G'day Josh. I had the same set up for years myself. Loaded heaps of 22-250 rounds and now the grandson's have got all my gear and they're loading up to 308 with it but different dies of course. It never let me down once. I couldn't agree more with you . Be bloody careful and you'll make better bullets. On ya mate.

I find it can be very therapeutic to just do one step and have a break, and then do the next step. Lee has a very good handbook with good instructions and explanations as well as the charge tables.

Thanks for the look mate.

Always relaxing to reload. 1034 reloads = lots of ferrals down.

Good vid, with sensible reloading information. I would say to young people thinking of reloading, is to try and pickup used equipment. It’s usually available at swap meets etc. You can keep cost down, and avoid spending a lot to get started. The equipment you used is everything needed. I would add a set of vernier calibers to measure case lengths.

Thanks for sharing ... reloading is something I really want to get into and this video is very helpful as 223 is what I will be reloading once I do.. much appreciated ...

Thank you take care good hunting .

Thank you, and yes, we did get alot out of thus video

My brother-in-law's from Australia. You still live there. He lives in ewantin, QLD He used to come out here every winter which would be your guy's summer. I've always wanted to visit Australia but it looks like now with the Chinese disease I won't be coming because I refuse to get the shot Unlike your guys's country we're not mandated to get the shot. But I do have a hell of a gun collection that's one thing our country does less have is our guns we love our guns

Really interesting video, thanks for putting it up.

That was a long day! I have that same Lee press and dies. I think the Lee gear is pretty good. Thanks for the video.

Good Vid Mate. Walked easily through the entire process. There’s nothing wrong with LEE gear; I use it all the time without issue. Very important to keep interruptions and distractions away, and you have to keep mobile phones away from those digital scales; they play havoc with them. Most of the 55 grain projectiles (and there are heaps of them) will shoot fine in the 223’s, and the loads don’t vary that much at all. Now you can make some noise…

Awsome video very informative.

Great video, thank you for the insight into hunting and reloading. Keep up the good work.

I enjoy your content hasn't been out in a long time due to work

Another great vid and a big effort in front of the press!

I've got the same setup mate but I prime on the downward go around when resizing. That cut down the time significantly. That and the quick detach thread. Cheers from the USA.

That powder measure leaks. It's not pleasant. The Lee press is great, though, I love it.

Thanks mate. It’s something id like to get into reloading my 308’s.

Like the way you did this one mate, I have the same set up and enjoy the time to reload.

This was a great one 👍

Cool video I remember sitting and loading for hours I ended up getting a rcbs charge master made life so much easier and exact same powder every time. Used to use 52 grain Speer hollow points in 222 and 223 they were awesome

Good video Josh 👍🏾

Top fun that and leather work vests bullet belts ect.

Thank you always good to have a refresher. I always see or learn something new or different in the many presentations available on the net. You are soft spoken so I have to turn up the volume a bit. Happens when you get old and deaf. Do you ever cast bullets?

This would be a good thing to do when your inside when it’s raining or just have nothing to do recycling old bullet shells back into bullets plus your saving money

Enough for a weekends shooting😁😁😁

Hi there mate great vid you and your family have a great weekend .

Gidday mate, I watch all your shows & love them. I recently saved up & bought the Howa 223 mini action fat barrel stainless. When watching this reloading clip I thought I heard you say that you can put a 222 round through it? Did I hear right? What about projectile wobble, any? I'm an old guy & have introduced my 3 sons to shooting as well. My main weapon before this is a 22 magnum Mossberg long barrel. Anyway, the other mention I wanted to say was when having trouble with traps I always put a generous pinch of flour on the plate and a eyedrop of aniseed essence. Because that smell can't be found anywhere it brings them in from afar. If you try that then it will pay to have some perimeter traps with no scent . I first started trapping in the 60's, and swap between aniseed and vanilla, but just a small drop. It also makes the flour go sticky, cheer from Paul.

brilliant info vid bro , not seen this stuff before

thanks mate....great vid

Great video I’ve never seen this done before 👍🤙

My advise is read all you can dont do it with all your mates around get the tools you need for the job you can shake the loaded round and hear the powder in it the biggy is if you think you havnt got it right put it aside and pull it apart later .

Nothing like knocking out 1000 rounds on a single stage press. I'd load 1000 9mm one Saturday, then shoot them all off the next Saturday. Don't think I ever loaded more than 500 .223 over a weekend. Full length sizing gets tiresome after a while. 😊

Hi, that was brilliant to watch, thank you. I've worked in Engineering Design all my life have designed small Jigs & Fixtures and Press-tools similar to those that you were using. Also Quality Control on the Workshop Floor (yawn) The overall weight of re-loaded Shells must be minutely close to one another and you mentioned about concentrating on what you are doing, due to the repetition involved. As you are going thru a batch, do you make random checks every so often, to make sure that re-loads are consistent in weight?

Should have measured the overall length to make sure before you started cranking them out

i use same brass, osa, accedently used hornady brass and it changed accuracy quite a bit. 55g sierra game kings, same as supa roo's i'm told, and 25.5gn of 2206H, cci primers. absolute beautiful accuracy of 1/4" groups. need to reload myself, only 30 rounds left. i only neck size with my good old australian press, forget the name. with your changing of components, do you load test every time? i haven't the time, so stick with exact stuff.

Back around 1915 my father used to reload for his Winchester 32 40. He would stand the empty shells in a tray of water and heat with a blow torch then knock the tray and the shells were annealed.

lhf, like your videos how do you know how far to seat the bullets into the case? would like to give reloading a try.

Sure is a lot faster than my Lee hand loader😃

Cute bird in the background

Why does your primer land where it is supposed to unlike mine on the ground to the right?

Awesome video bro you should look into a Dylan 750 I have one and I can load 1000 rounds in an hour but they do cost a bit just under 3000 for everything you need for it but really worth

Rubber band on Lee primer I use 2 rubber bands...one on each side. ❤️Collet Die. Used to use 2206h, now, 2208, for 17rem to 270. Maybe some 2219 in future for 32gn 204. Ricky says, shoot the cats, shoot the cats... Setting powder thrower can get finnicky. Frankford Arsenal intellidropper is where I ended up.. Have an unpowered primed case with bullet in it is a nightmare....I guess..😉 Big reloading marathon...14 hours... That's going to be alot of foxes and cats etc. How long might that last you? Would be interesting to see some groups. Thanks.

Maybe consider making it so that people can make one off donations via Patreon if possible? I would consider that over signing up for a recurring donation.

I had a wild female King parrot that used to feed & it would fly into my shed & sit on my bench while I was working. One day it was fossicking around and just as i said "NO DON"T DRINK THAT! it dipped its beak into a bowl of blue kero I had on the bench & took a drink. It spat it out & shook its head & flew off. Didn't see it it for a few days & I thought it was dead but it came back, Last saw it in 2019 during the bushfires but haven't seen it since. My pet cocky I had when I was a kid got into my wallet I left lying around & shredded all my money into bite sized bits.

People who watch TV 60 hours a week tell you they have no time to reload and it's a waste of time

I reload one at a time 6k a year

So how much would that save you over buying factory ammo ?

Msg u..But anyway I use 2206h with 25.5g on super roo projectiles coal 2.190..nxt need to work out load etc for vmax 55gr 😎talk later tomorrow hopefully

How much is a set up like the one you use with the dies and everything?

11:07 Have you thought of taking the end cap off the tube and feeding that straight into the bin, that way you never have to empty the tube?

Just wondering what's the cost approximately per reload round 🤔

Give me some 😅

By the time you get all the gear and ammo to reload, is it even more cost effective?

hey, im new to reloading but do you need to crimp 223 rounds ?

Well interesting how often do you reload all your bullets ? .