Dam I thought I would be paying an arm and a leg for this issue but thank god this tutorial exists my car runs smooth once again

Hell yeah have a 2013 Camaro and getting just a clean is expensive ASF .. like tf smh Thank you for this 💪🏼

Thank you very much for this video it deserves a million views

“Sorry about the pizzas” lol

I haven’t cleaned my throttle yet. But my car broke down when it said engine power reduced. Black Smoke coming out the exhaust. Smells bad. But I wanna do this on my own. I pray it will work.

glade i watch this was about to pay $400 to have this done

I didnt think you were supposed to unplug the throttle body. with our 08 Silverado we put a new throttle body and it idled high because we unplugged it same with my 08 Mitsubishi Lancer i touched it while i cleaned it and it discalibrated and idled high as well until we went to a shop and reprogrammed them. What i would do is leave everything plugged in and not touch the plate. I cleaned my 14 camaro RS last week and it didnt mess with anything idled normal no codes etc. just becareful and dont pull on the cables hard or anything. Im gunna clean it better but like i said im not gunna unplug anything or move or touch the plate. Hope this helps guys

Thank you sir.. Awesome video

Would this cause a stabiltrak and "reduced engine power" light?

Thanks this was helpful af

In regards to the plate. SCIENCE! 😂

I have a question I got a 2014 Camaro v6 and when I turn it on or when it’s parked the rpm is slightly moving up and down and also when I try to keep it in the 1k range it goes down by itself then back up could this be the problem?

i did the battery and the fuse but still hesitate when coming to a stop, i did notice so lines when i take off the throttle body not sure it something suppose to stop there when screwing it . i doubt i need a special torque tool. mine its a L99 V8

Thank you so much Bro.

I'm working on my buddies 2012 Camaro with a lfx and he took it to the shop and they said his cylinder number 6 fuel injector was bad so I swapped that and now it's idling rough I did the throttle body reset and it helped for 2 min then it's back to puffing smoke out the exhaust and idling rough the smoke smells like gas

Hey just curious if it's necessary to clean the throttle position sensor. I plan on cleaning my throttle body and MAF, so I was just wondering if I should also clean the TPS or if it even has one.

Hey Omar, my 2011 Chevy Camaro stalled on me and started smelling like gas could what your showing me be the fix to what’s going on???

By any chance do you have a video or direct me to video who can show how to change the knock sensor on a chevy camero v6 2013.

I have most code people on the comment have the p21001 p0606 p0122 p0223 on 2010 camaro I changed batter starter and I just have a loud click car wont turn over any idea if it's related? I also get the service stabilitrak on dash

LOOKS LIKE YOU NEEDS TO GET YOUR SELF A OIL CATCH CAN. THAT'LL DEFINITELY HELP WITH THAT

Will this turn on any engine light? And is it suppose to be closed when the car is off??

wished i would ve seen this video before so i cleaned and moved the inside part many times and had it ported and left the car without it for a week or 2 till i got it back. The car jerk a bit after driving come to a stop or slowing down. If i let go of the brakes on drive it just wants to move forward faster than before. no codes on the dashboard. it runs good specially since i clean filter and remove the windshield reservoir.. any suggestion of what it might be? i saw you posted that method to take off the battery negative terminal . gonna see it fixes the problem.

good video!

No tienes este video en español ?

Thank god

I did this and now I have stability and traction control lights on and my rpm won’t go over 4K what could that mean ? Please help 🙏

Can anyone tell me where the knock sensors are?

Dude why do you stop the video to take it off and you never once showed how you even got the intake off and removed those parts …. The reason people are watching a video on how to do it is because they don’t know how to do it and removing and assembling parts and taking things apart is apart of “how to” do it so before you make another video take into account your doing a tutorial ok ? Thanks

Bro you are way over using that cleaner !

Should of gotten a overkill throttle body and spacer

Where i can find The valve IAC

Melts plate but still uses bare hands😂

The amount of absolute absurdity in these tutorials is unbearable. How are people so easily deluded by these finnicky undependable life hacks??? Of course it didn’t fix my issue. Because why would spraying off microscopic particulates inside the bore fix the actuator motor, outside the bore? I bought a replacement on Amazon for $35. I have put off the issue for another twenty years. If you actually managed to get enough particulates to actually make a difference, bless your heart, buy a new air filter too- or plug the damn hole after the filter. You’re making things so much harder for yourself.