An awesome concise video. Good camera angles, no senseless chatter. Excellent.

Rediculous how many things have to come off just to take out cylinder.

Someone tried to steal mine but thanks to a good security system they couldn't get it. This video was a tremendous help for me to replace mainly the switch housing. Thanks again. Really very helpful.

KZfaq commercials are more important than actually putting a decent video for anything on KZfaq ! A complete runaround

Excellent video. So nice to see someone who came prepared to make a video. Every other video on Caravan ignition removal I've found consists mostly of bumbling and rambling.

it was very useful. thank you for your insight

I see your video is about removing the ignition tumbler. At least in old-school terminology that's what we called it. Thank you for also including the removal of the Black Box, better known as the ignition switch, in the video. But the title is indeed "How to remove an entire ignition". So you covered all the bases. Thank you!

Great Video, if i want to put in a push button that i can press to crank and start the engine in my van, do i have to connect the push button to the yellow wire from the ignition switch and the key-in ignition sense wire and the ignition switch out put wire? apparently there are three connectors on this caravans ignition switch, they are label: ignition Switch C-1, Ignition switch C-2 and ignition switch C-3, thank you for any information you can share.

Excellent guide! Thanks so much. Perfect timing, our 2001 needs a new ignition. I know it won’t be exactly the same, but should be pretty close.

Wow, you're really good at ratchet wrench. So fast it was like a blur. I subscribed!

That's how I do it. Good video

If it is not replaced properly can it mess up cluster panel and can it effect radiator

If I change the ignition in mine will that take it out security mode won't start or crank

Brilliant ✨

What if spring comes out bc I took the bottom of the housing off bi mistake

I’ve been looking endlessly for a how to on this! Thanks for posting a good clear informative video!

Great big video. Love how simple you made it. Thanks 👍

awesome thanks

I have followed most of your videos to do the repairs on my '99 Caravan. I replaced the fuel injectors and gaskets and the hydraulic lash adapters like you showed. I don't think I set them if they were supposed to be but I definitely put them where they were supposed to go. But I've got this crazy leak that is costing me a jug of coolant every three or four days. I thought it was the water pump going out and the weep hole dripping but it's a ton. When I look at the engine block underneath the throttle body area there is coolant that's running from there and even pulling up on the block in between the cylinder heads. Which is not on the same side as the water pump. I hear things like sloshing behind the dashboard when I start up the van. I know the coolant's gone when it won't blow hot air. I'm trying not to have to buy a whole another vehicle and I've done so much work to this van because of your videos that I hate to think do one more thing to it to save it. I'm trying not to just walk away cuz I worked so hard. I put more into this van that I got for free because of your videos then any sane person would. But it's mine and I take pride in it. I wish I could just post a video of the engine and have you maybe see something I don't.

All of these caravans have a similar setup to this guys caravan, however there are some differences. For instance, my 2005 doesn't have the tab on the ignition switch that was in the video. Overall great video but keep in mind there are minor differences between year models.

muy bien amigo, bien explicado, gracias k dios te de mas conocimiento. hace poco me fallo mi caravan 99 tiraba mucho humo negro, era un sensor map, y el sensor de oxigeno, se encuentra a bajo del carro en el escape.

I am having this issue but with a twist, I am not able to turn the ignition key to the on position. how would you remove the ignition if your not able to turn key? this info is very helpful

I took the cover where the actuator pin is and 2 springs came out. 1 was smaller than the other. Where does the smaller spring go?

Hey man any chance where to find the actuator pin only . Thank u great video

Will replacing the ignition fix the problem of it NOT locking? That is my problem the wheel doesn't lock.

Can this work on a jeep tj, in trying to remove literaly the part you take out

Saludos desde México, disculpe el interbloqueo como va ensamblado lo pusieron pero cuando abro switch no baja la palanca y sobró un resorte al mecánico ojala pudiera decirme como va ensamblado gracias

My 2001 dodge caravan starts fine and runs, but when I take the key out it still thinks that the key is in and you get that chime noise when I open the door. Eventually it causes the battery to go dead even though the door is closed and the chime isn't happening. At first it only did it with one set of keys we have, but now it does it with both. Anybody have any idea what's wrong???

I need the get the cutting key code ,can i get it from the ignition? Thanks

Great video but what a hassle . I’ll just pay someone to do it for me ….

Replace 2006 dodge caravan on the column, neutral safety switch

allot of details and screw sizes thanks. what was the purpose of the video. it was much more then just removing the cylinder. right? thanks video

Very good thanks I had same car I paid for $1,700.00 replace ignition switch still not working back to to shop 4 times key lock no good. Too Go to two shop And half month Too sad

J1 run at the Soul Brothers Clubhouse in Stockton arrival of bikes

What if the reason you are replacing it is due to not having a key?

Why did u need to disconnect black switch?? Wasnt blocking anything. Could have removed switch before u disconnected blaack box but this video isnt about ignition switch, its about switch an switch housing

How could I go about being able to do this ir just replace the actual lock cylinder inside it if the the key is stuck in the off position?

Priced new assembly: $100 → gonna run the video

Actually, that's the ignition switch.

J oj

Too dark

It was AT9

Thank you the video was a tremendous help !!!!!