How to Reglaze a Fiberglass Bathtub | Full Fiberglass Bathtub Reglazing

How to Reglaze a Fiberglass Bathtub | Full Fiberglass Bathtub Reglazing | DP Tubs

Рет қаралды 112,670

4 жыл бұрын

I get many Bathtub Reglazing calls for Real Estate Agents selling homes. They look to Bathtub Reglazing to spruce up the bathrooms for walk throughs when they are selling a home. So I Reglazed two Fiberglass Bathtub Shower Units to help sell this home. They went from a slightly yellow discolored to a nice shiny bright white. Bathtub Reglazing Helps.
#BathtubReglazing #DPTubs #SellHomes
Products Used in Videos on this Channel:
Material Used:
Bondo Fiberglass Resin: amzn.to/3rneluX
Bondo Fiberglass Mat: amzn.to/3cLCiDp
Bondo Glass Short Strand: amzn.to/3xlYuh0
Ryobi Corded Drill: amzn.to/3xkf3K6
HDX Mixing Cup 32oz: amzn.to/3p0JD7L
2" Paint Brush 24pk: amzn.to/3nLdZMd
120 To 3000 Assorted Grit Sandpaper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing, Dry or Wet Sanding, 9 x 3.6 Inch, 36-Sheet: amzn.to/312NYzi
Bondo Spreader Pack: amzn.to/3HNIEAJ
Bondo All-Purpose Putty: amzn.to/3CPE29p
Zinsser 1-2-3 Primer: amzn.to/3oXAmO2
Krylon Alternative: Rustoleum Tub and Tile White: amzn.to/3FFTcQi
Caulking DAP Stretch: amzn.to/30YsZhe
Napco Extra Strong Acid Etch: www.napcoltd.com/case-extra-s...
Jasco Paint and Epoxy Remover: amzn.to/3xniGik
Loctite Foam Gap Filler: amzn.to/3xkgTuu
Capspray Titan Compressor 75 / 95:
Titan 0524041 or 524041 Capspray Maxum II HVLP Spray Gun with Free Check Valve Kit 0297051: amzn.to/3CUJo38
3M Half Mask Reusable: amzn.to/3DSmomO
3M N95 Respirator Filter 10pk: amzn.to/3cNv9CI
3M Cartridge Replacement Pack: amzn.to/2ZpjhUq
Fume Exhauster 8" Duct Tubing: amzn.to/3cKe64v
Portable Ventilation Exhaust Fan here: amzn.to/3k5Gz5W

Пікірлер: 434

@gratefulmc7216 4 жыл бұрын

Creative and resourceful way to divert the drip. They look great...another job well done!

@SaraPooBC 4 жыл бұрын

Yet again amazing at the difference before and after loving it - having my current bath ripped out and replaced with a walk in shower lol

@jatikalmanigault 3 жыл бұрын

Can I ask, what did the replacement cost? (Not trying to get in your business, but thinking about doing this to a room I want to AirBnB.)

@kendraclark4404 4 жыл бұрын

Great job as always tfs can't wait to see more and I like watching your wife reaction videos as well can't wait until she does more👍👍

@DPTubs 4 жыл бұрын

Thanks Kendra we are excited about bringing you all different content on all three channels!

@rachellehmann5044 4 жыл бұрын

I’m glad you started your KZfaq channel I’ve always wondered how tub reglazing was done

@DPTubs 4 жыл бұрын

Thank you so much!

@candykidscourt 4 жыл бұрын

I love these kinds of videos... Keepem coming danny

@DPTubs 4 жыл бұрын

I appreciate that Cameron!

@loribaker8870 4 жыл бұрын

Looks beautiful!!

@SteveandShelb 4 жыл бұрын

Okay, this is so satisfying!! Great job Danny! 🙌🏼

@DPTubs 4 жыл бұрын

Thanks guys!

@loribaker8870 4 жыл бұрын

Love these kinds of videos

@erincronenwett829 3 жыл бұрын

Was going to do myself, but watching you do a professional job I will hire a professional!

@loribaker8870 4 жыл бұрын

Great job Danny

@DPTubs 4 жыл бұрын

Thanks for watching Lori!

@jeweltone1546 3 жыл бұрын

Thanks for this video! Now I know it must be sanded beforehand. They (management and maintenance)re-glazed my tub and the tub was still wet with water. Therefore I believe they didn't sand it either. The bubbles came up soon. Thank you so much. Now I know what to tell them which should be their job anyway.

@rainbowrealpaintinginc9441 2 жыл бұрын

with this primer used, it will peel off quickly, sherwin williams paint is for private people, not professional

@3Repete 3 жыл бұрын

Hi, great video. Lots of good information! I am about to do this on two tub surrounds in my house here in NH. I have 2 sprayers, One is an airless Graco 360DSP which has a 4" fan tip or a 12" fan tip and two speeds. I normally use it with the big tip on high speed for wall paint. My other sprayer is an HVLP Devilbiss FLG4 with a bunch of tips. It has 1.4, 1.5, 1.8, and 2.2 tips. I normally spray cabinets, doors, and trim with the 1.8 but that requires thinning most material. I use a Ford #4 cup which measures the viscosity-thickness of the paint so I can get it to the thickness that sprays well. I will shoot the 1,2,3 primer with the airless. Graco says it sprays anything without thinning, which is great because I 1,2,3, trhinned with some water on my cabinets and it took forever to harden up. In checking I saw some other folks asked about polishing and repairing Krylon. I see that once it is cured can it be fine sanded, compounded and polished? Does it normally cure to a shine?

@DPTubs 3 жыл бұрын

Yes definitely cures to shine

@cw21661 4 жыл бұрын

Great job danny😊

@DPTubs 4 жыл бұрын

Thanks Cindy!

@stacybulux43 4 жыл бұрын

Looks good 😉

@ashleybautista2650 4 жыл бұрын

I enjoy watching this 🔥🔥🔥

@DPTubs 4 жыл бұрын

Thanks so much!

@janetgreenler7602 3 жыл бұрын

Awesome!

@aidang2557 3 жыл бұрын

Seem.easy work to make.alot.money but waiting time requires.

@billymasoner3735 4 жыл бұрын

Looks amazing! One suggestion I’d make for future videos is better lighting. It was really difficult to see the detail in the tubs clearly in the before shots.

@DPTubs 4 жыл бұрын

Yeah hard sometimes to set up lighting at a Customers house! I have to work with what is there!

@Jen4evr 4 жыл бұрын

Looks amazing! Looks like it takes a lot of time to do it also

@DPTubs 4 жыл бұрын

Those two took me 6 hours!

@Jen4evr 4 жыл бұрын

Dang

@charles4200827 4 жыл бұрын

Looked great

@DPTubs 4 жыл бұрын

Thanks Charles! Appreciate you watching!

@charles4200827 4 жыл бұрын

@@DPTubs you're welcome

@jinhomui7713 2 жыл бұрын

Do you think magnum paint sprayer would work as well?

@tundrawhisperer4821 3 жыл бұрын

Can you refinish in a different color then the original color? I have bone, would like to go white. Thx

@justingiese6544 2 жыл бұрын

What air cap size do you use on the titan? I have a fuji q5 platinum i use for auto body. I use .8, 1.0, and 1.3 air caps for primer base and clear. Would i need a 1.5 or 1.8 air cap to refinish a shower surround?

@MrCar-ok2nd 2 жыл бұрын

How much would a job like this cost? I was looking to replace my tub, but after seeing this video and seeing the results are quite good. I think this would be the best route for me that am on slim budget.

@nancyletteer3170 4 жыл бұрын

Wow! Excellent transformation! All that masking so time consuming I hate when I paint and have to mask off but has to be done 🤔😩

@DPTubs 4 жыл бұрын

The masking and prep does take the most time. The spraying takes the least amount of time.

@randelee3442 3 жыл бұрын

❓❓ I repaired a tub shower and painted with krylon tub & tile but the finish turned out chalky compared the the original super shiny finish.. is there a way to shine up the repaired area to look and feel less chalky?

@sarahbella458 3 жыл бұрын

What is that just a regular paint primer you can get a your hardware store? Can this be done with a roller? What are the downfalls for using a roller besides time?

@vvrriissvvllaadd 2 жыл бұрын

Wonder what you use to clean your gun , after using this product, I use rustolium bath and tub it’s only 25$ on Amazon but the product is amazing

@TimRountree 4 жыл бұрын

Danny, they looked amazing! What a change. Thanks for the videos, but how do you manage to wear white doing all this work and stay looking so clean? Good work and keep up the videos.

@DPTubs 4 жыл бұрын

If you look closely my white pants are almost brown lol...I also wear a spray suit when spraying.

@philwatson4886 11 ай бұрын

I am using the same sprayer as you what pressure and flow setting are you using for primer and paint

@viktorzhuravel5577 3 жыл бұрын

Danny, If you have a video of how to do the same thing with a STEEL bathtub, give me a link please. Thank you and I wish you success.

@MyTBird57 2 жыл бұрын

What if you have an almond color tub with lines in it like a marble sort of and the clear coat is coming up on the bottom of the tub

@kevo9267 3 жыл бұрын

Good job bro! I work for miracle method in san diego. I use the graco gun with a 3M cup. Looks like you take forever to prep and spray I can do a cast iron tub, in 1 hour and a half, clean up and everything. Fast is production. You know that!

@DPTubs 3 жыл бұрын

Thanks man! Cast iron tub with no damage or repairs can be done in about two hours for sure. However, as you can see in this video this is a fiberglass bathtub shower unit that was coated before that required sanding and primer. To me fast is production but too fast is quality control and unnecessary mistakes. I like to take my time. I work for myself and don’t rush. I am not worried about squeezing in as many jobs in a day.

@mlinecomposites1 3 жыл бұрын

@@DPTubs how long did the job take you in this video?

@shellyray2416 4 жыл бұрын

Dang thats a lot of steps. Plus all the supplies you use. I would think you have to buy all that in bulk or you wouldn't make any money. I never knew you could scrub to hard cleaning your tub. Good to know...

@DPTubs 4 жыл бұрын

Yes on fiberglass and pressed steel you can scrub to hard and they also fill out when abrasive cleaners like comet or Ajax are used! It’s like scrubbing a fine grit sand paper on the surface. Yes material is purchased in bulk but most materials purchased last through multiple jobs. This job was $800 and materials were about $100. Especially since some were purchased from prior jobs.

@Gayboi4u 4 жыл бұрын

How do u figure estimate? How many tubs a month? I’m looking into this for an add on service. Up state NY

@billysyms5761 3 жыл бұрын

Actually 7% of your gross is materials, reglazing is profitable.

@lashermytube 3 жыл бұрын

Hey thanks for this vid. Im getting ready to spray my clawfoot. I was wondering though if you have to thin the krylon stuff with • Xylene or acetone to have it go through the sprayer smoothly?

@DPTubs 3 жыл бұрын

I have been using Krylon for over two years and I have never send the product once and I also live in Las Vegas with extreme heat. Generally you can send the product with anything that it’s recommended to clean up with

@damiancolmenero3606 Жыл бұрын

I want to learn how to fix the paint an wats the best paint to use

@aprilgood7130 2 жыл бұрын

How long does this last before seeing wear or need to do again?

@dentonbranson3596 3 жыл бұрын

What is the red stuff you use to fill chips?

@ccsmith705 3 жыл бұрын

Thanks for the informative video. I’m just a DIY’er and am going to refinish my fiberglass tub/shower enclosure (actually looks exactly the same as the one in this video) I have a Titan 115 HVLP with a Maxum II gun. What size projector do you use and what air flow and paint setting do you use?

@DPTubs 3 жыл бұрын

Tip #3 I also show my gun settings on my paint spraying video. Check it out and let me know what you think!

@DonMDirty_Mind_Detroit 2 жыл бұрын

How Big Is The Compressor That You Use Great Looking Job

@jeremyb1551 3 жыл бұрын

Nice work sir! I travel painting doing residential work, been looking to do my tub and possibly offer to customers if my first go around turns out as planned. I do have a question, my tub in particular is a bit slickery and would like to add some 'traction' to the floor of the tub. Any applications available to add a grit of some kind so I don't end up like a turtle on my back?

@DPTubs 3 жыл бұрын

Yes you can add Shark Grip to the finish.

@rudyc1312 2 жыл бұрын

hi..do you tape the perimeter before you wash the tub or after?

@aaronhitchcock9164 Жыл бұрын

What kind of primer do you use for fiberglass?

@josephwhitfield5182 4 жыл бұрын

Hi, thanks for the video... Do you have an reccomendations on a good epoxy?

@DPTubs 4 жыл бұрын

Yes there a few: Midwest Chemicals Napco Ltd Resurface Solutions Krylon Tub and Tile

@thinkoutsidethebox7020 2 жыл бұрын

Could you use an electric paint sprayer too

@familiacandelariotorres 2 жыл бұрын

What kind of nozzle do you use for that because I have a fuji pro but it is by gravity and my nozzle is 1.4 or I need to buy another gun that is like yours

@DPTubs 2 жыл бұрын

Nozzle 3

@briandmillo1726 Жыл бұрын

What kind of sprayer brand / type do you recommend

@Goodnightandgoodluck-c7m 3 жыл бұрын

Great video just wondering how long does the glaze last and since its a bath / shower area how about mould and mildew ? Thank you

@DPTubs 3 жыл бұрын

Main factor is care and maintenance. I would say with proper care 5 years. Regular cleaning and wiping down is a must

@shannonseifert4975 2 жыл бұрын

The bathtub in my apartment had a small crack in the bottom so it was resurfaced the other day. I waited 48 hours and after the first shower the crack is already back. I think it’s because it’s so uneven underneath. Any suggestions?

@als3449 4 жыл бұрын

What kind of primer should be used I also spray tubs but for the most part I just sand or acid etch .is there something in the TDS that would give me an indication of what primer will work on tubs also does the primer need to be sanded or just spray over it .

@PHILLIPSFamBam 4 жыл бұрын

Al S ALWAYS sand the primer with a high grit of 600-800 to kick down any dust bumps and then vaccum it out then tack cloth. If you don’t sand and tack cloth you will have roughness in your final coat. What supplier do you use for top coat?

@juanitamarvin4261 2 жыл бұрын

How long does this last on a shower til it has to be redone? I want to do this in my upstairs bathroom. I have a Fuji 5 will a 1.8 mm fitting be ok? The shower is in good shape but I want to change to white and spruce it up.

@Genohall1 3 жыл бұрын

Great video! How long does the process of refinishing a tub take you from start to finish?

@DPTubs Жыл бұрын

Depends on the surface being reglazed

@ZussieMakesit 3 жыл бұрын

Awesome work! I think I’m doing this in the next week or so, so this video is really helpful and detailed! Thanks!! Just a question, what primer do you use? I saw kilz brand but is it a specific type? I was researching and found a kilz that is bonding for fiberglass and other tough surfaces, but what you used looked like regular primer? Please advise 🙏🏽 Thanks again for your videos!

@DPTubs 3 жыл бұрын

ZussieMakesit Zinser 1-2-3 Primer

@rainbowrealpaintinginc9441 2 жыл бұрын

with this primer used, it will peel off quickly, sherwin williams paint is for private people, not professional

@devkin63 11 ай бұрын

What type of material is this and what brand and where can I buy it? Thank you for the Great video.

@ramblinjamman 3 жыл бұрын

Danny, thanks for taking the time to share this with all of us here on the web. I had one question though, is it normal to use the "Bulls eye" general paint primer before applying an epoxy coating? I'm not a chemist, but for some reason was under the impression an "epoxy specific" primer had to be used. Obviously that's not the case though since you've had great success with it.

@DPTubs 3 жыл бұрын

Hi Jonah..Thanks for the comment. That’s a great question. The best way to answer that is for me to make it clear on how or why I use the primer. I use the primer simply as a sealer not for adhesion. Even though the surfaces are thoroughly cleaned washed there are times were certain things cannot be seen to the naked eye. The primer sealer when sprayed makes the surface very uniform in color as well. So when sprayed and dried I am able to see if there was anything during cleaning that was potentially missed or silicone reaction things of that sort. When sprayed on tile it also helps seal the grout. There is no negative reaction with the bull’s-eye primer and the reglazing materials that I use. Now if you want a primer that is made for adhesion purposes then I would recommend using a primer that is from the same manufacture as a Reglazing Material. However a bonding agent or adhesion promoter can do that job as well. For example if I apply a clear liquid bonding agent let that dry then spray the primer sealer then spray the finish topcoat I will be fine. Also noted: the more thinner one uses with their top coat the more negative reaction one will have with primers, bonding agents, etc. I rarely thin out my material unless absolutely necessary. Thinners or reducers are more of the problem than anything, IMO

@julioctorres6450 2 жыл бұрын

Hello, Danny and thanks for the question Jonah .. what type of prime do you use or do you use paint with primer? Also do you have pictures or video a year after results? Thanks for the videos and the time for all the input you put into this page and answering questions.

@rainbowrealpaintinginc9441 2 жыл бұрын

with this primer used, it will peel off quickly, sherwin williams paint is for private people, not professional

@alyssahaygood1266 4 жыл бұрын

In my kids’ bathroom they have a fiberglass tub/shower combo like these and my 4 year old dropped a bath toy and it chipped the tub... is there a way to fix that?

@DPTubs 4 жыл бұрын

Yes, is the chip all the way through? You can check out the video I have on Fiberglass crack repairs and you can do that same thing with the chip. Let me know if you have any other questions. kzfaq.info/get/bejne/qaxjpJef3K-phX0.html

@MonicaGBaldo 3 жыл бұрын

Wow! This is so cool. I just had my son’s bathroom completely redone, it costed me 16,000, but definitely all this painting would be worse it to save some money if it was the case for us, love your work, if I was a man I think I would work with construction!

@mejicles1130 3 жыл бұрын

Hola amigo, que primer usastes?

@DillonJamesss 11 ай бұрын

I like the drip trick . Is your gun negative air pressure

@strikerfgmexico4436 3 жыл бұрын

HOLA AMIGO COMO ESTAS? me gusta mucho tu canaL y aun mas las instrucciones,ya mire casi todos tus videos y aprendo mucho.... ya compre mi turbina graco 7.0 y tambien la spary gun graco HVLP,trato de conseguir galones de (PINTURA BLANCA,REDUCER Y CATALYST) en galones,TIENES algun provedor que me puedas recomendar? saludos Y MUCHAS GRACIAS!!

@GlenStoner Жыл бұрын

Nice work..! I have a tub and shower that needs this. Its 20 years old and in good shape but the white has slowly yellowed over the years. there is no damage. cracks or wear through marks. What is the estimated cost for this to hire a professional like yourself?

@cinthyajimenez3987 4 жыл бұрын

Hi. I’m looking into this for my moms restrooms I don’t have a cap spray maximum would it work with a more economic sprayer? And what is the name of the kit for reglaze? Thanks

@DPTubs 4 жыл бұрын

DIY you can use Krylon Tub and Tile or your can use Homax from Home Depot. However the preparation is the most important. You want spray equipment for acrylic urethanes.

@faustinozavala4096 7 ай бұрын

Do you need to acid etch, fiberglass

@Southernrefinish88 4 жыл бұрын

I figured you would use hawk product's to spray professionaly.

@DPTubs 4 жыл бұрын

I like Krylon and I have used a few. Midwest Chemicals has the best overall product for the money. I like the 1:1 ratio of Midwest as well. I like Krylon for Vegas because it’s “wet” enough for the heat and doesn’t need to be thinned as much. Very thick. A bit more expensive because it only comes in quarts but holds up very well.

@godackgudalach1 3 жыл бұрын

This is great work you do and nice spray gun. I want to do my shower but need to do a roller or brush. What would you recommend as far as a product for that? How much do you charge for this?

@DPTubs 3 жыл бұрын

Roller brush combo never gives a good result. I would recommend spraying. You can even use a DIY spray gun at Home Depot called a Wagner Flexio. I normally Charge $350-$375 to Reglaze a bathtub shower combo. I use Krylon Tub and Tile:

@jasonr634 4 жыл бұрын

Hi, love the video! I just had my tub reglazed recently with this same spraying method, but after the tub dried I noticed lots of really tiny bubbles throughout the tub. Is this normal or a potential sign that the job was done poorly? Thanks for your insights!

@DPTubs 4 жыл бұрын

Small bubbles indicate that there is a possible adhesion issue or fish eyes! Did you use a bath mat? Should be smooth at the bottom! It’s possible that the reglazed did not remove contaminants on the surface completely and there is a reaction.

@uria702 4 жыл бұрын

It means the tub wasn’t sanded/prepped properly before spraying and the paint didn’t “stick”.

@rebeccakocak9906 2 жыл бұрын

My shower is missing a few tiles here and there. Do I replace them and then have the shower reglazed?

@DPTubs 2 жыл бұрын

Yes! Have the tile replaced and regrouted

@theog_72fortyclub68 4 ай бұрын

Can you roll the tub paint vs spraying? Cutdown on overspray and mist carry.

@DPTubs 4 ай бұрын

I would never roll!

@markerard270 2 жыл бұрын

Never had luck with hvlp systems,, paint need to as water almost.

@user-hq7kp7wq2y 10 ай бұрын

Had it done, have a bubble and some specks sprayed over. Also should the tub be smooth? Mind is not. I live in a retirement community & feel things are not done correctly .

@randygregory7826 3 жыл бұрын

Can't seem to find the Krylon Tub and Tile for spraying . Any idea where to buy it. ? Thanks and great video...

@DPTubs 3 жыл бұрын

Amazon or Sherwin Williams

@larsbambi1575 3 жыл бұрын

I am an automotive refinisher.. just a few questions. . Could I use a gravity-fed HVLP spray gun with a 1.4 tip? If not what size tip are you using? I appreciate the video

@DPTubs 3 жыл бұрын

Tip size 3 and you could definitely use a gravity fed! Gravity feds always reduce waste

@dragonslair888 3 жыл бұрын

What primer do you use? I'm intending to take on this project and want a long lasting finish. Thanks

@DPTubs 3 жыл бұрын

I currently use Resurface Solutions. I made a video on my channel showing how I mix the material and what it is. If you want something over the counter then I would look into POLANE from Sherwin Williams

@KRigby 2 жыл бұрын

Honestly there is no difference between the bath tub and a corvette or most boats so when you are told that it wont stick look up how to paint a boat:) HoC red metallic candy shower yummy

@cavitycreep Жыл бұрын

Corvette are plastic

@anthonyohare2268 Жыл бұрын

So are you just sanding to prep or are you taking the previous finish off?

@mrrich5466 3 жыл бұрын

Nice work... Did you start with 220 grit with orbital the p400 by hand (dry), primer, then finish coat. How long for 100% cure time after final coating * Does the sticky coat mess with the uncovered sheetrock?

@DPTubs 3 жыл бұрын

Yes 220 orbital Yes 400 by hand on primer 48 hours for cure to use with water 5 days for 100% complete cure I generally mask 24” around and use an exhaust fan / fine extractor seen in one of my other videos. If it’s dark painted walls then I cover more. Krylon is not super sticky like other coatings

@tm8505 4 жыл бұрын

Great video. Exactly what I was looking for. Question? What size tip did you use and how much did you thin the primer and the topcoat? Thanks.

@DPTubs 4 жыл бұрын

I use #3 tip....I do not thin the top coat at all unless it is very hot. If I do I only use 10% thinner to paint ratio. I like my material thick. In my opinion the more thinner you use the more the material is “lessened”.

@tjscott1204 Жыл бұрын

@@DPTubsI’m looking for the best materials to coat tub’s with. Can you direct me to exact product. The primer and epoxy

@coupofmentality3417 2 жыл бұрын

Thank you for sharing. What was your cleanup process for the epoxy, acetone? I'm hoping to not trash my sprayer, any tips?

@DPTubs 2 жыл бұрын

What sprayer do you have?

@coupofmentality3417 2 жыл бұрын

@@DPTubs Its a graco nova

@marioperez7019 Жыл бұрын

Yo bro have you ever used the 4600 from Sherwin williams Pro store ?

@statesborobrews 4 жыл бұрын

Great video, what model compressor do you use

@PHILLIPSFamBam 4 жыл бұрын

Robert Smith Titan Capspray 75 or 110 HVLP

@barbarahoward5789 4 жыл бұрын

How long does the new glaze typically last? Are there any chemicals that work best to clean it or any to definitely avoid?

@DPTubs 4 жыл бұрын

Can last 10 days or 10 years. All depends on care. Yes..non abrasive cleaners with a soft sponge. ZEP, Lysol Tub and Tile, Soft Scrub with Lemon.

@jonhsmith1902 Жыл бұрын

I've reglazed a fiberglass tub with enclosure. I cleaned, sanded with 150 grit, tact cloth, primered, and then applied rust oleum 2 part. I've noticed I've developed a rough surface. Could this be caused by not letting part A and B set up before applying, or was my prep not thorough? Thank you for your time and professional opinion.

@DPTubs Жыл бұрын

Could be a few things..might need to be thinned out. Could be spraying too far from surface. Possibility the surface was not cleaned thoroughly and wiped with a tack cloth before spraying

@mariobeazley4107 4 жыл бұрын

Great video bro! Do I need a hvlp sprayer or can I use a regular sprayer?

@DPTubs 4 жыл бұрын

I only know of using an HVLP..not sure how well the material will be applied with anything else

@lynnlamptey5699 2 жыл бұрын

Who does this stuff I need mine refinished but have no idea who to call

@kurtlangeberg1329 3 жыл бұрын

Nice! Those came out awesome. What PSI are you using to spray with? I know you said something a little high. Are you talking like 40 psi's or even higher?

@anthonyohare2268 Жыл бұрын

HVLP sprayers and compressors are usually low pressure, usually less than 5 psi

@janicecorbin9984 4 жыл бұрын

I just have a patch of glaze that has worn off. Can I seal just the patch?

@DPTubs 4 жыл бұрын

Yes! Sand it down smooth, spray a primer on it, then finish coat

@evanmartinez529 4 жыл бұрын

How would you remove the over spray that is left after the paint is dry?

@DPTubs 4 жыл бұрын

Depending on the product sprayed you should be able to use acetone or lacquer thinner. Make sure you check the surface the overspray is on so they don’t damage the surface when applied

@tanjadoss7055 4 жыл бұрын

If I am painting for the first time, what grit sandpaper should I use?

@DPTubs 4 жыл бұрын

What type of surface? Metal tub or fiberglass? Metal or Cast Iron tub I recommend using 80 grit after acid etching the surface. Fiberglass or acrylic I recommend 220 grit to scuff it up enough for adhesion but not too course to show scratch lines.

@mariotommadich4685 3 жыл бұрын

How long does the reglazing last before it starts looking cracked and peeling? Would you use the products of this video in your own home?

@DPTubs 3 жыл бұрын

With proper care and maintenance 5 years or longer. Yes I would use in my own home.

@gm-lb9oe 3 жыл бұрын

What kind of finish do you use in your gun? Is it easily acquired? Or do you have to have a supplier? I'm up in Canada so dont know where I would be able to get it. Any ideas where I could get it? Thx

@DPTubs 3 жыл бұрын

I use Krylon Tub and Tile. I purchase it at Sherwin Williams

@Osmaribarrak 4 жыл бұрын

How much do you charge to do this on my tub, I have one that looks the same? I am located in San Fernando valley ca.

@DPTubs 4 жыл бұрын

I am in Vegas and I charge $300 a regular tub

@johnlacrue5043 2 жыл бұрын

How long did this one take??

@3Repete 3 жыл бұрын

Hey all. I just went to Titan's website and looked up the Maxum II projector sets. The #3 set that is shown is these videos has a .051" tip, which is 1.3 mm size. Auto guns like I have will use a 1.3 or 1.4 for basecoat and smaller for clear. They use a 1.8 for heavier material like primer. I have used a 1.8 for latex which I have to thin down. I'm surprised the Zinsser 1,2,3 will even flow at high volume low pressure (HVLP), it's thick. I have used 1,2,3 thinned this spring, but it took forever to dry in my humid cold basement. Once dry though it sealed and was a nice base for my paint. Hope I am not being a jerk by adding to your comment feed! Thanks

@DPTubs 3 жыл бұрын

I use the 20 oz spray can Zinsser 1-2-3 with the wide nozzle. Sprays amazing. Available at Home Depot. If you ever have a problem with primer drying make sure to use your fune extractor to suck the moisture out of the room. Helps with dry time tremendously. I use a #3 tip for my top coat.

@3Repete 3 жыл бұрын

@@DPTubs I sprayed it with my gun. 2 coats. No problem. Waited a bit, knocked it down with 400 sandpaper. Mixed up the Krylon Tub & Tile and put on 3 coats. I used a 1.5 tip because the Krylon was thinner than the latex I have been shooting on my cabinet fronts and trim. They have been thinned and shot with a 1.8. Also I wanted to remark that I was concerned about the bits and pieces that I found in the Part B can of the Krylon. It was really a lot of bits. So much so, that it would clog my filters. In hindsight I wish I had brought out my cooking strainer, that would have grabbed the bits and allowed me to filter the 2 part epoxy a bit quicker. The epoxy covered well, it's very shiny. I got a bit of pebble grain in the finish. So if it does not level I will probably polish it up to get it smother.

@DPTubs 3 жыл бұрын

Yes ALWAYS strain your Krylon. Mix very well and then strain. The catalyst / hardener gets chunky I use cone strainers from Home Depot

@lindastewart4565 4 жыл бұрын

My tub is an insert and has a textured bottom for safety. How do you go about handling that since you can't really sand since it's not smooth? Or does that matter? Due to mobility problems we'll be switching to a walk in shower. Any suggestions?

@DPTubs 4 жыл бұрын

What do you mean handling? Cleaning the bottom or Reglazing the bottom?

@lindastewart4565 4 жыл бұрын

@@DPTubs Do you sand the tub bottom when it's textured?

@mrcarguy15 4 жыл бұрын

What chemical do you use to strip old caked on soap scum and hard water deposits? Thanks

@DPTubs 4 жыл бұрын

Use Zep or CLR...then let it soil and use a scrubbing pad. Then repeat!

@tobiassinclair4646 2 жыл бұрын

The krylon product does not require a primer. Why do you use a primer?

@jameltaylor6116 3 жыл бұрын

Again, fantastic videos!!! Couple of questions I still have after watching. 1) I’ve noticed you using a different kind of primer (paint based?) rather than the Bulldog adhesion promoter that you recommended in other comments. Do you have a preferred primer for fiberglass tubs? 2) How much Krylon tub & tile do you end us using to finish a full bathtub the size in this video?

@DPTubs 3 жыл бұрын

So the bulldog is always used before the primer. The primer I use is strictly for sealing grout or neutralizing variation in color. It also helps me see any imperfections on repairs due to the uniformity of its color. Note: I do not use the primer for adhesion purposes but more for sealing purposes. Primers for fiberglass tub adhesion I would recommend Midwest Chemicals while using their white finish as well. I really like their finish but it’s less convenient due to shipping costs and delivery times. If it was local I would be using it in a heart beat. I use about 36-42 ounces of mixed Krylon at the 1:1 ratio per unit.

@jameltaylor6116 3 жыл бұрын

@@DPTubs thank you so much for the info! Extremely helpful! Unfortunately, Midwest Chemicals doesn’t sell to the general public, so I think I will end up using the Krylon tile and tub. Is there a primer you suggest that works best with Krylon?

@DPTubs 3 жыл бұрын

@@jameltaylor6116 yes you can use Zinser 1-2-3 or Zinser BIN shelac based primer. Just make sure they are totally dry before and DeAnda me before coating. Also Krylon is on Amazon for $30 kit as opposed to $75 a kit from Sherwin Williams You also need to mix well and strain into spray gun cup

@alexander781414 3 жыл бұрын

@@DPTubs wow you really are doing a good job thank you for sharing your skills to us .. I’m a 15 years experience painting house and any kind for paint for house so I’m looking to start doing this painting here in Utah .. what do you used to clean your cup sprayer after you finish painting the epoxy paint or primer ?

@khonelaoIndy 4 жыл бұрын

looking good.I was wondering what kind of primer and where you get them at?

@DPTubs 4 жыл бұрын

DIY primer you can use Zinser Primers at Home Depot

@khonelaoIndy 4 жыл бұрын

@@DPTubs thank you

@DPTubs 4 жыл бұрын

No problem. Try Zinser 1-2-3

@robertgarcia5891 3 жыл бұрын

I like your work where are u located

@garthmorris6740 3 жыл бұрын

I used one mix of the krylon tub and tile and did a fiberglass tub, after I'm seeing alot of what looks like orange peel...should I add another kit to it and wet sand before? I just expected a more smooth looking surface..

@DPTubs 3 жыл бұрын

What gun did you use?

@garthmorris6740 3 жыл бұрын

Batavia hvlp