Thanks man, we body techs greatly appreciate short, and to the point videos like these.

I loved this video. It was a very clear picture and explained very well. A HUGE help. Thank you.

Just replaced my fender using this video. Thanks for the video. It took me about 6 hours to replace the fender. Due to the fact you need to remove the grill and light. I also had to transfer all the hardware from one fender to the other. Patience is all you need.

Best video on this topic yet. I'm glad that I searched one last time. This guy is a very effective speaker. The other videos were okay but they didn't appear to be enjoying what they were doing. In most of the other videos that I have watched the mechanics were fighting the bolts, and complaining about how difficult it is to do this on the driver's side of a Silverado.This guy obviously enjoys what he does. I would just say that if you don't enjoy this kind of work then you should consider taking your vehicle to someone who does, or you could end up causing more damage, and costing yourself more money. This kind of work is what some of us live for. We crave it, feed off it, and we almost never give up. Almost because sometimes we pick each other's brain for the experience, and wisdom there in. Sometimes a different set of eyes and ears can make for a more efficient way. Anyway we know who we are so I'll stop now🤪 Thanks for the video

Thanks so much for putting this out there. I’m replacing the fender on my Silverado tomorrow. I was a little worried about it but you’ve put my mind at ease.

That was the easiest removal I ever thought thank you!!!!

Nice. Thanks. Working on that tomorrow. Good job editing as well

ty so much this helped me so much today!!

Thanks for sharing, hope you and wife had a great New Year.

Very helpful thank you 👍

Great video super helpful thank you.

Very helpful thank you!!

You made it look easy I got a 2002 fixing to try it

Helps a lot , is long process to me I'll do it for sure

Nice job thanks

Thanks for the great video, I need to remove my 2011 Tahoe passenger side fender to troubleshoot / fix a rain water leak. I see that the wheel well coming along with fender as one piece, that simplifies a bit. Is removing front bumper and grill required before fender removal? thanks

Damn that's alot of step to do to remove the side fender

Love it!!!!

Thanks buddy

You make it look easy my dood.

What year is the truck?

Any advice for removing/pulling the fender forward if it's pushed up into the door? I can't open the door, so no access to those bolts on the inside.

Once you remove fender and are replacing it with an after market fender what will you have to take off original fender and put on new fender. The liner has to come off and there is a bracket with two bolts. I have the bracket but do not remember how it bolts on the fender

Looks pretty straight forward

Thanks for the video. Question: Are the pre-painted fenders you can buy matched pretty good color-wise?

Is the process the same for passenger side? Tired to follow step by step but no tray just my air intake and battery. Is the bolts I need to get to under all that?

wow! I was looking for guidance on whether to buy a 2018 Chevy silverado that got hit front side... The driver fender was taken off and the headlight and front grille assembly. But the fender was scaring me till I seen you take it off. Has 35,000 miles and there asking $6600 But Im gonna have to come up with some parts... i think it's worth it.

Thanks bro

Do you have a video for the passenger side? Or where I can find one?

I miss the old Chevy fenders so much easier to take on and off and to line up

I have a 2016 GMC Canyon and I hope the fender removal is about the same my wife backing out destroyed the passenger front fender

Can you run no fenders on a 2014 Silverado ? Or does the headlights bolt into it?

To install fender is it straight bolt on or is alignment needed to get straight body gaps?

You made it look easy but not easy enough for this old man to tackle.

Is the passenger side the same in terms of mounting

Do you have a video for the passenger side fender?

Can you use Silverado fenders on a gmc sierra

Is it the same for. 2018 Sierra

Do you have to remove the bumper and grill to do this ?

Looks easy let’s trying

Donyou have to remove the bumber? Im about to start doing this

Do you have to remove bumper in order to do this?

Do you have a tutorial for the right fender???

its the same for a 15 silverado?

Can you make a video for the passenger side?

Is it the same process for a 2019 Chevy Silverado 2500 WT?

What year models is this for

Its the same for a Chevy 1992..??

from where did u get your fenders from which sites

U have a go pro ?

How long did it take to remove it?

Where are you located bro?

the other videos?

I was going to remove the fender but I think I will just bump it out

Is it the same process for a 01 Chevy

Los demás videos??

et un gros Mercie car je doit changer mais deux rockeur .

Similar to 99-06 🙏🏽

How you gonna start the video with half the car already taken apart???

What a nightmare 🤦🏻‍♂️

Not gonna lie I hate Silverado fenders 😭😭😭 if I can repair them I will definitely repair them

Wow to much work for fender why they made it that hard

Have to take off the whole car to take a fender off no more new cars for me

Dude just scrap the truck..thsts all its worth sadly

Too fast poorly explained when you say remove this bolt,it would be nice to identify the bold as being a fender bolt or a brace bolt sorry this is just ment to help you make a more professional clip

Most useless video 😂 with all the jump cuts