How to Remove and Replace a Clutch Cable Line on a Harley Davidson Sportster

No video

How to Remove and Replace a Clutch Cable Line on a Harley Davidson Sportster

Рет қаралды 5,209

ThatMotoGal

Күн бұрын

Пікірлер: 61

@josedaniel4725 2 ай бұрын

You and I both need a garage 😀 I live in Texas and right now it's 110° so a garage and fan will help Big Time. Doing repairs on car or bike always have to gather all tools if I have to go inside for something cause they will walk away 😊 thanks for the video 👍🏼👍🏼

@thatmotogal 2 ай бұрын

Exactly! Nothing like a place with all you need around you and safe from the elements. 🤘🏽🏍️

@josedaniel4725 2 ай бұрын

@@thatmotogal Vaya con Dios

@thatmotogal 2 ай бұрын

@@josedaniel4725 igualmente :)

@57FinnDalcassian Ай бұрын

i'm impressed. great job girl.

@thatmotogal Ай бұрын

Thank you! 🤘🏽

@geo.037 6 ай бұрын

You done an awesome job. A quick helpful point. Remove one of the bolts holding the foot peg and loosen the other. Now you can rotate it out of your way and get that final torx on the derby cover and /or the bolt on the cable. It is amazing how much money you can save by learning to do simple tasks on your bike. Happy Riding.

@thatmotogal 6 ай бұрын

I agree 100%! Having to pay for parts and labor can get very expensive. Especially if you do it at the dealership. About the foot peg, believe me, I tried I couldn’t get that bolt loose 🥲 I think I need better tools.

@WagyuYeti 6 ай бұрын

Good job.

@thatmotogal 6 ай бұрын

Thank you! I tried hehe

@davidc4737 6 ай бұрын

Enjoyed the vid..good job with the clutch cable and nice camera work too ! Your voice is so relaxing to listen to ! I also have 2014 Iron 883 )😁👍

@thatmotogal 6 ай бұрын

Thank you! I’m glad you liked it. And Sportsters rock! 🤘🏽🏍️

@davidc4737 5 ай бұрын

@@thatmotogal yep Sportsters rock ! I was at local Harley dealer..not sure im feeling the new sporsters though..dont sound the same or have the character of the older ones. Whats your thoughts on the new sporsters ?✌

@thatmotogal 5 ай бұрын

@@davidc4737 I agree with you. Not a fan, I would rather get a bigger bike than a Sportster.

@davescupper5789 3 ай бұрын

Better when taking off the derby cover to undo each bolt crossways, ( the bolt's opposite to each other) and not in a circle ( the bolt's next to each other), and get into the habit of doing that with any cover or where there a bolt's surrounding an engine part. You did well threading the cable back into the clutch engine cover, that can be tricky 😊

@thatmotogal 3 ай бұрын

Thanks for the tip! I’ll definitely do that next time 🤘🏽🏍️

@rowdyriemer Ай бұрын

Considering how shaky Sportster engines are, it sure wouldn't hurt to use blue loctite on those screws.

@thatmotogal Ай бұрын

You’re right…. 😅

@ChiChigetdayayo1977 5 ай бұрын

Great videos. It's like ASMR. Helps me sleep. Haha, keep up the posts . Love'em ! Are you Peruvian?

@thatmotogal 5 ай бұрын

“Helps me sleeps” 😂 thanks! I’m Mexican.

@ChiChigetdayayo1977 5 ай бұрын

@@thatmotogal awesome ! Keep riding !!

@gelrova 6 ай бұрын

love your video

@thatmotogal 6 ай бұрын

Thank you! 🤘🏽🏍️🔧

@Jonathansr5723 6 ай бұрын

Love the motorcycle

@thatmotogal 6 ай бұрын

Thank you! Me too 🙌🏽🏍️

@jamesrand9971 6 ай бұрын

Go Ana Go!

@thatmotogal 6 ай бұрын

🤍🤍🤍

@DanMirkz 6 ай бұрын

I'm not 100% sure on this as not yet a HD owner (soon I hope!) however, is that a groove on the derby cover to have aligned with where your clutch cable comes out? You might have to spin that around to the left a bit more to align it better. 11:16 - Apologies if that's not the case, just looks like an indentation for it.

@thatmotogal 6 ай бұрын

I see what you’re saying, I’ll check it out. I honestly thought there was no wrong way to put it back on. I’ll get back to you :)

@gurseshalil 6 ай бұрын

Hi sis. Your iron bike is great. I want to ask you a question. I want to buy Harley Davidson 883 super low or iron 883. What do you think I should do?

@thatmotogal 6 ай бұрын

In my opinion, you can’t go wrong with a Sportster. I love mine. They stopped manufacturing them recently, but you’ll still be able to get a bunch of parts and do lots and lots of mods :)

@dannyn6850 6 ай бұрын

All depends on your preference. They both perform the same, just cosmetics. Super Low sits the lowest, hence the name super low, with a ground clearance of just under 4" and seat height of 27" I think ? and it comes with the chrome engine, ect. Iron 883 has a ground clearance of 5.5" and seat height is 29" and comes completely murdered out black. I personally have a iron 1200, absolutely love it. I'd go 1200 instead of 883 as well. just as easy as a 883 and you're going to want the extra power eventually, specially on highway. the only thing the super low wins at is having a higher fuel capacity at 4.5 Gal compared to 3.3Gal on a Iron.

@thatmotogal 6 ай бұрын

@@dannyn6850 this is true. You can customize them however you want though. My iron 883 has a seat height of 26” so it’s super low. I also got the Hooligan Kit by S&S Cycle and made it 1200. I haven’t done anything about the tank but at least it’s not a peanut tank 😅

@dannyn6850 6 ай бұрын

@@thatmotogal Bet that S&S kit made a world of a difference, my cousin wants to do it on his 883 too. I can't stand the 3.3 tank, definitely going 4.5 someday. The customization options are endless with sportys, people can give it all the crap they want, but they're bulletproof, light and fun to throw around.

@thatmotogal 6 ай бұрын

@@dannyn6850 I agree 100%. The Sportster is already a classic in my opinion. Yes! The kit made a big difference. Super happy with it. My pipes are from S&S too, great combo. I’ll get the air filter from them soon.

@Donny.C.wlWilliams 22 күн бұрын

👍🏽

@thatmotogal 21 күн бұрын

Thank you 🤘🏽

@stevew271 6 ай бұрын

Awesome

@thatmotogal 6 ай бұрын

Thank you Steve!

@kyliethompson6243 5 ай бұрын

Some pointers from Angel Whitehorse bad biker build might be helpful to you

@thatmotogal 5 ай бұрын

Is that a KZfaq channel?

@BurlyBrand96 5 ай бұрын

#SQUAD

@thatmotogal 5 ай бұрын

100%

@AngelFaceMotoRider 6 ай бұрын

Sis, would you like me to tell you about the other Female Motorcycle Channels that I know-of in Los Angeles.? I am watching this video of yours now, my way to support your MotoChannel. 😸

@thatmotogal 6 ай бұрын

Sure! Leave a few here :)

@AngelFaceMotoRider 6 ай бұрын

I know-of a lotta Female MotoChannels in California, but here are 10 that I know live in Los Angeles; Redline Ravens, Annette Carrion {RiP}, Mizziel Serra, Riding with Kee, Biker Chick Lidia, Ms_peachiii Motovlog, GIXXER SISTERS, Kimberly Botbyl, luckybear57 & Live To Ride

@thatmotogal 6 ай бұрын

@@AngelFaceMotoRider it will take me a minute to check them all out, but I will :)

@AngelFaceMotoRider 6 ай бұрын

No Pressure Sis. Just do whatever makes you Happy. I just want you to feel WELCOME in our YT MotoCommunity. I've been here since 2013.

@thatmotogal 6 ай бұрын

@@AngelFaceMotoRider I appreciate it :)