Purchase this fender at :
www.revemoto.com/collections/...
This removal and installation works for :
2013 Honda Accord
2014 Honda Accord
2015 Honda Accord
2016 Honda Accord
2017 Honda Accord
This is the easiest way to remove the damaged fender off your 2013-2017 Honda Accord Fender
2013-2017 Honda Accord Fender Removal and Installation :
We'll walk you through how to remove the 2013-2017 Honda Accord Fender, so you can do it at home and save money!!
Tools Needed :
Plastic Panel Removal Tool (Optional)
Flathead
Phillips Screw Driver
10MM Rachet Set
00:00 - Intro
00:40 Bumper Screw Removal
01:30 Bracket Screw Removal
02:30 Pushpin Removal Fender Liner
04:10 10mm and Pushpin Under Fender
04:44 Inner Door Bolt Removal
04:50 Removal Inner Door plastic cover
05:40 10mm and Push pin Top Fender
06:46 Removing Fender
08:15 Fender Bracket Removal
08:49 Fender Install
09:24 Fender Bracket Bolted
09:44 Fender Liner Install
10:07 Lining up Hood Gap
11:08 Lining up Fender Door Gap
Removing a fender off a 2013-2017 Honda Accord seems hard, but as you can see its super simple. First get a screw driver and take off those screws on the side of the bumper. Push the bumper cover back a little bit to get into the 2 10mm bolts that is holding the fender bracket. Get a flathead or panel removal tool and take off those 5 pushpins under the fender. Open the door and push back on the plastic cover to release it from the fender. There is a 10mm bolt when you open the door on the top of the back of the fender. Take that off and then behind the fender take a 10mm wrench to take off that hard to get 10mm bolt. Under the fender there is a 10mm bolt and push pin to remove. Go to the top side and remove the (2) 10mm bolt on the top side. Finally get that push pin near the windshield. Now your are ready to take the fender off. Reverse the process, but make sure the gap on the fender and hood is correct. Along with the gap on the fender and door is aligned also. Congrats and tell all your friends! If you need this door handle for your vehicle go forget to go to www.revemoto.com/
Subscribe: kzfaq.info?su...
Follow Us on
FB: / revemoto
IG: / revemoto
Twitter: revemoto?lang=en
Tiktok : / revemoto
________________________________________________________
#Honda#Accord#diy #Fender#revemoto #paintedautobodyparts #cars #partsforcars #carparts #Carfender
DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.