top side and let dry, that way you don't mess up finished coat, powered wire brush is lots faster too good vid thanx!