How To Remove a Olive, Five Different Ways To Remove a Old Olive Off a Pipe.

Рет қаралды 150,021

Күн бұрын

I will show you 4 ways I recommend to remove olives from pipes, plus 1 other method which I do not recommend so much.
I remove 15mm, 22mm and 28mm Copper and Brass olives using different tools and techniques.
So you can carry out you job with less stress.
I really appreciate your support and a cup of coffee goes along way. Helping me to make more videos to help you
Any donation in my “TOOL BOX FUND” is amazing and really appreciated
www.paypal.com/donate/?cmd=_s...
Please click "THUMBS UP" and "SUBSCRIBE". Click on the "BELL" if you would like a notification next time I upload a new help Video
"SHARE" me with your friends
Find MORE HELP on my Web Site, where all my videos are categorised to make them easy to find.
With links to products and parts I recommend
www.markballard-ltd.com
You can leave a message in the comments, your feed back is always appreciated. Thank You
“As an Amazon Associate I earn from qualifying purchases”.
Chapters
0:00 How to remove an olive, Introduction.
1:09 How to remove an olive using plyers.
5:39 How to remove an olive use junior hack saw and screw driver.
8:27 How to remove an olive with an olive puller.
10:16 How to remove an olive with olive cutter.
11:11 How to remove an olive with a adjustable spanner and a hammer.
Links to my help videos.
VIDEO: Review "Monument 15mm Olive Removing Tool".
• Review, "Monument Oliv...
Shopping LINK: Monument 15mm & 22mm Olive Removing Tool
www.markballard-ltd.com/recomm...
VIDEO: Review "Monument 15mm Olive Cutting Tool".
• Review "Monument Olive...
Shopping LINK: Monument 15mm Olive Cutting Tool.
www.markballard-ltd.com/recomm...
Shopping LINK: Monument 22mm Olive Cutting Tool.
www.markballard-ltd.com/recomm...
VIDEO: How to use Compression Fittings.
Coming Soon.
VIDEO: How to replace a leaking radiator valve. With out draining the system: Part 1.
• Replace Radiator Valve...
VIDEO: How to Fit Radiator Valves & How NOT to Fit a Radiator Valve. Fixing Leaking Radiator Valves.
• How to Fit Radiator Va...
VIDEO: How to Replace a Radiator with Out Draining the System.
• How to Replace a Radia...
VIDEO: How and Why you should add "INHIBITOR" to your heating system. Including "System Cleaner" and other "Chemicals"..
• How and Why You Should...
VIDEO: How to Fix a Radiator NOT Getting Hot! Thermostatic Valve Stuck.
• How to Fix Cold Radiat...
VIDEO: How to flush Out a Radiator. The Best Way, Getting the Best Results
• How to flush Out a Rad...
VIDEO: How to Balance your Heating System to make it more efficient. Which will REDUCE YOUR GAS BILL.
• How to Balance Your He...
VIDEO: How to Install the Hive Thermostat Mini Smart Active Heating
• How to Install the Hiv...
VIDEO: How to Operate your Traditional Heating System most efficient Setting
• How to use Your Centra...
VIDEO: How to Get a Radiator working and Hot Again, Everything I would do.
• Everything You Can Do ...
VIDEO: Radiator NOT GETTING HOT Because of Blockage in the Pipework.
• Radiator NOT GETTING H...
VIDEO: How to remove a radiator for decorating.
• How to Remove Radiator...
VIDEO: How to Operate Honeywell T3R Programmer
• How to USE, Program & ...
VIDEO: How to Install and add Inhibitor, Magna Clean Professional 2
• MagnaClean Professiona...
Video: Easiest way to Add Inhibitor into a Vaillant Filter or Spirotech filter or Any Filter with a 3/4 Drain Point
• How to Add Inhibitor I...
VIDEO: How to Fix Vaillant ecoTEC Plus F.22 / 0.0bar Safety switch off low water pressure.
• How to Fix Vaillant ec...
VIDEO: How to Fix F75 on a Vaillant & Glow-Worm Boiler, Plus Why Your Boiler is Tripping Out with F75
• How to Fix F75 on a V...
VIDEO: How to clean Vaillant Filter Version 2. Vaillant Protection Kit.
• How to Clean Vaillant ...
VIDEO: How to clean Vaillant Filter Version 1. Vaillant Protection Kit.
• How to Clean Vaillant ...
VIDEO: How to clean the Magna Clean Professional 1
• How to Clean the Adey ...
VIDEO: How to Operate Honeywell T3R Programmer
• How to USE, Program & ...
VIDEO: Is your boiler continuously losing pressure. What's the problem.
• Boiler Keeps Losing Pr...
VIDEO: 10 Money Saving Heating Tips. Simple Things You Can Do Which Will Improve Efficacy Save Gas / Money.
• How to Reduce Your Gas...
Recommended Tools.
VIDEO: Einhell Classic TC VC1930S Wet & Dry Vacuum Review, 30L 1500watt.
• Einhell Classic TC VC1...
Shopping (Amazon): Water Vacuum. I use this vacuum daily. Highly Recommended. www.markballard-ltd.com/recomm...
The Gas Safe Register.
www.gassaferegister.co.uk

Пікірлер: 88

@titantitan3030 11 ай бұрын

It is the first time that I have seen something very useful and well explained about plumbing, the kind that no one has ever said anything about and something so simple, thank you Mark Ballard, for giving us that great experience.

@leighjones5551 Жыл бұрын

You are a live saver changing a motorised zone valve 22mm and you pipe grip and wiggle worked a treat . 👍

@gordonizatt1775 Жыл бұрын

Brilliant video, very well explained and clear demonstrations, thank you

@nomad9296 Жыл бұрын

Some good methods, I used a dremel with a small cutting wheel when I replaced 8mm TCV on my radiators 👍

@johndelper1404 Жыл бұрын

Had a cracked nut behind the olive ring very close to the wall, slid a flat screwdriver into the crack and broke it in half, then I followed your instructions... worked like a champ, Thank You.

@charlesmiller5606 5 ай бұрын

Wonderful, clear, useful examples. Cheers, Mark!

@simonmiddleton4977 2 жыл бұрын

Thanks Mark, really helpful info 👍😃

@michaelbooz 9 ай бұрын

Very Helpful! I was gonna try the last method you showed. After watching I see why that would have been a bad idea and could have damaged the joint behind it.

@smokeyrobinson4918 Жыл бұрын

Thanks Mark, great info!

@ilovecds9606 Жыл бұрын

Thanks for advice the olive removal tool was great because I didn't have enough access to move the nut away from the olive.

@philipwalker2522 11 ай бұрын

Thank you Mark, what a beautifully explanatory video. Watching this video was like being shown something by your dad for the first time, but with the relaxed confidence of a true professional. It was an absolute pleasure to watch and learn about something I didn't know anything about, but in a way that didn't make assumptions about prior knowledge.

@pf824 Жыл бұрын

Very useful, thanks

@davelinkson1 Жыл бұрын

Very helpful, thanks Having a problem getting a brass olive off even with a remover, as I don't do it often I may have made the wrong approach, looks like I may have to cut it off.. Damn!

@hrhbucket4268 7 ай бұрын

Thanks, really useful. I like the first method with the pliers. I'll try that in future. Historically, I have generally used the hacksaw method.

@cymplecy Жыл бұрын

The simple 1st method worked for me - thank you :)

@jimmoline329 Жыл бұрын

Thank you! I appreciate your videos

@deniskundrat7161 Ай бұрын

A very good explanation. Thank you

@akdenyer Жыл бұрын

I have done dozens and usually use a file I find the control better than a Junior hack saw. But the other tools look great.

@dld4045 6 ай бұрын

Mark, Enjoyed the video. The only suggestion I might have is to clean the bitter end of the pipe or tubing and add a drop or two of penetrating oil prior to beginning!

@EscobarMX3229 Жыл бұрын

Great video sir!

@dande19 8 ай бұрын

Excellent video! Subscribed

@mehere3013 Жыл бұрын

Good video , I'm about to fix water pipes on my boiler that blew of it during ice weather and it flooded boiler casing

@garvielloken3929 Жыл бұрын

Awesome!Subbed!

@lololine Жыл бұрын

This is a great video!!!

@traceyhoad5429 Жыл бұрын

Fantastic.

@pauldecham6036 Жыл бұрын

Thank you!

@ww4407 Жыл бұрын

Hi. Do you have the link to your video on how to seal the olive to a damaged pipe that you mention in this video please.

@MindBoggling01 Жыл бұрын

I was hoping to find this video as well.

@Palessan69 Жыл бұрын

great stuff

@matt49125 Жыл бұрын

I need to change some radiators with 8mm inlets...decided to invest in an 8mm olive cutter. Not cheap but zero stress

@frankrui9169 10 ай бұрын

Thank you

@MrBlue-ws5in 5 ай бұрын

Brass or copper? What's the best to use for compression fitting? Any difference and if so why?

@johne7345 Ай бұрын

How about using a mototool (Dremel) to cut into the olive on both sides?

@NAB001 2 ай бұрын

Thank you!!!

@truthwillout7909 Жыл бұрын

Great video Mark, cheers.

@aljones4719 10 ай бұрын

Works a treat to remove AN olive.

@aschmidt570 Ай бұрын

THANK YOU

@mikepanchaud1 10 ай бұрын

I've used a mini Dremel style drill with a 1 inch circular saw blade. Obviously taking great care to not damage the pipe. Useful if pipe is very close to the wall and hard to get at.

@dld4045 6 ай бұрын

Moisture and electricity do not mix well. Otherwise, a last resort if needed.

@MrToneroyal 5 ай бұрын

Lol in America we call the olive a compression ring. Good video. Thanks

@ben.tanner 4 ай бұрын

Aka ferrule

@kib2675 7 ай бұрын

when the olive is compressed, I use a rawl bolt inside to expand it and the pipe. When done and the bolt is out, then they are easy on the plier.

@prevaleren 5 ай бұрын

Dear Mark, Thank you for the clear instructions. I’ll be just sawing of my pipe though, because I think the pipe is too damaged. Save myself the trouble. I do appreciate your video!! Thanks.

@brahim21261 6 ай бұрын

You have the link please for buying. Thank you

@Esuper1 Жыл бұрын

We call it compression sleeve here in the States. Love calling it an olive tho.

@chriswithall2518 4 ай бұрын

Experiance counts for a lot. Thank you from just a diyer.

@billybop17 Ай бұрын

Is it ok just to leave the old nut and olive on with a new fitting ?

@donbailey6600 2 ай бұрын

Tool is worth every penny. Just buy it and be done.

@oneclick1066 11 ай бұрын

Awesome! 👌Subbed!

@kukladbob1 4 ай бұрын

Very helpful! Much better than the local council 😢😂

@GarretKrampe 10 ай бұрын

wood chisel and give it a pop axially and then the other way making a cross. then pliers and heat if necessary

@olheghtt Жыл бұрын

I can't find the video where you say you can put an olive over a squeezed copper pipe, replacing leaky valves for a sick neighbor in about 4 hours hennas really hoping to have that knowledge just in case.

@MrToneroyal 5 ай бұрын

Where is the link for the "olive" removal tool?

@Jorvik-The-Poor Жыл бұрын

What about plastic 10mm pipes?

@FirstNameLastName-okayyoutube 4 ай бұрын

So how does one remove 30 feet of pipe and get it into the vice?

@FirstNameLastName-okayyoutube 4 ай бұрын

Figured out how to solder vertically by practicing on a vice, so feeling pretty Unstoppable at the moment

@timothybloomer8287 Жыл бұрын

I was just wondering if a 10mm olive is harder to remove?

@MarkBallardLTD Жыл бұрын

8 and 10mm pipe very soft. Probably squashed pipe. But same method

@larrygk1257 3 ай бұрын

With a lot of care especially because the pipe is usually in a tight hard to get to area with a hacksaw I used a Dremel tool at low speed with metal cutter. Again....slow and careful. And faster.

@vicmartin7735 Жыл бұрын

Interesting, thanks. I don't see the link referred to when replacing the olive on a damaged pipe. (at 8:20)

@duckflynn3849 Жыл бұрын

using the tool at 8:27 it straitens the pipe and removes the brass Farrule (not an olive an olive is food a farrule is a part of a compression fitting he is calling an olive) all in one shot. but then again im in America we call a buggy a cart a bonnet a hood a lolly a tractor trailer , semi, or a truck also spotted dick means you have a std not a can of food.

@psilocybemusashi Жыл бұрын

Does anyone have any luck using the old stop valve stuffed with a few washers?

@eddierae8945 Жыл бұрын

Sealing a new olive if pipe has been crushed@8.15. where is your video on compression to explain this

@123croydon 3 ай бұрын

I am not a plumber but I am pretty sure I've seen somebody using a tinsnip. Wanna try that?

@antoniogalluccio4213 Жыл бұрын

You forgot to mention the olive splitter made by dickie dyer and rottemberger

@johnnichols2710 5 ай бұрын

If you don’t have a specialty tool for this, use vise grips and work it off. Be careful not to grab it too tight and deform the pipe

@jeepien Жыл бұрын

I wish I knew what an olive was. Must be a Brit term. Okay watched the vid. Now I know. Thanx.

@satstube Жыл бұрын

Sometimes adding standard flux to your first methods helps just side off

@geeache1891 8 ай бұрын

There are many video' s on youtube on learning English. Most of them go beyond adding a 'n' to an 'a' before a word starting with vowel. Never heard that olive is an exception though.

@WalkersCastle 5 ай бұрын

Are there similar video 's about the correct use of the apostrophe and space character?

@geeache1891 5 ай бұрын

@@WalkersCastle 😄 I'd better not make such video!

@Sash_Window Жыл бұрын

There is another way.

@mehere3013 Жыл бұрын

video "how to use compression fittings , coming soon" WHEN

@MJ-qm7ke Жыл бұрын

An olive….

@grahampalmer 10 ай бұрын

Yes it's "an olive". Don't you just hate poor english.

@dumdiversaspapalbull1452 Жыл бұрын

Ferrel

@douglasedward4041 8 ай бұрын

Olive - noun. a small bitter green or black fruit that is eaten or used to produce oil, or a Mediterranean tree on which this fruit grows.

@olheghtt Жыл бұрын

The best way to remove an olive is with a toothpick..... "Shaken, not stirred"

@peterroles6130 4 ай бұрын

How to remove "AN" olive!

@MrSnookerballs 9 ай бұрын

How To Remove a Olive, do you mean AN OLIVE

@edmundlawther1037 Жыл бұрын

bullshit olive remover tool purchased one wont fit in pipe cut with pipe slice because of burrs wasted my money

@lynnshev3404 Жыл бұрын

you couldn't clean off the burrs?

@steveolive9991 10 ай бұрын

1. What you Brits call an Olive, we Yanks call a ferrule or compression ring. 2. Should be "an" olive, not "a" olive. I hope your mechanical experience is better than your grammar.