I tried your method trying to remove the drain with needle nose and vice grips, but the cross head inside the drain just snapped off. Maybe too much force on my end. What can I do now to remove the drain?
@funbro1 Жыл бұрын
I’ve had to do this several times…not an easy proposition. What I did was ground a slot in the top of the drain and then I had something I could use a hammer and chisel on to loosen it. Hardest part doing it this was is trying to keep from damaging the tub. Can’t grind too deep and have to be careful using the hammer and chisel. I’m sure there are other ways but this has worked several times for me. Hope this helps, thanks for watching.
@terrapreta1 Жыл бұрын
Exact same thing happened to mine.
@terrapreta1 Жыл бұрын
kzfaq.info/get/bejne/ZtafgpOX0N-bfas.html
@farhadr7255 жыл бұрын
Perfect amount of information without blabing, and wasting time to make longer video. And he actually knows what he's doing. Great video.
@vinniedevito68704 жыл бұрын
Well said. Exactly my observation.
@funbro14 жыл бұрын
Thanks for watching.
@brucewilliamsstudio49323 жыл бұрын
I looked at a couple of these videos and this is absolutely the best one! Great job Bob.
@joaquinmeza16903 жыл бұрын
Amen brother. I hate that crap.
@jamesng98313 жыл бұрын
This is the most straight forward demo without wasting viewers' time. Thanks.
@Mersipher4 жыл бұрын
Thank you for the detailed video. You're the only person from 4 videos I watched that showed the rubber washer replacement and the plumbers putty. It's the details that count. Thank you for covering those 101's.
@funbro14 жыл бұрын
Thanks for watching.
@Mersipher4 жыл бұрын
@@funbro1 - Only one thing next time. Remind people to take out the old one and measure it's internal diameter width and thread type. I just tried to do it from your video to memory. Went to home Depot right after work. Grabbed the basic old school type. Went home took old one out, puttied it, grabbed new to screw in after prep. Nope!!! My dumbass didn't measure. Fucked my whole night up now since my wife is pissed she can't bath. I say that because me second dumb thing was to throws that old shitty rubber gasket away. Do'h!!! Still think your video was great. Cheers
@x31omega3 жыл бұрын
Yep thats where i went wrong.
@jasonnorton24684 жыл бұрын
Thank you so much, my kids bathroom drain broke and after your video, a quick trip to the hardware store ($10) and about 10 minutes I had it fixed! Very much appreciate the video!
@funbro14 жыл бұрын
Glad the video was a help, Thanks for watching.
@ahitchcox2 жыл бұрын
Very good video. I love it when you get right to the point without wasting time. My drain was really stuck, probably from plumber's putty. I was afraid of breaking my needle-nose pliers, so I'm glad this shows what the tool looks like.
@funbro12 жыл бұрын
Thanks for watching.
@truenorthernfreedom31042 жыл бұрын
Great video, I just found a puddle in the basement under the tub drain and saw it was leaking where the pipe goes into the tub, I've never tackled a tub drain before, I've done plenty of sink drains and when I didn't see a threaded connection under the tub and I was unsure of how it connects. Now I am wiser from your teachings. I greatly appreciate how clear and calm your explanation was and I look forward to perusing more of your content..
@funbro12 жыл бұрын
Thanks for watching.
@KevinPeffley5 жыл бұрын
Fantastic! If I’d known how easy it was going to be, I’d have done this job years ago. Thank you so much!
@funbro15 жыл бұрын
Thanks for watching.
@jayclark35925 жыл бұрын
The drain started to leak into my downstairs ceiling and I found the rubber gasket was too thin and would spin around. I followed your instructions and used a thicker gasket. The repair worked great! No more leak!! Before your video, my wife was on me to call a plumber. Thanks for your expertise and saving me the cost of plumber.
@funbro14 жыл бұрын
Thanks for watching.
@michaelriggs49413 жыл бұрын
A no-nonsense video that shows the exact steps. You also showed how my messed-up drain was assembled wrong. The rubber washer was in the wrong spot (between the drain assembly and tub not between the tub and drain pipe) and was causing a gap. Great video!
@funbro12 жыл бұрын
Thanks for watching.
@askee793 жыл бұрын
Hey Bob. I never comment on vids but this one just saved my bacon. Daughter(16) was cleaning litter boxes and decided to "rinse them out". This was in her bathroom. I was able to get the drain off and cleaned out thanks to your help. I have never taken one of these off before and had no idea but don't want to call a plumber yet. Cheers to you.
@funbro13 жыл бұрын
Glad I could help, Thanks for watching.
@dandravh33262 жыл бұрын
This simple to follow tutorial resolved my slow drain issue in less than 10 minutes. Thanks a bunch 🙏🏾
@funbro12 жыл бұрын
Thanks for watching.
@mattpete99963 жыл бұрын
Great video! I discovered the seal was not installed correctly 15 years ago. I’m not handy and this video made my day.
@funbro13 жыл бұрын
Glad it helped! Thanks for watching.
@ericbatchelder51054 жыл бұрын
Thanks Bob! Like others have mentioned, this was a perfectly balanced presentation of instruction and visual aid.
@funbro14 жыл бұрын
Awesome! Thanks for watching.
@roamiblu18336 жыл бұрын
Quick and easy. In fact, you showed me what I needed to do in the first 15 seconds! Thank you! Just subscribed! Looking forward to seeing more DIY videos from you.
@funbro16 жыл бұрын
Awesome, Thanks for watching
@tmfeldman39905 жыл бұрын
Thank you, excellent instructional video. Like someone else already said "this is the only video that got it right" thanks again.
@funbro15 жыл бұрын
Thanks for watching.
@c.c.harvey68322 жыл бұрын
Thank you so much for making this video it helped me out a lot as I live a hour out of town where there is not much hardware stores to go to but you showed me how I could do it by myself with a needle nose pliers and after one full turn and a half it was snug- tight thinking I would have to tear apart the whole wall when it was just a simple fix and thanks to you I don't have to worry about it leaking and how much water damage it could do overtime I'm glad you made this video to help us out. Thank you keep up the good work.😉👍
@funbro12 жыл бұрын
Thanks for watching.
@xTheRedShirtX2 жыл бұрын
He made it seem so easy and didn't have to tell me a life long story about how a drain was made. Nice work.
@funbro12 жыл бұрын
Thanks for watching.
@Arlimisttv3 жыл бұрын
Thank you my dude. So many videos that are much longer accomplishing the same that you just said, but you did it much clearer in much less time.
@funbro13 жыл бұрын
Awesome! Thanks for watching.
@trschin2 жыл бұрын
Best video I’ve seen on this subject. Short, precise and to the point! Thank you
@funbro12 жыл бұрын
Thanks for watching.
@normakeiller43233 жыл бұрын
Camera shot was close up, steady and clear. Bob got right to the point no preamble about why you need to change the drain blah blah blah! I think he’ll be my “go to guy”!
@funbro13 жыл бұрын
Thanks for watching
@simonelaguerre44843 жыл бұрын
This was the best video because it's the right amount of info that was straight to the point and concise. And I did this replacement all by myself so thanks!
@funbro13 жыл бұрын
Glad it was helpful, Thanks for watching.
@heatherwerner45303 жыл бұрын
Yes, the perfect amount of info. The part about the rubber gasket was exactly what I needed. Thank you for giving me the confidence to do it myself!
@funbro13 жыл бұрын
Glad it was helpful, thanks for watching.
@ryanjohnstun14165 жыл бұрын
Great video it helped a ton and I love the trick with the needle nose pliers! It saved me from having to buy the drain tool
@funbro15 жыл бұрын
Glad it helped, Thanks for watching
@cullenpassmore19332 жыл бұрын
Little videos like this add so much to my life and solve so many problems. It's really Under appreciated. Thank you for the help
@funbro12 жыл бұрын
Glad it was a help to you. Thanks for watching.
@MitchMoyers3 жыл бұрын
Perfect... straightforward and helpful. Especially if you don’t have all these specific tools for specific parts. Thanks!
@funbro13 жыл бұрын
Glad it was helpful! Thanks for watching.
@delta_angel84695 жыл бұрын
Thank you so very much for this video!!!! You showed me exactly what I needed to do!
@funbro15 жыл бұрын
Awesome! Thanks for watching.
@tomclark91423 жыл бұрын
Perfectly SUPERB, Bob! You just enhanced my life, sir. Well Done.
@funbro13 жыл бұрын
Wow, thanks! Thanks for watching.
@ashleybellasxo4 жыл бұрын
Many thanks for this content!!! Appreciate the straightforward and focused explanation!
@funbro14 жыл бұрын
Glad it was helpful!
@cathyb44794 жыл бұрын
Thank You for the easy instructions and tips,,,I just replace the plumber putty on my drain and the casket was in good shape so i kept it ,,My first plumbing repair,,i did the happy dance when i was done !!!
@funbro14 жыл бұрын
Excellent! Thanks for watching.
@mrmtruckermax22 жыл бұрын
This is the perfect info I was looking for. Very precise and close up on the content. Thank you for this.
@funbro12 жыл бұрын
Thanks for watching.
@justwam76195 жыл бұрын
Easy and to the point with no annoying music and well filmed.
@funbro14 жыл бұрын
Thanks for watching.
@squibblez25173 жыл бұрын
Great video! Helped me solve my drainage issues. It was very informative and concise.
@funbro13 жыл бұрын
Glad it helped! Thanks for watching
@jeanettebalram53312 жыл бұрын
Thank you. This video was exactly what I needed. Clear and concise instructions.
@funbro12 жыл бұрын
You're welcome! Thanks for watching.
@kokeshi83525 жыл бұрын
Bob!!! Thank you. Clear and precise.
@funbro15 жыл бұрын
Thanks for watching.
@TheConrad104 жыл бұрын
Great video - right to the point and nothing but what I wanted to see. Great job
@funbro14 жыл бұрын
Thanks for watching.
@nosirrahm3 жыл бұрын
Thank you! I had to sit in the tub and push the wrench with my foot using care to not become the Hulk and push the wrench through the tub wall to loosen the old one. I’m very proud of myself. I’m a YT graduate of plumber school 101. 👩🏽🎓
@funbro13 жыл бұрын
Great job! Thanks for watching.
@carolynmeyers66786 жыл бұрын
Thank you so much Your video was so very helpful It was easy to follow And you save me money from someone else doing it Again Thank you
@funbro16 жыл бұрын
Glad to be of help, Thanks for watching.
@karenkirkpatrick73374 жыл бұрын
Great video! Concise and to the point. Very informative.
@funbro14 жыл бұрын
Thanks for watching.
@carsonskjerdal4732 жыл бұрын
Wow first time doing anything remotely plumbing related. Instructions were perfect! Thanks for making this!
@funbro12 жыл бұрын
Awesome! Thanks for watching.
@jeffthompson15305 жыл бұрын
Thank you for this video! Very helpful and to the point!
@funbro15 жыл бұрын
Thanks for watching.
@aflan9659 Жыл бұрын
Thank you for this!!! Our T bars just broke and I was clueless on what to do, so this should help me fix it up. Again, thanks!!
@funbro1 Жыл бұрын
Thanks for watching.
@lross67315 жыл бұрын
This is exactly what I was looking for. Thanks!
@funbro15 жыл бұрын
Thanks for watching.
@nsbaum5 жыл бұрын
Hi Bob! Very informational. One follow up question, your shoe looked incredibly clean, what did you use to clean it out?
@funbro15 жыл бұрын
It doesn’t get that much use but a foaming cleaner works well. Thanks for watching.
@WJHandyDad5 жыл бұрын
that's a great video on replacing the drain plug... please do a follow up one on how to change out the drain itself (the pipe below that you threaded the stopper into)
@funbro14 жыл бұрын
Stay tuned. Thanks for watching.
@Krankie_V3 жыл бұрын
Thanks! I've got a pretty badly corroded drain in one of my bath tubs which I want to replace before the cross in the bottom actually breaks and makes it much more difficult to remove. I may just go looking for that drain tool because it appears to make things so much easier.
@funbro13 жыл бұрын
The tool definitely makes it easier. Thanks for watching.
@alexlodi51034 жыл бұрын
Extremely succinct, to the point. Top notch. Thank you.
@funbro14 жыл бұрын
Glad you enjoyed it! Thanks for watching.
@SteveZ-yd6em2 жыл бұрын
Thanks bob for making my life so much easier!
@funbro12 жыл бұрын
Thanks for watching
@MD-pm6nc3 жыл бұрын
My new apartment has a terrible maintenance staff and the drain was bad. I have two toddlers that need to take baths and not showers and they’re taking baths tonight from what I leaned here. Thanks bob.
@funbro13 жыл бұрын
Awesome! Thanks for watching.
@XPLSV3573 жыл бұрын
Perfect...just what I was looking to find! Thanks!
@funbro13 жыл бұрын
You are welcome! Thanks for watching.
@stanluikart21882 жыл бұрын
Thank you. Great demonstration and instructions. You saved me some money.
@funbro12 жыл бұрын
I love saving money. Thanks for watching.
@brandonbennett6383 Жыл бұрын
Great instructions!!! Straight to the point...thanks
@funbro1 Жыл бұрын
Thanks for watching.
@TerriLeeHolm4 жыл бұрын
Thank you, that was super easy and very informative!
@funbro14 жыл бұрын
Glad it was helpful! Thanks for watching.
@daviddedick145 жыл бұрын
Thanks, this is very helpful. (Thought I was going to have to cut a hole in the wall.)
@funbro15 жыл бұрын
Thanks for watching.
@carussell19043 жыл бұрын
WD40 and a pipe wrench and now my 35yo drain is starting to loosen. Thanks for the great tips and the video.
@carussell19043 жыл бұрын
A few notes after an all afternoon project... 1. I spent an hour looking for a replacement gasket and eventually had to buy a new drain assembly just to get the gasket. 2. The newer drains seem thinner compared to the old solid brass one I have so I ended up wire brushing the old one to re-use it. 3. I used pipe tape but left the end threads exposed to get it started straight. 4. I re-did the plumbers putty and ended up with double the amount I used at first. 5. I tightened up the drain right to point that I thought it might strip so it’s really tight. Water test right afterwards worked well.
@funbro13 жыл бұрын
Good stuff!
@user-dg5hi6ij8n2 жыл бұрын
Very informative, Bob.... you saved us lots of time and stress... Thanks soooo much! Lmb
@funbro12 жыл бұрын
Thanks for watching.
@randywebb70523 жыл бұрын
simple and to the point. thank you very much. and thank you for not blabbing on and on!
@funbro13 жыл бұрын
Thanks for watching.
@yeet37184 жыл бұрын
This was excellent, thank you!
@funbro14 жыл бұрын
Thanks for watching.
@alidi41442 жыл бұрын
Great information and you did not fiddle around like most people and bore me to death was perfect
@funbro12 жыл бұрын
Can’t stand waiting through 2 minutes of bologna just to get to the start of a video. Glad it was a help, thanks for watching.
@johnbueno24335 жыл бұрын
Just a note I had a little problem with it coming out so I heated it up to break up that Plummer putty. They say to use a blow dryer for a couple min. but I used a pro pane touch for about 45 sec. came out like butter. Thanks for the video.
@funbro15 жыл бұрын
I would be weary of using propane doing this but glad it worked for you. Thanks for watching.
@kimberlybaer8614 Жыл бұрын
Thank you! I had no idea how to do it!
@funbro1 Жыл бұрын
Thanks for watching.
@robertapetrin48964 жыл бұрын
Thanks for this video and the trick to get the drain out without that special tool. My only problem was that I wasn't able to get the old rubber gasket out. It was really jammed in there and I may have damaged it while trying to get it out. Is that going to be a problem for me down the road?
@funbro14 жыл бұрын
I would definitely recommend replacing the gasket to avoid possible future issues. Thanks for watching.
@ericbenjamin84522 жыл бұрын
Thank you for this!! Perfect amount of information
@funbro12 жыл бұрын
Thanks for watching.
@calvert482 жыл бұрын
Great explanation and description. Thank you for sharing.
@funbro12 жыл бұрын
Glad it helped, thanks for watching.
@scottmeaden5386 Жыл бұрын
Really good and helpful video, thank you!
@funbro1 Жыл бұрын
Glad it was helpful!
@20o8.s4 жыл бұрын
Thanks to this I fixed my drainer Thank you😇😇 Didn’t won’t my mom to find out after work
@funbro14 жыл бұрын
Glad it helped, Thanks for watching.
@papapickett72675 жыл бұрын
Great video, excellent results.
@funbro15 жыл бұрын
Thanks for watching.
@JimzAuto3 жыл бұрын
Screw seemed stuck, couldn’t turn the drain by hand. A pair of pliers and LIGHT counterclockwise force and it began turning! Removed, then could properly access the screw for removal. Thanks for this helpful video.
@funbro13 жыл бұрын
Thanks for watching.
@DaveOJ5 жыл бұрын
Thanks for the video. My stopper had a screw attached that has to be loosened before I could remove the stopper.
@funbro15 жыл бұрын
I have seen some like that before. Thanks for viewing
@paulallen58913 жыл бұрын
Very good video. Answered my question about installation. The instructions with the new drain assembly I ordered say to apply thread seal tape to the male threads on the drain assembly. Do you think the thread seal tape is necessary?
@funbro13 жыл бұрын
A little would not hurt but the gasket should do the trick and the tape may make it harder to align the threads causing a cross-thread situation. (No good). Hope this helps, Thanks for watching.
@AAA-ob5wq2 жыл бұрын
Best explanation ever! Does the putty need to cure before the tub can be used?
@funbro12 жыл бұрын
Nope good to go right away. The washer underneath does all the sealing. Thanks for watching.
@ef2b5 жыл бұрын
Do you need anything on the threads of the drain assembly like tape or compound?
@funbro15 жыл бұрын
No thread tape is needed, there should be a rubber gasket that goes between the tub and bottom of the drain, that is what does the sealing. Also use some plumbers putty on the top between the drain and tub. Hope this helps, thanks for watching.
@chadb78582 жыл бұрын
Very awesome video, I'm experiencing that issue now, I'll update on how it goes. The drain is broken however and hard to get out at all
@funbro12 жыл бұрын
It can be difficult but if you have access to below the tub that can make it easier. Thanks for watching.
@dyscea4 жыл бұрын
Thank you. Thinking about resurfacing the tub and instructions say to remove metal fittings. 👍
@er54904 жыл бұрын
Same here!
@funbro14 жыл бұрын
Thanks for watching.
@kitchenproject15775 жыл бұрын
Thanks for sharing: now I have no doubts as to what I need to do.
@funbro15 жыл бұрын
Awesome! Thanks for watching.
@jwgmail3 жыл бұрын
Perfect: good images, concise but complete explanation.
@funbro13 жыл бұрын
Glad it was helpful! Thanks for the view.
@scottslaba63643 жыл бұрын
Great info. I loosened my tub drain and it turned as if it was unscrewing, but then it would not come out. I don't see any apparent reason whyit shouldn't come out, but wondered if you had any ideas why this would be so and what you might suggest short of calling a professional.
@funbro13 жыл бұрын
Do you have access the the bottom of the tub drain?
@aliciarosie2203 Жыл бұрын
This video was the most helpful I've found! Thank you so much!! Side question...do you know how to remove the jets? 😊
@funbro1 Жыл бұрын
This tub had no jet’s. Thanks for watching
@ryannelson63903 жыл бұрын
Great video. Well explained.
@funbro13 жыл бұрын
Glad it was helpful! Thanks for watching.
@j19m12k14d12 жыл бұрын
Excellent Video. Thanks
@funbro12 жыл бұрын
Thanks for watching
@meandragon04 Жыл бұрын
My man. Thank you
@kendraasbury16643 жыл бұрын
Thanks for the video!
@funbro13 жыл бұрын
You're welcome! Thanks for watching.
@alexeilers4765 жыл бұрын
I've done exactly what you've showed time and time again however I'm still getting a leak any idea what I might be doing wrong?
@funbro15 жыл бұрын
Make sure the rubber gasket is between the tub and the waste shoe. Also make sure not to use too much plumbers putty. Hope this helps, Thanks for watching.
@torontoclister73272 жыл бұрын
Perfect tutorial!
@funbro12 жыл бұрын
Thanks for watching.
@jessicapiechowski23553 жыл бұрын
Awesome video thank you!! 😊
@funbro13 жыл бұрын
You are so welcome! Thanks for watching.
@BrendaEstes5 жыл бұрын
Best instructions!
@funbro15 жыл бұрын
Thanks for watching
@rgelsh13 жыл бұрын
Excellent vid, thank you
@funbro13 жыл бұрын
Thanks for watching.
@7judas774 жыл бұрын
excellent video! Unfortunately, the cross thing is completely broken in mine and I have no idea how to get the ring out without tearing up the fiberglass around it. Any suggestions?
@funbro14 жыл бұрын
That type of extraction is much more difficult. many times it requires bending a corner of the drain up (carefully as to not damage the tub) then grabbing the piece that is bent up and twisting. All this assuming you have NO access to the underside of the drain. Hope this helps. Thanks for watching.
@7judas774 жыл бұрын
@@funbro1 thanks for the quick response. I will (carefully) give that a try!
@elleseelove16914 жыл бұрын
Thank you for this video. Where did you purchase your replacement at?
@funbro14 жыл бұрын
Local hardware/plumbing supply store. Lowe's has them but you need to buy a whole kit and use only the parts you need. Hope this helps, Thanks for watching.
@hongdo90984 жыл бұрын
Thank you very much. It is my big concern.
@funbro14 жыл бұрын
Thanks for watching.
@buckmccoy51023 жыл бұрын
Thanks for your assistance.
@funbro13 жыл бұрын
You are welcome, Thanks for watching.
@faizanganso81994 жыл бұрын
I am a woman watching it. Thank you so much for helping out
@funbro14 жыл бұрын
You are so welcome!
@tommccourt19533 жыл бұрын
Great presentation thanks!
@funbro13 жыл бұрын
Thanks for watching.
@MrB12310 ай бұрын
What would you recommend doing? If after removing the shoe drain cover, the shoe drain is covered in gunk. I noticed that when you transition between the two shots that it went from being very cranky to spotless. What would you recommend?
@funbro110 ай бұрын
I would just use an all purpose cleaner to clean it, or replace the whole thing. Thanks for watching.
@bunmonk19033 жыл бұрын
Thanks Bob! I can't wait to change my nasty drain
@funbro13 жыл бұрын
Glad to help, Thanks for watching.
@myrddinbishop Жыл бұрын
Does it matter what kind of drain I buy from the store? Just trying to get an idea what to look for.
@pantera64 жыл бұрын
So just to be clear, the washer you put between the tub and drain was from the replacement piece that video shows you taking off the new drain piece?
@funbro14 жыл бұрын
I replaced all the old parts of the waste shoe with new ones. Hope this helps, Thanks for watching.
@Devoid5845 жыл бұрын
Quick and easy vid to follow!
@funbro15 жыл бұрын
Thanks for watching.
@jeffhaze65482 жыл бұрын
Thanks for showing how to replace the washer. Last video I watched the guy used the washer up against the new drain, then putty and screwed it in...
@funbro12 жыл бұрын
Glad it was a help. Thanks for watching.
@GingerMom2 жыл бұрын
Hi Bob! Do you have any tips for getting the new rubber gasket in? I can’t get the pipe to push down at all, even with the overflow cap, screws, etc..removed. The guy at the plumbing store said that would help but it will only move side to side. The gap is only about a millimetre and I need about a centimetre of space. I tried to use a flat head screwdriver but that isn’t working either. I can’t get the gasket in for the life of me. 😭
@funbro12 жыл бұрын
You may have to gain access to the drain under the tub. It is possible that there is something built up under the drain keeping it tight up against the tub. Hope this helps, thanks for watching.
@humdec4 жыл бұрын
Thanks for this. After removing the old drain, the PVC under the tub dropped down far enough so the new drain cant reach it. Any ideas before I make a hole on the wall to push it up?
@funbro14 жыл бұрын
Oh no, That is no good. If you cannot reach it from above and you have a finished ceiling below then unfortunately you will need to cut a hole in the ceiling below to get it reattached. The part that concerns me is why it dropped so low? It should be seated up against the bottom of the tub and if it fell down like you described then it is possible that your drain is under stress (someone has pushed it into place to make it fit) or something is loose. Either way it may be a good idea to open it up just to inspect the plumbing. Sometimes I will cut a small hole and use my phone to video the area , that way the hole is not so large and I get a good view of the plumbing. Hope this helps, I wish you the best. Thanks for watching.
@humdec4 жыл бұрын
@@funbro1 Yes, I too do think something was pushing it up. The old drain was so corroded that I had to use a Drain Extractor, the kind you hammer inside the old drain and then twist with a wrench. The instructions say "tap lightly with a hammer" but it kept coming off. So maybe an unsecured piece of wood was holding it up, then it felt out of place after the hammering, which I had to do almost a dozen times. Anyway, I was able to lift the PVC with my finger and although it would go back down slowly, I tried without the plumbers putty, and it give me enough time to reach the treads with the new drain. I hope now I can do it with the plumbers putty. If I cant, then I'll make a hole. My question now is, if I make that hole on the back wall (plumbing wall) could I see what's going on? I'm just thinking that thru a wall it'd be easier to fix whatever needs to be fixed.