How To Remove And Install Bicycle Cranks | Road Bike Crankset Removal & Replacement

Рет қаралды 360,470

3 жыл бұрын

Changing chainsets is not something cyclists have to do very often, but it's a simple enough job to learn to do at home, and it doesn't require any really expensive tools. In this video Ollie runs through removing and reinstalling cranks to your bike so you can change your chainset with ease!
Check out the GCN App:
gcn.eu/app
Subscribe: gcntech.co/subscribetogcntech
The GCN Shop: gcntech.co/wg
#Cycling #GCN #GCNTech #RoadBike
Did you find this video helpful? What maintenance videos would you like us to make in the future? Let us know in the comments 👇
If you enjoyed this video, make sure to give it a thumbs up and share it with your friends. 👍
Watch more on GCN Tech...
📹 gcntech.co/budgetcx3
Photos: © Velo Collection (TDW) / Getty Images & © Bettiniphoto / www.bettiniphoto.net/
Brought to you by the world’s biggest cycling channel, the Global Cycling Network (GCN), GCN Tech is the only channel you need for all things bike tech - past, present and future.
Simply put, we’re obsessed with tech: we seek out and showcase the best in bikes, components, tech, accessories, upgrades and more from races and events, tech shows and product launches across the globe to bring you the best in road bike technology.
We’ve also got great maintenance videos to help you get the most from your bike; pro-bike tours from all the biggest races; special features and the weekly GCN Tech Show. We also take a deeper look into the future of cycling, apps, smart tech and virtual riding.
Join us on the channel and the GCN App to submit your content, vote on the latest tech and keep abreast of exciting new trends.
GCN Japan: gcn.eu/subscribe-gcn-japan
GCN Italia: gcn.eu/GCN-Italia
Suscribirse a GCN en Español: gcn.eu/Suscribirse
Facebook - gcntech.co/gcntechfb
Instagram - gcntech.co/gcntechinsta
Twitter - gcntech.co/gcntechtweet

Пікірлер: 161

@gcntech 3 жыл бұрын

Did you find this video helpful? What maintenance videos would you like us to make in the future? Let us know in the comments 👇

@lewardkeeneoppura2684 3 жыл бұрын

will all-purpose grease do? or it has a specific grease to use? #askGCN

@dominicbritt 3 жыл бұрын

Cannondale cranks please

@PrzemyslawSliwinski 3 жыл бұрын

A DIY bike stand how-to video would be great! How to make a firm, reliable yet gentle clamp, in particular.

@mohamedzakariachorfi5541 3 жыл бұрын

How to calibrate a torque wrench?

@BlueJayGer 3 жыл бұрын

I'd like a video removing and installing shimano chainrings and also compatibility (larger/smaller rings) issues

@buddytheweasel 3 жыл бұрын

I'm just having a good ole time imagining people installing the left side crank arm parallel to the right side and riding their bike with both feet circling in unison.

@AlmostChadSmith 2 жыл бұрын

I'm cracking up right now 😂

@scoopballin 2 жыл бұрын

😂 😂 😂 😂 😂

@phillyd2018 2 жыл бұрын

I did this by accident when putting it back on..... 😂😂😂

@lljc9170 2 жыл бұрын

Look up power crank. It’s a system that literally lets you pedal like that. It’s ridiculous but hilarious to see. Super rare I would say

@dreweatsburgers 2 жыл бұрын

Bro I just did that shit because it broke while I was on my way to work and tried to fix it in a hurry. And now I can’t get it off😂

@tpsd2215 3 жыл бұрын

The hook on the parktool preload tool is actually for unhooking that retaining clip for the crank 👌

@daveyboy79 3 жыл бұрын

Beat me to it! I've just ordered that tool at the weekend having previously watched the Park Tools video on it.

@observer1689 2 жыл бұрын

Thank you, Ollie, for speaking slowly and distinctly. I was born and raised in New Jersey (USA) and I used to think we talked fast. You Tube videos have persuaded me otherwise. This one was a real treat.

@mx2000 2 жыл бұрын

If you don’t have the Shimano preload tool, you can also try with some pliers or scissors by putting them in and extending them (i.e. using the outside of the pliers to grip in the grooves). The cap should only require minimal force to turn, so it is quite doable.

@RiddlesGalore123 2 ай бұрын

Butter knife! Works great!

@jameswitte5676 3 жыл бұрын

Thanks Ollie. I’ve always assumed removing the crank was very difficult. Over the winter I’m going to try it. Thanks.

@fmstrat2104 3 жыл бұрын

Ollie, I should warn you that another well done bike maintenance video such as this one can only be a detriment to your career aspirations. It is well known in the corporate world that becoming known for mastering the details can hold you back in your climbing, your climbing of the corporate ladder that is. If you become too valuable to GCN as the "how to" guy you'll find more and more of those cycling trips around the world going to your colleagues as you stay there in the blustery UK wrenching on bikes in the studio. Take a look at Dan's ascent to the top and you'll get why you never want to get too good at what you're doing.

@Kimberly_Sparkles 3 жыл бұрын

This is really just a long paragraph to make fun of Dan.

@jaimeisreal 3 жыл бұрын

Just want to let everyone know about Shimano 105 r7000 chainrings in the event of replacement. You cannot use (without modification) the older 5800 series Shimano 105 chainrings on a Shimano 105 r7000 crank. The 5800 chainrings differ slightly from the newer r7000 rings, as there's a notch/cutout on the newer version's rings. And although they're both Shimano 105 offering the same bolt pattern and bcd measurements, 5800 series Shimano 105 chainrings *cannot* be put onto an r7000 crankset *without creating your own notch on the 5800 ring(s).* Best bet is to buy the exact same r7000 ring(s) for your particular r7000 crankset (same teeth amount is important too). And I'd *only* buy 5800 rings if I knew exactly what to do to make them fit properly on my r7000 crankset, as they do need to be modified. However, if you own an older Shimano 105 5800 series crankset and want to replace those rings, you can use either series' rings, without modification. NOTE: The above applies to Shimano Ultegra r8000 as well. Source: I own both versions of 105 and have done the modification mentioned above successfully. Always buy the correct rings though if you can.

@carl8568 2 жыл бұрын

I'm swapping out my 5800 for the R7000 series crankset, i've heard mixed reports about the old 5800 derailleur not being compatible. Do you know if this is true?

@inVINCEible64 3 жыл бұрын

Would love to watch the installation/removal of Campagnolo cranksets.

@staff0flag 3 жыл бұрын

SoCal LBS are full-up with repairs and maintenance, so vids like this are much appreciated.

@jshepard5840 3 жыл бұрын

Great video and I wouldn't change a thing you said. The only addition I would make is just a word of caution. When putting your crankset back on, you'll of course, as he says, not push the drive side all the way against the frame because your chain is there. So you'll put the chain on one of the chain rings, and then make sure you finish pushing the chain ring side all the way in. I had an issue with chain rub a few weeks ago and couldn't figure it out to save my life. Turns out that when I had taken my cranks off for a good cleaning, I hadn't finished pushing the drive side all the way in and it was causing the chain rub. So just take your time, follow everything in the video, and make sure to clean and re lube everything as he says. Have a safe ride!

@compassionsix 3 жыл бұрын

Absolutely great timing, great video! Got some grime that’s worked in there and I’ve been debating doing versus sending it to LBS! PS you’re hair looks great, don’t let the hairassment get to you!

@nwilliams3014 3 жыл бұрын

Great video - a perfect mixture of useful info and savage bike envy

@blitzgaming45 3 жыл бұрын

Always My Favorite Cycling Channel!

@gcntech 3 жыл бұрын

Glad to hear that!

@biketrybe7071 3 жыл бұрын

Are there others..?

@mirellaternavasio6774 3 жыл бұрын

Bellissima bici e linea massima, di molta qualità e sempre valida

@oheso 3 жыл бұрын

This might be a bit advanced for me. I'm still trying to sort out how to inflate my tyres ...

@markbrown8023 3 жыл бұрын

bday very useful video thanks for that great chap.

@LoveEarthHereAndNow 8 ай бұрын

So clear and useful!

@richardharris8538 3 жыл бұрын

That's very timely, Ollie. Thanks. I'm just waiting for the bike shop to get the pre-load tool in, and then I can install my replacement chainset. They said they should get it by tomorrow. On Friday the temperature got up to 25C here in Ottawa, Canada, but this morning it snowed, less than six months after our last snowfall. Arghhhh!

@panzerveps 3 жыл бұрын

I got by using a needle nose pliers, as I've misplaced the special tool...

@richardharris8538 3 жыл бұрын

@@panzerveps I already tried that, along with a knife blade. Neither worked. I didn't go at it too hard because I was afraid of stripping the contact surface on the pre-load cap.

@nevillecocking8093 10 ай бұрын

Thanks. From Neville Cocking. Rode for Btitish team 1974. Cape to Pretoria. Ropport Tour.

@metallusmelandril7380 3 жыл бұрын

Ok nice This is exactly what I have planned to do tomorrow

@IDMaximillian 3 жыл бұрын

hi guys great video i want to upgrade my FSA 50/34 175mm to a shimano 105 50/34 , in line with my 11speed 105 groupset. i believe this should be straight forward, of course with the different systems of uncoupling as shown in this video. also are they always sold as tri parts: non driveside crank arm + the driveside crankarm + the attached spindle any tips i can use please?

@carrotpatchkid 3 жыл бұрын

Thanks Ollie, just worked in two bikes!

@Jamie-ro6sx 3 ай бұрын

Thanks for ur wisdom mate cheers.

@lwittrock1 3 жыл бұрын

Great video!

@aadamdavids8499 3 жыл бұрын

Nice Bike 🤘🏻😍

@leighharwood9415 3 жыл бұрын

#askGCNtech .. Hi Ollie, another informative video but it's got me thinking, could you use different sized crank arms to address leg length discrepancy? Is it a done thing and if not why not? Many thanks

@petermatteson4619 3 жыл бұрын

The Shimano cranks are mistake proofed for assembly. The spline pattern won’t let you install them anything but 180 degrees apart. Also when did they add the safety tab? My 7800 cranks don’t have it.

@GuybrushThreepwood79 3 жыл бұрын

Not maintenance related, but I would love a full review of this bike as it is one that I am considering buying. Reviews on it are a bit thin on the ground though. Maybe I could borrow yours, Ollie? 😉

@SuperGamingeek 3 жыл бұрын

Can you do sram bb30 cranks next? I feel like that installation/removal is a bit more nuanced than GXP. Also DUB would be nice.

@rwlo 3 жыл бұрын

Could you do a video on cannondale bb30 please (I’m trying to install power2max spider)

@duybo1415 3 жыл бұрын

Hello GCN and community, I have recently destroyed my fork's thru axle thread. Did a bit of research and decided to fix it myself. I am planning to drill out the old thread, then tap and insert a new helicoil-ish one. The problem is after removing the threads, the carbon is exposed and I would need to tap on it to create a new thread for the helicoil. Do I then use red threadlocker or something like gorilla/loctite epoxy? Thank you in advance, RIDE ON!

@DavisGraham 3 жыл бұрын

What’s the best combo bottom bracket and crankset for Orbea Opal?

@mirkoravagli9187 3 жыл бұрын

Hello, Is the way to disassemble fsa k-force carbon crank the same procedure as SRAM, isn't It?

@algissmolskas8773 10 ай бұрын

Thank you for video

@jdme5678 3 жыл бұрын

NIce haircut ollie :D

@cheshirecat25 2 жыл бұрын

I bought a new 105 crankset to replace the stock RS510 that came with my bike (everything else on the bike is 105). I don't have an adjustable torque wrench (it is on my wish list), but is there any other way I can be certain I've tightened the bolts securely enough without over-tightening?

@LoveEarthHereAndNow 8 ай бұрын

Great video :)

@eddolol 3 жыл бұрын

If sidegrade a 53T do I need to mess with the front derailleur?

@LoveEarthHereAndNow 8 ай бұрын

Thanks a lot 😀

@jastetky 2 жыл бұрын

Ollie you should have explained how to preload the bearings more carefully as the preload has big affect on the longevity of the bearings. The GXP crank should have a wave washer on the drive side and the washer acts as a spring which automatically adjusts the preload. As the Shimano preload is a manual adjustment it should be checked with a quick spin by gently flicking down the crank arm which should spin around 1.5 turns or so. It is also good to check the GXP preload the same way and if the crank arm doesn't move in a silky fashion I recommend to take out the wave washer and lightly hammer out the waves in the washer to reduce the preload. I'd also recommend to check for lateral play in the crank arms by clasping the drive side crank arm against the chainstay with your left hand and at the same time pull the non-drive crank arm toward yourself with your right hand. If there is lateral play then more preload or even a spacer is required.

@mikes7806 3 жыл бұрын

Hi Guys! Can I have a question related to the orange Orca presented? Is this the factory color that can be configured through Myo or is it custom painted? Is that frame matte or glossy? I cannot figure out in these studio lights :) Thank you for your reply!

@danman2070 Жыл бұрын

Can you tell me how this stops squeeking? Do you grease the bearings? Should I Grease the entire shaft? Should I oil the bearings?

@rowenavillarmia3728 3 жыл бұрын

Nice

@smartdummy5751 2 жыл бұрын

what if you dont have a preload tool? is there a tool-box alternative?

@christianuy8842 3 жыл бұрын

Spider vs Direct mount crank, which is stiffer?

@jur4586 3 жыл бұрын

So ive undone the bolt on the non drive side crank, but the crank just wont come off, ive hit it with a wooden hammer but im afraid of breaking it, any advice?

@psisky 3 жыл бұрын

Where can I buy a pair of crank arms in the UK? Everyone seems to only sell the crank set but they're expensive.

@chrisogrady28 3 жыл бұрын

My shimano 105 crank arm doesn't have retaining bolts, just a big allen in the middle like the gxp

@timcappiello8295 3 жыл бұрын

#askGCNtech do you think buying a 105 power meter is worth it? Thanks (they cost 200£)

@SledDog100 Жыл бұрын

My crank arm just fell off!!! WTH!!! Thanks for the roadside assistance! Lol! All seems good for now. Only 10 miles to go.

@timcappiello8295 3 жыл бұрын

Those wheels 😍😍😍

@DANNYGATESTHEAGEDSINGER 11 ай бұрын

What you showed me in the video is definitely nothing like the mountain mountain bike I have I have a Malvern star but the problem is I I have a shredded left side crank arm I don't know if this is a correct words I'm supposed to put in here but I put it I tighten the pedals too much in a now I can't put my pedal on my left crank crank arm any more and I can't put petals on the left side crank arm is it easy to move a bike crank

@NerdopolisTCG 3 жыл бұрын

Ill love to have a work station like that

@andreasleucht 3 жыл бұрын

thx

@Jman-eg9zp 2 жыл бұрын

This is way easier than I thought it would be, I would rather do this than replace tires.

@lmaojohan Жыл бұрын

Does this work with any bike or just certain ones?

@buzzboykin9982 3 жыл бұрын

White Industries VBC would be great to see.

@josepedrorocha1596 Жыл бұрын

How often this should be done?

@tomlaight 3 жыл бұрын

I'm really tempted to try cranks at 90 degrees. I used to be an engine performance development engineer and I'm thinking of cross-plane crankshafts (on a big bang R1 for example). Curious about how it would go on a bicycle! One day I'll give it a go, when I can motivate myself :D

@jfischer507 Жыл бұрын

Go for it, just make sure 911 is on speed dial

@IraklyShanidze00X 3 жыл бұрын

How about FSA We K-Force?

@Eragonking53 2 жыл бұрын

So spindles are permanent with the crank?

@georgec2894 2 ай бұрын

What happens if a very hard mallet tap still doesn’t free the crank?

@ashishjxavier7207 3 жыл бұрын

Make a video on rotor crank arms

@russellghales 3 жыл бұрын

#askGCNtech What's up guys! I love the channel and I have found your videos very helpful on a number of different occasions. I have recently been looking into, and doing research on power meters as this will probably be my next upgrade. I have Ultegra Di2 8070 on my bike and I am wondering what would be the best route to go. I am looking at the Quarq DFOUR spider based power meter, as I know this can be used with Shimano chainrings. But will this be compatible with my Di2 and Hollowtech BB? Would I be better off just replacing my entire crankset/chainrings? The other option I have been looking at is the Stages Cycling crank based power meter. Which direction would you recommend going? Is one type more reliable than the other? I would really appreciate your input. Thank you!

@felixlong4463 3 жыл бұрын

#askgcntech I’m currently restoring a 1980s Raleigh road bike but am having difficulty sourcing parts, I can’t seem to find a five speed chain anywhere. Do I need to find a five speed chain or can I use something like a modern shimano chain? Thanks

@ukestjohn 3 жыл бұрын

Look for a KMC Z6- this is for 5/6/7 speed . I've used 7 speed chains also, with no problems.

@christophermee5214 Жыл бұрын

Chris Boardman 8.9c. The 2 you just did didn’t look like the FSA crank on the Boardman

@hexonatapeloop 3 жыл бұрын

So if I clean and grease everything and put it back together might it stop my pressfit bb from creaking?

@whatwelearned 3 жыл бұрын

The creaking is from the BB (and its bearings) not the cranks.

@bikingflyingandtrekking9390 3 жыл бұрын

I rode the Tour of Flanders sportive last year, and early in the ride I was following a few other riders in the mist along a nice flat bike path, nothing special, just minding my own business. Then something caught my eye. The left side crank arm, of the rider in front of me, was hanging off his shoe, and was no longer attached to the bike. That was certainly a bit of a surprise, both to me, and I expect to him.

@grahamaustin9085 3 жыл бұрын

That happened to a friend of mine on her brand new bike. I checked my crank and found that the preload bolt had disappeared and the crank had worked itself off as far as the safety pin. I had torqued the screws up myself and when I replaced the BB - and they were still tight! How odd.

@glbernini0 3 жыл бұрын

Why aren't there more BB options out there? Got to get the number of options up to 50!

@markusmencke8059 3 жыл бұрын

And if you don‘t have a rubber/nylon mallet, use a piece of wood or hard plastic and a normal hammer. Light tap is enough normally.

@dh7314 3 жыл бұрын

Can't wait for my orbea orca to arrive

@jaivora423 3 жыл бұрын

Congratulations on ordering one - If I may ask, which one did u order n what paint scheme. I am trying to figure out a paint scheme for the sram force etap version. Post pictures on GCN once your bike arrives n share your thoughts on it. Cheers !

@SnapJD Жыл бұрын

Awesome thank you!

@ChochiLuko 2 жыл бұрын

I was working on a 017 Schwinn Bike which has SR Suntour cranks and the spindle seems to be more similar to pp30 spindle. I initially loosened the left crank but was suppose to loosen the right drive side crank first. The axel itself on my spindle is actually held by two threaded barring holders. not a good idea to try to bang these types of cranksets out with a hammer. Haha Unthread it out, don't bang it out and mess up you axel!

@ladydominque3720 Жыл бұрын

Is this the only color ?

@aabsc 3 жыл бұрын

2:23 Are those tiny little ridges what's transferring the power? This can't be, it's normally something like a big square pin, I couldn't imagine those tiny ridges not being all ripped clean off the second power is applied to the pedal. Surely there is a more sturdy part to handle the torque? I managed to round off the square pins on my bike so there's no way those tiny ridge will handle any load.

@clonkex Жыл бұрын

That's called a spline. It looks like it's tapered as well, but yes, splines are extremely commonly used to transfer torque. In actual fact, I think splines are stronger than square tapers because on a square taper, the power tends to be applied only near the corners and that's what rounds them over.

@Jay-Jo4580 8 ай бұрын

Remember to torque your crank bolt to 15nm and the spindle to 20nm or 25nm so it doesn't come off

@philippineanti-baitingtask8620 3 жыл бұрын

FSA please!

@jaivora423 3 жыл бұрын

Hello Team GCN : Can you confirm if this bike’s color METALLIC ORANGE as shown on Orbea’s website ? Ask as I like this colour & on the Orbea’s site, the metallic quality cannot be appreciated as in this video. Please confirm so I can order accordingly. Thks !

@tommyphillips8547 3 жыл бұрын

For my next trick, I shall remove the crank

@rodcosta2345 3 жыл бұрын

What Orbea is that?

@alexanderstefan3309 3 жыл бұрын

Orbea Orca M30 2021

@ronniekoomba922 Жыл бұрын

I have a Walmart bike. I don't even have to screws at the start to remove the main nut bolt for the crank arm pedal...

@changseoklee5784 2 жыл бұрын

My god I can't remove the crank, it is seized.It is like 90percent out but the last bit of the driveside is not coming out. I struggled to take it out for hours and I think it stuck with the bottom bracket. Any solutions?

@Danyi11 2 жыл бұрын

try WD-40 product

@rdub-yah3880 3 жыл бұрын

hate to be pedantic Oliver but those are retaining (pinch) screws on the shimano non drive side crank arm not retaining (pinch) bolts.

@Kimberly_Sparkles 3 жыл бұрын

This is literally what I’m debating doing right now. Uncanny timing.

@Kimberly_Sparkles 3 жыл бұрын

Probably a much cheaper system.

@compassionsix 3 жыл бұрын

Me as well!

@ucdcrush 17 күн бұрын

No fancy tool needed for the plastic thing. You can use a pair of pliers and squeeze outward on them, or what I did, find a thin piece of metal to stick in there to turn it.

@BlueSquad00 3 жыл бұрын

Not everyone has a bike like that with a very simple process 😂

@johne7100 2 жыл бұрын

Tip: if you forget to lift the little latch and it stops you wiggling off the LH crank arm, tap the crank back on again before you try to lift it, or it can jam. DAHIKT

@mgapagnolo1819 3 жыл бұрын

Campagnolo is a major brand, yet you rarely even mention them. This video is a prime example.

@charlieruns7953 Жыл бұрын

I dont understand the point of pointing out the hole on the non-drive side as you removed the crank but you didn't mention it when replacing it.

@byc1013 Жыл бұрын

Does anyone actually cycle Orbeas? Sounds like a tapas

@j.k.b5014 2 жыл бұрын

Rubber Hammer is a must have, or a Hammer wrapped in some old cloth, and dont use too much grease, Cause it will add more fiction to get it in

@happydogg312 2 күн бұрын

What kind of grease?

@aarongidding8477 3 жыл бұрын

Doesn't involve any really expensive tools, like a torque wrench?

@jayay3881 3 жыл бұрын

Bicycle torque wrench 40 quid from Halfords will be OK for Shimano. You shouldn't really be doing up any bolt on your bike without one, especially if it's carbon. A wrench capable of 48Nm for the SRAM is a bit more pricey though (£60 from Toolstation).

@aarongidding8477 3 жыл бұрын

@@jayay3881 Of course there are cheaper options out there although you do have to be careful about calibration. A park tool torque will set you back quite a bit though :)

@LoveEarthHereAndNow 8 ай бұрын

#Sustainability #SustainableTransport #ActiveLifestyle #Healthy #Health #HumanHealth #CleanEnergy #ZeroEmissions #NetZero

@rkk112 3 жыл бұрын

@spawnterror Ай бұрын

Synthetic lubricants are designed to be highly effective at reducing friction and wear. This means they are also very good at penetrating and adhering to surfaces, including your skin. Once on your skin, these lubricants can be difficult to remove and may cause irritation, dryness, or even allergic reactions in some individuals. Not much about safety in this video!

@ThomasGutierrez-zy9hu 11 ай бұрын

This is my first road kzfaq.infoUgkxMesz3KOGEmwmvyKQfLfrRSUXLFzfVHZA and I have taken it out a handful of times and so far it is exceeding all of my expectations. I didn’t want to break the bank on a first bike and the herd is a great option for getting a fast bike with reliable components. I plan on riding this bike for many years to come. Thank you Sava!

@LoveEarthHereAndNow 8 ай бұрын

#Educational