How to Remove an Engine - 2002-2005 Ford Explorer
Рет қаралды 109,364
4 жыл бұрынNew Facebook Group!
/ 4.0sohc
Whats up guys! Today I removed the engine from my Explorer to replace the rear main seal! I figured I'd make a video showing you all the steps and tricks in removing the engine. Hope you enjoy!
This video is how to remove the engine on a Ford Explorer (gotta put this so people find it lol).
If you like my videos and want to see more please consider supporting the channel!
www.paypal.com/donate?busines...
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user and Platinum Garage makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. Platinum Garage and all affiliates related shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by Platinum Garage and therefore, Platinum Garage does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge Platinum Garage or anyone affiliated with Platinum Garage, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.
@49smoyer Жыл бұрын
Ive been a Diesel mechanic and instructor for close to 19 years. I often will watch a KZfaq video before a project just to see what I’m getting into. This young guy impressed me with his tool knowledge and attention to detail. Keep up the good work bud!
@ZPrezton 5 ай бұрын
I was impressed myself. I’m 63 and hired a young man mobile mechanic to replace the valve cover / intake gaskets on my 03 yesterday. 400.00 I definitely didn’t want to tackle this one. Funny, you mention diesel. I have a 2001 7.3 with zero diesel mechanic knowledge KZfaq has taught me. Currently adding the cnc 4 fuel lines and HPOP. New wire harness and just got the KC turbo. Fun project. Also got the LPOP with new radiator and intercooler. In my 30s my Camaro project was fun But never imagined, diesels being exciting . Lol love that torque and black smoke.
@ingodwerustt Ай бұрын
I've been planning on V8 swapping my 05 and this video will definitely help me when I get to the stage where I pull the old 4.0 out. I can't tell you how many times I've watched a "how to" video that was terrible and more unhelpful than going in blind. This was the exact opposite. Thanks for taking the time and effort to do this right.
@Coliththegreat Жыл бұрын
Yo good job man very helpful. I've been dealing with this nightmare of an engine for a long time. And out of all the videos for dealing with that engine. You did it the best. You didn't miss a thing and you made it digestible for anyone with a piece of comment since to understand. Most professionals can't do that so good job. Downside I have to deal with my ptsd from all of the resurfacing memories. Before I start with my timing chain tensioner guide replacement and inspect the rest of the components. But you saved me from a huge mistake. I almost started this exhausted thank you.
@iamdjnam Жыл бұрын
What year is the mustang?
@paulcastellanos3084 Жыл бұрын
Thanks for making this video. I had my 04 removed twice for timing chains and oil leaks. Trans rebuild too. Finally ended up getting both replaced with jaspers eng and trans
@dyegsitsw954 7 ай бұрын
Just dropped my engine in a 2006 4.0 v6 manual Ford Mustang using this guide. Some things were slightly different, but thanks for this guide. Looking forward to looking at the cassettes to troubleshoot the infamous Ford death rattle using your timing kit replacement guide. If you have merch I'd love to buy some.
@jasonportillo2717 Жыл бұрын
Great content man im be pulling mine tomorrow
@thebackwoodsmechanic5029 2 жыл бұрын
Great instructional video man. Good content. Showing support
@iamdjnam 2 жыл бұрын
Much appreciated thank you!!
@timothyraven1672 Ай бұрын
Hey buddy your vid’s are the exception… really appreciate your attention to detail and attitude… I’m in. 05 sport trac that Was a fire chiefs ride that I picked up at auction. Been a good ride. Had the death riddle for a long time and couldn’t figure what it was. Thought it might have been the tension pulley. I drove this thing around the country from Seattle to Florida to Texas,to New York, to Maine and back. I was out back here in Washington and the front cassette finally broke off and got a crazy grinding sound and suddenly overheated and busted the seems on the radiator… I milked it back to a buddies house and parked it. Thank God it didn’t bust somewhere out in the desert or in some places fare and away. I’ve got it all tore down now and ready to pull the engine. Just the bell housing bolts and motor mounts to go. I bought a full timing kit. The rear top #30 torques bolt head was destroyed buy the chain. So all that said I have a question… can you tell me what the thread is for the bolts on the cherry picker hoist that bolt into the head to lift her out? It would be appreciated. I’ve got to go rent a set up. Thanks again for your videos… Peace and health young man….
@iamdjnam Ай бұрын
M10x1.5
@user-uc3eh4do9e 2 ай бұрын
Ty brotha your series has been a life saver just wanted to thank you fr
@obxguy1 Жыл бұрын
Wow! You make it look so easy!
@F.o.s.t.e.r. 3 жыл бұрын
I had a timing chain guide break and crack one of my valve covers, the haynes manual was useless. But, between this and Makuloco I'll be able to actually get the engine out and change out all the timing components. Thank you.
@iamdjnam 3 жыл бұрын
Awesome! Glad I could help out.
@ghostmost2614 2 жыл бұрын
You an thousands of others
@cjcoolmoed 2 жыл бұрын
That whole jobs looks like it sucks! No wonder people scrap with timing belt problems. Bless you for having balls to complete!
@garyhynoski3379 2 жыл бұрын
Just started video. Love the text at the beginning spot on partner. Just from the beginning I knew this is the one I wanna put on the big screen. He he.
@juliodelrio1737 2 жыл бұрын
You Did well..I been through it... kudo's!!!
@bobbysmith3196 6 ай бұрын
Patience and Cold Beer Are THE Most Important Tools Required for this Project 🤣🤣🤣 Thanks for Sharing Your Knowledge!!! Very Impressive for a Young Man 👍 I have an 02 Ranger 4.0 SOHC that has the ford death rattle… Plus it’s running rather Ruff🤔 I’m guessing it’s jumped time but i honestly don’t know for sure 🤷♂️ Just Saved one of your videos on that and Subscribed!!! Thanks Again Young Man 👍👍👍
@jorgezav119 3 жыл бұрын
Great , now I can start the job Appreciate your help Thx
@iamdjnam 3 жыл бұрын
Awesome! Take your time, label lots. You’ll do great!
@bryantb6100 4 жыл бұрын
Glad u making this. I got a 2005 ford explorer. My rear main seal was bad but i kept driving it and it quit on me. Need to take mine out rebuild and put back in.
@iamdjnam 4 жыл бұрын
It'll be an identical process. My rear main actually pushed out a bit and wasn't seated flush. Hope the new one stays dry!
@bryantb6100 4 жыл бұрын
@@iamdjnam what all damage u believe was done to my engine being that I drove it in low oil until it quit while driving? Can it be rebuilt? Will I need a machine shop ?
@iamdjnam 4 жыл бұрын
@@bryantb6100 Get a different engine. Lack of oil scores the journals, cylinders, cam lobes are probably gone. I've had to buy separate cylinder heads just because they were worn out. If you rebuild it with bad heads you will have oil pressure problems.
@Jessica-bg8le 3 жыл бұрын
Thanks for this video! I'm in the process of replacing mine from my 2004 ford explorer.
@DexxBrooks 3 жыл бұрын
How did it go? I’m thinking about doing mine as well
@Jessica-bg8le 3 жыл бұрын
@@DexxBrooks it was a lot of work . We ran thru a couple issues. And It was a tough job with lining up the torque converter. Took a week to finish. Its in good condition now but I'm always running into issue with fords, it's a headache lol. I put it up for sale.
@iamdjnam 3 жыл бұрын
The torque converter is the worst part on any vehicle that I work on.
@Jessica-bg8le 3 жыл бұрын
@@iamdjnam not only that but after I replaced the engine, my cats were clogged and had to replace that. Which Idk why that happened. Everything was fine then it wouldn't accelerate. I'm like great, now what.
@scottlewis4633 2 жыл бұрын
GREAT INFORMATION MAN!!!
@iamdjnam 2 жыл бұрын
Thank u bro!!
@jasonalbuquerque5960 2 жыл бұрын
Great Videos, Thank you!
@94SexyStang Жыл бұрын
Easy Peezy. Very standard stuff!....Thanks....just purchased a 2008, 200k, got a rebuilt Trans still under warranty, Engine runs smooth.....probably gonna run it till it blows up, Lol.
@mikemaj8467 2 жыл бұрын
Although I am usually hesitant about making modifications like cutting a hole to access the lower radiator bolt, your idea is pretty ingenious! Very good video! Thank you for sharing and keep up the good work. I feel you as a guy who does this kind of work while juggling work and home duties. It sucks but better than paying a garage $3000 to do.
@iamdjnam 2 жыл бұрын
For sure. Unfortunately removing the radiator correctly requires evacuation of the AC. Blowing it off into atmosphere is illegal and I’d much rather make a small cut than destroy the ozone.
@SmitfraudC 2 жыл бұрын
I’m guessing it’s the same set up as the 4.6 L engine model. If you remove the front bumper there are access holes in the frame that you can stick a socket through and get to the bolts.
@Reeeeeee12345 Жыл бұрын
@@iamdjnam fck the ozone. Is this the same as doing a motor swap on a 2004 mountaneer?
@iamdjnam Жыл бұрын
Yup
@Reeeeeee12345 Жыл бұрын
@@iamdjnam Can I do it with a 100 point IQ, or do I need a smarter person? I have a mountaneer with bad timing. The shop wants 2000 for labor, and so I'm gonna attempt it. Can a regular dude do it? Is everything I need to know on thus video? Thanks for your response fam.
@jake501967 8 ай бұрын
Hey if you take your torx and grind a bit off the end it will fit just a little bit more snug on. When I say a little bit I mean not much at all… I use this trick on torx drivers that are a little bit worn on the end already
@GuillermoMolina-zk5qx 5 ай бұрын
Thes is a simple very good idea….I catch you…..
@michaeljohn8905 3 жыл бұрын
Thanks for this !
@iamdjnam 3 жыл бұрын
Sure thing!
@albrustmeyer753 10 ай бұрын
Thank you for your video 🙏
@fxrmike5145 Жыл бұрын
Great video... straight to the point
@iamdjnam Жыл бұрын
That’s the plan 💪🏻
@fxrmike5145 Жыл бұрын
@@iamdjnam thinking about getting 04 mountaineer that apparently the timing chain grenaded... not sure front or back, but I'm assuming it will be easier to just put new motor 🤷
@iamdjnam Жыл бұрын
Alwaysb
@verinb9 Жыл бұрын
I am INTRIGUED! This is AMAZING! For a first timer how long would you say it should take someone to remove their engine? 🤔
@iamdjnam Жыл бұрын
A good whole day. 6 hours.
@justonp1981 2 жыл бұрын
Thank you for the knowledge!!!
@iamdjnam 2 жыл бұрын
100% happy to share!!!
@robertgraves4963 3 жыл бұрын
Great video very helpful. I was hesitant to start grinding at the vehicle but was able to loosen the trans cooler and shift it up a bit and access that bottom radiator bolt from the front with a couple extensions and a socket wrench not a lot faster but avoided the grinder...still leaving it out when I re install though.
@iamdjnam 3 жыл бұрын
When it doubt grind it out
@randalltucker1900 2 жыл бұрын
Thanks.good to know.
@randalltucker1900 2 жыл бұрын
👍🏻
@randalltucker1900 2 жыл бұрын
Thank.
@lilpadi 4 ай бұрын
Masterful videos! I've been watching your journey and it's awesome! Would this be completely different from removing the engine for a 2006 Ford Ranger Engine Bay?
@davidnelson5517 Жыл бұрын
T b is helpful thank you!😊😊
@mrg4238 2 жыл бұрын
Love the video,
@johnmoorman3719 3 жыл бұрын
What a great video, thank you for taking the time to do this. This is the best video about this out there by far. I'm thinking my head gasket is leaking because I'm losing coolant and I've replaced rad, thermostat housing, thermostat, coolant temp sensor, heater control valve and most of the hoses. Anyways, she's not building pressure and I'm losing coolant internally. Is there a brand of head gasket you use or recommend? There's a lot out there and I plan on getting the whole set with the new tty bolts, I'll also do the timing chains while it's out and maybe the rear main too. I got a 2002 Eddie baurer with 219,250 miles. Thanks for the help!
@iamdjnam 3 жыл бұрын
I use Felpro and DNJ. For a timing kit use Melling or Ford. Both are very good. At that mileage you may want to consider a total rebuild. That engines best years are behind it.
@johnmoorman3719 3 жыл бұрын
@@iamdjnam ok awesome, thank you for the advice! I hope I can do a rebuild on my driveway since I don't have a garage lol
@iamdjnam 3 жыл бұрын
It may be cost effective to buy an engine with 100k, replace all of the timing components as maintenance, and drop it in.
@jamesmunroe4987 2 жыл бұрын
The one bolt I was hoping for info on for the engine/trans and u didnt even put it back in? Lol. Its ok i figured it out. U can access all the upper engine to trans bolts through the wheel wells (Didnt wanna do it) but being on light duty per doctors orders for one shoulder. I literally dislocated my other shoulder trying to reach back from above. Its ok people i popped it back into place and am still doing this motor swap. Your video is awesome btw as it helped me out a lot. This is by far my first motor swap but boy this aint nothing like the lima 2.3l lol
@iamdjnam 2 жыл бұрын
Yeah my scrawny spaghetti arms fit just fine from up top
@jerryjamify 3 жыл бұрын
I've got to do a rear main seal in my 03 explorer I'm just going to pull the engine to do it and replace my torque converter too while it's out. I think it would be easier to pull the engine than the transmission. Great video
@iamdjnam 3 жыл бұрын
If I did it again, I'd pull the trans. I had no idea how easy it was to pull one. Bellhousing bolts, torque converter nuts, exhaust, harness, driveshafts, crossmember. Done.
@showme20able 2 жыл бұрын
@@iamdjnam hi, first I like your videos , I have a 2008 ford explorer 4.0 with 93000 miles I'm hearing rattle I'm gonna replacing the 2 chain tensioner and hopefully that fix it. If I need your services I'm located on long island ny, are you close by?
@iamdjnam 2 жыл бұрын
@@showme20able yes located in central NJ
@showme20able 2 жыл бұрын
@@iamdjnam ok cool. I'll contact you when in need thank you and have a bless day.
@karlklassen603 3 жыл бұрын
Man this video has really helped me put allot..thanks..I had one question..do you remove the engine with tranny in Park or neutral or does it make any difference?
@iamdjnam 3 жыл бұрын
Doesn’t make a difference. I put it in park so it doesn’t roll
@charlievw8222 4 жыл бұрын
Great video, is it me or do you have a fan for your condenser and does it help for your ac, i have an 2002 explorer and was planing on doing the same.
@iamdjnam 4 жыл бұрын
No fan. I live in NJ so I spend more time freezing than sweating. I do have a aftermarket transmission cooler because the number one killer of transmissions is heat.
@calvinpryor Жыл бұрын
I just noticed you didn't have to take off the wheels/hub/bearing assembly at all. makes sense cuz all that would go to the trans not the engine... duh...was trying to talk my rebuilder into replacing the front bearings and lower control arm lol i was thinking he'd have to do it anyways but dagnabit lol
@fishnfix2432 3 жыл бұрын
Thanks! I have a 97 3.0l 4x4 and I'm trying to take out the motor without the trans, and was having trouble with the clearance issue.
@iamdjnam 3 жыл бұрын
Definitely a tight squeeze without removing the radiator. The harmonic balancer sticks out so far.
@fishnfix2432 3 жыл бұрын
@@iamdjnam Radiator is out. Harmonic balancer? Don't believe I know what that is. I'll have to do some research.
@classicstangbrn8964 Жыл бұрын
I'm back after watching the videos months ago you helped a lot but after 11 months it jumped time after one day. Can't we pin the cam and jack shaft gears, it always makes me nervous with just super tight bolts. I've don't a couple of these motors before and have the holding tool.
@josephbenassi9697 2 жыл бұрын
Was there a pilot bushing in the back of the engine for the tranny? Great video by the way thank you for the little details helps a bunch thanks again.!!
@iamdjnam 2 жыл бұрын
There was not.
@alexbenson6634 Жыл бұрын
Great videos man. I'm working on removing the engine from my 06 explorer right now. I have all the bellhousing bolts and flexplate nuts removed. Also both engine mounts removed. I can't get the engine to un mate with the bellhousing. Any suggestions??
@iamdjnam Жыл бұрын
Make sure you got all 8 bellhousing bolts.
@dant8213 3 ай бұрын
Should change your KZfaq name to the FordExploderKing 😅. For real tho man, im a tech of 20+ yrs and learned several tips from your vids so thanx
@jland823 4 жыл бұрын
Great job my 2002 explorer just blew with 114,000 looking to replace with a recondition 4.0, I WAS TOLD THE AC HAS TO BE TAKEN APART BUT YOU SET IT TO THE SIDE INTACT ? i'm in my 60's bad back hope i can do it, wish i had your help.
@iamdjnam 4 жыл бұрын
AC does not need to be taken apart. I left it charged and off to the side. If you’re in NJ id swap it in for ya! I have 2 titanium rods in my back so mine isn’t much better than yours hahaha
@jiwbink Жыл бұрын
CANT BELIEVE YOU PULLED THAT MOTOR IN A HALF HOUR! LOL!
@samearnest1367 Жыл бұрын
Thank you
@travisbaggett5614 3 жыл бұрын
I have a 2002 sohc and the coil pack is at the rear of the engine and the intake snorkel also comes out the front of the manifold unlike yours. I’m planning on putting the engine in a 4wd 2007 explorer with a similar layout to yours. Will it all match up and work out still? It’s out of a 2wd ranger.
@iamdjnam 3 жыл бұрын
The longblock is identical but you will need to use all of the accessories from the vehicle it’s going in.
@George-fh9zm Жыл бұрын
Do you have the part of the video where the transmission is disconnected?. I don't see where you mentioned taking off the torque converted nuts.
@jeremiahbush3195 3 ай бұрын
He mentioned you have to take them off through the starter hole with a 14mm socket.
@commoncents1521 3 жыл бұрын
Hey, thanks for the video. Can i ask where you learned how to work on cars?
@iamdjnam 3 жыл бұрын
On my 17th birthday I got an 03 explorer. I bought a Haynes manual and slowly started doing small repairs. Spark plugs, oil change, things like that. When the engine blew it forced me to step up and remove/rebuild with no knowledge. Read, read, read. Take your time. I’m now 22 and thankful that I know so much.
@commoncents1521 3 жыл бұрын
@@iamdjnam very cool, your a smart guy. Keep up the good work
@sebastiansoto3139 Жыл бұрын
Hey My brottha can You tell me if i can use a zipbelts to take out the engine or had to ve with specific chains, You think that can be posible?
@Johnny34PDX 3 жыл бұрын
Thank you for making this. I'm pulling the engine on my '03 to replace the timing chains. The repair manual says on 4WD models to pull the front driveaxles and remove the transfer case. WTF are they talking about? Is the 4WD different from the AWD?
@iamdjnam 3 жыл бұрын
Dude the repair manual is out of its mind. Axles have nothing to do with the engine swap. I left all mine in.
@caicabinetry7295 2 жыл бұрын
Hello PG. A question for ya'. I'm now down to the exhaust. Is it possible to cut off the exhaust right after the CCs (or before) and remove engine to save some anxiety. Kinda like you kept your A/C intact. You can always put back together after removing the manifolds a lot easier on the shop floor out of the truck and without the engine in. comment 1: I found another removal video stating the intake manifold bolds were T27...WRONG! awaiting a victim to round out. comment 2: TRICK My #7 bolt started to strip. A hard seed found it's way right on the top of the screw, blowing didn't remove. It started to strip. If you stop immediately. Go find a security T35 at the store. It has a center hole. (which went over the hard seed) I tapped this bit down and became cozy tight, then "SNAP" SUCCESS!!! When I took apart, I found the pieces of a hard seed inside the T35 bit. BOY!, I was lucky!
@iamdjnam 2 жыл бұрын
I wouldn’t cut the cats. Cut the studs or get the nuts off. Even cutting it post cat may not clear the trans bell housing.
@mikemaj8467 2 жыл бұрын
Can you tell me what I need to do as far as removing the transmission cooler lines that are on a bracket on the front right of the engine that lead to the transmission cooler? I've removed the bolt but it doesn't appear the lines can pull forward enough to slip off the stud mounted in the block. Do the transmission lines need to be removed from the transmission? Thank u for taking the time to make this video as it has been helpful.
@iamdjnam 2 жыл бұрын
It will slip off the threaded stud. Just muscle it off.
@Reeeeeee12345 Жыл бұрын
Just be confident bro.
@shawnrudasics7893 3 жыл бұрын
I getting ready to change my timing chain in my 2007 explorer. Which is way more than anything I've ever done. I do have a friend that help me some. The engine has 170000 on it do think I should just go ahead and change the rear main seal while it's out?
@iamdjnam 3 жыл бұрын
Yes but there are 2 styles. The one with the metal sleeve requires a special installation tool.
@MrLucasmcginty 3 жыл бұрын
I liked the video I also tried to save the ac system but I butchered the removal of the radiator so bad I’m not sure I’ll get it back together...anyways my hang up right now is the 4 torque converter bolts. I have used every 14mm socket I own but they all slip before I can get them tight... is it a two man job of do you use a thin walled socket?
@iamdjnam 3 жыл бұрын
No. They shouldn’t slip unless someone rounded them off.
@MrLucasmcginty 3 жыл бұрын
@@iamdjnam they are definitely not rounded but they are so close to the lip of the flywheel that every socket I try..mind you I’m holding another ratchet on the front of the motor with one hand and trying to tighten the torque converter bolts and they run into that lip and get squeezed off the nut before they get even close to set
@iamdjnam 3 жыл бұрын
Ohhhh ok I understand now. I use a husky 14mm deep. Maybe that helps. Not sure.
@chrisNshariNlizNpat 3 жыл бұрын
Great video ... So what do you figure number of hours to pull it - not considering EGR/manifolds being stuck. And engine being first time out. Losing coolant so thinking head gaskets and in truck while possible too much of a pain
@iamdjnam 3 жыл бұрын
I replace around 2 a month now; so I have it down to a science. Takes me about 3 hours solo. I’d say a full day for the first timers. Definitely pull the engine. Replace both headgaskets and put a timing kit. You’ll be good for another 200k.
@tuckybiggs35 3 жыл бұрын
great video man!!! is the process completely the same for a 4.6?
@iamdjnam 3 жыл бұрын
No there are some differences. The v8 is much bigger making it a royal pain to get out. That’s why I only work on the v6
@marioangiepeerman7487 2 жыл бұрын
I have pull out 4.6 this weekend I hope it goes well 🙏
@juanlatin3595 2 жыл бұрын
@@marioangiepeerman7487 make a video how to do it! I gotta rebuild my 4.6
@mikeezepek 3 жыл бұрын
What bolts do you use on the load leveler into the heads? I’m down to the bottom 2 bell housing bolts and the motor mounts. Then she comes out tomorrow!
@iamdjnam 3 жыл бұрын
I use a bellhousing bolt in the front, then the bolt that holds the harness in place (on the back of the head) in the rear.
@WilliamBush1967 3 жыл бұрын
use the bolts that came out of the mounting brackets for your accessories just make sure your chain/plates whatever your gonna connect to are bolted tight (no Slack) so you won't bend a bolt. some people take little metal plates with a bolt hole and a larger hole to shackle a chain too
@iamdjnam 3 жыл бұрын
@@WilliamBush1967 if you use the accessories bolts, it won’t clear agains the firewall
@LilyMonsterz 4 ай бұрын
Im taking out my 2006 Ford Ranger 4.0L SOHC out and I was wondering if I have to discharge the A/C or can I move it aside?
@iamdjnam 4 ай бұрын
Move it aside
@jeremiahbush3195 3 ай бұрын
I found it easier just to remove the mounting bolts on the sides of the radiator and remove all of it except the A/C radiator.
@kayob299 Жыл бұрын
Where are you located & do you jobs i have a 08 explorer needing an engine or rebuilt 1st ford ive ever owned & that whole timing thing got me scared on a used engine also rear seal but looking to get it taken care of im in Burton michigan
@artykslam Жыл бұрын
to replace the head gaskets, do you have to take the engine off ?
@iamdjnam Жыл бұрын
Yes
@artykslam Жыл бұрын
@@iamdjnam what if is just the gasket on the driver side
@ajgattarello410 2 жыл бұрын
Is there enough clearance to pull the engine with its accessories on it like the alternator and things. Im looking to pull mine and do the timing chain, so would it be better to take the accessories off anyway? Thanks amazing video so far.
@iamdjnam 2 жыл бұрын
Yes, you can pull it with the accessories on but it’s SUCH A PAIN! Soooo worth it to take them off.
@ajgattarello410 2 жыл бұрын
@@iamdjnam good looks man ill be going that route as it shouldn't take much time to pull the accessories, this video is a tremendous break down/walkthru.
@iamdjnam 2 жыл бұрын
@@ajgattarello410 glad I can help! Definitely check out my install video when putting back in - lot of pointers
@ajgattarello410 2 жыл бұрын
@@iamdjnamAyye bet, im trying to take in as much info as possible before pulling due to the fact its my daily lmao. But by chance would you know what bolts are used to mount the engine to the stand it self?
@iamdjnam 2 жыл бұрын
Every stand is different depending on the brand. I got grade 8 bolts, the same thread size as the bellhousing bolt. Longer ones, they’re about 5 inches. With a stack of washers.
@andytaylor759 Жыл бұрын
In your opinion.... how long would it take 2 people to do the job from pulling the old motor and getting the new one in?
@iamdjnam Жыл бұрын
2-3 days for a beginner
@mrg4238 2 жыл бұрын
How to tell if my 2005 ford Explorer XLT sports track is worth putting in a factory Remanufactured transmission, Would it be worth it? Also how would I know if my motor is in good shape?
@iamdjnam 2 жыл бұрын
If your motor is running good and doesn’t burn oil, it is cheaper to replace the timing chains. A lot of times people pay money for remanufactured engine and then the transmission breaks.
@mmetris Жыл бұрын
i have a 4WD 2004 ranger XLT with the 4.0 with the 5 speed manual transmission. am i correct to assume that the majority of pulling the motor from the truck would be quite similar to this? trans was tentatively planned to be pulled for a clutch job anyway beginning of summer. im not sure exactly what happened to my 4.0 yet ( happened yesterday haven't had the time to dig in yet with having to work) but out of the blue got a real bad misfire (code reader only showed 1 code. misfire cylinder 6) i was about 5 minutes from home on fairly flat land so i tried to baby it home thinking bad coil or wire. it worked for about 2 minutes and stalled coasted for about a minute and it wouldn't crank and had to tow it home with my silverado. i couldn't turn the motor forward by hand but i was able turn it backwards by hand. i went about a half a pulley rotation backwards and the starter gave it 2 good cranks and it stopped again i really didn't want to do that the first time and i don't dare to do it again. every search i do for things to watch for when i dig into it seems to bring up a half a million posts about replacing timing components (which is how i found your videos). half of my brain tells me if this motor can be salvaged im going to have to pull it and im just trying to figure out if its worth the effort on a 237k mile motor or if its time to part with the truck.
@iamdjnam Жыл бұрын
It’s time to part ways with that high mileage and tired out engine.
@mmetris Жыл бұрын
@@iamdjnam finally had a day off that was decent outside probably about a week after you replied. valve spring broke and dropped the valve. the head and piston are screwed, cylinder wall is surprisingly fine. anyway.. picked up a used motor today and following your advice I'm replacing the timing cassettes as well. (actually getting the gears, chains and tensioners too). after some back and forth I've decided before I put it in I'm pro-actively replacing seals and gaskets. i know the motor runs so I don't know if I dare mess with the head gaskets until it's needed. my luck I'd go to do them and be stuck with warped heads and a weak seal.
@geronimofranco7314 2 жыл бұрын
excellent videos excuse me could you tell me what book you used to rebuild your engine
@iamdjnam 2 жыл бұрын
Haynes Manual for 02-10 explorer
@geronimofranco7314 2 жыл бұрын
@@iamdjnam thank you very much and thank you for sharing your videos and wisdom
@MoneyTalksShelby 3 жыл бұрын
I can get to everything but the left most starter bolt. Also how do you access the torque converter bolts
@iamdjnam 3 жыл бұрын
Gotta take the starter out to get to the nuts
@brandonhallas82 2 жыл бұрын
Yo any way I can take the engine out with the torque converter ? As long as I line it up and out good off the input shaft I should be good right ?
@iamdjnam 2 жыл бұрын
Hell no. Leave that in. You don’t wanna F with that input seal. Plus torque converters require turning and pushing to click into position. Do yourself a favor…..undo those nuts!!!
@yeahrightmate Жыл бұрын
Your videos are great but you did not show anything about if there is easy access to the torque converter bolts which can be a real pain on some cars.
@hondaslave-kd6hi 2 жыл бұрын
I'm in the process right now meeting my engine to my transmission. Did you fully bolt up the engine and transmission torque converter etc then lower it onto the engine mounts?
@iamdjnam 2 жыл бұрын
Get the torque converter studs through the flywheel. Get the engine block dowels mated to the transmission. Put only those 2 dowel bellhousing bolts in. Then put your motor mounts on and lower the hoist. Don’t bolt everything up at once. Do that after the hoist is removed.
@iamdjnam 2 жыл бұрын
Take a look at the other video on my channel “how to install a 4.0 engine”
@hondaslave-kd6hi 2 жыл бұрын
@@iamdjnam you're the best
@charleshicks5567 6 ай бұрын
Did u had to refill the torque converter bolts with transmission fluid before you started to bolt together
@Xman1993 11 ай бұрын
Do I have to remove the motor to replace the head gaskets???
@tylerhuffman2113 3 жыл бұрын
Can you access everything to remove motor if it won’t turn all the way over? Thanks in advance!
@iamdjnam 3 жыл бұрын
Not quite. If the engine doesn’t spin you’ll have to pull it with the torque converter attached. I highly recommend you don’t do that. Bad for the input seal on the trans.
@weylinbarrett5657 3 жыл бұрын
Any advice on getting the intake manifold screws out. The 2 closest to the radiator were already stripped when I tried to get them out.
@iamdjnam 3 жыл бұрын
I only stripped one before, used a fat bit and drilled the head off.
@weylinbarrett5657 3 жыл бұрын
@@iamdjnam thanks. Any idea where I can find a new jack shaft bolt.
@iamdjnam 3 жыл бұрын
Amazon or dealership. Should have a link in my complete rebuild pt1 video
@protubeUyou 2 жыл бұрын
I have an 06 Mustang with the same 4.0 L motor. Long story short I'm picking up where my back hard mechanic left off. I'm getting close to putting the motor back in the car and have been told it would be much easier to pull the transmission, bold it to the motor. Than put both back in the car. The Mustang is an automatic. Any thoughts or recommendation would be appreciated. Thank you.
@iamdjnam 2 жыл бұрын
Dude! I just bought an 06 mustang too! That’s exactly what I’m doing. Bolting them together in the garage then dropping it in. Mines a manual.
@MetalMusic1134 7 ай бұрын
@@iamdjnam what years of mustang have the same engine? Are the engines and transmissions interchangeable with the 2002 explorer?
@calebyarbrough4621 Жыл бұрын
How similar is this to a 2001? I've got an 01 sport 5 speed that's about to go, and I need to replace the motor entirely, it lived a rough life before I bought it, only got about 3 or 4k out of it and she's about gone.
@mikemaj8467 2 жыл бұрын
Any recommendations on replacement timing component brands? I have heard oem parts for timing are the way to go but am considering Ultra-Power, Cloyes, or Melling components over oem to save a few bucks as I would be happy to get 2 more years out of my Explorer. Anyone have any thoughts?
@iamdjnam 2 жыл бұрын
I’ve used Melling and Preferred Components with no issues whatsoever. In my fathers truck and my aunts truck. They both daily them. Not a single noise from both.
@Steven-lz5nb 2 жыл бұрын
Ford fomoco parts for me. No issues ether
@iamdjnam 2 жыл бұрын
Same my green truck has ford parts, 50k strong right now.
@hondaslave-kd6hi 2 жыл бұрын
What bolts did you use to connect the engine hoist to the heads to?
@iamdjnam 2 жыл бұрын
Bellhousing bolt in the front, then that shorter bolt used to hold the harness in place on the back of the head.
@5.0Licks 5 ай бұрын
How long do you usually take to pull out an engine? It took me 8 hours for my first time😭
@iamdjnam 5 ай бұрын
Back when I started it took a day. Now its 2 hours but only because i know every bolt size and order of operations
@devanteacuna9245 Жыл бұрын
Do I need to un bolt my torque converter before I fully pull it out
@iamdjnam Жыл бұрын
Yes
@briangossert 2 жыл бұрын
How did you take the starter out!?!?!? I’m sick with mine - 05 sport trac 4.0
@iamdjnam 2 жыл бұрын
13mm one with ratcheting wrench from underneath and the other through the wheel well with a small extension
@franciscoramos2413 2 жыл бұрын
Great job. Can the engine be pulled and installed with the intake and exhaust manifolds still on the engine?
@iamdjnam 2 жыл бұрын
I always remove the intake manifold. Exhaust can absolutely stay on.
@franciscoramos2413 2 жыл бұрын
I had a hell of a time removing the last bolt that is close to the firewall, I did remove the intake, but I'm wondering if I should install the engine with the intake manifold already mounted. I don't want to deal with that bolt that is close to the firewall. Thank you for your help and time. Any thoughts on this will be greatly appreciated.
@iamdjnam 2 жыл бұрын
Keep it off dude. U gotta reach them bellhousing bolts and plug in the harness with the intake off
@franciscoramos2413 2 жыл бұрын
I have a 2004 Ford explorer XLT 4x4, I read on one of your advice post to replace the engine with one that had 100k if you are not going to rebuild it. Which years are compatible with my 2004 explorer 4x4? Does it need to have the balance shaft? Thank you
@iamdjnam 2 жыл бұрын
Any 4.0 longblock is compatible from 1997-2010. I always delete the balance shaft unless a customer requests to keep it.
@xMRxMAYHEMx 3 жыл бұрын
I've taken my engine out and have a refurbished engine to put back in. How do I get the oil out of the heads once it's out? I drained the oil from the pan before removing.
@iamdjnam 3 жыл бұрын
Tweeter 4561 You’ll need to let gravity do the work. It’ll take 2-3 days for all of the oil to find its way back to the sump. And even then you won’t get all of it out.
@xMRxMAYHEMx 3 жыл бұрын
@@iamdjnam that's what I ended up doing. Thanks!
@Talee_Gaming9602 2 жыл бұрын
05 Ford Explorer got everything mostly off taking all the front clip off to pull my engine bc my dad had an accident and the guy hit my rear right wheel and it shut off and wouldn’t start and broke a timing chain or jumped timing but going to go ahead and put a new motor and transmission in
@iamdjnam 2 жыл бұрын
Awesome!! I wish u all the best. Hope your dad is okay!
@Talee_Gaming9602 2 жыл бұрын
@@iamdjnam yeah he is thank u man I appreciate
@jorgezav119 3 жыл бұрын
Hi there Did you say, the front timing chain cassette can be replaced without removing the engine? Let me know if that is possible? Thx Great video by the way
@iamdjnam 3 жыл бұрын
Yes absolutely! You just need to remove the intake, front dress, harmonic balancer, and timing cover. I’ve actually replaced the cassette without removing the jackshaft sprocket by removing only the 10mm cassette bolt. If you decide to do that you’ll have to reuse the chain which is no problem. I can have that done in a day. Any other questions feel free to let me know.
@jackwarner751 11 ай бұрын
That was a great video. I took your advice on removing the transmission. And your guidance was expert. I just watched this video and it's giving me great advice. I am now going to swap an engine from a 2002 into a 2003 that has a blown engine. Is it necessary to remove all of the components as you did on this engine if I'm just doing an engine swap?
@iamdjnam 11 ай бұрын
It’s easier if you do. The less bolted to the engine, the more space you have to work.
@beingsneaky 3 жыл бұрын
dang was hoping iot was a 4.6l V8 removal
@iamdjnam 3 жыл бұрын
Unfortunately no. I am a 4.0 guru and refuse to touch the 4.6 mainly because it’s so much bigger in the engine bay and requires more steps.
@TheHopson 2 жыл бұрын
I need help! I have removed all bell housing bolts and torque converter bolts, it won’t budge! Help!
@iamdjnam 2 жыл бұрын
8 bellhousing bolts, 4 torque converter nuts. After that pry with a bad inbewteen the block and bellhousing.
@luiszavala978 3 жыл бұрын
There is any way to change the back cassette guide on the motor without take the motor out of the truck????? Explorer sport trac 2002 thanks 🙏🏽
@iamdjnam 3 жыл бұрын
No. Remove the engine or drop the transmission.
@luiszavala978 3 жыл бұрын
@@iamdjnam man for real? Lol ok I’ll try my best and thanks for the videos body they really help me 👍🏼
@iamdjnam 3 жыл бұрын
@@luiszavala978 yeah bro the bolt to hold the guide in is behind the trans. Such a stupid design.
@luiszavala978 3 жыл бұрын
@@iamdjnam lol it is man lol thanks do 🙏🏽
@luiszavala978 3 жыл бұрын
@@iamdjnam thank you for the video bro, even if you don’t notice, you help a lot 🌎 thank you for that🙏🏽
@thenest1458 Жыл бұрын
Great Video my Timming Chain Broke every mechanic either said they wouldn't do it or some said $5000 $6000. One said be better off buying a motor. So I bought a Engine off the internet for $1250 more than the junkyard motor $750 10 day warranty. The $1250 has 90 day warranty under 100,000 miles exact same motor to my 2003 Ford sport trac 2wd. All the Mechanics would take out and install my used motor for well cheapest was $2000 to $4000 so I'm installing the motor myself. Started yesterday and now I'm past the power steering pulling on the the A/C compressor. I'm not going to remove it like your video says. Please reply back ASAP have more Questions to ask as I continue Forward. Thanks so much for your video.
@iamdjnam Жыл бұрын
Join the Facebook group in the description. It’s the easiest and quickest way to get in touch.
@thenest1458 Жыл бұрын
@@iamdjnam kzfaq.info/get/bejne/hJ1nh6eep8-ogGg.html.
@iamdjnam Жыл бұрын
@@thenest1458 I’ll never touch a sport trac again it was one of the hardest engine swaps I ever did
@thenest1458 Жыл бұрын
@@iamdjnam Why? The bolts broke or wouldn't come loose. setting the engine back in. Pulling it out.
@chrisembry 4 жыл бұрын
Hey How do did u get away with the headers during inspection.Is NJ inspection different form NY inspection ?
@iamdjnam 4 жыл бұрын
I use the headers with stock catalytic converters. Its perfectly legal and doesn't tamper with emissions. No CEL.
@chrisembry 4 жыл бұрын
@@iamdjnam Thanks for the reply ,Btw what is the item bolted to the side behind the cooling reservoir and going to the top of the oil filter
@iamdjnam 4 жыл бұрын
@@chrisembry Thats my pre lubrication system. It pressurizes the engine with oil to prevent dry starts or timing rattle. Its never had a dry start since I rebuilt it.
@chrisembry 4 жыл бұрын
@@iamdjnam I am currently pulling my 2003 4.0 Motor And seem to have issue getting the driver side and passenger side motor mounts bolts to come unloose. Any tips beside PB blast to make these MOFO come out easy ?
@iamdjnam 4 жыл бұрын
Chris Embry Breaker bar! I stood on the god damn chassis (I’m a little dude) to get those suckers loose. You can torch it too.
@chrisellemuna8534 3 жыл бұрын
On the exhaust what did you disconnect?
@iamdjnam 3 жыл бұрын
The 2 15mm nuts on each side
@booth5578 3 жыл бұрын
How difficult would it be to swap to 4.0 out and put a 4.6 in?
@iamdjnam 3 жыл бұрын
Just buy a 4.6 explorer. The bell housing is different. Your transmission won’t fit. You’d need 4.6 engine harness and ECU
@booth5578 3 жыл бұрын
@@iamdjnam oh thanks Gotta pull my 4.0 out anyways So figured I'm might look into putting a 4.6 in it
@DexxBrooks 3 жыл бұрын
I have NEVER worked on a car before and my engine went out. I wanted to take the engine out and replace it but with all of this I definitely need somebody to give me some points PLEASE LOL
@iamdjnam 3 жыл бұрын
It definitely isn’t for the weak. You have to have patience, and take your time. Label everything. Pictures pictures pictures. One step at a time.
@CrotchetRocket 2 жыл бұрын
Can you please give me details on how to replace these motor mounts? Thank you!
@iamdjnam 2 жыл бұрын
If you go from underneath the vehicle, they mount using a stud and nut. You’ll see it on the K member. I believe it’s an 18mm. A little tricky to access with the front axle in the way but it can be done.
@CrotchetRocket 2 жыл бұрын
@@iamdjnam kzfaq.info/get/bejne/q5aXZ9GIld3do6c.html This is my explorer, I think this much moment could cause highway vibrations? Done tons of work trying to get it to settle down but no luck.
@iamdjnam 2 жыл бұрын
@@CrotchetRocket I would consider replacing the motor mounts and the rear transmission mount.
@terenceloblack6204 Жыл бұрын
Random question will a 2000 4.0 fit into a 06 chasis
@iamdjnam Жыл бұрын
Yes
@edwise4632 2 жыл бұрын
Have a head gaslket leak in a 4.0 in a 2004 ford ranger. Only has 120,000 miles on it. What causes these to blow, I know there is a alert on the drivers side about cracking around a cast fissure.. Do you know of any other problems with this motor. So disappointed with this motor. Replaced the previous motor at 80,000 with the same problem. Thanks
@iamdjnam 2 жыл бұрын
Timing chain components notorious for breaking apart and rattling. I've never encountered a head casting failure.
@edwise4632 2 жыл бұрын
@@iamdjnam which breaks guides and tensioners or chain. Or to do all three fail, thanks
@iamdjnam 2 жыл бұрын
Chains never fail. There’s a leaf style tensioner up front behind the timing cover that fails and the front and rear cassettes fail. Front usually lasts much longer. Rear I’ve seen broken as early as 60k miles.
@abelthecowboy3670 Жыл бұрын
I.like.your.atitud.you.are.very.positive.abauit.i.have.1.seating.in.the.gara.....for.long.time.and.i.hated
@iamdjnam Жыл бұрын
I’m only positive on camera bud
@keithsummers3112 2 жыл бұрын
What was the other size nut on the fan clutch? How long did it actually take u to remove the engine?
@iamdjnam 2 жыл бұрын
36mm nut. I take these engines out so much; takes me about 2.5 hours.
@keithsummers3112 2 жыл бұрын
@@iamdjnam ok well this will be my first time taking it out so. U figure a day or?
@iamdjnam 2 жыл бұрын
Yeah a solid day nonstop. Take your time, pictures, bag the bolts. Metric socket set and extensions. If you’re installing a used motor please check the rear cassette before installing it.
@keithsummers3112 2 жыл бұрын
@@iamdjnam ok yes I'm doing a swap. Non running engine putting in a running engine
@iamdjnam 2 жыл бұрын
Check the rear timing guide. $30 part. Can be replaced in 20 mins without the tools by following the other vid on my channel
@jonathanmohr6114 3 жыл бұрын
If was 2wheel drive and not 4x4. It might be easier to pull the engine an tranny in one cuz you don't have to mess with the torque converter our flywheel our bellhousing bolts
@iamdjnam 3 жыл бұрын
absolutely! thats what I did on my mustang.
@russellchevalier3606 2 жыл бұрын
So, your saying it would be a much easier job to pull the engine and tranny as one unit and reinstall it as such? Getting ready to do the timing chain job on a 2002 2WD Sport trac
@iamdjnam 2 жыл бұрын
Depends. I had to drop the engine and trans on my mustang because it won’t fit out the top. Leave the trans alone on your sport trac.
Platinum Productions
Рет қаралды 65 М.
FordTechMakuloco
Рет қаралды 245 М.
BalcevMMA_BOXING
Рет қаралды 17 МЛН
I Do Cars
Рет қаралды 456 М.
Platinum Productions
Рет қаралды 10 М.
Los Especialistas Automotrices
Рет қаралды 2,3 МЛН
Platinum Productions
Рет қаралды 208 М.
Sarah -n- Tuned
Рет қаралды 290 М.
MotoRaido
Рет қаралды 1,4 МЛН
Abdulla Motivator
Рет қаралды 2,6 МЛН