How to remove and install loader John Deere 1025R Subcompact Tractor

No video

How to remove and install loader John Deere 1025R Subcompact Tractor

Рет қаралды 179,238

6 жыл бұрын

How to remove the John Deere 120R loader, put it on the Quik-Park stand, and how to install the 120R loader back on the tractor.
► Buy John Deere Parts - go.west-equip....
► Need help finding John Deere parts? We would love to help! Call (806)557-2948
► Subscribe to our channel
/ west-equip
► Follow Western Equipment on Instagram
/ westernequipment
► Follow Western Equipment on Facebook
/ westernequipment
#JohnDeere #Deere

Пікірлер: 103

@truenorthliving_ 3 жыл бұрын

Thanks for the video! After waiting a week for my husband to detach the front loader, I watched this video like 10 times and did it myself! 😀

@WesternEquipment 3 жыл бұрын

Awesome! I'm glad I could help and thanks for watching!

@lexyeliserichars 2 жыл бұрын

Love this 😅Doing the same haha

@MIJJ555 4 жыл бұрын

Just bought one of these. I’m in Ocala, FL. I’m watching all these video to learn how to use it. Thanks for these! They are exactly what I need!

@WesternEquipment 4 жыл бұрын

Awesome, glad I could help. How are you liking it?

@bobrocks25 4 жыл бұрын

JAMES SEIDEL Hi James, I just bought a small place in Ocala, what size property are you using this on? It’s on my short list, we have 4.5 acres, about 3.5 in pasture

@MIJJ555 4 жыл бұрын

Western Equipment absolutely loving it so far. Thank you.

@ZomBRaider 3 жыл бұрын

My 1025r just hit 50 hours and needs service....Need to strip it down to get rid of all the extra weight so my Ford Escape doesn't die pulling it to the dealer....This video was helpful.....Thanks!

@WesternEquipment 3 жыл бұрын

Well I am glad I could help and thanks for watching!

@gregsmith9862 Жыл бұрын

First time tractor owner, Thanks for the detailed video, I’ll try this on my 1025r

@WesternEquipment Жыл бұрын

Congrats on your tractor! Were you able to do it?

@8milereb 2 жыл бұрын

I wish all instructional videos were as clear and concise as this one. Most assume we know tractors and implements thus their videos are usually to fast, at a distance, not zooming in on critical steps needed especially for inexperienced owners like myself. Why make an instructional self help video assuming we’re already familiar with tractor nomenclature etc? I just watched this video and was able to easily remove and install my loader on my new JD 1025r. Thank you!

@WesternEquipment 2 жыл бұрын

Thank you and I am glad I could help! Thanks for watching!

@colleenasteevesbos6975 5 жыл бұрын

We wanted to get this to go with the 1025R and now it’s confirmed. Thanks for the tutorial.

@WesternEquipment 5 жыл бұрын

Thanks for watching!

@kenuiB41384 5 жыл бұрын

Wow...I'm sold. Got me a 1025R on the way. Thanks for the tutorial!

@WesternEquipment 5 жыл бұрын

Thanks for watching!!

@christophersiddall7270 2 жыл бұрын

Waiting on mine to get here, you just made that look super easy. Thank you, great vid.

@WesternEquipment 2 жыл бұрын

Thank you and congrats on your new tractor. Thanks for watching!

@kevinconnell355 2 жыл бұрын

thanks for the video i receive my 1023e tractor with 120r loader on Tuesday . Looking forward to working with great equipment

@WesternEquipment 2 жыл бұрын

Awesome! I hope you enjoy it and thanks for watching!

@charlesholt2662 4 жыл бұрын

I’ve had my 1025R for 3 years now and didn’t know how to do that. TY

@WesternEquipment 4 жыл бұрын

Glad I could help!

@bryancopeland9684 5 жыл бұрын

Great video! Just got my 1025r with the 120 loader

@WesternEquipment 4 жыл бұрын

Awesome and thank you!

@09wdg 2 жыл бұрын

Great videos. I have watched all pertaining to the 1025R. Just picked up mine today without an owner's manual. Dealer said it will take two weeks to get the manual in. Your videos are as good as having the manual. Thank you.

@WesternEquipment 2 жыл бұрын

Thank you for the feedback and I am glad I could help. Thanks for watching!

@carriemckalsen6559 4 жыл бұрын

My dad just got one and now that looks so easy a baby could do it

@WesternEquipment 4 жыл бұрын

Good deal! Hopefully this video will help!

@ditkafan1 3 жыл бұрын

Ordered my 1025r last week.

@WesternEquipment 3 жыл бұрын

Awesome I hope you love it! Thanks for watching!

@ambera255 4 жыл бұрын

You make it look so easy! Thank you!

@WesternEquipment 4 жыл бұрын

A lot of practice and thank you!

@genemiller4148 2 жыл бұрын

Well done. Learned a lot.

@WesternEquipment 2 жыл бұрын

Thank you and thanks for watching!

@robbymccormick4617 Жыл бұрын

Awesome video

@WesternEquipment Жыл бұрын

Thank you!

@joshuablankenship4965 Жыл бұрын

Perfect explanation, thanks, big help!

@WesternEquipment Жыл бұрын

I am glad I could help and thanks for watching!

@1squit 3 жыл бұрын

Nice vid; for me the most difficult part is plugging those hose back in -- they just pop back out. I'll have to get the dealer to look at this.

@WesternEquipment 3 жыл бұрын

Yes, I would definitely have that checked but it could just be build up of debris that's not allowing them to lock in correctly. Thanks for watching!

@1squit 3 жыл бұрын

@@WesternEquipment Hi, it turns out I forgot to relieve the pressure prior to disconnecting the hoses, so that made it difficult to re-connect them. The work-around was to press the tips of the hoses against the handle of a large screwdriver (or something) with paper towels or rags to catch any spilt fluid. This relieved the pressure.

@DanyBouchard78 Жыл бұрын

Thank you for this great tuto !

@WesternEquipment Жыл бұрын

Glad it was helpful!

@lc9929 2 жыл бұрын

Everytime I have to reconnect there is pressure I have to release from the loader fittings. Even storing in a building in the shade. Squirts hydraulic oil everytime. I don't have a choice though.

@WesternEquipment 2 жыл бұрын

This is strange. It shouldn't do that.

@digijams Жыл бұрын

Great video, thank you for making it.

@WesternEquipment Жыл бұрын

Thank you and thanks for watching!

@jew0182 4 жыл бұрын

I’m really torn between the Deere and the kubota BX. I’ll be using it for pretty much everything. I think the auto connect deck will be worth it for when it’s time to go do loader work. On the 120r easy park system. I wish they’d add a piece of rubber coating over that bar. I can see it getting all marred up on my shop floor when it skids a little taking it off and on

@WesternEquipment 4 жыл бұрын

I think the rubber on the park stand would be a great idea. I would definitely say if you're torn to go get in the seat and drive both of them or request your local dealer bring one to your place for a demo and pay close attention to the way you drive both of them and how the controls are laid out. operator comfort is key on these little tractors for sure.

@derekbeatty7877 2 жыл бұрын

Do you take off the drive shaft from snow blower under the tractor before u add on mower doing this for father inlaw

@WesternEquipment 2 жыл бұрын

Yes, you would have to have the belly PTO fully exposed to put the mower on. Good question and thanks for watching!

@susanmiller4604 2 жыл бұрын

I am having trouble getting the hoses reconnected. I toggle the lever to release pressure on the tractor and have even tapped the ends of the hoses to no avail. I don’t know if I’m just not strong enough or if there’s something wrong

@WesternEquipment 2 жыл бұрын

The end that is on the tractor may be dirty and that could be making it hard to connect. You may check this and see if that is your problem. I hope this helps and thanks for watching!

@jeffingram8279 2 жыл бұрын

Great video well explained

@WesternEquipment 2 жыл бұрын

Thank you and thanks for watching!

@warped2875 4 жыл бұрын

One glaring error: When you lift the loader off of the stanchions, you are supposed to keep pulling back on the SCV stick until the locking levers on the loader drop back down by themselves, an audible "Clank" ...and the transmission should be in neutral for this process. Only then is the parking stand fully deployed. Also of note: When re-attaching the loader, it is not necessary to lift the locking levers for the install (you can if you want to, but you don't need to).

@WesternEquipment 4 жыл бұрын

Good catch!

@tyhillinc 3 жыл бұрын

Thank you show video how hook up brush hog and drive over mower

@WesternEquipment 3 жыл бұрын

I have both of those. Here is the drive over mower kzfaq.info/get/bejne/i9aEachll7CumKs.html and here is the brush hog hookup with the iMatch system kzfaq.info/get/bejne/iOCAltuj2dHOk2g.html. Thanks for watching!

@dougmeader2772 2 жыл бұрын

it would be nice if you drove the tractor around after the disconnection. After I disconect it I am not just going to back it off and back on

@WesternEquipment 2 жыл бұрын

My apologies. After it is disconnected you are free to drive and do whatever needs to be done. I just wanted to demonstrate the full process in as short of time as possible. Thanks for watching!

@geralds4851 2 жыл бұрын

Thank you!

@WesternEquipment 2 жыл бұрын

Thank you for watching!

@Liberty_Tree 2 жыл бұрын

Nice training vid. Good Stuff

@WesternEquipment 2 жыл бұрын

Thank you and thanks for watching!

@AppleUser 5 жыл бұрын

Thank you VERY much for this video

@WesternEquipment 5 жыл бұрын

Thank you for watching!

@joelnickerson6739 Жыл бұрын

That's how I did it on my 2017 but on my new 2023 I have a different connection. One lever and all 4 connections come off.

@WesternEquipment Жыл бұрын

Oh nice you have the single point connection! I wish they would have had that when we did this video. Sooooo much easier!

@rockhounder4730 5 жыл бұрын

Lot of good tips in this vid!

@WesternEquipment 4 жыл бұрын

Thank you!

@terryhughes2021 4 жыл бұрын

Great video

@WesternEquipment 4 жыл бұрын

Thank you!

@4Jeffv 5 жыл бұрын

there was a break between you attaching the hydraulics to attaching the loader. I noticed the tractor has moved, was there any issues with alignment or anything that happened then?

@WesternEquipment 5 жыл бұрын

No alignment issues, just a wording blooper. This was filmed on a day that was 110+ degrees and words were starting to escape me haha. Good catch, and thanks for watching!

@RoseCityReptilesTX 3 жыл бұрын

Thank you

@WesternEquipment 3 жыл бұрын

Thank you and thanks for watching!

@studdruppo 4 жыл бұрын

How well do subcompact tractors keep their value?

@barryblanchard7852 4 жыл бұрын

Craig S My experience selling an almost new Kubota BX is that it depends upon dealer and manufacturer financing available at the time. With no money down and 0% financing on a new tractor it really makes it more difficult to sell a used one and the price drops quickly.

@WesternEquipment 4 жыл бұрын

There is a ton of truth to what Barry Blanchard said! All in all they hold their value very well, but a cautious buyer market can sometimes skew those values.

@johngallucci77 2 жыл бұрын

I’ll add that I was just in the market for a used one (at first) in or near Rhode Island and I found that 1) there weren’t many used ones out there that were easy to find anywhere within 600 miles of RI (so most people are clearly holding onto them for the long term), and 2) I would be spending just about as much as a new one would cost for one that’s 5 to 10 years old or more. Ultimately, I couldn’t find any deals that made buying used more attractive than buying new (especially with all the promotions and deals out there with the dealers now). My takeaway was that these machines hold their value like crazy, so I bought new with great financing terms plus the peace of mind that if I ever needed to sell it in the future, I could easily get most (if not all) of what I paid for it new.

@peteraltman6374 3 жыл бұрын

Does anyone know how much the loader attachment weights

@WesternEquipment 3 жыл бұрын

So according to John Deere specs the loader weighs around 625 lbs. and the standard bucket weights around 183 lbs. I hope this helps. Thanks for watching!

@Nap6791 5 жыл бұрын

Great video's!

@WesternEquipment 5 жыл бұрын

Thank you and thanks for watching!

@barryblanchard7852 4 жыл бұрын

You said removing the loader increases the turning radius. Doesn't it reduce the turning radius?

@WesternEquipment 4 жыл бұрын

Correct! I spoke incorrectly in the video, by removing the loader you decrease the overall length of the machine, in turn you are reducing turn radius! Great catch!

@davem145mxr 2 жыл бұрын

Those quick connects are a real pain in the butt

@WesternEquipment 2 жыл бұрын

What part are you having trouble with?

@davem145mxr 2 жыл бұрын

@@WesternEquipment the hydraulic quick connect couplers on the loader

@frankzahn4712 3 жыл бұрын

Thank you for this fluff video. After owning one for 10 months i dont use the bucket often. Especially when mowing. Although please show everyone how to install this bucket after being off 4 weeks and somehow the bucket starts to " fall to earth" and pressure is now in the line. Please show how "Easy" it isnt. Please demonstrate how the psi is purged so you can put the line back on. Thats an Educational video, not this salesman pitch from the dealership.

@WesternEquipment 3 жыл бұрын

Sorry to hear that you're having such trouble! We'll pass the word along and keep in mind this needs to be talked about in another video.

@JWP6948 4 жыл бұрын

What flew off at 5:10?

@WesternEquipment 4 жыл бұрын

I'm pretty sure that was just a bug flying through the shot! I just watched it about ten times trying to figure it out! HA!

@user-jn6st7nd6q Жыл бұрын

Looking for a back hoe to fit 1026r

@WesternEquipment Жыл бұрын

Your best bet would be to get in touch with your local dealer. Where are you located?

@user-jn6st7nd6q Жыл бұрын

I live in Braxton county West Virginia

@dainsorensen142 Жыл бұрын

Don’t do this if your 1025R has a cab. It’s a nightmare to get the hydraulics hooked back up!

@WesternEquipment Жыл бұрын

Thanks for the tip! I did not know this and had never tried on one with a cab. Do you like your cab on your 1025R?

@dainsorensen142 Жыл бұрын

@@WesternEquipment I do and I don’t! Pros and cons. Great when it’s winter time in Saskatchewan. Not so good when doing yard work and want to hop on and off tractor quickly. Also great when it’s windy. The cab is way to close to the hydraulics and there is no room for your hands unfortunately. I took my loader off once and won’t be doing it again.