How to remove and clean Intake Manifold

Рет қаралды 28,694

Күн бұрын

The intake manifold has a role that supplies air going mixture to the cylinders. Manifold originates from the Old English word "manifold" which means many pipes. In this video, we are going to show how to remove and clean the intake manifold from Toyota Vios 2012 model. We will start with the removal of the negative terminal of the car battery, removal of the air filter housing, removal of the throttle body, and lastly the removal of the intake manifold. Car owners especially Toyota Vios owners are encouraged to watch this video.
Materials:
1. Degreaser: bit.ly/2YuV4sC
2. Brush
3. Microfiber cloth
4. Gasket sealant
5. Sandpaper
Don't forget to comment down below, Like this video, and subscribe to our youtube channel to keep you updated.
Here are the links to our other social media platforms:
Email: sundaybuddysolutions@gmail.com
Website: www.sundaybuddysolutions.com
Become a Sunday Buddy Solutions Partner:
sundaybuddysolutions
Sunday Buddy Merchandise:
sundaybuddysol...
SB Solutions Facebook: / sundaybuddysolutions
SB Solutions Instagram: / sundaybuddysolutions
SB Solutions Shopee Account: shopee.ph/sund...
SUBSCRIBE to Sunday Buddy Solutions KZfaq channel:
/ sundaybuddysolutions
SB Solutions Playlist: bit.ly/3krF17x

Пікірлер: 54

@reccakarl 4 жыл бұрын

Thanks Sir sa Video. Laki tulong videos mo. Lalo na sa mga naka Vios Gen 2 na kagaya natin. More Power Sir and More Videos to Come. :)

@SundayBuddySolutions 4 жыл бұрын

Salmat sir...

@mohdsupianmohamed556 3 жыл бұрын

Thanks you for your info... I'm from Malaysia I like all video from you...nice...

@SundayBuddySolutions 3 жыл бұрын

Thank you so much Mohamed.

@grechellopingol 3 жыл бұрын

Salamat cabalen sa diy maintenance

@SundayBuddySolutions 3 жыл бұрын

Thank you sir and God bless!

@bhekiematsebula9375 2 жыл бұрын

Excellent job

@SundayBuddySolutions 2 жыл бұрын

Thank you sir

@karlrecca4401 4 жыл бұрын

Thanks Idol. :)

@geraldrupido 3 жыл бұрын

Thank you po sir very helpful po

@SundayBuddySolutions 2 жыл бұрын

Welcome 😊

@jchrg2336 3 жыл бұрын

I don't think you want to put that sealant out of a tube on that surface, because the intake seam pieces against the cylinder head get really hot as the engine is in operation

@SundayBuddySolutions 3 жыл бұрын

Hi J well noted but we used sealants that are designed to withstand extreme temperature driven by the engine.

@socratesalegrado745 3 жыл бұрын

have you clean the valve intake v/vs stem? this is must the carbon accumulated in the stem causes to block the air to enter the combustion chamber, on your video it seems the valve is not being clean, if ever worrying of carbon deposit drop to the piston top you can turn the engine manually until the v/vs is close

@delroyjohnson36 2 жыл бұрын

Thanks 🙏 Bossy🇯🇲👈🏾

@rsamansec 3 жыл бұрын

Dapat Boss nagreplace kayo ng bagong Throttle Body at Intake Manifold Gasket. Magkaka air at fuel leak iyan kung hindi na gaanong lapat mounts nila.

@keithong3568 3 жыл бұрын

After wash It need reset computer and do need WAit few hours for dry then install back ? (Toyota altis 2002 1.8cc)

@SundayBuddySolutions 3 жыл бұрын

Hi keith. after washing the manifold, make sure to dry it before reinstallation. The computer will reset automatically since we have removed the battery. When you start the engine, expect higher rpm but it will go back to normal after 2-5 mins drive.

@yahrmajahsty5266 3 жыл бұрын

@@SundayBuddySolutions true

@Shahzaib-un5gl 2 жыл бұрын

Modern intake manifold have sensor at the top, so you cannot use water to clean it, it can cause damage to electric system

@SundayBuddySolutions 2 жыл бұрын

Hello! yes that is why the video is only applicable to toyota vios 2012 model. We advice to double check the manifold assembly carefully.

@jeffremacalinao9704 3 жыл бұрын

Sir tanong ko lang nung naglinis ako ng intake manifold. Nagloko ung idle ko. Pag nka On AC bumababa rpm s 400. Tpos namamatay. Tpos prang may pumupugak sa tambutso pag nka park n umaandar. Nakadyot din pag nanakbo.ano kya problema? Vios gen. 2 din po. Salamat

@SundayBuddySolutions 3 жыл бұрын

Hi good evening sir. Possible leaking or hindi nailapat ng tama yung intake manifold during reinstallation. you can check also the throttle body sir bka madumi n rin. Check nyo rin sir yung mga hose kung naibalik ng mabuti. and last is baka may naiwan pang water sa manifold at hindi n dry bago ireinstall.

@jeffremacalinao9704 3 жыл бұрын

@@SundayBuddySolutions check ko ung mga hose bukas sir. N dry ko mabuti sir ginamitan ko ng compress air tapos air blower tpos bnilad ko pa.tpos blower ulit bgo ikabit. Malinis nmn throttle body ko.evry 6months naglilinis ako. Nung paghugot ko nung maliit n hose s manifold medyo mahigpit xa.inalog alog ko lng kya nhugot.cguro don ung leak.salamat sir. Update kita if ano nging problema. Stay safe and God bless

@eastnicky9640 3 жыл бұрын

@@jeffremacalinao9704 update dito boss pano bumalik sa normal rpm mo?

@jeffremacalinao9704 3 жыл бұрын

@@eastnicky9640 sir. Problema nung sakin 2 sparkplug pundi. Kakapalit ko lng ng bago mga 2months plng.kya di ko maisip na sparkplug may problema.

@BerettaM9USAF 2 жыл бұрын

what is the gasket sealer brand?

@SundayBuddySolutions 2 жыл бұрын

sorry for the late response, here in the Philippines the brand is Beta Gray sealant.

@danmaverickmanalustresmani7494 2 жыл бұрын

Need ba talaga lagyan ng gasket sir?

@SundayBuddySolutions 2 жыл бұрын

Yes sir para po di sumingaw yung hangin

@danmaverickmanalustresmani7494 2 жыл бұрын

@@SundayBuddySolutions pag sumingaw un hangin sir ano po cause?

@SundayBuddySolutions 2 жыл бұрын

@@danmaverickmanalustresmani7494 possible di naibalik or nakapwesto ng maayos yung gasket.

@reccakarl 4 жыл бұрын

Anong Brand mg gasket sealant mo Sir?

@SundayBuddySolutions 4 жыл бұрын

hi bro, " gasket maker "

@SundayBuddySolutions 4 жыл бұрын

Hanap ka n lang sa ace harware or sa mga local auto supply kahit ibang brand as long as gasket sealant sya bro.

@SundayBuddySolutions 4 жыл бұрын

Hanap ka n lang sa ace harware or sa mga local auto supply kahit ibang brand as long as gasket sealant sya bro.

@antoniotyjr8912 3 жыл бұрын

Gasoline or kerosene pwd po pang linis?

@SundayBuddySolutions 3 жыл бұрын

Hi Anton you can use gasoline instead. Looking forward to hear your DIY experience God bless.

@SundayBuddySolutions 3 жыл бұрын

Gasoline is better sir.

@maclaireborlas 3 жыл бұрын

Tanong ko lang idol, bakit nag ha high rev vios ko pagkatapos cleaning ko ng intake manifold atsaka throttle body?

@SundayBuddySolutions 3 жыл бұрын

Hi Claire! It's normal to expect higher rpm after cleaning the throttle body. The reason is that the clean throttle body allows more air movement in the engine and in response, the computer system in the car compensates by adding more fuel. As a result we observe high rpm. So after cleaning the throttle body, turn on the engine and have at least 2-5 mins ride. after that, the Rpm by that time is expected to go back to normal. if not, try to consider other factors such as improper reinstallation, damaged MAF sensor, etc.... I hope this helps. God bless Buddy!

@maclaireborlas 3 жыл бұрын

@@SundayBuddySolutions thank you sir

@TheThushan 2 жыл бұрын

Hi is this toyota yaris 2007 ? Plz reply. My manifold is damaged cant find it. Plz help. Many thanks

@SundayBuddySolutions 2 жыл бұрын

Hello. Nope. It is Toyota Vios. As far as I know Yaris and Vios has the same engine because they are both under the same manufacturer

@TheThushan 2 жыл бұрын

Sir Is it 2014 vios ? Made in Japan model ?

@SundayBuddySolutions 2 жыл бұрын

@@TheThushan 2012 model yes Japan

@helviolopez1833 2 жыл бұрын

whit what sealant pls

@SundayBuddySolutions 2 жыл бұрын

Beta grey sealant. It is a high temperature silicone sealant

@helviolopez1833 2 жыл бұрын

@@SundayBuddySolutions ok thank u

@edward8297 3 жыл бұрын

Yan yung inexpect kong isasama sa paglinis ng throttle body nung dinala ko sa 1 shop yun auto ko.. (@_@) Anyways.. May iba pa bang paraan para malinis yan nang hindi binabaklas? May port ba na pwede pasukan ng carb/throttle cleaner? Or gas treatment na lang para madamay sa linis yan? Salamat. :)

@SundayBuddySolutions 3 жыл бұрын

Best pa rin bro kung babaklasin para matanggal talaga yung mga carbon at malinis ng maayos ang manifold

@edward8297 3 жыл бұрын

Avanza auto ko. May port yun intake manifold from pcv. Oks lang ba lagyan ng filter yun? Saka yun isang port din na papuntang throttle?